MIB Required for Bandwidth Monitoring on Cisco 3800 and 3900 series Routers

Hi Team,
Need your help here.
I am planning to do Bandwidth Monitoring on Cisco 3800 and 3900 series Routers. I want to know the exact MIB which I need to use for getting this done.
Thanks,
Karthik Anbumani

Matt, based on feature navigator GLBP is supportted on 3800 series.
Go to this link and search by feature (GLBP)
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTH
Jorge

Similar Messages

What is the minimum browser requirements for Captivate 5? (Specifically Flash and Java)

I create a Captivate from and upload it to our LMS. When employees access the course it takes a long time for it to load. My IT department is asking what is the minimum browser requirements for Captivate 5? Specifically Flash and Java. This is occuring on PC's and a Citrix environment.

Hi there,
Thanks for reaching Adobe Community. Please accept my apologies for the same.
There is nothing in specific. When you say it takes a long time, do you mean on the LMS or locally as well?
Try updaing the Flash Player.
You can download the Falsh Player Versions from the below link:
http://www.adobe.com/support/flashplayer/downloads.html
Which browser you are using?
Also what objects you have in your project?
Does it have widgets or heavier graphics?
Also are you using any particular preloader? Have you tried using the default.swf preloader?
Thanks!

Is SAP-OSS RFC Configuration required for Technical Monitoring ?

Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure technical monitoring for system and self-monitoring.
Thanks In Advance,
Satheesh E

Hello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh

NWDI Stack requirements for NWDS, ECC CE 7.1 and PI 7.1

What is the requirement for NWDI 7.0 with respect to other usage types. I think the rule is this:
NWDI and NWDS (dev studio) should be on the same SP level, whereas NWDI can support simultaneous 7.0 and 7.1 track like Portal BI and PI?
Anyone care to comment or refute?
Thanks
Mikie Brogan

I am not aware if there is any such requirement other than the compatible java version.
NWDI doesn't support ABAP content, you will have to configure CTS+ and probably CTS+ with NWDI.
For NWDS - NWDI, no you do not need same versions, you need same java versions.
I am using NWDS NW70 SP14 (have used SP8, SP10) with NWDI 7.0 SP18.
Make sure you ahve the relevant java versions.
If you plan to use NWDI70 with CE71, you would need to understand how to set dual java versions in NWDI and how to support it in track.
That is also possible.
Regards,
Nitin

App-specific passwords: are they required for the iOS versions of iMessage and Facetime?

I was recently prompted to generate app-specific passwords for iMessage and FaceTime on my Mac. The process went reasonably smoothly, but after doing this I wondered whether I'll need to do the same on my iOS devices.
The Apple Support page Using app-specific passwords - Apple Support offers no clues about which Apple apps require them and on which devices.
As a test, I tried signing out of iMessage on my iPhone, and signing back in with my regular Apple ID password, not an app-specific one. This worked fine, therefore I assume the iOS versions of iMessage and Facetime do not need app-specific passwords.
On the other hand, I've read some of the articles which state that the iOS versions of iMessage and Facetime will require app-specific passwords:
http://arstechnica.com/apple/2015/02/apple-extends-two-factor-authentication-to- facetime-and-imessage/
Does this mean that app-specific passwords have simply not been "rolled out" to my devices yet, and we'll be prompted to generate app-specific passwords on iOS at some random time in the future?
If so, that's a problem for non-technical users in my household on whose behalf I look do setup and security. It will effectively mean iMessage will stop working for them, until I can take a look at the issue. This is not always something that can be done quickly if we're in different locations.
If I pre-empt the roll-out by visiting https://appleid.apple.com/account/manage/security and generate and install an app-specific passwords for them anyway, before the prompt appears, will this work?

So far the app specific passwords were only required for 3rd party apps, not for "Apple apps". Not sure why you cannot use trusted device verification for iMessage and FT like on the App store or iTunes. or on Apple TV.
Having to generate a different app specific password for every device that uses iMessage or FT is a pain, but I guess the powers that be at Apple feel it is more secure.

