Mic is disabled. cant get it to enable anywhere. and now, its stuck making this crackling, whining.

Trying to set up for Google Chat and somehow, turned off MIC ... but the speakers are crackling, kinda whining sound.  WEIRD.  The mic is not responding but then, it didn't respond before!  Running Win 7, 64bit on a HP G-72.  Cannot figure out what to do to a) turn ON mic and b) turn off these speaker sounds that are horrid!  THANKS!

See Here  >  http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work.

Similar Messages

  • I had a disc of pictures in my imac and tried to update the software to 10.9, after realizing the disc was in there i ejected it and now its stuck on the os x page. any info of how to get away from that screen and onto my normal pages?

    i tried to update my software to 10.9 and forgot i had a disc of pictues in the computer. i stopped the istall as it was trying to go onto the disc of pictures. now its stuck on the os x page and i cant get it to my home screen. can anyone help?

    I'm not really sure what you mean by "the os x page". It sounds like the installation did not complete.
    I would try this:
    hold down the power button until the computer shuts down
    take out the disk with the pictures!
    restart and see if it will boot up
    if it boots up normally, I'd probably try to repair your HD: Boot into your recovery partition (hold down ⌘R at restart until you see the Apple symbol), go to Disk Utility, and repair your hard drive. While you're there, repair permissions too. OSX Tips Using the Recovery HD
    Then I'd try to reboot and run the installer again. I think it's a good idea to do the installation in safe mode : Mac OS X: What is Safe Boot, Safe Mode? .
    if it won't boot up normally, I'd try booting from the recovery partition and repairing your HD.
    if it won't boot into the recovery partition, your options are:
    Try to repair your hard drive with internet recovery: OS X: About OS X Recovery
    If you have access to another (working) Mac and a USB thumb drive, download Recovery Disk Assistant, which you can use to repair your hard drive or reinstall OSX: OS X: About Recovery Disk Assistant
    Try to boot into single user mode and repair your hard drive: Repair Your Hard Disk in Single User Mode | Everything Macintosh

  • HT201263 my iphone is stuck in recovery mode, i tired updating the softwear just for my dad to use and now its stuck on connect to itunes when i go to factory restore it just goes back on the same loop saying it cant restore or update

    Trying to set up my old iphone 3g for dad i went to update it and then it said it needed recovering so i did now its saying recover cant be made and everytime i turn it on its stuck on connect to itunes screen bought the phone a while back can someone please help.

    does it give you a error message or just puts you through a loop

  • I had an add on for years but how to get my pc worked on and now its gone..it was a mouse over link to preview that page in a new tab .it had a little blue mark

    it was like a preview any page in new tab when you mouse over the link it would open that page and i cant remember what it was called

    '''[https://addons.mozilla.org/en-US/firefox/addon/coolpreviews/ CoolPreviews]''' {web link}
    Browse faster—Preview links and images without leaving your current page or tab.
    Just mouse over any link and a preview window appears to display the content.

  • HT1212 Hello   my kids Ipad mini is disabled, so I connected to the computer and now its asking for the passcode, which is not know.  How do i set a new passcode?

    Forgetten Passcode for Ipad mini,  How do I reset the passcode?
    Thx

    You can't just reset the passcode.  You'll have to restore the device.
    Follow the directions in this link:
    http://support.apple.com/kb/ht1212
    If that doesn't work, you need to use recovery mode:
    http://support.apple.com/kb/ht1808
    Next time write the passcode somewhere safe for future reference.

  • I tired to resatrt my ipad and now its on a screen with usb cord connectinng to itunes how do i get it off of there without restoring my ipad?

    How can i get my ipad out of recovery mode without having to restore my ipad to factory settings. I was trying to restart my ipad so i held in the home and power buttons at the same time and now its stuck in recovery mode

    How can i get my ipad out of recovery mode without having to restore my ipad to factory settings.
    You need to restore the device.
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you are concerned about losing your iTunes purchases, you can re download without being charged again.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I cant get my camera to work it says its on but has no feedback, any ideas?

    i cant get my camera to work it says its on but has no feedback, any ideas?

