Mic does not work in Valve ga

I have a Creative Labs X-Fi Platinum sound card with the li've dri've bay
extension. I have tried using the mic input on the soundcard card itself and
I have tried using the mic2 inputs and the aux line2 inputs on the dri've
bay. I configured the Creative software and the control panel audio options
for either microphone and the bay inputs and I still can not send chat audio
in games. When I test my mic with sound recorder I get a reading and it does
recoed my voice but when I go into a game the games do not receive my audio.
I tested the audio levels in Day of Defeat and Counter Strike Source in the
options / voice menu. Both programs show the mic working when I do a
microphone test but when I finally go into the game itself again no good I
can not transmit any voice. When I do the microphone test in Sound Recorder
or in X-Fire I here my voice while I talk and then I hear my voice again
with a slight delay. I have the I have tried 2 different headsets that I
know work but still no luck. Any help would be greatly appreciated.
My system is:
Win XP Pro SP2
AMD dual core 4800+
Sound card Creative Labs X-Fi Platinum
Asus A8n-SLI Premium Mobo (on board sound disabled)
EVGA 8800GTX
G Cosair Xtreme mem
All hardware and software have the latest patches and drivers installed.

Your line in or mic in on the I/O bay should show up as line in or Mic in -2. These will not show up as just generic since you obviously have front I/O bay and rear of the sound card jacks. You do have to change your recording source in your mixer before entering the game in Creative control panel, as well as your windows recording properties. change it first in the Windows Recording properties, and then make sure it matches in your Creative Audigy control panel. Do a recording test first using Windows sound recorder. Battlefield 2 may be similar to Call of Duty. I talked to the game developers' studio and they had said that their respecti've games primarily look for the mic on the back of the card and have no provisions for looking for other mic ports that may be avaiilable. This also causes wrinkles with Ventrilo. Mapping your "default recording device" in the Windows Control Panel, and then the Creative Control Panel is cruciial. On my system for example, I use my X-Fi Titanium with my cooler master front panel jacks. But if I run the game once with the headset and mic plugged in to the front jacks, play the game and exit, and then unplug the headphones and mic, the back jack becomes the default again immediately. In my control panel, when my mic is plugged in it says, "Microphone FP". When I unplug it, it only lists "microphone" as a choice. Also with my card I have to set the Flexijack in the back of the card to microphone and not "line in".

Similar Messages

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • My mic does not work On my iPhone 5S when using FaceTime

    The mic does not work when using the speaker either

    Is Mute set?
    On the left side of iPhone above the volume buttons. Red is mute.

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • Bluetooth headset's mic does not work

    I have NB205-312BL netbook and bought Acoustic Research ARWH1 bluetooth headset.
    I am able to pair it with the netbook easily. However, the mic does not work! Only audio playback works.  I know it is not the fault of the headset because the mic works pretty well with a cell phone.
    When I look at Device's properties, I see that the device is identified as a 'headset' but an audio-sink device.
    The mic does not work even if I explicitly select "Bluetooth Wave" as the sound/voice input device.
    The netbook runs Windows XP. It has the latest Toshiba Bluetooth software 6.40.xx installed on it.
    Any help is greatly appreciated. Thanks.

    First you need to get your keyboard fixed. The caps lock appears to be stuck.
    What have you tried, and what symptoms do you observe? "Does not work" does not tell us much.

  • My logitech mic does not work with Audition anymore

    My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

    Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
    Go ahead and delete thread if you like.

  • The T61 internal mic does not work when docked

    The internal mic does not work when docked. However works fine when undocked.
    Does anyone know how to fix this?