100% Noob - Need Help for basic setup of Cisco 2504 and 1600 AP

Hello,
I am completely noob in (cisco) networking.
I have to setup a basic but secure wireless network.
I have a cisco 2504 and 2 APs 1600 + a random switch
I have 4 ports on the controller.
I want to keep the 1st port on the network for the controller management, plug my internet box on the 3rd port, and my switch on the 4th port. Then the AP will be on the switch.
I am able to make something working when everythings are plugged on the switch, plugged in the first port (default management port).But this is not what I want.
First thing, Is that possible ?
1st port : office network
2nd port : empty
3rd port : Internet Box
4th port : Switch + all APs
Then, if that is possible, how should i configure the controller to make that work ? I am completely lost in the menus.
I dont need a perfect configuration, just something simple and working.
1 SSID, 10 DHCP addresses, block wireless users trying to go on the office network.
If anyone could help my doing that, It would be very nice.
Thank you.

You basically need two SSIDs one for corporate users and second for guests .check the link with step by step config and brief details .
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html

MIBs required for "HP Smart Array P420/1GB FBWC"

Hi,
One of our customer purchaged "HP Smart Array P420/1GB FBWC
" to integrate that we required the following details.
-          MIB
-          Alarm Documentation
-          Alarm List
-          Features like AlarmUpload
                 Is it supported?
                 If yes how to perform(eg., set based/get based etc.,)
Could you please help in getting the above details for "HP Smart Array P420/1GB FBWC"
Thanks in advance.
Ezhil

Hi:
You may also want to post your question on the HP Business Support Forum -- ProLiant Storage Systems section:
http://h30499.www3.hp.com/t5/ProLiant-Storage-Systems/bd-p/itrc-265#.VG4Bo3ktC9I

MIB help for trap monitoring of IP SLA Breach or track using CA Spectrum

I am trying to generate a trap based on sla breach on a IOS XE router. What MIB could I use?
Here is the config from the router:
track 1 ip sla 1 reachability
ip sla 1
icmp-echo 50.232.60.177 source-interface GigabitEthernet0/0/3
ip sla schedule 1 life forever start-time now
ip sla logging traps
snmp-server enable traps ipsla
Syslog Entry
Mar 27 17:45:00.455: %TRACK-6-STATE: 1 ip sla 1 reachability Down -> Up

Hi,
You can configure the IP SLA Reaction configuration & generate the traps based on many conditions, you can choose whatever suits you.
Example Configuring an IP SLAs Reaction Configuration
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_threshold_mon.html#GUID-A459B9AF-188D-4676-9876-19993266B32A
Example Configuring an IP SLAs Reaction Configuration
In the following example, IP SLAs operation 10 is configured to send an SNMP logging trap when the MOS value either exceeds 4.9 (best quality) or falls below 2.5 (poor quality):
Device(config)# ip sla reaction-configuration 10 react mos threshold-type immediate threshold-value 490 250 action-type trapOnly
The following example shows the default configuration for the ip sla reaction-configuration command:
Device# show ip sla reaction-configuration 1
Entry number: 1
Reaction Configuration not configured
Router# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# ip sla reaction-configuration 1
Router(config)# do show ip sla reaction-configuration 1
Entry number: 1
Reaction: rtt
Threshold Type: Never
Rising (milliseconds): 5000
Falling (milliseconds): 3000
Threshold Count: 5
Threshold Count2: 5
Action Type: None
- Ashok
Please rate the useful post or mark as correct answer as it will help others looking for similar information

Bandwidth monitoring with Cisco LMS4.0

Hi everybody,
I am using Cisco LMS 4.0 to manage a company network distributed in many town. I need to known about bandwidth utilization between the sites on a per interface basis.
We are experiencing network connection problem and the ISP ensures us that he is providing the right bandwith between the sites.
Can someone help me please.

Hi everybody,
I am using Cisco LMS 4.0 to manage a company network distributed in many town. I need to known about bandwidth utilization between the sites on a per interface basis.
We are experiencing network connection problem and the ISP ensures us that he is providing the right bandwith between the sites.
Can someone help me please.

