Mic causes screen to go blank

the mic button when texting in landscape will cause the screen to go black for a second or two. This only happens when texting in landscape with the volume bottons on the top it diesn't do it in landscape if the volume buttons are on the bottom. This issue seems to affect more than my 4s please look into this issue when making 5.0.2
Thanks

Thanks, jasonwryan. Adding nomodeset to the grub kernel load line allowed me to boot up and see the command prompt and log in.
/var/log/Xorg.0.log fromt the last boot attempt had this error message:
(EE) system-logid: failed to get session: PIC 245 does not belong to any known session
After studying the man page for Xorg.map, I added this file:
/etc/X11/Xwrapper.config
allowed_users = anybody
needs_root_rights = no
That fixed the screen blanking problem and now I can boot up as before the big upgrade.

Similar Messages

Time Machine causes screen to go blank when starting backup

Time machine causes screen to go blank when it starts backup. I have cable wireless modem with ethernet to time machine; then ethernet to computer. Cable company just increased speed to 30. What may be happening? I am afraid of losing all my data. Screen recovers within one second, but it goes completely blank when time machine starts backup

Time machine causes screen to go blank when it starts backup. I have cable wireless modem with ethernet to time machine; then ethernet to computer. Cable company just increased speed to 30. What may be happening? I am afraid of losing all my data. Screen recovers within one second, but it goes completely blank when time machine starts backup

Connecting IPOD causes screen to go blank and computer is locked

I am running Windows XP and have all software updates. I have updated to the latest version of Itunes. Every time I plug in my IPOD Nano, the Nano says do not disconnect and the computer locks up with a blank screen. This did not used to happen. Can someone help me out?
Frustrated in Florida

Thanks, jasonwryan. Adding nomodeset to the grub kernel load line allowed me to boot up and see the command prompt and log in.
/var/log/Xorg.0.log fromt the last boot attempt had this error message:
(EE) system-logid: failed to get session: PIC 245 does not belong to any known session
After studying the man page for Xorg.map, I added this file:
/etc/X11/Xwrapper.config
allowed_users = anybody
needs_root_rights = no
That fixed the screen blanking problem and now I can boot up as before the big upgrade.

Firefox is causing my imac screen to go blank (crash) and I have to restart. Most of the time its random, but recently it did it everytime I finished listening to an audio file online. Is there a solution for this?

Firefox is causing my imac screen to go blank & I have to restart. It's been happening randomly for weeks now. I haven't been able to tie an action that causes it. Firefox is open while I work in other adobe software. Recently it has done it every time the audio file finished that I'm listening to online and that makes me think it's tied to Firefox. Is there something I can do to fix this? For now, I am going to quit firefox while I work and see if that doesn't improve my situation for now.

Does it still happen if you disable all plugins?
Did it start happening after a Firefox update or a plugin update?
*https://support.mozilla.org/kb/Troubleshooting+plugins

T41 screen suddenly goes blank - possible overheating?

Having an intermittant problem with my T41, and wondering if anyone has any idea as to the cause.
Most of the time, I use it in a docking station. Sometimes, after I've been using it for a while, the screen suddenly goes blank. There's still hard drive activity, as the light keeps on flashing, but the screen stays blank no matter what I do. The only way out is to do a hard reboot via the power button and, when I switch it back on again, the screen comes back, but usually some of the desktop icons have changed places. One time, the screen resolution had also been reduced to 800x600, and I had to reset it back to 1024x768.
I have noticed recently that, when it does this little screen shutdown trick, the fan doesn't seem to be operating and, if I remove the computer from the docking station, it does seem a bit warm underneath. Then, when I reboot the computer, the fan kicks in right away and seems to be pushing a lot of heat out of the vent in the side.
So does anyone know if this is an overheating issue caused by the fan not kicking in when it should, or could there be another cause? One thing that has me confused is that, according to the Windows fault reporting system, it says its a video driver fault and I should update the driver. So can anyone tell me just what the problem really is?
Edit:
I've been able to find one of the manuals as a PDF, and it seems like the computer is unexpectedly hibernating due to the CPU overheating. Unfortunately, that's all it says, and doesn't give any advice as to how to fix the problem. Does that sound like a correct diagnosis?
Solved!
Go to Solution.

Don't know why this topic has been marked as "solved" when it's still an ongoing problem - I certainly didn't mark it as such!
Installed the program you suggested, and ran a few tests. From those, it looks like the issue could be the CPU, not the GPU, that's been overheating and causing the hibernation. With the computer just idling, the CPU temperature reports about 35-38 degrees C, while the GPU sits around the 40-44 degrees C mark. Playing a HD flash video, the GPU temperature went up to around 50 degrees C, while the CPU went up to 69 degrees C. At that point, the fan hadn't kicked in, so I switched from Smart to Manual mode, at which point it started in Mode 7 and brought the CPU temperature back down.
I then ran the test again a few more times with different videos and, with Smart mode selected again, the fan did kick in automatically at around 66 degrees C on the CPU temperature, but only in Mode 1. This seem to just stabilise the temperature, not bring it down, and I had to go to Manual mode to get a higher fan speed.
Before I installed the fan control program, I don't think the fan was kicking in at all, as there was no sign of air coming out of the vent. The only time the fan did kick in was after the reboots, and then only for a minute or so. The program seems to show that both the CPU temperature sensor and the fan are working OK, but it appears that they aren't talking to each other properly. Any ideas why this could be?