    I go this issue very recently. What I did to solve the problem was probably mentioned before somwehre over the web.
    First of all, I degraded Skype from the latest version to skype 6.1.0.129. Then I went in Skype - Tools - Option - Advanced Settings - Automatic Updates and click "Turn off automatic updates" and Save. I closed (Quit Skype) Skype then.  
    I clicked on Start (in toolbar) and in search area typed Device Meneger. Then in Sound Video and game controlers, highlite and right click on mouse on IDT High Definition Audio Codec and press Unistall. This will unistall IDT drivers from the system. You must restart your computer.
    Once you come back after reboot, you must go again to the Sound Video and game controlers and remove the rest part of your driver. After reboot go Sound Video and game controlers and click "Scan for hardware changes" then system find your IDT Sound Card again. Please install the latest driver (6.10.6367.0) and reboot. After reboot you should have mic working while on Skype. 

  • CIT200 Internal mic does not work??

    I am using the CIT200 under WIndows 7. It connects fine to Skype and drivers are installed OK. When I call, the internal mic does not work (phone's internal speaker is fine), but when I plug in a headset, the headset mic (and speaker) works just fine. Does this mean the internal mic is physically damaged, or is there anything I can do software vise to get it to work?

    Hmmm, well never tried to make the CIT200 software on a Virtual PC, but you can give a try and check if that solves your problem or not.

  • Hp pavillion dv4 windows7 mic does not work with google hangout.

    Hi i have a hp pavillion dv4 1503tu laptop. when i connect an external headset it does not work when using google hangout. The same is the case with internal mic. I m able to hear the conversation but they are not able to hear me. works fine with skype. plz help

    What brand and model of headset are you using?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Internal mic does not work !

    I am trying to chat with friends on skype using my i5 MackBook Pro. The mic is not working since they can not hear me, I called the skype help and record my voice but it was not recorded. In the system preferences the level of the internal mic is showing a move while speaking, but it is not working
    Any ideas guys?
    Thanks

    Hussainz wrote:
    I am trying to chat with friends on skype using my i5 MackBook Pro. The mic is not working since they can not hear me, I called the skype help and record my voice but it was not recorded. In the system preferences the level of the internal mic is showing a move while speaking, but it is not working
    Any ideas guys?
    Thanks
    You need to set it up in Skype preferences.

  • Um my mic does not work I've try every thing help??

    It's still not working

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the tope edge near the center.
    - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       
    In the future saying you tired everything provides us with no information as to what you tried. If yo really tried everything then there is no way anyone can help you.