Need assistance in Ciscoworks LMS 3.2 for enable monitoring of cisco switches

Hello,
I am new to the ciscoworks LMS 3.2. I have a task to add a devices in ciscoworks and configure the SNMP on the devices and ciscoworks both. My company has bought the ciscoworks LMS3.2 in 2009 december since then one engineer has configured some devices in it but not fully. I tried to look into the guides and documentation but has huge stuff. My infrastructure lead also not familiar of ciscoworks tool. I know there is lot of documentation in it but I have very less time say this weekend I have to activate monitoring of devices in ciscoworks LMS 3.2. Can anyone please provide me the screenshots or step-by-step procedure to how to enable a device for monitoring who has prior experience on ciscoworks LMS 3.2.
Regards,
Ahmed

Regarding SNMP reachabilty, you are the man........ thats true the firewall is blocking, because the subnets for the swithces which i m trying to add into the ciscoworks are not added into the firewall. Those subnets are different than the other 20 switches which are shown as reachable.
and regarding the swithces which are already seen reachable, based on the document you have provided me for alert and monitoring of a device. I checked the DFM and configured as it is but still i didn't see any of the alert when I turned off one of the 4506E power supply. Is there something I am missing it.
What do you need from my side to provide information or screenshot so that we can sort out the issue of monitoring of the device. Should I get an alert even if the device goes down?
regards
Ahmed

Questions about Feature Licenses for 1800, 2800, 3800, 2900, 3900 series ISRs

Hey all,
I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
"If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
If yes:
And if so, how do I go about purchasing a license? Is a support contract needed?
Again, I need to know for each Cisco ISR series. I'd appreciate any help on this.
Thanks,
John

You probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.

Extended Support contract required for 10.2.0.5 PSU and SBP

Hi all
There are important changes regarding the terms of use of the Oracle Bundle Patches during the Oracle Extended Maintnenance period for Oracle Version 10.2.
For more information, see Hot News [SAP Note 1654734|http://service.sap.com/sap/support/notes/1654734] (SAP Service Marketplace logon required).
Best regards, Aidan
Follow us on [Facebook|http://www.facebook.com/SAPonOracle#!/SAPonOracle] and [Twitter|http://twitter.com/#!/SAPonOracle].

Hi,
Thanks a lot.
Yes, I just saw in the support exactly what you said. No PSU available for our Linux version of x86-64.
I would appreciate if you could correct me if I am wrong regarding OPATCH for DB HOME...for the purpose of ROLLING RAC .
oracle:> opatch apply -local -oh /u01/app/oracle/product/db10.2.0
I will only stop instance running at db01 node. I hope this above opatch command is used for ROLLING RAC witn no downtime option, isn't it?
Best Regards

System requirements for hardware when using one server and 9 terminals?

Hi, in our school there are 9 terminals connected to one Multipoint server 2011 (CPU: Intel xeon e3-1226v3 8M cache, 3.30GHz, 32RAM).
In my opinion the choice of hardware is not suitable for so many terminals.
The question is:
What hardware do we need if our students worked with those programs in the same time - Corel Draw, Photoshop, ect.
Thank you!

Photoshop can be a bit pig heavy. The CPU you are using is only Quad Core and NOT Hyper-Threaded.
A bit underpowered for that many users on that App IMHO.
Also, are the clients direct connected, USB, or RDP ?
If you want to keep that machine in service, you could get another identical box and split half the users to the new one.
If you really want them all on the same box, I would prob replace the current one with something like a Lenovo TD340. Config with at least a single 6 Core XEON CPU, or Dual Quad XEON w/ Hyper-Threading, 64GB Memory, NVidia Quadro K4000 ( If there are any
direct connections ) and at least 2 10k SAS HD's. Preferably 4x 10k SAS HD in RAID 10.
SpecSheet
http://www.lenovo.com/images/products/server/pdfs/datasheets/thinkserver_td340_ds.pdf

HT5957 is there any plan to activate SMS facility on apple IPAD 4, as its required for the used of i bank and transaction

I am using IPAD4 WIFI + Cellular model MD524HN/A
I think if SMS facility for cellular will be more helpful to use ibank and other application.

Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
Keep in mind that this is also a carrier issue. Most of the carriers (in the U.S., at least) only activate iPads on data only plans that do not allow for texting.
Best of luck.

Cisco B and C series server restart problem

Hi,
When upgrade Cisco Server's memory, The servers restart 4-5 times. Why is this restarts a lot of time ?

Hello Mehmet,
Please consider following issues :
Please browse to following page for more infomation :
http://www.cisco.com/en/US/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting.pdf
Regards

MIB Required for Bandwidth Monitoring on Cisco 3800 and 3900 series Routers

Similar Messages

Maybe you are looking for