Mic port issues

Hello,
Is there a setting or a pci card to correct a faulty "mini mic-in" port that originally came with the computer? We have tested it with many mics and also have gone to the system preferences and tried working with the sound function of the computer to no avail. My other computer works just fine with the mics that we tested and sound function in system preferences. What would be my next step? Would appreciate any feedback

Hi. This may be helpful in solving your problem
http://discussions.apple.com/thread.jspa?messageID=3670149#3670149
Please post again if it is something else.

Similar Messages

Anyway to get combo headphone/mic port to work on Win7 (iMac 27" '13)

Hi,
I just ordered a split cable for the 3,5mm headphone/mic port to be able to use my headset. OS X recognizes the headset - it changes from the internal mic to the external, so no problem with that. But when using Windows 7 (Bootcamp, not virtual) it's not possible to select the external mic, there's only iMac's internal mic listed in "Recording devices".
No doubt this is a driver issue, but is there any solution for it? And yeah, I could buy USB headset or external audio interface, but let's forget those options for now. Sorry if asked (and it surely is) many times before, couldn't find anything with google.
Thanks!
- Juuso

Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed'

MSI Gaming 5 USB ports issue

Hello everyone,
I apologize if I posted this in the wrong section, so as the title says it, sorta of a huge USB ports issue just happened after installing the motherboard / windows / all drivers, even restarted a few times
then tested the processor and video card.
Everything ok to that point, I left the pc opened for 3 hours, shut it down, the next day..I couldn't type the windows password.
Alright restart, that maybe one of those kinks that goes away on it's own I guess..Switched each device in different ports..nothing, tried only one device..still nothing.
Tried only usb2.0 ports then 3.0 port > a a little panic kicked in :D
So, in my bios I was seeing 2 keyboards 2 mice..ok...got a bios update from msi site..latest one..flash ..reboot..still nothing.
Strange part was..they were working just fine in bios and everything prior to windows loading, even after that mouse was showing power ( led was ok )but no functionality.
Safe mode didn't help..the miracle of last known good config saved the day.
BUT after choosing the option..ok it started working....randomly..I was typing the windows pass...and right in the middle ...it stopped again..mouse was working...tried again..stopped at 75% of the password.
Tried again...it worked > Reinstalled every driver.. seems stable for now, though being day 2 of this whole deal.
So if anyone honors me with enough time to read the story and maybe relate I would glady appreciate it.
Guys if anyone had any usb related incidents with any of the Z97Gaming boards please share
If I missed anything, please ask.
Thank you

Hello everyone,
Sorry for the delay in all of this and thank you for the input.
Specs are below, and this is something currently in the process of being upgraded.
I7 4790k / MSI Gaming 5 / Sirtec 500W / 8 gb ram Corsair Vengeance / AMD sapphire 7970 GHZ / one single HDD 1 GB
The Windows installation went fine on 2 other colleagues from work.
For the moment stable, I removed and reinstalled all USB related drivers.
It was a weird one though..

Any known 'porting' issues between 8.2.2 and 9.0 ??

Hi all,
we are in the process of evaluating LS ES2 (9.0) and would like to know if there are any 'porting' issues between the two versions. Asked another way, are there any issues in deploying a 8.2.2. LCA onto 9.0 ?
Dan

8.2 LCA's will run fine in 9.0 if they are just deployed into it. But in 9.0 a new application model has been introduced, so in order to make changes to anything after you've migrated it you'll need to create an application and migrate your processes and resources into it. You may want to take a look at the Leveraging Legacy Solution document available online. Here's the link: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=leveragingLegacy. html .
Chris

Need help on Audigy 2, mic port is not work

Well, here it goes. I just recently formated and reinstalled windows. I did the dri'ves for my card, got all the sound out puts working. When I go to use my mic, I can not get it to even work. I changed my mic's out and still got nothing. I looked at all the input opitions, messed with mute and unmute still nothing.
I would gladly be greatful if someone could help to releave this problem of mine.
Thanks!

Those drivers are fine for your card.
Onboard sound is a separate sound 'card' which is integrated into motherboard ... it normally becomes disabled automatically when another audio device is present but not all systems does this w/o changing some BIOS settings regarding Onboard Audio.
You can disable the onboard sound through "Device manager" by just selecting "disable"? on device properties for onboard sound.
Did you run the mmsys.cpl and checked if those play and recording devices are correcttly set ... also, as you maybe don't? have Creative Surround Mixer available, then did you enable the Mic port (start run... sndvol32.exe (sndvol32.exe /R for recording options)?
Are you sure you have connected the microphone correctly (check on the user's guide (you'll find one from downloads if you have lost your CD))?
jutapa
Message Edited by jutapa on 07-3-2008 0:09 AM

To acess the mic port on the motherboard

i m building a lan chatting softwere. i got stuck in the problem to acess mic port on the motherboard. please help me out of this problem.thanx

There is not really a "mic port on the motherboard". It's part of the soundcard, and it's AFAIK represented by the soundcard's "recording device" driver. Did you ever have a look at JMF?