  • [SOLVED] Mic does not work on Intel ICH8 (rev 3) sound card

    Hi, folks.
    I cannot get my sound card to record anything, using a built-in microphone. Audio output works just fine, though. I hope someone can help me, I have been banging my head against the wall for some time over this issue...
    My laptop is Toshiba Satellite A200-1J0 (PSAE6E-04R036G3). alsamixer settings are fine, I tried supplementing additional options to /etc/modprobe.d/modprobe.conf, but no luck, tried some of the combinations (model=<> position_fix=<>).
    When recording sound with gnome-sound-recorder, with Capture set as input, nothing is heard. Skype can't record anything, either. I can't even get the crackling or hissing sound like some users do.
    Should I try to get the latest ALSA?
    Debug details start from now on:
    /etc/modprobe.d/modprobe.conf
    options snd-hda-intel index=0 model=3stack position_fix=1
    lsmod | grep snd
    snd_seq_dummy 1099 0
    snd_seq_oss 25304 0
    snd_hda_codec_atihdmi 2051 1
    snd_seq_midi_event 4452 1 snd_seq_oss
    snd_hda_codec_realtek 179240 1
    snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_hda_intel 18697 1
    snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_codec 56728 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
    snd_pcm_oss 33693 0
    snd_mixer_oss 14810 1 snd_pcm_oss
    snd_hwdep 5102 1 snd_hda_codec
    snd_pcm 57479 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_timer 16117 2 snd_seq,snd_pcm
    snd 43847 13 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_hda_intel,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
    soundcore 5007 1 snd
    snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
    lspci (parts of interest)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Flags: bus master, fast devsel, latency 0, IRQ 22
    Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    01:00.0 VGA compatible controller: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] (prog-if 00 [VGA controller])
    Subsystem: Toshiba America Info Systems Device ff00
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at d0000000 (32-bit, prefetchable) [size=256M]
    I/O ports at 2000 [size=256]
    Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
    [virtual] Expansion ROM at fc020000 [disabled] [size=128K]
    Capabilities: <access denied>
    01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
    Subsystem: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
    Flags: bus master, fast devsel, latency 0, IRQ 17
    Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    alsa-info.sh
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.58
    !!Script ran on: Sat Jan 23 20:27:13 UTC 2010
    !!Linux Distribution
    Arch Linux \r (\n) (\l) DISTRIB_ID=arch
    !!DMI Information
    Manufacturer: TOSHIBA
    Product Name: Satellite A200
    !!Kernel Information
    Kernel release: 2.6.32-ARCH
    Operating System: GNU/Linux
    Architecture: i686
    Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: 1.0.21
    Library version: 1.0.22
    Utilities version: 1.0.22
    !!Loaded ALSA modules
    snd_hda_intel
    snd_hda_intel
    !!Sound Servers on this system
    ESound Daemon:
    Installed - Yes (/usr/bin/esd)
    Running - No
    Jack:
    Installed - Yes (/usr/bin/jackd)
    Running - No
    !!Soundcards recognised by ALSA
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xfc400000 irq 22
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfc010000 irq 17
    !!PCI Soundcards installed in the system
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
    0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
    !!Advanced information - PCI Vendor/Device/Susbsystem ID's
    00:1b.0 0403: 8086:284b (rev 03)
    Subsystem: 1179:ff00
    01:00.1 0403: 1002:aa08
    Subsystem: 1002:aa08
    !!Modprobe options (Sound related)
    snd-hda-intel: index=0 model=3stack position_fix=1
    !!Loaded sound module options
    !!Module: snd_hda_intel
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : 0
    id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
    index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
    patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
    position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 1
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
    single_cmd : N
    !!Module: snd_hda_intel
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : 0
    id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
    index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
    patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
    position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 1
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
    single_cmd : N
