Mic on earphone plays back audio from laptop. How to fix?

I've tried multiple earphones with mic and they all playback sounds playing from the laptop. I've even tried lowering the sound playing to the side of the earphone that has the mic all the way down and the audio still plays back into the mic. Is there a way to fix this? Seems to be an issue with the jack.

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? Help!!

Similar Messages

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

Hello @GiveHP2ndChance,
I understand that you are not able to get adequate sound from your notebook computer's BEATS Audio, and I would be happy to assist you in this matter!
To correct the sound on your system, I recommend following this document on No Sound from Speakers (Windows 7) or for (Windows 8). This should help improve the quality of the audio on your notebook.
To assist you further, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If the same lack of quality is present when headphones are plugged in.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I have just added new CD (Rod Stewart Unplugged) to iTunes. It sounds awful - crackly and distorted - when played back thorugh my laptop and on iPod Classic. The CD sounds great on my CD player. (Other CD record fine onto iTunes). How can i fix this?

i have just added a new Cd to iTunes on my laptop and then transferred to iPod classic (CD: Rod Stewart Unplugged). When playing back on the laptop or iPod the recording sounds awful - very crackly. On the Cd player it sounds fine. What is the problem and how can it be fixed? (Otherr CDs record fine onto iTunes)

Hi there,
I would recommend taking a loook at the troublehooting found in the article below.
iTunes 11 for Windows: Import songs from CDs
http://support.apple.com/kb/PH12486
-Griff W.

HT2375 Hi I can't play back track from the middle of a software track

Hi I can't play back track from the middle of a software track, and hear what I have played.

MarsDaretoDream wrote:
Hi I can't play back track from the middle of a software track, and hear what I have played.
For this you need to look at chase functions. Project settings>Midi>Chase button

Droid Razr Bug. Won't play streaming audio from websites.

My Droid Razr won't play streamed audio from a website and won't play .wav files attached to e-mails. That's annoying.
Motorola tech support said problem will be fixed upon next upgrade of Android OS.
My phone is currently running Android OS 2.3.5.
Does anyone now of a quicker fix?
Does anyone know when an OS upgrade will be available for the Droid Razr?
Thx!

i got the same issue on my ipod. i figured the whole idea of converting the format would solve the issue. never really found out how to solve it. i'll be watching this post to see if anyone has a solve for this issue.

Logic wont play back audio regions under certain tracks.

Hello! I am rearranging my audio files (throwing them all to my secondary hard drive, where I record to ). I did this, and now certain audio files to do not play back in my logic projects, but there is no warning that says the file cannot be found--which is what I am used to happening. At that point I would either hit the Search button, or the Manually Find button. Instead, the region appears as per usual, just with nothing playing back. I know I could import the audio back into my projects manually--which would be fine for those that start at a specific, clean-cut time, but what about all those spliced and diced regions that are cut up and laid out all over the place!?
I discovered new details to the weirdness . . .
It seems, in the few projects that I relocated audio, that the affected regions cannot be played back unless I move them to another audio track. What??? For example, the vocal track in one song, which is all set up with its plugins and such as Audio Track 2, will produce no sound unless I drag it to another audio track, say Audio Track 3 or 4. It is bonkers!! What the heck is that about?
This is what happened in all of the projects affected by my source audio rearrangement. Sure, I could easily just copy my channel strip settings to a new track, relocate my audio region to it, and hope all goes well thereforth, but I would much rather get to the root of this oddity so it doesn't somehow buck me later.
What do you think it could be?
Oh yea, in one of the projects, all the other audio tracks seem to play back fine, except for the recorded bass track. Okay, so just to check, I drag the bass audio to another track--yep, it does play back. But I realized that the track that held the bass region (Track 4) is actually playing back the vocals (which are also playing back normally in their intended track). I initially didn't notice the extra vocals underneath my normal vocals track, with their low-key bass plug-in settings. Funny thing is, there isn't even a region on Track 4 any more! How is it playing anything back at all?? Not that it makes any more sense that it would be playing back vocals with a bass region.
Also, the fact that Logic Pro keeps quitting unexpectedly does not inspire much confidence. This has just been lately, and I've only been playing with these projects lately, trying to figure this out.
Is my Logic haunted? =(
I welcome any and all objective suggestions! I am feeling just the slightest bit overwhelmed by this odd behavior.
Thanks!
(i checked, but did not see that the tracks were muted in anyway, including the region itself)

