Mic Plug And HeadPhone Jack In Tower Not Work

I just installed the Sound Blaster Audigy 2 Card in my Sony Vaio Computer that runs on XP. The serial number for the sound card is M8B04004650275U .
Everything is working except the front Tower Plus for the Mic and The Headphones. What do I need to do to get this working? Is there a setting or do I need to run a cable from the SoundBlaster Card to the card on the front of my tower?
Thanks

If that doesn't work then contact your local Xperia Care
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

I need to have audio out from HDMI and headphone jack simultaneously

I need to have audio out from HDMI and headphone jack simultaneously.
I seem to be able to select one or the other, but not both ? !
Thanks

No. You can only use one sound output:
Why can't I select HDMI audio on my Mac mini?
If you connect an HDMI display or television to a Mac mini (Mid 2010 or later), you might not be able to select the HDMI audio device (in System Preferences > Sound > Output). This can happen if you also have headphones plugged in to the computer. Unplug the headphones to be able to select HDMI audio.
Mac computers: Frequently asked questions about using HDMI

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

DvForge mic plug and guitar plug

I just bought both the mic plug and guitar plug USB devices from DVForge. Their website made them sound pretty handy (close to no latency, better than CD quality recording), and I read no bad reviews.
Trouble is...they don't work. The mic plug gives me very quiet recording with hiss and horrible peaks. And the guitar plug gives me almost nothing at all.
Have I bought a pair of lemons? Or is something set up wrong? I'm using a sony F-VX650A mic, and a bog-standard semi-acoustic guitar. I notice that the mac recognises the device as "C-Media USB Headphone set" - whatever the **** that is.
Any ideas?

I'm a turkey. Just the input levels in system preferences. They work fine. Duh.
Incidently, the ** in "whatever the **" was subbed in for, wait for it, H..E..double hockey sticks. I apologize to the moderators for this uncharacteristically offensive turn of phrase. I shall adjust my language accordingly.

TS3694 I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at al

I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I buy my Headphones on Apple Store, and the left sight is not working that much.II want to know if i can replace to a new one.

I buy my Headphones on Apple Store and it cost me about $36 with Tax, and the left sight is not working that much.I want to know if i can replace to a new one without no charge.

If they are Apple-brand headphones, then the Apple Store will handle the warrranty and, absent any evidence of abuse, should replace the headphones. If the headphones were made by some other company, then unless you purchased the headphones in the last fourteen days, you will have to contact the manufacturer of the headphones for warranty support.
Regards.

I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

If you've tried everything mentioned you probably have a failed earpiece. One option is to get a BlueTooth headset and use it for all calls. It will be cheaper than the $199 out-of-warranty replacement price from Apple (if it's still in warranty or AppleCare it will be free). Good BT headsets can be had for around $40. And it will hold you over until the Next New Thing from Apple is available

Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

Enter the device manager and verify that the webcam is present and has a driver installed.
1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Headphone + 7.1 together not working in Windows 7

Headphone + 7.1 together not working in Windows 7?Dear All
I am having ?audigy 2 ZS platinum and no issues in windows xp recently i tried installing windows 7 so i downloaded the driver from the website.
my problem is in windows 7 im not able to use the both headphone and 7.1 speaker together but in windows xp it works fine and no issues when ever i want to use the headphone just turn off the volume controller it was very & convenient for me.in windows 7 if i set the speaker mode in 5.1 i can hear sound from headphone simaltaneously but not in 7.1 speaker configuration.another annoying thing is that when ever i plug the headphone trebble and bass settings is restored to deafult.every time i have to keep on changing this when changing from 7.1 to headphone
I already tried all the option in eax console regarding heaphone options?
Is there any solution to use both headphone and 7.1 speaker together
Kindly help
Thanks

Still i cant use windows 7 because of this issue i would like to correct the administrator its not eax console its creative audio console and i used the default driver which is available on your site.
If i choose 2.1/4.1/5.1 mode i can hear in headphone too but if i switch to 7.1 no sound on headphone.
i love the feature that i can turn of my speaker controller and keep listening in headphone which i use in windows xp with out changing anything and if i need 7.1 just turn on the speaker volume controller.
I came back after months to see any solution still the audigy 2zs platinum rocks

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

Why magic jack apps is not working on my iphone 5?

why magic jack apps is not working on my iphone 5?

I have the same problem. I contacted magic jack, and after more than an hour of waiting, here is the final part of our discussion, before I had to leave to go to work:
Me: the magic jack app has worked fine for months unregistered. Never had a problem before. I must go to work now. I will leave the chat box open. if you could, send me a list of possible fixes and I will try to apply them when I get back. Please write in detail. Is there a way that I can get in touch and get a senior rep on right away to handle my problem when I get back, or do I hae to wait again when I call next time?
Kara: I am one of the senior rep here and in fact one of the supervisors . Here is what you are going to do:
Kara: Once you register the magicjack app into your Iphone, we can refresh your account connections here manually however if you dont register it, no options in our end to work for your connections since the MJ app is not used to be registered. No worries, we can remove your account if you dont want the service anymore for free.
+++++++++++++++++
So, it would seem that either there is a problem that they don't know about, or else magic jack is trying to force everyone to not choose option 3 on the opening screen, the one which allows you to continue to make a call without registering.
Has anyone received a solution to this problem from magic jack support?

I just connect one monse to my MacBook Air and now my keybord is not working

I just connect one monse to my MacBook Air and now my keybord is not working
What to do?

lrfrustrated wrote:
I just downloaded Adobe XI onto my macbook air and now I cannot save or print any PDF files. Will not let me do Print-Save as PDF, and if i do Save as i get a message saying that the file is corrupted. I had NO PROBLEMS at all doing this many times until i downloaded the new version. I have uninstalled and reinstalled, to no avail. I am super frustrated.
Print>Save as PDF - uses Preview (part of OS X), so Adobe Reader should have no effect on that at all.
As to the "damaged file" error, simply uninstalling the Reader app won't affect it. Do the following:
Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Mac HD/Applications
Trash the Adobe Reader app
[user]/Library/Preferences
Trash the com.adobe.Reader.plist file
To access the [user]/Library, hold the "Option" key and click "Go" from the FInder menu.
Mac HD/Library/Application Support/Adobe
Trash the Reader folder (the whole folder)
Empty the Trash.
Download the FULL installer here: http://get.adobe.com/reader/enterprise/
Quit your browser and reinstall Reader.
Launch it from the Applications folder and accept the license agreement.
You should have no problems downloading PDFs with Safari.
Unfortunately, ANY PDF that says it's damaged.... is. You'll have to trash them.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

No sound form :
- Speaker?
- Headphones?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Mic Plug And HeadPhone Jack In Tower Not Work

Similar Messages

Maybe you are looking for