    !!HDA-Intel Codec information
    --startcollapse--
    Codec: Realtek ALC268
    Address: 0
    Function Id: 0x1
    Vendor Id: 0x10ec0268
    Subsystem Id: 0x1179ff02
    Revision Id: 0x100003
    No Modem Function Group found
    Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x35 0x35]
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Node 0x07 [Audio Input] wcaps 0x100111: Stereo
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Connection: 1
    0x24
    Node 0x08 [Audio Input] wcaps 0x100111: Stereo
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Connection: 1
    0x23
    Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00]
    Connection: 1
    0x02
    Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00]
    Connection: 2
    0x02 0x1d
    Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x80 0x80]
    Connection: 3
    0x03 0x1d 0x02
    Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x0001003c: IN OUT HP EAPD Detect
    EAPD 0x0:
    Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0f
    Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x0001003c: IN OUT HP EAPD Detect
    EAPD 0x0:
    Pin Default 0x0221101f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0xf
    Pin-ctls: 0xc0: OUT HP
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x10
    Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80]
    Pincap 0x00000010: OUT
    Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x40: OUT
    Connection: 1
    0x0e
    Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
    Amp-In vals: [0x02 0x02]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x00003734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80 100
    Pin Default 0x02a11830: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Black
    DefAssociation = 0x3, Sequence = 0x0
    Pin-ctls: 0x24: IN VREF_80
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x02
    Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
    Amp-In vals: [0x02 0x02]
    Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
    Pin Default 0x99a3093e: [Fixed] Mic at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0xe
    Misc = NO_PRESENCE
    Pin-ctls: 0x24: IN VREF_80
    Unsolicited: tag=00, enabled=0
    Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
    Amp-In vals: [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x00003734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80 100
    Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x02
    Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x20: IN
    Node 0x1d [Pin Complex] wcaps 0x400000: Mono
    Pincap 0x00000020: IN
    Pin Default 0x4016852d: [N/A] Speaker at Ext N/A
    Conn = Digital, Color = Purple
    DefAssociation = 0x2, Sequence = 0xd
    Misc = NO_PRESENCE
    Pin-ctls: 0x20: IN
    Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
    Pincap 0x00000010: OUT
    Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x06
    Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
    Processing caps: benign=0, ncoeff=10
    Processing Coefficient: 0x03
    Coefficient Index: 0x01
    Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
    Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-Out vals: [0x1d 0x1d]
    Connection: 7
    0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
    Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
    Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-Out vals: [0x00 0x00]
    Connection: 7
    0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
    Codec: LSI ID 1040
    Address: 1
    Function Id: 0x2
    Vendor Id: 0x11c11040
    Subsystem Id: 0x11790001
    Revision Id: 0x100200
    Modem Function Group: 0x1
    Codec: ATI R6xx HDMI
    Address: 0
    Function Id: 0x1
    Vendor Id: 0x1002aa01
    Subsystem Id: 0x00aa0100
    Revision Id: 0x100000
    No Modem Function Group found
    Default PCM:
    rates [0x40]: 48000
    bits [0x2]: 16
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
    Pincap 0x00000094: OUT Detect HDMI
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x02
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 9 Jan 23 19:11 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 12 Jan 23 19:11 /dev/snd/controlC1
    crw-rw----+ 1 root audio 116, 8 Jan 23 19:11 /dev/snd/hwC0D0
    crw-rw----+ 1 root audio 116, 7 Jan 23 19:11 /dev/snd/hwC0D1
    crw-rw----+ 1 root audio 116, 11 Jan 23 19:11 /dev/snd/hwC1D0
    crw-rw----+ 1 root audio 116, 6 Jan 23 21:04 /dev/snd/pcmC0D0c
    crw-rw----+ 1 root audio 116, 5 Jan 23 21:04 /dev/snd/pcmC0D0p
    crw-rw----+ 1 root audio 116, 4 Jan 23 19:11 /dev/snd/pcmC0D1p
    crw-rw----+ 1 root audio 116, 10 Jan 23 19:11 /dev/snd/pcmC1D3p
