Mic Probl

I recently purchased a sound blaster audigy SE and i cant get my microphone to work. I have diasbled my integreated sound card and still no results. I have been messing with the microphone for a while now and nothing i think of works. If you can help me i'd appreciate it alot. Thanks in advance.

I'm srry for Spaming your forum , I solved the problem -.- Reading other posts
So no need for answer ?

Similar Messages

  • Audigy 4 Pro Mic probl

    Hello, it's me agian... I'm having massi've problems with the my mic on my Audigy 4 pro, I plugged my mic into the front line /mic in using that big connector that came with the sound card but no matter what I do I cannot get it to record at a decent level, could you tell me what settings to use, the mic was fine with the Audigy 2 ZS gamer I had.... thanks

    This seems to be an option that creative have left off the control pannel, on most cards you have the option to use mike gain.
    On the Audigy 4 Pro creative have left this option out for some reason, maybe someone from creative might like to post a comment on this, as i have the same problems in voice over net conferences and i never had this problem with li've 5. platinum card.
    Maybe a ploy from creative to get you to buy their headsets i:e HS-300

  • XFI xtremegamer + windows xp = mic probl

    So I have tried everything to get my mic to work. From software upgrades to even enabling my onboard sound to see if my mic was bad but nope it works on the onboard mic port.
    So any suggestions why my mic wont work on the sound card? Is it because I do have a front jacks on my tower and I have those ran to the sound card? I havent had the opportunity to un plug the front jacks but could that be the issue? And If so why?

    okay Katman, thanks for that post.
    Here are the specs for the two microphones:
    ==================================
    This one does not work (or it does, but I need to yell for it to be picked up very faintly).
    MEDUSA 5. Specs:
    =======================
    Surround Sound Headphones - SINGLE USER SET - Speed Link Medusa 5. - Features:
    TECHNICAL SPECIFICATIONS:-
    AMPLIFIER BOX:
    ? Power Supply: 7.5 V DC/500 mA
    ? Output Power: 500 mW x 6
    ? Signal/noise (S/N): - 60 dB
    ? Distortion: <0.5%
    MICROPHONE SPECIFICATIONS:
    ? Capacitor Microphone: Dia. 9.7 mm
    ? Directivity: Omnidirectional Microphone
    ? Impedance: 2200
    ? Sensitivity: - 60 dB -+ 2 dB
    ? Frequency Response: 30 Hz~6 kHz
    ? Working Voltage: 4.5 V
    LOUDSPEAKER SPECIFICATIONS:
    ? Surround Sound Loudspeakers (front/rear);dia. 30mm x2, 32, 20 Hz-20 kHz
    ? Centre Loudspeaker: dia. 40mm x2, 64, 20 Hz-20 kHz
    ? Subwoofer: dia. 32mm x2, 8, 20 Hz-20 kHz
    Here is the spec for the el-cheapo no name brand (this one does work).
    ?http://www.maplin.co.uk/Module.aspx?...o=24698&doy=m5
    No-Name Spec:
    ================
    Specifications:
    Frequency response: 00-6Khz
    Sensitivity: -67dB+/-4dB?
    Output impedance: Low impedance
    Directional: Uni-directional
    S/N ratio: More than 40dB
    Does?the fact that the impedance on the medusa mic?( 2200 ohms ) have any bearing at all. I?have been reading about impedance matching and the concept of "bridging" but?I can't tell if this has any?relevance to my problem at all. I am currently searching the internet for more "impendance matching" topics and if there are any available impedance matching adaptors in 35mm(!). I am clearly lost as to wether or not this is even the right path to be searching along so if you?have any pearls of wisdom,?don't be shy...
    I read somewhere that at 2200 ohms, the medusa mic can be loosely categorised as a "mid-range" mic. While the el-cheapo is low range.

