MIC in receipt did not match the original message's MIC

Hi
Does anybody has any idea about the error mentioned in the subject line.
We have configured Oracle B2B 10.1.2 for XML messages exchange with TP.
Our trading partner reports saying his AS2 machine shows the above error eventhough host B2B(Oracle) does not show any error.
He explained the cause for the error as-
They are sending messages to oracle B2B, each message carries MIC (Message Integrity Check) with it.
Oracle B2B inturn process this inbound and send MDN back to TP.
As part of MDN, it sends MIC it has received in original inbound from TP.
Now what they complain is the MIC we sent as part of MDN is not the one they have sent to Oracle.
any guesses what might be wrong ?
We use following security setup for host and TP
Digital Envelope SMIME 3.0 with 3DES
Digital Signature SMIME 3.0 with SHA - RSA
One way to confirm this issue is
just check what MIC is there in original inbound from TP
In B2B reports we can not see that, in which B2B table we can find this information ?
Thanks
Praveen

Hi Praveen.
First of all there isn`t original MIC from TP in inbound message. Only TP knows original MIC and compares it to MIC received in MDN to be sure that message was not corrupted during transmission.
As I know, preferred algorithm for calculating MIC is SHA, but MD5 is also supported.
According to your setup settings, your B2B calculates it using SHA algorithm.
Maybe you TP`s software uses different algorithm (MD5)?
If so, there`s no wonder why the resulting "hash" string doesn`t equal to TP`s value.
We also use B2B to communicate with TP using AS2 protocol. And we did have simular problem. We just changed hash algorithm.
Best regards,
Alex

Similar Messages

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

RV120W: The user attempted to connect using a dial-in medium that did not match the restricted dial-in media

I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless. The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?

Dear Customer,
Thank you for reaching the Small Business Support Community.
The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides. If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Online did not match the Cache for employee

I had an employee whom uses cache on his laptop in the office and cleaned out a lot of trash over the past few weeks. Today he came to me and said his mailbox was full but really did not have much in his cache box. So I changed him to online and found that all of the trash was still there.
Is there a setting or maintenance mode I need to make sure is set to keep this from happening again?
Just wondering,
Ken

Hi,
He will need to do a send/receive on the cached GroupWise client to sync everything up with the online version.
If you work off a cached GroupWise client disconnected from the network and delete items, then it won't actually delete items from your online mailbox until you do a send/receive. That's the beauty of a cached mailbox - you can work off the network then simply do a sync when when you have a connection.
The reason is that the trash works a bit funny is that after the initial "prime" it keeps things in sync by shuffling items around and downloading/uploading just the missing emails (efficient use of bandwidth) from the different versions.
When you use a cached mailbox you effectivly run a small PO on the client machine that needs to be synced and it does this by not resyncing the entire mailbox (which could be huge) but rather shuffling items around to sync the cached version with the live PO.
Often this can mean strange thing appearing in the trash but it's worth once you undestand how it works!
It's even more fun if you use two laptops with a cached mailbox on both!
It's possible to have emails deleted from laptop1 then synced with the online mailbox only to find that when you use laptop2 after a week and sync it you find all the emails you deleted from laptop1 (and were removed from online when synced) showing in the trash can for the laptop2 cached mailbox. They were still on laptop2 (downloaded from a previous sync) and it's matched them up by moving them to the trash (most efficient method). You can then just empty the trash from the cached version on laptop2 and things are back in sync.
Hope this helps.

Using Mac Mail.. My signature font does not match the entire message..

Message font size is too big.. Tried both checking and un-checking the "Always match my default message font", had the same problem.. Need help fixing this issue as my emails do not look professional at allllll!!!!

Hi Raj Krish,
For ASP.NET related issue, please post to the following forum:
http://forums.asp.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

But I did not keep the audio message from my friend...