    crw-rw----+ 1 root audio 116, 3 Jan 23 19:11 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 2 Jan 23 19:11 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 80 Jan 23 19:11 .
    drwxr-xr-x 3 root root 280 Jan 23 19:11 ..
    lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:00:1b.0 -> ../controlC0
    lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:01:00.1 -> ../controlC1
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    !!Amixer output
    !!-------Mixer controls for card 0 [Intel]
    Card hw:0 'Intel'/'HDA Intel at 0xfc400000 irq 22'
    Mixer name : 'Realtek ALC268'
    Components : 'HDA:10ec0268,1179ff02,00100003 HDA:11c11040,11790001,00100200'
    Controls : 21
    Simple ctrls : 13
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 64
    Mono: Playback 64 [100%] [0.00dB] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 64
    Mono:
    Front Left: Playback 53 [83%] [-11.00dB] [on]
    Front Right: Playback 53 [83%] [-11.00dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Front',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 64
    Mono:
    Front Left: Playback 64 [100%] [0.00dB] [on]
    Front Right: Playback 64 [100%] [0.00dB] [on]
    Simple mixer control 'Front Mic Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 2
    Front Left: 2 [100%]
    Front Right: 2 [100%]
    Simple mixer control 'Line In Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 2
    Front Left: 0 [0%]
    Front Right: 0 [0%]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 2
    Front Left: 2 [100%]
    Front Right: 2 [100%]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'IEC958 Default PCM',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 12
    Mono:
    Front Left: Playback 0 [0%] [-24.00dB] [on]
    Front Right: Playback 0 [0%] [-24.00dB] [on]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 31
    Front Left: Capture 29 [94%] [27.00dB] [on]
    Front Right: Capture 29 [94%] [27.00dB] [on]
    Simple mixer control 'Digital',0
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 0 [0%] [-30.00dB]
    Front Right: Capture 0 [0%] [-30.00dB]
    Simple mixer control 'Input Source',0
    Capabilities: cenum
    Items: 'Mic' 'Front Mic' 'Line' 'CD'
    Item0: 'Mic'
    !!-------Mixer controls for card 1 [HDMI]
    Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfc010000 irq 17'
    Mixer name : 'ATI R6xx HDMI'
    Components : 'HDA:1002aa01,00aa0100,00100000'
    Controls : 4
    Simple ctrls : 1
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [off]
    !!Alsactl output
    --startcollapse--
    state.Intel {
    control.1 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 64'
    comment.dbmin -6400
    comment.dbmax 0
    iface MIXER
    name 'Front Playback Volume'
    value.0 64
    value.1 64
    control.2 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 2
    iface MIXER
    name 'Front Playback Switch'
    value.0 true
    value.1 true
    control.3 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 64'
    comment.dbmin -6400
    comment.dbmax 0
    iface MIXER
    name 'Headphone Playback Volume'
    value.0 53
    value.1 53
    control.4 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 2
    iface MIXER
    name 'Headphone Playback Switch'
    value.0 true
    value.1 true
    control.5 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 2'
    comment.dbmin 0
    comment.dbmax 4000
    iface MIXER
    name 'Mic Boost'
    value.0 2
    value.1 2
    control.6 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 2'
    comment.dbmin 0
    comment.dbmax 4000
    iface MIXER
    name 'Front Mic Boost'
    value.0 2
    value.1 2
    control.7 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 2'
    comment.dbmin 0
    comment.dbmax 4000
    iface MIXER
    name 'Line In Boost'
    value.0 0
    value.1 0
    control.8 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 31'
    comment.dbmin -1650
    comment.dbmax 3000
    iface MIXER
    name 'Capture Volume'
    value.0 29
    value.1 29
    control.9 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 2
    iface MIXER
    name 'Capture Switch'
    value.0 true
    value.1 true
    control.10 {
    comment.access 'read write'
    comment.type ENUMERATED
    comment.count 1
    comment.item.0 Mic
    comment.item.1 'Front Mic'
    comment.item.2 Line
    comment.item.3 CD
    iface MIXER
    name 'Input Source'
    value Mic
    control.11 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 12'
    comment.dbmin -2400
    comment.dbmax 0
    iface MIXER
    name 'Beep Playback Volume'
    value.0 0
    value.1 0
    control.12 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 2
    iface MIXER
    name 'Beep Playback Switch'
    value.0 true
    value.1 true
    control.13 {
    comment.access read
    comment.type IEC958