Airport Extreme Skype works, but not mail or Safari? Port issue?

So I have a weird issue with my AE.
Often the internet will just go away...Safari will not work, iChat will not work and mail will not work. Today when it happened I noticed Skype was still logged in and working. I hadn't noticed this previously since I just this week installed Skype. When I am having an issue with my MacBookPro the MacBook in the house also has the same issue so it can't be my computer.
I also don't think its comcast because of the whole Skype working fine thing. Also when I "borrow" someone elses wifi connection everything works...mail works, Safari, etc...
So it must be something with my Airport Extreme. The only thing I can think of is some port issue. The AE has the lastest firmware from a month ago or so...
This tends to happen about once a week for a few hours and then it suddenly gets better for no apparent reason. The AE is in a cabinet in the entertainment center so it gets a bit warm in there sometimes but this morning it was pretty cool in the house and it still did it so I don't think its heat related...
Any other thoughts?

naw i'm back in the states now so it's pretty much no longer an issue. thanks though! If you know anything about mirror agent and logout issues you could look at my other question in using mac OSX Tiger called "mirror agent & failed logout -- HELP!"
thanks!!

Mic Port Problem

I bought a Toshiba Notebook around Christmas. Recently, I bought a Mic and noticed the port has something in it so I can't use the port. How can I get this fixed?

What Toshiba notebook did you buy? What is the full model number/name? What is your model's part number? You can find this info on the Toshiba label on the bottom of your laptop. Windows 7 32bit or 64bit?
Exactly what make and model of mic did you buy? What port has something in it? Mic port? USB port? Does your model not have a built-in mic?
Mike

Is 10.9.4 having USB port issues?

Is 10.9.4 having USB port issues? I'm noticing copying files to USB ports on my Mac Pro (the front two anyway) seems to be like molasses and give me the pinwheel of death.
Anyone?

Try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

AA3 Sound input from computer mic port-help needed

My new HP desktop has Vista 64 home premium (with creative soundblaster soundcard upgrade) and
I've installed audition3 and have it working fine when using audio files
but now I want to record audio using the mic port on the desktop. I have a headset mic (from dragon speaking software)
and the windows sound recorder hears the mic just fine. I am going nuts trying to get AA3 to hear it!
Any turotials I haven't found yet?

I spent 3 hrs at it, durin and steve thanks! now
there is audio from the mic input in edit view. I hope to find it in multitrack view but need a break!
my problem with vista is that i'm so anti-change that i'd rether stay with it. I dont know how to change to Win 7 and as Steve says there3 is concern that we waqit for next version so the bugs are fewer. like Steve, I liked XP; I would take it back, but I'm not a tecchie and have no time to learn these thiongs.
thanks again
JohnO

Charging port issues

So I see almost everyone that has the Incredible 2 has had a charging port issue. I love it how one Verizon store told me it was a known issue and another store said it wasn't. It seems like it is well known and Verizon nor HTC wants to own up to it. Everyone that has this issue should not have to pay the $99 out of warranty fee for a refurbish phone. I got to wait a month to get my upgrade. The only way my phone charges is through my laptop usb cord which is weird but not my wall charger. To be honest, I might have to switch to a different brand or maybe even go to a different carrier.

Well, when you see how many people are on here writing the same issue and a Verizon rep replying to trying to take care of it, its going to be a known issue. Even called HTC to see how much to fix through them. The gentleman has had calls in the past and recently about people complaining about the same issue. I know Verizon stores don't fix these issues in the store, but I expect better from a smartphone. All of my phones in the past never had this issue.
Regarding the service, Verizon still has the best in my area.
When you work retail, you should help a customer try to fix there issue by at least mentioning someone who can fix it.
Not just trying to sell another product. That isn't good customer service.

MDD mic port

I was reading some of the threads regarding the mic port on the MDDs (because I can't seem to get mine to work with the mics I have). Turns out the old Apple talk mic isn't compatible (no prob). Used 2 other newer mics, doesn't work (but they work on my...ahem...PC). Then I read something about "mic preamps" that you connect your mic to, to boost the voltage going into the port. But these are expensive, and completely pointless for day to day use.
No ordinary mic will work in the in-line port. Why is it like that with these MDDs. My older G4 never needed anything like that? I plugin any mic, and boom, it works.
I also read about iMic. But that connects via USB. So what's the point of having that line in port if you can't use it. Unless, of course, your willing to dish out some cash for preamps. All I want to do is talk with friends on-line via webcam, and use voice recog apps.
Anyone have a simpler alternative to get a mic working on this system? Perhaps a mic that's built specifically for the MDD.
Thanks.
G4 MDD Dual 1GB, 1.5GB ram, LG DVD-RW + Superdrive Mac OS X (10.4.8) 80GB, 120GB, 2x 250GB HDs, Radeon 9000 128MB

