MIC not verified # authentication-failed

Hi,
We are getting this error while trying to send messages from XI through AS2:
MIC not verified # authentication-failed
Can anybody please let us know the reason for this error.
Thanks in advance.
Best Regards,
Shweta

Hi Shabarish & Prateek,
Thanks a lot for the information.
I've also checked this information in Seeburger document and I agree this can be an issue with the Certificate.
But these scenarios were working fine for a long time,the Certificates are valid till 2016.
And the most important thing is,we get this error in 1 message out of 100-200,other messages are sent successfully.
So,if this is an issue with certificate,how is it possible that it affects only 1-2 messages not all.
I had never seen this error before and suddenly we have started getting such errors for a number of scenarios for last 15 days.
I believe ,there can be a problem with Certificate for 1 customer but if it is more than one ,it is hard to believe that all of them have problems with Certificates and at the same time.
I tried to search for notes related to this problem.
Is it something related to MIME content,as mentioned in note 1287778?
Kindly let me know.
Thanks.
Regards,
Shweta

Similar Messages

  • AS2 Receiver Error: MIC not verified # unexpected-processing-error

    When sending out a test message using Seeburger AS2 receiver channel I get the following error:
    MIC not verified # unexpected-processing-error
    So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
    Do you have any idea on this?

    Hi ,
    I have been facing this error and tried all the refresh and reimporting of certificate.
    "MIC not verified # unexpected-processing-error"
    could you be bit specific how to fix this ?
    thanks in advance
    Praveen

  • SSO not authorized: Authentication failed.

    Dear Experts,
    I made a homogeneous system copy of my BI 70 prod to quality. I followed the steps according to the docs. After the system copy I did applying new licenses( ABAP, Portal, J2ee) , deleting old portal abap certficates, creating them on both portal & abap, exchage the certificates. All done as per the docs
    Now the ABAP engine is trusting the portal. I mean I am able to login into portal.
    But Portal is not trusting the ABAP, I have issues with BEx tools.
    I did many times delete certficates, exchange them manually and using template installer.
    I also followed the Notes
    917950 - SAP NetWeaver 2004s: Setting Up BEx Web
    888687 - BEx Web Java: Analysis of communication/logon problems
    No use, Now I coming back to square one.
    Has anyone has special thoughts on this issue?
    Thanks for your time and help.
    MB

    I did many times delete certficates, exchange them manually and using template installer.
    I also followed the Notes
    917950 - SAP NetWeaver 2004s: Setting Up BEx Web
    888687 - BEx Web Java: Analysis of communication/logon problems
    support desktool as per
    note 937697
    SE38 ( RSPOR_SETUP ).... etc
    All are failing at one point.
    ================================================
    Status 12: Maintain User Assignment in Portal           System failure during call of function module RSWR_RFC_SERVICE_TEST
    This is the error message we are getting on the Java cluster log
    #1.#000255334607006B00000026003D500800044709864436FE#1204006139737#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.handleRequest#J2EE_GUEST#0####522996e0e43111dc9cb8000255334607#SAPEngine_Application_Thread[impl:3]_27##0#0#Error##Plain###java.lang.RuntimeException:
    call FM RSWR_PREEXECUTION_PROXY to ProgId BIQ_PORTAL_BIQ on host
    afgprd01 with SSO not authorized: Authentication failed.
    ===============================================
    No use, No use ....Now I coming back to square one.
    Has anyone has special thoughts on this issue?
    Thanks for your time and help.
    MB

  • Call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY , SSO Authentication fail

    Dear all:
    We have finished EP &BW configuration and also check setting with Diagnosis tool. The lights are all green. But when we tried to publish query to EP, after chosing PCD folder the query would go , an JAVA error message shown up :
    Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId <J2EE Program> on host <EP host name> with SSO not authorized: Authentication fail.
    We tried a lot of means, even issued OSS message... Still no good found
    HELP !!!
    BRs
    SZU

    Please check if the integration and sso configuration did correctly
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
    Hope it Helps
    Chetan
    @CP..