I'm running iOS 8.0.2 on an iPhone 5. I'm loving the audio message feature but I see that my friends are keeping my audio messages or they're saying that I'm keeping theirs. My friends also using iOS 8 confirm that they're definitely not intentionally keeping mine, and I am definitely not keeping theirs. Yes, I have made the appropriate setting configuration for audio messages to expire after 2 minutes.
Anyone know why this is happening? Is it a bug?

yes. You do not need a receipt

CS6 The selected file cannot be linked because its type (audio) does not match the original file's t

I understand there is another posting in this forum with the same error happening on CS5 and their solution had something to do with Quicktime. Mine has nothing to do with this.
I ran into this exact same problem in CS6 and I found that the issue is because I renamed the root project folder. My folder structure is like this:
Drive C:\
-> [root project folder]
-> [folder containing videos]
-> MyProject.prproj
By renaming the root project folder, I was no longer able to open up the project successfully. It would get to certain clips and ask about where the clip was located. Trying to re-link it to the correct file would result in that error (which makes no sense if you think about it).
So my question is, is it intentional that the absolute folder paths are saved into the project file rather than relative paths? Does it not make more sense if paths were saved relative to the root project path? That way the root project folder could be renamed to whatever you want and it would have no effect on the project itself.

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Host name on SSL certificate did not match the alias name in the URL addres

To the XI gurus,
One of our vendors had problem to send us xml invoices because the url address had our server alias name and the SSL certificate we asked them to install had the server name.
To resolve this issue, can we install two certificates (one has the alias name and one has the server name) at our XI server or we can only have one SSL certificate installed at any time?
Thanks!
Fisher Li

Fisher Li,
> we can only have one SSL certificate installed at any time?
To my knowledge we can install only one certificate.
Cheers
Agasthuri

Trying to forward will not forward the original message or attachments

When I click on forward for an email, neither the body of the email or the attachments appear on the forwarded page.

Try going to System Preferences, selecting Network, clicking on your Wi-Fi connection, and then selecting the Advanced button. Then select the TCP/IP tab and select "Renew DCHP Lease". I had this problem a few times in the past and this worked for me.

App store requests old apple ID, but password did not match.

I changed my apple ID a while ago, and just got an ipod touch to "replace" my lost iphone. Using the phone's backup to restore my apps, most of these apps requested for my old apple ID which is fine, considering I had not made any changes to my password before. However, the password/ID was wrong.
I tried using the iForgot and password reset, both of which could not work. Using the question and answer method, it was said that my birthdate did not match the one of my old apple ID, although I did use my real birthdate. The email method was worse, I did not receive any email to any of my email accounts.
Any suggestions on this? Hopefully I don't have to call up for customer service :/
Thanks.

Hi Lloyd,
The only option you have is to get either a Rescue email or get contacted by iTunes Support. You are going to have to reset the passcode on your old AppleID. While you're at it, I would recommend that you make it the same as your password on your new AppleID - makes it pretty seamless....
P.S. - I know that you did nothing to cause this undoubtedly - it seems to happen for some weird reason....but, you're in it now, so have to go through the steps anyway....sorry
Anyway, sorry, I know you have done all of this before, but once more:
If you set up a Rescue email address:
Go into Manage Your AppleID, https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/, select Password and Security, and click the first option (see below), and you will be able to proceed from there..... (I HOPE the first button is showing for you!)
Reset your password
You can change or reset the password for your Apple ID account by providing some information.
Select your authentication method.
Email authentication: To access your information, we will send an email to the rescue email address on file for you.
Answer security questions: To access your information, you will need to answer the security question(s) provided when you originally created your Apple ID.
If you did not set up a Rescue email address:
1. Go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
   Then select 'iTunes Store', and on the next screen select 'Account Management'
   Next choose 'Apple ID Account Security' and fill in that you'd like your security
   questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)
2. Once your questions have been reset, and you set up new ones, also set up a RESCUE EMAIL ADDRESS, so if you forget them again, you won't have to go through all of this.....
Hope this helps!
Cheers,
GB

Verizon ellipsys update did not fix the app memory problem!

The Verizon update for the ellipsys did not fix the original issue with the storage of apps on the device. The update gave you the capability to move apps to your tablet space; but, the device's pre installed apps cannot be moved. Those apps take up roughly 500mb of the allotted 1gb of space.
This tablet was meant for my parents to use and they can't be sitting here umistalling and disabling preinstalled apps just to use there tablet.
Please include in the next update a reallocation of memory for more app storage space. I have already moved all available apps over to the tablet space: I have 4 gigs open on their tablet and only 200mb for apps? Crazy sauce...

