Mic problem after installing win7 through bootcamp

i am having a problem of mic in my macbook after installing win7 through bootcamp if any one have solution please mail me

yes, no luck there either.
Now I cannot boot at all.
I never had a problem wih the Mac OSX side only that crappy microsoft software. Unfortunately
there are a lot of woftware that I need for my work that only exist under micorsoft.

Similar Messages

Satellite A300 (PSAG8E) - Hardware problems after installing win7 ultimate

Hello and good day,
I've installed win7 ultimate a few days ago and windows managed to recognize most of my hardware accept my build in mic and camera and another component I am not sure about what it is (Windows update automatically downloaded the sound and graphics driver for me).
My questions are - where can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The driver site in the Toshiba support page does not include those drivers and software)
Thank you very much
Roi Ben Simon

Hi
I have Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfect.
At first I must say that I don't know where you have searched drivers and Toshiba tools and utilities because all stuff is downloadable on Toshiba support & download page under http://eu.computers.toshiba-europe.com
It is logic that mic will not work if you didn't installed proper driver. Install drivers alone and not using Microsoft update. What you need are real and tested drivers and not some free drivers from internet.
Go to Toshiba download page and install all stuff following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Everything works well but missing some drivers
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - work properly.
-Synaptics driver

After installing win7 in bootcamp mac mini start only in windows

I did install win 7 Home edition premium on my mac mini the same way as I did on my iMac.
After the install I could booth Win7 but there was no bootcamp icon and it would always boot in win7.
No way to go back to Mac OS whatever key press I tried. And there was no bootcamp.exe.
As I am unning Lion and there i no DVD I installed bootcamp in Windows using the leopard DVD.
After restart it came back to Win7 and now the bootcamp icon was there. THrough teh bootcamp
icon i was able to restart in Mac OSX. From there I checked the harddrive and no error was reported.
I then when to bootcamp and set it to restart in Mac OSX. It did restart but didn't boot at all. Just get
the beep and that's it.
Nothing helps: option, D, Shift, P&R,...
I had a problem before that the Mac Mini would shutdown with no reason and no warning at random
times. I brought it to the Apple store and they allegedly repaired it. Could this be related?
I have other Mac mini (Intel) older and also the previous version with the DVD as well as a Mac Book Pro
and an iMac with excatly the same configuration and never had any problem.
I need help thanks,

yes, no luck there either.
Now I cannot boot at all.
I never had a problem wih the Mac OSX side only that crappy microsoft software. Unfortunately
there are a lot of woftware that I need for my work that only exist under micorsoft.

Sound Problems after installing Win7

Hi all,
Updated to windows 7 two days ago, had to work out a few bugs, nothing major, but anyways some minor annoyance persists. I don't get the popup windows when I adjust volume/treble/bass and the mute button doesn't turn orange like it used to when I muted the laptop and I dont get the clicking noises indicating the level changes. Also I noticed that the speakers sound a bit different...kind of a horrid sound. I tried adjusting the equilizer but that didn't help. Minor inconveniences, I know, but I'd like to get my laptop working properly again. Anybody have any idea what course of action I should take?

Hi bovahi,
Welcome to the HP Community! I will be happy to assist you with your sound troubles. Here is the IDT High Definition Audio Codec for your model for Windows Vista. Try installing that and let me know how it goes.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Having problem installing Win7 using Bootcamp on Mac Mini 2011

I'm trying to install Win7 using bootcamp on my new Mac Mini 2011. I first partitionned the disc using Bootcamp assistant. Then during Win7 installation I select Partition 4 BOOTCAMP, format it to NTFS, then when I try to select the drive, it says that the drive is not compatible for the installation.
Is there anything I missed???
Thanks

I had a similar problem when I selected upgrade instead of complete install. I want to make sure your aware that you should click the complete option instead of upgrade when you reach that portion of the win7 install. Then you need to select part ion 4 like you have stated and format it to ntfs.
But it seems that you've already done all of that. My advice would be to go back to the Mac side, restore the partition using bootcamp and again partition it. You need at least 25gb of space for 64 bit. I would recommend using at least 40gb. Just trying to help. I apologize if I misunderstood your problems. But make sure you click on the opposite choice of upgrade, I did my mini last night lol but I can't remember the exact name of the option I think it's complete, then select part 4 and click format....

I'm new to the Mac world. I installed my Epson printer on my IMAC and it worked fine. Then I installed Windows7 through Bootcamp and I think it reconfigured a port and now I get a communication error and it won't print. Any help on how do to fix this?

Sorry, I'm new to the Mac world. I recently got a new IMAC and installed my Epson CX5800F printer and it worked fine. Then a few weeks later I installed Windows7 through Bootcamp and I think it reconfigured a port or something and now I get a communication error and it won't print. Can anyone help me with this problem, and/or help me get the port back the way it was? Thanks, Barry

While looking through profile first aid, I came across this that might help explain my problem.
Searching for profiles...
Checking 20 profiles...
/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/Standard.profiles/Contents/Re sources/Epson IJ Printer.icc
   Tag 'desc': Tag size is not correct.
   Tag 'dmdd': Tag size is not correct.
   Tag 'desc': Description tag has a bad Macintosh string.
   Tag 'dmdd': Description tag has a bad Macintosh string.
   The file is locked. Could not be fixed.
Repair done - 0 out of 1 profiles fixed.

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT1338 Can't access my mac os side after installing win7

I just installed windows 7 on my new mac using boot camp. I followed all the steps but after installing win7 there is no way I can access my mac os partition. I tried to reboot with the Alt/option key pressed but I am presented with a window asking me to provide a password. When I enter my password, it won't let me in. It just delete the password. I have re-tried several times but it won't work. My question are:
1. Is there any way I can install windows support software (for the driver) from bootcamp since I cannot access my mac side.
2. I tried to download and install bootcamp but it doesn't work since it says I do not need to install any bootcamp update.
3. Is there any ways I can go past the mac password screen? I really don't understand why it doesn't accept my password. I am the only administrator and user of my computer

#3. Try things in this Reset Password faq.
DALE

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

Can you use and iso version of windows 7 64 bit to install windows through bootcamp?

I saw windows 7 64 bit online cheap and it was and iso. If I put it on a disc, could I use it to install windows through bootcamp?

You can use the iso direct from Bootcamp assistant and put it on a USB if your Mac has the ability to boot from a USB flash drive.
If your Mac has a built in cd drive you will need to burn the iso to disc (as an image) and use that to boot from.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Problem after installing 10.4.8

Hello,
I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
Thanks...

How did you update? Mac OS X 10.4.8 Update (delta)?
http://docs.info.apple.com/article.html?artnum=304200
After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
2.0 MacBook • 100GB HD • 2GB RAM Mac OS X (10.4.7) 60G Photo iPod • AppleCare

DVD drive problem after installing 10.5.6

I have MacBook Pro 15",
Model Identifier-MacBookPro 2,2,
Intel Core 2 Duo 2.16 Ghz
Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
Before I install this update, everyting was ok!
Please Help!!
P.S Sorry, for my english

Hi Drug;
Have you tried resetting PRAM by holding down control, option, P and R during reboot?
Allan

Mic problem after installing win7 through bootcamp

Similar Messages

Maybe you are looking for