  • Audigy SE Mic Probl

    I recently got an Audigy SE and plugged in my headphones to the Line-in (Green plug) and the mic to the "Flexijack" (blue plug). Now, my mic is not recognized by Windows. If I try to open Teamspeak. it says I do no have a sound.out device. If I try to test hardware, it does not see the mic. I am sure it is plugged in the correct spot. Furthermore, I went into the mixer and apparently the microphone can be set both as a source and a recording device. Anyway, I went in there and made sure mic was set as a recording device. Whenever it is set as the recording device, I hear a low hiss in my headphones, yet when I switch my mic to the headphone plug, it doesn't pick up on the mic there, either.
    So, basically, the card is not picking up my mic, and if I have my mic unmuted, then I hear a hiss in my headphones. Anybody have a suggestion?

    Same card, same issue with the mic not being recognised even though the line is swithced off.
    There are a lot of issues here posted that go unanswered and unresolved and i think the lack of input or help from creative admins says quite a lot.

  • Sound Blaster Live (Mic proble

    I am a guitar player and I use a program called Guitar Pro to read sheet music and to tune my guitar quickly. However ever since I got a SB Li've it hasn't worked at all.
    The microphones will record but only if I have my guitar at a crazy crazy volume.
    I know it's the microphones because I've tried four different mics already (one being new out of the box).
    I have the record volume all the way (even with mic boost 20db) and all options are all the way up. Anyone have any idea?

    cowadvance, have you also tried increasing the volume at the Control Panel for Sounds and Audio Devices Properities?Hope that will help you.

  • Sound Blaster Mic Probl

    Hey I installed my SoundBlaster Audiology 2 ZS Gamer and my mic does not work any more. Can someone help me?

    Come on somebody should know!!

  • Xfi Fatality Mic probl

    I am currently having some issued with my MIC. The problem with the MIC is, that it wont transmit at all in windows sound recorder or in?a voice program like ventrillo. I have ensured that all the settings are not on mute, and everything to me looks correct. I am using a standard Logitech MIC that plugs into the back of the soundcard. The XFI settings are correct,and the MIC volume is all the way up in my console. Also the THX setup is set to allow a MIC/Line in. I am starting to think this maybe a windows problem.Message Edited by KradZZ on 0-30-20060:8 AM

    I am getting this error when I use windows sound record when I try to troubleshoot:?"Not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again."?The only thing is running is windows sound recorder, and I have 3 gigs of ram. Could the creative software be giving me trouble?Message Edited by KradZZ on 0-30-200605:53 PM

  • Card/Mic Probl

    alrite howsa goin all im new to these boards my names adam i li've in Bc Canada and i have a slight problem i just bought a microphone from radioshack and i tested it out at my g/f's house on her computer and it works fine i own a sound blaster audigy 2 platinum and i try the microphone on my computer i can record in sound recorder but for some reason my mic doesnt work on msn messanger or in any games but when im on msn in a voice chat it shows on the volume control as it is being used and it reconigzes it but nobody can hear me so if anybody has any suggestions how i could fix this problem i would forever be grateful thanks

    Did you happen to have the microphone volume mute off in Surround Mixer?
    Jason

  • Echo's and mic proble

    I recently bought an Creative Sound Blaster Audigy SE, which when installed worked fine at first until I installed all of the drivers on my computer. Since the install of the new drivers people can hardly hear me over the mic and I get echo's on and off about 50% of the time from just normal audio. I have reinstalled several times and made sure my connections were good and that they were plugged into the correct slot, and I also attempted trying without the drivers again but I still get the same problem.
    Please help.

    I do iChat audio conferencing all the time with my 12' Al G4 with Tiger. I simply use the built-in mic and the built-in speakers and everything works fine - I suspect yahoo messenger will work the same way. Try using what you have first - if that doesn't work out - THEN look at buying a headset.
    BTW, keep in mind you really can't both talk at the same time.

  • SB Audigy Platinum Front I/O Mic Probl

    Whatever i do, i just can't seem to get the microphone plug on the I/O module to work. When i plug
    my microphone in the back of the sound card itself, it works, but not when i plug it in the front.
    The strange thing is that the headphone plug on front seems to work, but the microphone doesn't.