I called Verizon 2nd level tech support and they assured me there is NO ED06 update's said they haven't even finished rolling out ED05 yet. I think they just told you that to get you off the phone. I also have a Fascinate and have had problems and can't get them to replace my phone with a different device. I want the Droid Charge since it is the only other one that has the AMOLED screen that I originally chose the Fascinate for . They had a program that ended on July 28th the day that ED05 rolled out. They offered the Droidx, the Incredible 2, and the Droid Charge to replace the Fascinates that were having trouble. I had called to report my issues during this replacement program but was not told that it was going on and now they won't give me the Droid Charge because it has expired. I think since there are STILL issues-they need to bring this program back and allow us to get a different phone. I have been a customer of Verizon for 10 years and have 7 lines so I am REALLY disappointed that they can't work with me (or other customers ) especially since it is not something we did to the phone. It is a problem with either Verizon or Samsung. I don't know where to go from here but maybe if they hear enough from others that didn't have any success with ED05 they will start to replace them. I will probably go to a higher level to voice my concern. Let me know if anyone has any success getting a new device especially the Droid Charge.

Sound and picture did not match?

After recording the presentation it was OK and I could show it. But the fourth time I would show the presentation the sound and animation did not match the pictures? t.i. Keynote did not move to next picture (e.g. I was in picture No. 3 and it shoud move to next picture 4 but it doesn't - and the voice to the next picture No. 4 started continued in picture 3)
Why does this happened? Is Keynote not reliable?

If sound files and images are placed on the slide and timed using Inspector > Builds they will maintain the timing.
I have suggested to do that instead of using the recording feature built in to Keynote which has proven to be unreliable with large numbers of slides and longer voice overs.
Switching to using builds will eliminate these errors.

RPF Camera does not match the scene from 3DS Max or Maya in AE

Hi, since I've been trying to integrate 3D with Motion Graphics, I've had trouble. First I read in VideoCopilot's website that I can import 3D cameras into AE, but when I first tried in AE CS6, right clicking on the RPF sequence layer (with the ZDepth info included), the camera was never imported, and never created a new camera layer.
Then I tried in CS5.5 and from 3DS Max 2013 the camera was succesfully created but it's movement did not match the imported scene, because when creating and positioning some 3D layers, they did not stick correctly to the scene, and they never looked integrated. So it's a pain trying to make them match.
So I also installed Maya 2008 and followed this tutorial (https://vimeo.com/32726702) with a locator for the scene, then saved it as a Maya ASCII, and again when trying to match the camera inside AE with the scene's camera, the movemet of the camera imported was again strange and the 3D layers did not stick correctly to the imported scene. Of course I know I have to position the 3D layers, and I get them to be in the camera sight.
I need some real help because I've tried many times and asked a friend who knows of Maya and 3DS Max, but he could not help me neither inside AE. Again, the importing of the RPF in CS5.5 works fine, but the movement of the camera just doesn't seem to be right what I need.
Thanks for any help.

Cameras in RPF files must be embedded accordingly. Just because it has depth data doesn't mean there's camera data as well. I'm sure there is some simple check box somewhere. The rest sounds like mundane scale and coordinate issues because you do not set up your 3D scenes properly, but that's impossible to tell for certain...
Mylenium

My mother gave me her old Macbook, her old Apple id keeps popping up though. How do I erase it? She did not reset the computer because there are pictures I wanted. Thanks...

Do I need to put the photos I want on an external drive and reset the computer? She is no longer a user.

There's two ways to handle this:
1.) Backup the content you wish to keep from your mother to external hard drive (flash drive as well). Then wipe and start fresh.
2.) If there are programs as well you want to keep and she did not supply the original installation media it'd be easier to get a clean slate by making a new user on the computer and setting yourself as an admin. Whether or not you then go in and remove her old account is up to you.
http://support.apple.com/kb/PH4600

MIC in receipt did not match the original message's MIC

Similar Messages

Maybe you are looking for