Mic connected through interface not registering in GB
I'm trying to set up for a podcast, with a starter studio from Behringer. It has a small mixer connected to my MB Pro via USB. The mixer is working, as I can hear myself in the headphones, and I got the theme song for the cast to output into the headphones (which are also connected to the mixer via 3/4" jack).... but I cannot get my voice to register on the recording. I have the output for the Male Voice instrument set to "Stereo 1/2 USB audio CODEC", but nothing... Any ideas?
What version of Garageband are you using?
You also don't want too use a stereo track if you are using one mic (one is Mono) choose the mixer input channel, you're plugged into channel, one on the mixer then your track should be input 1 mono. Make sure the track is armed (record enabled). If you want to monitor from the track enable track monitoring.
Similar Messages
-
Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception - "Interface not registered(Exception from HRESULT:0X...."
I am not able to capture any objects of my web application using coded ui recorder. Even though it is a simple html page, coded ui is showing a message -"Interface not registered(Exception from HRESULT:0X...."
Please give me solution , why this is hapening. I am having problem with object identification. Even I am not able to identify any object in google.com.
swapnanil senguptaTechnologyName is displaying as "MSAA" . But my application is a Webapplication.If I try to spy the google .com's search field then also TechnologyName is displaying as "MSAA". Is it any configuration issue of vsts codedui.
swapnanil sengupta -
Import package: Automation error Interface not registered
Standard Import.dtsx package, which has been working well before fails on Load and Process stage with following error:
Automation error
Interface not registered
This is on 7.0MS SP03 dual server: app server and 64bit MSSQL Server 2008
Did dll got unregistered?
Thanks,
RomanHi,
Please verify if you have EVERESTDMSERVER COM+ Object. Try to shutdown all BPC COM+ components on application server.
Regards,
Mihaela -
Mic Connected through USB adapter gives High pitch voice in playback
My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
And My mic works fine with quicktime audio recording or other audio recording software.hello32 wrote:
My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
most likely the sample rate of your audio interface is too low, it must be set to 44100 in Audio MIDI Setup utility.
similar to the issue of an imported file playing too fast/high pitched:
http://www.bulletsandbones.com/GB/GBFAQ.html#toofast
(Let the page FULLY load. The link to your answer is at the top of your screen) -
KABA connection issue - program not registered
I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.
Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor. -
Problem with RFC connection - tp program not registered
Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
PeterHi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr -
BOEDGE - SM59 Connection RFC = Program Not Registered
Hello,
I installed on a server Windows Server 2003 SP1 32bit:
- BO Edge 3.1 (BuildVersion = 12.1.0.914)
- Java Connector 2.1.9
- Integration Kit for SAP 3.1 SP3 (BuildVersion = 12.3.0.601)
I see on the CCM (Central Configuration Manager) my services correctly started:
Apache Tomcat -- Running
BW Publisher Service -- Running
Server Intelligence Agent -- Running
I installed on the BW server the transport order of BOBJ INTG for "BOBJ INTG for SAP XI 3.1 FixPack 3.1" (BuildVersion=12.3.1.684).
I created a RFC connection type TCP/IP and test my new connexion and I have a error message:
Connexion Erreur connexion
Détails err. Error when opening an RFC connection
Détails err. ERROR: program BW_PUBLISHING not registered
Détails err. LOCATION: SAP-Gateway on host myserver.com / sapgw10
Détails err. DETAIL: TP BW_PUBLISHING not registered
Détails err. COMPONENT: SAP-Gateway
Détails err. COUNTER: 51016
Détails err. MODULE: gwr3cpic.c
Détails err. LINE: 1812
Détails err. CODE RETOUR: 679
Détails err. SUBRC: 0
Détails err. RELEASE: 700
Détails err. TIME: Fri Sep -
Détails err. VERSION: 2
An idea?Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor. -
Hi All,
I have an Outlook COM addin written in C#. It is working without any issues on most client machines, but since of late it has started giving the above Exception for some clients running Outlook 2010.
I understand that the issue is that the particular interface is not registered properly on those machines. I would like to know what in dll that interface is located and what could cause it to be missing? Can it be a component that had been deselected during
the installation of Outlook? If so, what is that component? Or should the dll be manually registered (using REGSVR32)? Or will running a simple repair on Outlook work?
Thanks!!Hello Thimila,
What code do you use exactly?
Try to run the problematic piece of code from VBA as a macro. Do you get the same error message? If so, you need to repair Outlook, it looks like windows registry entries were corrupted.