I figured something out that might tell someone what I did to screw things up!
I think I did something to mess up the environment or something. I know this much now: When I created a new project, I created 6 new audio tracks. I noticed that a piece of previously recorded audio that I imported into the project would only play back on ever other track! I than noticed that on the every other track (that would not play back the audio when it was dragged to it), there was neither a single circle (indicating mono for the track) or the two overlapping circles (indicating stereo for the track) beneath the channel's level meter.
There must be some significance to this that I do not quite understand!
I then went back and launched several of my problematic projects to see if the tracks that would not play back audio also did not display either the mono or stereo circles on their respective channel strips. They did not! What kind of global setting did I change that would cause this?
There was one project that had one track that bared neither mono or stereo an played back its audio (Although, in this same project, there was another track that bared neither symbol that was not playing back its audio). Anyway, I noticed something that was weird to me, but will likely tell someone what the heck I must have inadvertently done to cause all of this:
When I change one audio track (that bares the mono symbol) into stereo, the next audio track (that didn't display either symbol) seems like it is combined with the previous track's output!
Very strange! Did I somehow set some global preference to split up my audio tracks across each not audio track?? If so, could someone please explain to me what and I did that? Thanks!

The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music back into my laptop , how can I do that. Pl help

The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music etc back into my laptop , how can I do that. Also let me know how I can transfer the contacts into Windows contacts from I phone. Pl help

Your content will only be where you put it. It has always been very basic to always maintain a backup copy of your computer.
You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
You can import your pics taken with the iphone as you would with any digital camera.
You can e-mail the other pics to yourself, they will never be of the original quality.
You can out a unique contact and calendar entry on the computer. You should get the option to merge the data when you sync.

I have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?

i have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?

what error?

I have the apple tv but it say invalide format on my tv but then wen i do the hared rest u see the apple logo but then it go back to invalide format how to fix that problem

i have the apple tv but it say invalide format on my tv but then wen i do the hared rest u see the apple logo but then it go back to invalide format how to fix that problem

Hi richardwilliams51,
If you are having difficulty connecting to the Internet using your Apple TV, I would suggest troubleshooting using the steps in this article -
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
If that does not completely fix your Apple TV, you may need to restore it, using this article -
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Thanks for using Apple Support Communities.
Best,
Brett L

Is anyone else having sensory issues since updating to the IOS 7.1.1? My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

DVD Studio Pro not playing back audio of asset converted from FCP via compressor.

I exported project via compressor:
File Extension: m2v
Estimated file size: 4.34 GB
Video Encoder
    Format: M2V
    Width: 720
    Height: 480
    Pixel aspect ratio: NTSC CCIR 601/DV
    Crop: None
    Frame rate: 29.97
    Frame Controls: Off
    Aspect ratio: 4:3
    Field dominance: Bottom first
    Average data rate: 3.6 (Mbps)
    2 Pass VBR enabled
        Maximum data rate: 7.5 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 15, Structure: IBBP
    DVD Studio Pro meta-data enabled
This took about 7.5 hours. I exported the audio separately as AC3. Finder plays it sound & pictures. Quicktime plays the video. DVD Studio Pro, when I drag the assets (video, audio) to the timeline editor, so I can play it in the viewer, it plays the audio the video is black. No setting in view or any other setting will get it to play the video. This project is due to ship today and I don't want to re import it if I don't have to.
I exported this project before the MPEG2 export as a Qicktime with .mov suffix. This plays alright, but there is artifacting around motion. I think this is due to low VBR, but don't know. Can ayone help?
Dix Moser
[email protected]
FCP Studio
PowerMac 1.8G 3G mem 250G HD
750 G ext. Firewire drive (where media is stored)