  • OBIA 7.9.5 EBS Integration Not Logged On nQSError 43001 Authentication Fail

    Hi,
    I'm attempting to get Oracle Business Intelligence Applications 7.9.5 / OBIEE 10.1.3.3.2 integrated into the eBusiness Suite 11.5.10.2 per Metalink Note 552735.1. At the moment not an action link, just menu option to SA Administrator.
    I've run into and worked around a number of problems with the Initialization block variables setup in OracleBIAnalyticsApps.rpd and now no longer get errors in the NQServer.log after disabling Initialization Blocks for Siebel/Peoplesoft and disabling 2 EBS specific Init blocks that were erroring; 'Inventory Organizations' and 'Ledgers' I'll fix those later.
    However, now I get an error in the sawlog0.log file as follows:
    File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
    Properties: ConnId-6,6;ThreadID-1145072560
    Location:
    saw.odbc.connection.open
    saw.connectionPool.getConnection
    saw.threadPool
    saw.threads
    Odbc driver returned an error (SQLDriverConnectW).
    State: 08004. Code: 10018. NQODBC [SQL_STATE: 08004|http://forums.oracle.com/forums/] [nQSError: 10018|http://forums.oracle.com/forums/] Access for the requested connection is refused.
    [nQSError: 43001|http://forums.oracle.com/forums/] Authentication failed for in repository Star: invalid user/password. (08004)
    Type: Error
    Severity: 42
    Time: Wed Dec 3 07:13:16 2008
    File: project/webconnect/connection.cpp Line: 276
    Properties: ThreadID-1145072560
    Location:
    saw.connectionPool.getConnection
    saw.threadPool
    saw.threads
    Authentication Failure.
    Odbc driver returned an error (SQLDriverConnectW).
    Can anyone point me in the right direction here?
    Thanks,
    Gareth

    The strange thing is both Gareth and I have configured OBIA/OBIEE on a Linux server and local authentication works fine. Once we enable external EBS authentication, we get the error listed above.
    Does anyone who has done the OBIA EBS integration with OBIEE running on Linux have an example of the odbc.ini file. It appears that even though we have reconfigured OracleBIAnalyticsApps.rpd to use OCI everywhere, that there is still some hard coded ODBC references for external authentication.
    We are configuring instanceconfig.xml as directed:
    Integrating Oracle Business Intelligence Applications with Oracle E-Business Suite
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=552735.1
    Configuring InstanceConfig.xml for External Authentication
    1. Modify the instanceconfig.xml file for the Oracle BI Presentation Services as shown below:
    <?xml version="1.0"?>
    <WebConfig>
    <ServerInstance>
    <CatalogPath>c:\temp\default</CatalogPath>
    <DSN>AnalyticsWeb</DSN>
    <Auth>
    <ExternalLogon enabled="true">
    <ParamList>
    <Param name="NQ_SESSION.ICX_SESSION_COOKIE"
    source="cookie"
    nameInSource="EBSAppsDatabaseSID"/>
    <Param name="NQ_SESSION.ACF"
    source="url"
    nameInSource="ACF"/>
    </ParamList>
    </ExternalLogon>
    </Auth>
    <!-- Other settings here. -->
    </ServerInstance>
    </WebConfig>
    2. The nameInSource for the cookie should be the same as the Oracle E-Business Suite application database SID name. To verify the name of the cookie, using Firefox, check the name of the cookie created under the us.oracle.com domain (or the domain where your Oracle E-Business Suite Application server is running). Please note that the cookie name is case sensitive.

  • TS4002 Can you tell me if the smtp settings have changed recently?  I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working.  Error message is: Authentication failed because Outlook doesn't support any of the

    I am able to receive messages on my IMac using Outlook but am unable to send.  I've had no trouble in the past but began receiving the following messages today.
    5.7.8 Bad username or password (Authentication failed).
    Authentication failed because Outlook doesn't support any of the available authentication methods.
    I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues.  Any advice?

    Here are the correct settings. They have never changed since iCloud debuted a year ago.
    Server information
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud. 