If you don't get such error in VBA it indicates that you didn't install/copy one of the required prerequisites to the end user PC (interop libraries, .net runtime and etc.). Make sure that all the required prerequisites are installed correctly. See Deploying
an Office Solution for more information. -
DeliveryException: Interface not registered
When calling a Interface on a bpm I get the following exception:
com.sap.aii.af.ra.ms.api.DeliveryException: Interface http://UNO/XI/SMS#SmsInterface not registered
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Interface http://UNO/XI/SMS#SmsInterface not registered</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
This Interface is ok in my testimg environment. This error only occurs in the production environment.
The interface was working correctly. I think this problem started after XI upgrade. System now is to SAP_BASIS 700.
Any clues to this problem? Thanks in advance,
Miguel PereiraSimilar thread found on thread I guess the bean/service is not deployed on PRD. See your SOAP Adapter configuration and test message interface also.
regards,
nikhil -
FTP connections through Finder not reporting correct file size
Hi,
I have a NAS that running as an FTP server. When I connect to it through Finder it reports the incorrect file size of 2.7GB (the real file size is 61GB)
Its an DMG image file so it obviously fails when I try to image a new IMAC.
FTP through windows reports the correct file size so rules out any problem on the NAS.
Any ideas anybody?
Many thanks.Hi,
I have a NAS that running as an FTP server. When I connect to it through Finder it reports the incorrect file size of 2.7GB (the real file size is 61GB)
Its an DMG image file so it obviously fails when I try to image a new IMAC.
FTP through windows reports the correct file size so rules out any problem on the NAS.
Any ideas anybody?
Many thanks. -
wanted to create an RFC between BW and EP
and i am getting an error in BW when checking an
RFC between BW and EP.
Connection Error
Error when opening an RFC connection
Program STEEP_PORTAL not registered
SAP-Gateway on host stebw/sapgw00
DETAIL:TP STEEP_PORTAL not registered
gwr3cpic.c
Return Code:679It was occuring because time in the Java stack and the CRM ABAP stack was different.
Thanks And Regards
Akash Gupta -
I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.
Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card? -
Error 'Program not registered' while testing RFC connection PI_RFC
Hi Basis Experts
I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
Here is the Error log
Logon Connection Error
Error when opening an RFC connection
ERROR: program PI_RFC not registered
LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
DETAIL: TP PI_RFC not registered
Details COMPONENT: SAP-Gateway
COUNTER: 15866
MODULE: gwr3cpic.c
Details RETURN CODE: 679
We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
rfcexec u2013D PI_RFC
the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
Also we tried changing the Gateway hostname and service name in SM59.
Still we are facing the same issue, can anyone please help us in resolving this issue.
Regards
SyedHi,
It seems to like problem with your program is not registered. As suggested by spantaleoni, you can go through.
Here Program Id must be case sensitive. Once again check with your program Id.
And, you have to register your program id in Visual Administrator.
Goto Visual Administrator:
In that Select Cluster>Server>Services-->JCo RFC Provider
Then enter the Program Id and gw host & service.
Hope this helps to you.
Regards,
P.Rajesh -
Physical Interface not present in show ip route connected
Hi,
Thanks for reading my post.
I have a reccurent issue with a CISCO881-K9.
My WAN interface is regularly unsuable even if it's UP/UP. I can't even ping the interface from the router itself.
A reboot solves the issue. But now I have time and I'd like to get a proper understanding of what's going on.
The route doesn't appear in "show ip route connected".
Router#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
FastEthernet4 X.Y.Z.82 YES NVRAM up up
Loopback0 10.31.129.5 YES NVRAM up up
NVI0 X.Y.Z.82 YES unset up up
Tunnel0 10.32.129.1 YES NVRAM up down
Vlan1 172.22.129.102 YES NVRAM up up
Router#ping X.Y.Z.82
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to X.Y.Z.82, timeout is 2 seconds:
Success rate is 0 percent (0/5)
Router#
Router#show ip route
Gateway of last resort is X.Y.Z.81 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via X.Y.Z.81
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
R 10.30.129.0/24 [120/1] via 172.22.129.101, 00:00:08, Vlan1
R 10.31.129.1/32 [120/1] via 172.22.129.101, 00:00:08, Vlan1
C 10.31.129.5/32 is directly connected, Loopback0
172.22.0.0/16 is variably subnetted, 3 subnets, 2 masks
S 172.22.128.0/24 [1/0] via 172.28.28.254
C 172.22.129.0/24 is directly connected, Vlan1
L 172.22.129.102/32 is directly connected, Vlan1
172.27.0.0/24 is subnetted, 1 subnets
S 172.27.0.0 [1/0] via 172.28.28.254
172.28.0.0/24 is subnetted, 1 subnets
R 172.28.28.0 [120/2] via 172.22.129.101, 00:00:08, Vlan1
