Mic troubles - Toshiba Portege M600

Hi
My inbuilt mic was working all these but stopped working suddenly.
-  Freshly installed the new realtek audio drivers from Toshiba website.
No luck.
I cannot use googletalk, skype, MSN chat for my conferences.  The mic is not detected when I try to set it up.
Is this a hardware fault ?

Many Toshiba laptops allow you to boot into a recovery mode that can restore the laptop from a hard drive partition. Try holding down the '0' key and then turning on the computer, continuing to hold it down.
It seems like your laptop isn't from the US. You might have more luck with the support site for the region from which you purchased your laptop.
- Peter
- Peter

Similar Messages

  • How can recover TCrdMain.exe in Toshiba Portege M600

    Hello,
    I have a Toshiba Portege M600, using Vista
    Issue is Flash Card - ProgramC:\ProgramFiles\Toshiba\FlashCard\TCrdMain.exe
    R6025 pure virtual function call
    can you tell me how to fix this?
    Thank You
    Simon

    Yes, you can disable the tcrdmain.exe, according that this is the one responsible for Toshiba Flash card ability.
    For this you can use the mentioned msconfig command.
    Just uncheck the .exe under startup, reboot and it shouldn't bother you again.
    I use this procedure for certain unneeded program I don't want to start and using precious performance.

  • Toshiba Portege M600 Recovery Disk

    Is there a way to recover portege m600 without using recovery disk ?
    cause i have a problem with my dvd drive so i cant use it.
    Also, where is the image files path located for recovery disk ?
    thx hope got some reply soon

    Many Toshiba laptops allow you to boot into a recovery mode that can restore the laptop from a hard drive partition. Try holding down the '0' key and then turning on the computer, continuing to hold it down.
    It seems like your laptop isn't from the US. You might have more luck with the support site for the region from which you purchased your laptop.
    - Peter
    - Peter

  • Portege M600 is not starting up

    Hi, I have Toshiba Portege M600 Laptop.
    Yesterday, it suddenly happened that my Media Player got hanged up and so I pressed the power button to switch it off and then again try to restart it. While trying to restart, its displaying the Windows XP screen continuously without moving ahead to the Login window.
    I tried starting in the Safe Mode, Safe Mode with Networking, Last Known Good Configuration also. But in none of options it worked.
    Please help me start my laptop.

    As Eldorado already suggested you should try to reinstall the installed OS using the Toshiba recovery CD.
    According to your message your notebook is not able to start and to boot the Windows OS and to be honest I dont see any other solution as to recover the OS.
    Possibly there are only faulty system files and the new installation would fix this issue.
    But if its a hardware issue (HDD) then you would need an help from the local ASP.
    I assume you warranty is valid and therefore every replacement should be done for free.
    Good luck

  • Portege M600 (PPM60L-04N00D) No audio outout device is installed.

    Hi,
    I have insllaled (clean install) windows 7 x32 on laptop Toshiba Portege M600 (PPM60L-04N00D)
    After it I have the issue with Audio device.
    In the system tray, the volume icon button is marked with X and it says that "No audio output device is installed.".
    In device manager, I don't see any devices look like sound/audio.
    Please guide me to resolve this problem.
    Best regads,
    yanto

    Portege M600 (PPM60L-04N00D)
    We support US computers at this site. Drivers for your Asian model are here
    When you look up the Portege M600 (under legacy models), you'll see that only Windows Vista drivers are listed. You can try that one if you like, but don't be surprised if it doesn't work.
       PORTÉGÉ M600 Vista: Sound Driver update V6.0.1.5473 (Part 1 of 2)
       PORTÉGÉ M600 Vista: Sound Driver update V6.0.1.5473 (Part 2 of 2)
    Your best bet is to obtain recovery discs from Toshiba in your region. All the drivers and Toshiba utilities are properly installed and Windows has been preactivated.
       Locate a Service Center
    -Jerry

  • Portege M600 - Nothing Appeared On Screen (After Shut On)