If I may chime in...
I'm a little confused on the "what plays what" part, but all that really matters is what DVDSP sees/plays.
I've worked on a system like yours and what I'd recommend is:
1. NEVER export via Compressor. It's just ungodly slow on anything less than a Quad. Export a self contained QuickTime Movie using the first export option and use that to feed Compressor.
2. Segment your output into manageable clips (I like 15-20 minutes) both to perfect the encoding and so you aren't re-encoding the whole show if something goes sour. It will all play fine as long as it's all in the same DVDSP timeline.
From what you describe, I'm thinking you're on an early version of Compressor that had A-Pack as the AC-3 encoder. This is no biggie, I mention it mostly to verify. Early Compressor was good too.
Make maybe a 5 minute piece to tune up. Just export as normal, then into Compressor. Your encoding values seem about right. Get the AV pair into DVDSP and it should play. I'm guessing that part of your problem is that the processor is fighting to handle the project size. Build the test clip project and look at it in DVD Player to view what would have been burned. If all looks OK, go for it. If not, bring back the results for discussion. This should be a snap, it's just a really big project. Keep your head up, I had a friend do a 225-minute disk on his G5...

NO audio from laptop speaker when phone connected to Bluetooth with media audio checked

Hey guys, when I connect my Verizon Samsung Galaxy SIII (SGS3) phone through my Toshiba Qosmio x875-Q7280 Windows 7 X64 Bluetooth with media audio checked on my SGS3; for what ever reason there is no audio playing through the speaker when I try to listen to my music and for what ever reason I notice in the recoding tab under Sound my SGS3 profile mic audio bar was moving up and down. When I went in to configure it, I click a check box which played the music that I was playing through the laptop speaker but it sounded all muffled. If anyone can help would very much appreciate it.
Solved!
Go to Solution.

Just wanted to update just incase someone else is have this same problem also, so I manage to solve this on my own my installing a bluetooth driver from Intel. I'm not sure if link posting is allow, so I'll just direct you there. If you google Intel and navigate to their download center, search for Intel® PROSet/Wireless Bluetooth Software for Windows 7* it should have two choice 32 bit and 64 bit. After it finish installing there should be another bluetooth icon in your bottom right tray. Next right click the bluetooth icon and add a new device as you would any other and enable media audio from your connected device (in this case it would be my Samsung Galaxy S 3) and you should be good to go with music or what ever sound coming out through the laptop speaker.

Recording audio from laptop with T420s and combo port

Hi All,
I sometimes need to run my companys application and record the spoken messages for demo's etc. Previously, I did this simply by playing the messages through the laptop speakers and at the same time using the Windows Sound Recorder to record it from the laptop microphone (I didn't even need to use external speakers or microphone).
Now, with the new T420s that I have, when I speak into the laptop microphone it records my voice fine but when I use an application to play messages through the laptop speakers, the recorder does not pick up an sounds......is this a result of this "combo" port........if so, is there any way round it ?

I meant what if you recorded just your voice, then added the audio from your demo after the fact?
The sound chip takes the microphone input, and subtracts the speakers sound. This is what is needed most of the time, but in your case, it seems to be the exact opposite. Not sure if this can be disabled in SmartAudio.
You'll probably need Virtual Audio Cable to record multiple streams.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Garage Band Not Playing Back Audio

Hi folks,
I've had an issue with GarageBand pop up. I've checked around, but have found no solution to this.
I've been working for the last two days on a song, opening and closing the app a fair bit depending on what's going on. About an hour ago, I decided to hit the option to play the track through the finder to save me opening if I want to listen over it.
After doing that and opening the app again since, audio is only playing back from two of the tracks. The sound level bars are moving in the rest, but nothing else is happening. I've checked the sound levels and all, but nothing is changing.
Has anyone else encountered this? Please tell me it's recoverable!
Many thanks.
Message was edited by: Malakym

You, my friend, are a savior. Thank you!
Not sure why that would have caused the issue as I've never hit that before, but hey, doesn't matter now.
Thanks!

Imovie not playing back video from one event

Select vidoes in iMovie '09 won't play back for me. All I get is a black box, no audio, no video. The issue appears to be confined to videos from one particular event. The preview shows up just fine, but no actual video.
The videos were taken and imported from the same Sony camera as the videos that do work. They also play back fine in Quicktime. The format is .mov. Any ideas?

Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it. (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
How to get movies to start playing back again in iMovie '09:
1.) Close iMovie.
2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
- There are were two files "Cache.mov" and "Cache.plist", I deleted both.
3.) Restart iMovie
This appeared to force the program to generate new files and start working correctly. From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
@ Bengt Wärleby
I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future. I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue. Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov).

Mic on earphone plays back audio from laptop. How to fix?

Similar Messages

Maybe you are looking for