Well, after some searching for these "mics with their own power supply", I have found out there is no such thing. The closest answer I've gotten is plugging a mixer (using a 3.5mm jack to RCA audio input jacks) to the available input port. And then plugging any old mic to that mixer/audio board.
That or the iMic. I don't like speaking ill will of Apple, and rarely do. But boo to them for this. Something as simple as using any mic (as you could with previous G4s), now becomes an expensive (not to mention unnecessary) venture.
Just wondering why Apple did this, and only for the Quicksilver and MDD models? Other than the obvious "cash cow".
Looks like I'll have to get a USB mic. The question now, is will ANY USB mic (not headset with mic) work on the MDD?

IPhone 5c Orange EE PORTING ISSUES/SMS Problems

Hi,
I upgraded from Orange to EE a year ago and opted to keep my original phone number.
The day I had the phone I restored all my settings from the cloud. Everything worked fine apart from SMS messaging to non-iPhones.
I found out that I only had the email selected on the send and receive section of the settings, at the time my was greyed out and I could not select it, this has now disappeared completely!
I rung EE customer services and we went through EVERYTHING to try and fix this phone so I could send SMS messages. They told me it was a porting issue and it would be resolved in a week or so, but a year on, I'm still brother getting my SMS service.
Also although iMessage works, it still says waiting to connect in both message and face time settings.
I've tried everything with this phone and not even EE could solve it.
What's going on?

Hello
Welcome to the EE Community! Wow, you're a patient one! Waiting a whole year is a very long time - I'd definitely advise you contact the team again to get this put on the radar again. Here's how to get in touch with the EE Customer Service team:
If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
150 from your EE mobile phone
If you're ringing from another phone, it's 01707 315000
For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT STATE SERVICE VERSION80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT STATE SERVICE VERSION
80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open tcpwrapped
443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5: 9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open netbios-ssn
631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open tcpwrapped
7435/tcp open tcpwrapped
8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open jetdirect?
9220/tcp open hp-gsg HP Generic Scan Gateway 1.0
137/udp open netbios-ns Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open snmp SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
| Wifi0
| IP address: 192.168.1.211 Netmask: 255.255.255.0
| MAC address: a0:d3:c1:bd:c8:32 (Unknown)
| Type: ethernetCsmacd Speed: 10 Mbps
| Status: up
|_ Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
| TCP 0.0.0.0:7435 0.0.0.0:0
| TCP 192.168.1.211:56076 15.201.145.52:5222
| UDP 0.0.0.0:3702 *:*
| UDP 127.0.0.1:666 *:*
|_ UDP 192.168.223.1:67 *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
| NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
| Names
| HPA0D3C1BDC832<00> Flags: <unique><active><permanent>
| MSHOME<00> Flags: <group><active><permanent>
| HPA0D3C1BDC832<20> Flags: <unique><active><permanent>
| HPPS7525<00> Flags: <unique><active><permanent>
|_ HPPS7525<20> Flags: <unique><active><permanent>
| smb-security-mode:
| Account that was used for smb scripts: guest
| User-level authentication
| SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT ADDRESS
1 23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
 Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

XI- Xi Scenario XI Adapter (Port Issue)

Hi all
 we are implementating File - XIA--|Internet|--
XIB -File.
At XIA i am using XI Adapter(receiver)
 Message protocal HTTPS
At XIB I am using XI Adapter(sender)
 Messaage protocal HTTP
Now the issue is
 XIA is using HTTPS protocal , that means it will post data
to port 443 ( HTTPS Port)
 But at XIB message protocal is HTTP.
So which port at XIB we need to open HTTP port or HTTPS port
Note: Both XI are at different landscape.
receiver : XIA communication channel to post data to XIB.
sender : XIB communication channel to receive data from XIA
we had gone through these blogs before posting this query..
Re: XI -> XI scenario
Re: XI to XI connectivity
connection XI to XI
Re: XI to XI connectivity
/people/abhy.thomas/blog/2007/01/18/xi-content-certification-in-a-b2b-scenario--case-study
/people/alwin.vandeput2/blog/2006/06/07/d-xie-soap-part-4-xi-software-component-architecture-for-point-to-point-scenarios
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii
Regards,
Ashutosh

hi,
have a look at this guide:
How To Configure Message Level Security in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2e7020d-0d01-0010-269c-a98d3fb5d16c
is shows how to connect two XIs (one is "small XI" PCK)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Mic port issues

Similar Messages

Maybe you are looking for