  • Authentication failed, ADFFacesContext had not been properly released

    hi,
    I setup Login page through ADF security wizard in jdev 10.1.3.2 and set error page to be the same Login page. The rest of login process is same as in SRDemo: index page redirects to Welcome page, user press Start button etc.
    But if the user enters wrong credentials and after he is presented with Login page again (wirh message Invalid username and password) this time enters correct credentials he is dispatched to Welcome page but connectedUser from userInfo bean is not shown on the page. I noticed this warning about ADFFacesContext not properly released on earlier request. How can I properly release this context after user enters wrong credentials?
    SEVERE:           [RealmLoginModule] authentication failed
    Jul 24, 2007 1:26:34 PM oracle.adfinternal.view.faces.application.ViewHandlerImpl _checkTimestamp
    INFO: ADF Faces is running with time-stamp checking enabled. This should not be used in a production environment. See the oracle.adf.view.faces.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
    Jul 24, 2007 1:26:35 PM oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl startFilter
    WARNING: AdfFacesContext had not been properly released on earlier request.

    Hi,
    this seems to be a bug in ADF Security. However it should work if you set the authentication as in SRDemo, in that the first page requires authentication (protecting the root / virtual path).
    ADF Security in 10.1.3.2 does allow users to work with anonymous accounts to achieve public pages (to defer authentication). So if public pages are not needed then the work around mentioned above should work
    I'll try and reproduce the defect you see in JDev 10.1.3.3 and file a bug if it reprduces
    Frank

  • Cannot access my email, Sending of password did not succeed. Authentication failed.

    Was able to use my Thunderbird Mozilla email on both computers and then suddenly on both I rc'd msg that, "Sending of password did not succeed. Mail server incoming Verizon.net responded Authentication Failed".
    On the computer that I use all the time, I played around with it and all of a sudden it was "fixed". No idea what I did.
    Today I turned on the other computer that is only used by the Grandkids for games, etc., and received the same msg and decided it was time to fix but am not able to figure out how.

    Best starting point is to remove all stored passwords for the affected accounts.
    [http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Options]|Security|Passwords→Saved Passwords.
    Use the filter at the top to locate all entries relating to the affected account.

  • User Authentication Failed via http BUT not with Visual Administrator !!?

    OS : Win 2k3 Server UK * DB : SQL Server 2005
    SAP Netweaver 2004s Application Java
    Hi All,
    Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
    Using the user ‘Administrator’, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
    At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
    Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
         security.3.log
         <i>#1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest     | LOGIN.ERROR     | null     |      | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#</i>
         server.0.log
         <i>#1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#</i>
    &#61664; I tried to connect http://host:port/sld same problem User Authentication Failed
    <b>Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?</b>
    Thanks in advance
    Yves

    Hi,
    I found the solution this last week-end.
    This behavior let's thinking to a problem of authentication.
    But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
    Cheers
    Yves

  • EAS Web 11.1.2.1:  Failed: -1 Your session is not currently authenticated

    I have 1 user that cannot access EAS Console on the web. All other users can log on with no problem. She gets the following error when logging on from her laptop: "Session timeout. Failed: -1 Your session is not currently authenticated. Please log in." She is able to log on from my laptop. The browser version and Internet Options on her laptop and mine are identical. The only difference that I can find is that this user has installed JRE 7 while I am still on 6. I just got notice from Oracle Applications Users Group that JRE 7 is incompatible with Oracle e-Business Suite, but no mention is made of Hyperion applications. Is JRE 7 compatible with EAS 11.1.2.1? If so, what else could cause this issue?

    iam sure its java ..
    no need to uninstall 7 if u ahve installed already
    check ur control panal > java > view> even if u have installed 1.6 or 1.7 should be problem you can select 1.6 and still can use 1.7 for other application
    but i have doubt if that problem try access EAS web .. if you have Java loading pop windows and it stops without showing EAS console then it might be Java but if your able to see EAS console i guess its not java ..i dint remember what was workaround i did .