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    control.14 {
    comment.access read
    comment.type IEC958
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    control.15 {
    comment.access 'read write'
    comment.type IEC958
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Default'
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    control.16 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Switch'
    value false
    control.17 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'IEC958 Default PCM Playback Switch'
    value true
    control.18 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 1
    comment.range '0 - 64'
    comment.dbmin -6400
    comment.dbmax 0
    iface MIXER
    name 'Master Playback Volume'
    value 64
    control.19 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'Master Playback Switch'
    value true
    control.20 {
    comment.access 'read write user'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 255'
    comment.tlv '0000000100000008ffffec1400000014'
    comment.dbmin -5100
    comment.dbmax 0
    iface MIXER
    name 'PCM Playback Volume'
    value.0 255
    value.1 255
    control.21 {
    comment.access 'read write user'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 120'
    comment.tlv '0000000100000008fffff44800000032'
    comment.dbmin -3000
    comment.dbmax 3000
    iface MIXER
    name 'Digital Capture Volume'
    value.0 0
    value.1 0
    state.HDMI {
    control.1 {
    comment.access read
    comment.type IEC958
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    control.2 {
    comment.access read
    comment.type IEC958
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    control.3 {
    comment.access 'read write'
    comment.type IEC958
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Default'
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    control.4 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 1
    iface MIXER
    name 'IEC958 Playback Switch'
    value false
    --endcollapse--
    !!All Loaded Modules
    Module
    usbhid
    hidp
    hid
    fuse
    radeon
    ttm
    drm_kms_helper
    drm
    i2c_algo_bit
    rfcomm
    sco
    bridge
    stp
    llc
    bnep
    l2cap
    crc16
    coretemp
    ipv6
    snd_seq_dummy
    snd_seq_oss
    btusb
    joydev
    snd_hda_codec_atihdmi
    fan
    snd_seq_midi_event
    bluetooth
    snd_hda_codec_realtek
    arc4
    ecb
    snd_seq
    snd_hda_intel
    iwlagn
    snd_seq_device
    snd_hda_codec
    sdhci_pci
    iwlcore
    snd_pcm_oss
    uvcvideo
    omnibook
    videodev
    snd_mixer_oss
    snd_hwdep
    pcmcia
    tifm_sd
    sdhci
    snd_pcm
    v4l1_compat
    snd_timer
    psmouse
    mac80211
    mmc_core
    yenta_socket
    vboxdrv
    snd
    cpufreq_powersave
    i2c_i801
    uhci_hcd
    r8169
    ehci_hcd
    iTCO_wdt
    intel_agp
    tifm_7xx1
    video
    rsrc_nonstatic
    soundcore
    firewire_ohci
    agpgart
    mii
    i2c_core
    pcspkr
    snd_page_alloc
    pcmcia_core
    iTCO_vendor_support
    led_class
    output
    usbcore
    tifm_core
    serio_raw
    cfg80211
    evdev
    cpufreq_conservative
    battery
    ac
    firewire_core
    rfkill
    crc_itu_t
    thermal
    button
    cpufreq_ondemand
    sg
    acpi_cpufreq
    freq_table
    processor
    rtc_cmos
    rtc_core
    rtc_lib
    ext3
    jbd
    mbcache
    sr_mod
    cdrom
    ata_generic
    sd_mod
    ata_piix
    pata_acpi
    ahci
    libata
    scsi_mod
    !!Sysfs Files
    /sys/class/sound/hwC0D0/init_pin_configs:
    0x12 0x411111f0
    0x13 0x411111f0
    0x14 0x99130110
    0x15 0x0221101f
    0x16 0x411111f0
    0x18 0x02a11830
    0x19 0x99a3093e
    0x1a 0x411111f0
    0x1c 0x411111f0
    0x1d 0x4016852d
    0x1e 0x411111f0
    /sys/class/sound/hwC0D0/driver_pin_configs:
    /sys/class/sound/hwC0D0/user_pin_configs:
    /sys/class/sound/hwC0D0/init_verbs:
    /sys/class/sound/hwC0D1/init_pin_configs:
    /sys/class/sound/hwC0D1/driver_pin_configs:
    /sys/class/sound/hwC0D1/user_pin_configs:
    /sys/class/sound/hwC0D1/init_verbs:
    /sys/class/sound/hwC1D0/init_pin_configs:
    0x03 0x18560010
    /sys/class/sound/hwC1D0/driver_pin_configs:
    /sys/class/sound/hwC1D0/user_pin_configs:
    /sys/class/sound/hwC1D0/init_verbs:
    !!ALSA/HDA dmesg
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
    phy0: Selected rate control algorithm 'iwl-agn-rs'
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:01:00.1: setting latency timer to 64
    Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
    Bluetooth: L2CAP socket layer initialized
    hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x018b0000
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    Bridge firewalling registered
    Last edited by teMplaryum (2010-01-26 10:15:18)