    Here are my best suggestions for your camera problem:
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (the "reset" suggested there
       often restores normal function,) continue with the following.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update for your Mac OS.
       If you are using OS X 10.7 or later, reinstall OS X.
    • Repair permissions again immediately following the system restart
       that completes the Combo update or reinstall.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.  For hardware help, contact Apple or an Apple-Authorized Service Provider for service.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
       Unless you have a current backup, make one now.
      Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."

  • HT5654 hi i cant get into my i tunes  and up date my phone it wont turn on its saying i need i need to conect to i tunes

    hi i cant get into my i tunes and up date my phone

    Help Tahlia wrote:
    It's not working at all ...
    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062

  • HT1473 I imported songs onto itunes AND my ipad but i cant get it on my ipad and that is where i really want them. how do i find and get them on my Ipad? i tried the support area but that didnt help at all.

    I imported songs onto itunes AND my ipad but i cant get it on my ipad and that is where i really want them. how do i find and get them on my Ipad? i tried the support area but that didnt help at all.

    Did you purchase them on your iPad with the same Apple ID that you are using for iTunes on your iPhone and that iTunes on your Mac is sign into?

  • I've just enabled match and now my new purchases do not show up on my i tunes account. i can only play them buy going in to purchased playlist.

    I've just enabled match and now my new purchases do not show up on my account. I can only access them buy going into purchase playlist?

    SADLY  not as i downloaded an upgrad to my original PAGES/
    i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
    but what a waste of time as it doesn not save any changes done automatically back in the cloud....
    i am now downloading the new LION and hope that it will fix the problem
    i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
    and the same magic was supposed to happen in reverse.
    It doesn't/
    if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
    I hope the new lion will help resolve the isssue/
    any other ideas> keep em coming...thank you so much.

  • I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

    I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

    Greetings cdewinkel,
    It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Make sure that your device is on
    Also make sure that you can get to the Home screen.
    Get help if you have one of these issues:
    Your iOS device won't respond or turn on.
    Your iPod won't turn on.
    You forgot your passcode or your device is disabled.
    Make sure that your Mac supports your device
    See the system requirements for iPhone, iPad, or iPod.Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable. 
    Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
    You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust. 
    Learn more about the Trust This Computer alert.Restart your device
    Restart your iOS device or reset your iPod.Restart your Mac
    Turn your Mac off and back on.Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software. 
    Get more help
    If you still don't see your device in iTunes, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • I tried to update my iphone4 to enable iO5 and now my phone just shows itunes plugin picture??

    I tried to update my iphone4 to enable iO5 and now my phone just shows itunes plugin picture??

    Connect it to the charger and let it charge for a while. Then try again. Never upgrade your phone without first connecting the charger. Don't let the battery go dead or the entire device could become disabled.

  • HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

    I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

    Click here and follow the instructions.
    (98724)

  • Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot

    Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
    All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?

    Hi
    To run Mouitain Lion you need to update Logic.
    For the updaters to work the Logic application must be:
    a) Within the Applications folder, and not in any sub-folder
    b) Named "Logic Pro" with no extra numbers or spaces
    CCT

  • I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen?

    I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • TIME MACHINE EXTERNAL DRIVE BACKUP DISK CANNOT BE MOUNTED

    Hello, Last week i brought a WD MY BOOK LIVE NETWORK DRIVE. I hv 2 Windows PC and 1 MACBOOK. All data residing on these 3 computers i intend to back up. One Windows PC i was able to successfully connect, 2nd Windows PC not yet connected. Macbook conn

  • CTS+ configuration in PI 7.4 to transport SLD specific data

    Hello Guys, I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System. I have created a CTS user in Solman System and in PI NWA I have defined destina

  • Credit against advance payment

    Hi friends, I have an situation where the customer's are to be delivered / order created only if the advance payment is received from the customer. There are some set of customers who have a set credit limit upto which they can procure from the compa

  • Migrating to new Skype id + importing 1200+ contac...

    Hello, I am new here to the forums however a long time Skype user. I recently ran into an issue which at first I thought would have been a minor infraction (mainly from my misinterpretation of bulk contact requests) but now has snowballed into a big

  • Loading a View Controller based on UITableViewController cell

    Hi, I've been trying to make my TableViewController cells load different UIViewControllers when they are clicked, but haven't been having any luck. All that happens is my program starts but then when I click on the cells, the view freezes. This is my