  • The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site

    I am trying to load any 9.0.3 firmware on my UCM 5.0.4.2000-1 server. Every newer firmware I load throws the following error. I have verified the MD5 is correct and also downloaded the file several times with the same result. I can load the same firmware file on another UCM server and it loads fine. Any ideas?
    Thanks in advance!
    Error Message:
    The selected signed file could not be authenticated. The file might have been  tampered with or an error might have occured during download. Please verify the  MD5 hash value against the Cisco Systems web site:  9b:b6:31:09:18:15:e7:c0:97:9f:e6:fe:9a:19:94:99
    Firmware File: cmterm-7970_7971-sccp.9-0-3.cop.sgn
    UCM version: 5.0.4.2000-1

    Thanks for your reply. We have a lab environment where I maintain  UCM 5.0, 5.1, 6.0, 6.1, 7.0, 7.1 and 8.0 servers each running the latest released firmware for our QA testing team. I have downloaded and installed the latest device packages but find that if I try to install any firmware newer then 8.3.1 on either 5.0.4 or 6.0 i start getting MD5 hash authentication errors. It looks like 9.0.3 firmware should work on UCM 5.0 and 6.0 so I am lost as to why I can't seem to update any firmware for any model phone if it is newer then version 8.3.1 on either 5.0 or 6.0. while 5.1 and 6.1 work without issues. Maybe it is just a bug. I mostly wanted to see if anyone else has experienced this or if it is just me.

  • TS1424 ı bought the newsweek subscription and couldnt verify the mail so now when ı try to login my account it says authentication failed. ı took the bill so what will ı do now?

    ı bought the newsweek magazine  subscription and couldnt verify the mail so now when ı try to sign in my account it says authentication failed. ı took the bill so what will ı do now? How will I enter and download my magazine. thanks

    ı bought the newsweek magazine  subscription and couldnt verify the mail so now when ı try to sign in my account it says authentication failed. ı took the bill so what will ı do now? How will I enter and download my magazine. thanks

  • Verify volume failed with error Could not unmount disk!!

    Im having weird things with my fw lacie 200gb. I come across these weird white cubes which pop up in the search mode in finder. So i tried to repair permissions of the Lacie disc and i get this sign
    Verify volume failed with error Could not unmount disk
    What is this?
    What are those white cubes in the finder?

    Hi gizeh12!
    Are you able to verify the volume of the disc (not permissions)? It could possibly be some bad/corrupt sectors on the drive. Is it a white box with a dashed line outline? Does the file size show the accurate value in "Get Info" when you click on the file?
    Are those files somewhere else as well?

  • I keep getting a notification that says "Google Talk authentication failed"...does anyone know how to get rid of this?  I tried looking for it in the apps but not really sure what google talk is or how to get rid of this message that keeps popping up.

    How do i get rid of the message that keeps popping up that says "google talk authentication failed"????

    funwidowlady,
    Good afternoon!  I'm glad I can be here to help with this error. In the device this application is identified only as 'Talk', so that be more familiar to you. First I recommend opening the 'Market' app on your phone, then Menu>My Apps to see if this application requires an update. It will display a list on top of all applications that need to be updated. If nothing exists, tap 'Home' and go into 'Settings>Applications>Manage Applications>Talk, then tap 'Clear Cache' and 'Clear Data' to remove the history of that application and stop the notifications.  The app will remain on your phone for future use, if you desire to take advantage of it. Read more about Google Talk here
    Thank you!
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • Site Recovery Manager (SRM) v6.0 fails to pair sites - certificate chain not verified

    I have used the default self-signed certificates throughout the vCenter and SRM setup.  When going to pair the vCenters, I get "Server certificate chain not verified".  These are 2 new VCSA 6.0 VMs (embedded PSCs for each) and 2 new Windows 2012 R2 servers to run SRM 6.0.  I can view the Site in each respective vCenter but can't pair them.  Does anyone have suggestions?  We have tried valid SSL certs before on our original 6.0 deployment and continuously run into these certificate chain not valid errors.

    Yes, I always used the FQDN.  This issue was actually the result of having an incorrect vCenter topology.  The error resulted in us spending hours with support all around valid or self-signed certs.  In the end, I had to completely redeploy new VCSA 6.0 appliances and follow the 3rd recommend topology.
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2108548
    With this setup, it also links the vCenters and it seems to be much quicker than Linked Mode in previous versions.  I was able to pair the sites in SRM without issue.  FYI, I am using self-signed certs all around at the moment.  SRM is very finicky about trust with SSL certs so I won't try implementing valid SSL certs until I get some working failovers.

Maybe you are looking for