    Hi there!
    I had the very same problem with the same soundcard and found this thread.
    The problem got solved for me by adding the same line as you have to /etc/modprobe.d/modprobe.conf.
    However, I also had to create /etc/modprobe.d/sound.conf and add:
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    options snd-hda-intel model=toshiba power_save=0
    Notice the difference on the "model=toshiba" part.
    However, my laptop is not a Toshiba, but a Compal IFL90.
    I remember that in Ubuntu I needed(a long time ago) to add a line to /etc/alsa.conf with model=toshiba. I figured it might be worth a try, and well, it did.
    I hope this can help someone else.
    As for the OP: "You have my thanks!"

  • L355D-7901 internal mic does not work

    I just got my laptop 3 weeks ago and have tried to use my mic and have not had any luck. When I check my audio devices it says that my high-definition is working. Do you have any suggestions?

    Satellite L355D-S7901
    Test the mic by using Sound Recorder:
       C:\Windows\System32\SoundRecorder.exe
    It's pretty much self-explanatory.
    -Jerry

  • HP Probook 4530s - internal mic does not work when on messenger or skype, webcam does?

    HI there,
    I have an HP Probook 4530s. When I go on MSN messenger or Skpye, the internal webcam works, but the internal mic doesn't. I can't hear them speaking either. However when I tested my internal mic outside of these two places it works perfectly fine - problems?!

    I go this issue very recently. What I did to solve the problem was probably mentioned before somwehre over the web.
    First of all, I degraded Skype from the latest version to skype 6.1.0.129. Then I went in Skype - Tools - Option - Advanced Settings - Automatic Updates and click "Turn off automatic updates" and Save. I closed (Quit Skype) Skype then.  
    I clicked on Start (in toolbar) and in search area typed Device Meneger. Then in Sound Video and game controlers, highlite and right click on mouse on IDT High Definition Audio Codec and press Unistall. This will unistall IDT drivers from the system. You must restart your computer.
    Once you come back after reboot, you must go again to the Sound Video and game controlers and remove the rest part of your driver. After reboot go Sound Video and game controlers and click "Scan for hardware changes" then system find your IDT Sound Card again. Please install the latest driver (6.10.6367.0) and reboot. After reboot you should have mic working while on Skype. 

  • The mic is not working on skype, and its not muted

    Every time my sister or myself go to use Skype on the IMac, the mic does not work, we can hear the person on the other end but they can not hear us, the mic is not muted, and when you go into the sound settings the mic is on the proper setting from what I can tell, and when I go into speech (under speech recognition) the microphone option for built-in microphone is grayed out. I don't what exactly this all means, but if someone else does, and can help me fix this problem I would greatly appreciate it.

    I find it quite frankly perthetic that this issue still occurs and is simply ignored by Apple. You find this problem over and over, mic doesn't seem to work, but calibration does pick up sound, and there is no clear indication what is wrong, and what could possibly be done about it.
    Like Dragonlover above, I have the same problem, and while looking through various Forums, I see that A LOT of other customers have the same issue. Help on this is virtually been zero from Apple. I now need to use an external mic which is just what I had in mind when I bot the Macbook Air...
    Hope that the next 56 views will not just look and leave but post of they have the same problem, just to show how utterly sad it is that this is clearly a problem not just on the iMac, but on all Macbooks too. Sad Apple...just sad...

Maybe you are looking for

  • New Airport extreme station and Powerbooks. No go

    Got a new AE (802.11n) FW 7.1 and got 4 Macintel computers on it, that works. But then I got 2 Powerbooks that sometimes sees the network but when connected only stay connected for maximum 30 min. And then you cant connect for about one hour. Powerbo

  • Power Mac G5 Refuses to start with new RAM!

    I have a Power Mac G5 Dual 1.8GHz June 2004. I know I read somewhere online that it takes 1GB sticks of RAM, and that it has to be dual channel. I went to Best Buy today and got myself 2 sticks of 1GB DDR PC3200 "Compatible with 400/333/266MHz" Dimms

  • Where to go and what to learn ? Maybe a FastTrack ?

    Hi to all the wise beans and the newbies, I am going through each of the threads one by one looking at tips/common errors et al and really am getting bored as this is not growing me much. (There's just so many times you can ask the same question :-)

  • Fan problem...

    Can anyone tell me why my fan is a little loud on my macbook pro. I have the newest model, and I dont have that much stuff on here at all, I am running with Lion. When I got it 4 months ago I could not hear the fan, but as time goes on the fan gets l

  • Backwards compatibility cs5 to cs2

    I need to supply a sign manufacturer an Illustrator file for version cs2 but I run cs5. I can't find the export to cs2, cs3 etc in the save as or export menu items. We used to have one that could export to older versions (or am I thinking longingly o