    Hello, is this the place for an argument? Oh wait, that's a Monty Python skit, not real life. *ahem*
    So what I'm hearing is that we're basically on our own. Is it that hard to answer a simple question like, "How do I completely uninstall ALL my SB Fatalty drivers and install brand new fresh ones from the internet, and in doing so, hopefully reset my I/O dri've?"
    That's my question.
    Cheers,
    Phoenix

  • Need help with a mic and headset probl

    Ok heres the deal i have an Audigy 2 C400 or at least thats what it say on the creative volume control drop tab at the top. I recently bought one of those mic headset combos seen here http://www.logitech.com/index.cfm/pr...3,CONTENTID=00 with the two /8 inch stereo jack the would fit into the sound card. The problem i am having is i only get static through the headphone and the mic doesnt pick up anything. I plugged it in the recomended ports and got the. Then i tryed just the headphone jack in all the other ports and got either no result or just static. the mic wouldnt work period. Any insite to this problem would be much appreciated.

    Genisis_Rain,
    The C400 isn't the model of the soundcard. It's only a indicator of the resources range(computer memory) it's using. Assuming you have the original Audigy 2 card. Just to confirm, you have connect the headphone jack plug to the Line_Out jack on the soundcard. Check through the speaker setting application too and make sure the Digital Output Only option hasn't been enable.
    Jason

  • Lumia 920 Sennheiser CX 680i mic and volume proble...

    Hi all
    I just got a pair of Sennheiser CX 680i. They are iPhone compatible but I didn't know that they only partially work with my Lumia 920.
    The play/pause, skip forward and backward are working fine. But the mic and volume don't. I read that it's because apple products don't uses the AHJ standard.
    I would really like to be able to use the mic and vol control. Is it possible to buy some kind og adapter? Or are there any other solutions to the problem?
    Hope you have the answers out there...

    Refer THIS

  • Mic volume probl

    hi, i have a Creative Sound Blaster Audigy SE 7.. i never really wanted to use a mic on it until now. I plugged it in and spoke on Teamspeak. The other poeple say sound comes out, but the volume is really really low. I tried searching for a mic boost, but the option wasn't in the sound settings in the control panel. I also can't find the mic volume controller. Is there anyways to get my mic volume to go up? Btw, i am running Vista. Help is appreciated.

    I have said card, and it has no mic boost.
    I got the boost to work via windows registy.....see thread.
    It worked for me, but it seems some have problems with it.
    Take care if you try it, and back up registry first.

  • J'ai un problème avec mon zen mic

    boujour,
    je me suis inscrits sur se forum pour avoir une reponce a mon probl?me.
    je poss?de un zen micro 5go et suite au t?lechargement du nouveau firware 2.20.05 je ne peut plus utiliser le logiciel creative mediasource version 3.30.2 j'aimerais avoir une r?ponce s'il vous plais.
    merci par avance.

    ok, tu parles anglais? mon francais ecrit n'est pas fantastique.
    en tout cas, quel etait la version de firmware avant l'upgrade?
    Si tu switch de version .x (proprietary protocol) a version 2.x (MTP protocol), tu dois aussi installer d'autres plugin pour mediasource. Regarde les options dans le download section du site creative.
    translated : if you move from v.x to v2.x of the firmware, then install the proper plugins for MediaSource, because it won't work without.

  • Probléme firmwer zen mic

    bonjour,premierement je suis d?sol? je parle pas anglais br?f j'ai un creative zen micro de 6 giga depuis hier il s'alume sur le menu recovry mode mais je ne peu pas acced? au menu normal et quand je le brache a mon pc il le reconai bien mais il me dit qu'il est de 20 mo ,juste il faut que je pr?cise que quand je l'allume il me dit probl?m firmewar j'ai t?l?charg? les firmewar mais je peu pas le instal? il me dit le lecteur n'ai pas branch?vola j'esp?re que je suis clair svp aid? moi merci

    bonjour,premierement je suis d?sol? je parle pas anglais br?f j'ai un creative zen micro de 6 giga depuis hier il s'alume sur le menu recovry mode mais je ne peu pas acced? au menu normal et quand je le brache a mon pc il le reconai bien mais il me dit qu'il est de 20 mo ,juste il faut que je pr?cise que quand je l'allume il me dit probl?m firmewar j'ai t?l?charg? les firmewar mais je peu pas le instal? il me dit le lecteur n'ai pas branch?vola j'esp?re que je suis clair svp aid? moi merci

Maybe you are looking for