172.30.0.0/24 is subnetted, 1 subnets
S 172.30.1.0 [1/0] via 172.28.28.254
172.31.0.0/24 is subnetted, 1 subnets
S 172.31.0.0 [1/0] via 172.28.28.254
S 192.0.0.0/16 [1/0] via 172.28.28.254
192.168.48.0/32 is subnetted, 1 subnets
S 192.168.48.247 [1/0] via 172.28.28.254
192.168.84.0/32 is subnetted, 1 subnets
S 192.168.84.247 [1/0] via 172.28.28.254
S 192.168.101.0/24 [1/0] via 172.28.28.254
R 192.168.104.0/24 [120/2] via 172.22.129.101, 00:00:08, Vlan1
Router#show ip route connected
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is X.Y.Z.81 to network 0.0.0.0
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.31.129.5/32 is directly connected, Loopback0
172.22.0.0/16 is variably subnetted, 3 subnets, 2 masks
C 172.22.129.0/24 is directly connected, Vlan1
L 172.22.129.102/32 is directly connected, Vlan1
interface FastEthernet4
description WAN
ip address X.Y.Z.82 255.255.255.252
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly in
ip tcp adjust-mss 1300
duplex full
speed 100
keepalive 3
crypto map MYSTREAM-MAP
hold-queue 224 in
end
Router#show interfaces fastEthernet 4
FastEthernet4 is up, line protocol is up
Hardware is PQII_PRO_UEC, address is 4403.a738.3c02 (bia 4403.a738.3c02)
Description: WAN
Internet address is X.Y.Z.82/30
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (3 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:06, output 00:00:35, output hang never
Last clearing of "show interface" counters never
Input queue: 0/224/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
26675 packets input, 1826301 bytes
Received 12230 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
44029 packets output, 8969818 bytes, 0 underruns
0 output errors, 0 collisions, 4 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
3 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Could you help on this? Or lead me to Tshoot that problem.
By the way the interface 4 is connected to an ISP Modem (TWC in US).
Thanks,
WilliamHi,
Thanks for your answer. I've checked the release notes and there is no bug about that.
I think I must use the WAN interface which is fastethernet 4. I'm not able to change the patch cable for now.
What could be the cause?
show version
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 21-Mar-12 00:27 by prod_rel_team
ROM: System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Router uptime is 1 week, 3 hours, 6 minutes
System returned to ROM by reload at 08:12:54 UTC Fri Oct 3 2014
System restarted at 08:14:30 UTC Fri Oct 3 2014
System image file is "flash:c880data-universalk9-mz.151-4.M4.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
If you require further assistance please contact us by sending email to
[email protected]
Cisco 881 (MPC8300) processor (revision 1.0) with 236544K/25600K bytes of memory.
Processor board ID FGL1652265J
5 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
256K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO881-K9 FGL1652265J
License Information for 'c880-data'
License Level: advsecurity Type: Permanent
Next reboot license Level: advsecurity
Configuration register is 0x2102 -
I am trying to install or update software and the install program can not connect through my internet with foxfire as my default browser. Adobe flash sends me an update notice but when starting the process it bombs out. can not make a connection. Is there a requirement in foxfire to allow certain programs/software to have access??
Launch the QuickTime Player and go "Edit > Preferences > Register", as per the following screenshot:
... that should get you through to the Register Tab in your QuickTime Control Panel.
Maybe you are looking for
-
Forms-need re-editable PDF and download
We are looking to create re-editable forms for our students to update each semester (PDF printable style) but would also love to have results downloaded to a spreadsheet. We have Lifecycle and Adobe Pro X and can get Adobe Pro XI. I'm not terribly te
-
I can't see who's calling me it appears as unknown and i have already saved the contact
I have a problem, I just buy an iphone 4, i created a contacts list in my macbook in the contacts app and sync it to the iphone. But when a contact calls me it appears as unknown. What's the problem??? What can I do???
-
Cannot create Replica in 10.9.5, Compatability Error
I previously had these 2 machines linked, but after destroying the replica and trying to re-add it I get error: Your server cannot become a replica of "server.server.com" because they are running incompatible versions of OS X. Please refer to the ..
-
Again no one in the FF developers group has addressed the horrible Book Mark management system that used to work and is now a tragedy. I spend an hour cleaning up book marks and deleting dozens of old ones. ??-- How do I stop FF Sync from bringing in
-
Connecting iMAC mini to HDMI imput of my monitor
I have an 22'' Asus monitor with 3 inputs (VGA, DVI and HDMI) and connecting my iMAC mini to DVI input (through HDMI->DVI adapter) all works perfectly. But connecting it directly to HDMI input of my monitor, using HDMI-HDMI cable - the image is very