My start up screen comes up blank and I can't access anything but system preferences. Can I reset my laptop. It's a MacBook air

Help my start up screen is a blank screen and the only thing I can access is systems preferences. How can I reset my laptop

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My iphone screen randomly went blank and I can't turn it back on, my top button is broken so I can't turn it off without using the little dot thing on the screen... I don't know what to do.. can I restore it using my charger with my itunes??

I was calling it and it was ringing so i dont know whas going on,it still getting messages but i cant see it on the screen because its blank.what to do?

Take it to an Apple store genius bar to have the techs see what your options are for repair/replacement. An out-of-warranty replacement is $149 in the US for the iPhone 4.

My ipad turns in but will not boot up. screen stays blank. I've tried resetting it and rebooting from itunes. It says it is done but the screen still stays blank. The apple icone will show up intermittetly.

I turned on my ipad after charging it and the screen went blank. I tried the home button and on off button and that did not help. I went to iTunes and rebooted the ipad and restored it and it asked me to reboot from the ipad but the screen is still blank. It will go to a blue screen if I hit the on/off button. What else is there to check?

If you restored the iPad, there is nothing else to check. I suggest that you make an appointment at an Apple Store Genius Bar and let them evaluate your iPad.

My iphone 5 screen is gone blank,

my iphone 5 screen is gone blank, but still rings ??? nothing visable on screen,, it makes the noise when its been plugged in to charge etc.. it takes the screenshots... but it wont turn off or answer calls.. when it rigs. the screen is still blank obviously when this is hapening?? any body any ideas

thats not working mate.. nothing on the screen at all.. i wouldnt mind im using the internt off my phone right now.. off my personal hotspot.. as i have the phone pluged into the laptop.. any other ideas

CRASH REPORT Product: Adobe Photoshop CC Application running on: Apple iMac 3.5GHz / Mavericks 10.9.2 Application crashes without warning. . Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application

CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.

Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you!

My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!

My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!

Restart your phone by holding the sleep/wake button and the home button until it starts back up.

Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

hi,
phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

"Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

My screen has a blank section on the right hand side of the screen

since installing updates my screen has a blank section on the right hand side which remains on start up and operation

Hi @Graham1957
Welcome to the HP Support Forums!
I understand that the display has a blank area on the right side, after some updates were performed. I am happy to help with this.
The quickest thing to try would be a system restore. Using Microsoft System Restore (Windows 8)
Choose a restore point from before the problem started, and let me know if this makes any difference. If not, then please post the full product number and verify the operating system in use on your notebook. See the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

InDesign causing others to print blanks pages

Okay so this is a weird issue and I'm getting no results.
My issue is simple. After I print in ID anyone else I work with prints blank pages (We're printing through a network to a device). Also cyan prints incorrectly; however that is fixed if I open the print driver from the print dialog. Now the color thing is a problem through all the adobe software (Illy, Photoshop, Acrobat). No matter which program I use cyan prints wrong. But back to the main issue, strictly ID causes others to print blank. It isn't consistent either. A single document could consecutively cause the blanks then not cause them a little later. We've tried ever print driver possible and the problem persists. Another curious behavior with ID in conjunction with Acrobat is if Acrobat is open and I try to export to .pdf from ID then both programs freeze (however no message of either not responding comes up in the activity monitor) and the preferences are erased from ID
I've spent 4 hrs on the phone with Adobe support and it's just some indian reading from a handbook asking over and over if I deleted my preferences. I've spent days with the printer manufacturer and worked with 7 of their tech specialists and even had them send out a new unit and still the issues. I need to know if the rest of the world is seeing this. Or if this is even close to something someone has seen
So from what I'm seeing is a problem with the PostScript writing that's freaking it out but I'm not software engineer so I can't say for sure.
I'm running CC (though we still had the problems on CS6)
OSX 1.7
ID version 9.2.2
printer is a Konica Bizhub 554e (it's a laser copier)
Thanks,

I actually have created a .pdf and had others print it (a file I create in ID and export to pdf). What ends up happening is if I try to print the pdf people after me get blanks. However if someone else prints it there is no issue. I may have left out an important point I'm the only mac that uses the printer, everyone else uses pc (and I don't know if that's an issue). I only have a postscript driver available (which is good) but i don't know what everyone else is using. I want to say in all of this i heard they have a PCL driver.
As far as the router, I'm hardwired into the network so there is no router. Konica and our IT have checked the network and ruled out that possibility (and I don't really know what that means)
But you are reaffirming the fact it is the printer and they need to fix it. And the fact that a document printed with only cyan is printed with all four colors to give me some weird off color makes me think the disconnect is between Adobe and the printer. But still so weird about the blanks.
Thanks for the input

Help my screen is just blank like a grey?? i cant see anything not even apple sign

help my screen is just blank like a grey?? i cant see anything not even apple sign

Try a reset by pressing and holding the Home and Power buttons until the white Apple logo appears.

Mic causes screen to go blank

Similar Messages

Maybe you are looking for