    Hello again all,
    So, yesterday, all of sudden I had no voice in my Portege M600. And today, I had no computer at all!!!
    I have no clue of what is goin on. Yesterday I still used my laptop until around 23:00. And today, I tried to shut it on around mid day, but it was nothing appear on the screen. I pressed the on button and the power light is on, so did the light of the processor. But the light of processor on just for a couple seconds and off again. There was no noise that I use to hear when the processor is running. I let it for minutes, hoping that it will work. But it was still not working. Then, I decided to take off the baterry to shut it down, coercively.
    I have tried to shut it on again for 3/4 times. But it still doesn't work. Nothing appear on the screen. Just the light of power and light of portege symbol are on (well.. as I have described the light of processor is on but for just a couple seconds).
    What's happened to my laptop??
    And how should I do now??
    For information, I live in city near Stuttgart (Germany). I googled that Toshiba Service center is in Neuss, where Neuss is far from my place. And I am on my examination week now (so it's impossible to go to Neuss). So, what should I do?
    Thank you in advance.

    > But.. what is going on with my laptop actually?
    Very good question but I think you should ask this question someone who has checked your notebook and ran some diagnostic tests
    Simply said you should contact the ASP in your country and should ask for the further handling
    The M600 is not very old and I assume the warranty is valid. In such case the faulty part should be replaced for free.
    Bye

  • Reformatting a Toshiba Portege m400 with xp or vista

    Ive tried reformatting both windows XP and Vista on the Toshiba Portege M400, both without sucess.
    For XP, Ive booted from CD, then at first I was having trouble getting the setup to acknowledge that there was a harddrive. Then I bought a USB floppy drive and installed the Toshiba RAID drivers by pressing f6 during setup. It loaded the file KR10I.sys. Then after formatting the partition and the installation began it gave me the prompt saying the KR10I.sys could not be read from the CD, even though it was loaded using the floppy. After pressing ESC to skip, it tells me that the CD is damaged and cannot be read. Ive tried this with two seperate XP disks so thats not the problem.
    For Vista, the setup begins and gets to about roughly 90% and gives me the error code 0xc00000e0, also stating that either there is hardware corruption or a bad disk.
    Any assistance or advice that you may offer would be greatly appreciated. It doesnt matter too much on which OS i get on the laptop so whichever is an easier fix. I would prefer XP however since I am more familliar with that OS.
    Thanks in advance!

    For starters...
    Which Portege M400? What is the part number? Which country?
    -Jerry

  • Portege M600 - Webcam driver open fail on Windows 7

    Hi,
    I have Portege M600 and already installed Windows 7 [RTM]. After windows update, everything running well for all hardware certify with Microsoft but, when I try used to webcam, the program show some error message:
    It say "webcam driver open fail. please restart camera or computer"
    Then I restart until twice again but nothing happen and show the same error. I check device is working properly. I already reinstall webcam software too.
    Any clue or suggestions ?
    ps:
    I used Vista 32 software as default driver
    Thanks

    Hi
    I completely agree with Akuma that you should try the Windows 7 beta driver for the Chicony webcam from the Toshiba US page:
    http://www.csd.toshiba.com
    But remember that Windows 7 isnt released as yet so its a little bit difficult go get tested drivers for it.
    Furthermore it would be interesting to know if the same happens with factory settings.
    Bye

  • Toshiba portege model A605-P200 won't POST bios unless I take out the battery and put it in again

    toshiba portege model A605-P200  won't POST bios unless I take out the battery and put it in again
    though, at times, it will, generally all i get  is a flashing cursor   NO  toshiba splash screen.  this seems to have started as an unsucessful  windows update
    i am getting  driver  freezing at crc.disk.exe   when i safe boot  when  i get  the machine to boot  past the bios
    thanks

    Unfortunately, it sounds like it might require servicing.
    - Peter

  • Hard Disk Replacement for Toshiba Portege R500-S5006X

    I have a Toshiba Portege R500-S5006X which is out of warranty. I would like to replace the hard disk. What hard disk should I purchase? What is the maximum capacity (size in GB), maximum RPM speed and size in inches I can use in this laptop? Will a SATA-2 hard disk work in this laptop? Any other information I need to know about the hard disk replacment? I would be happy to get an answer from an official Toshiba technician.
    Thanks,
              dandanl

    I don't know if the Toshiba people who post here are technicians, I suspect not, so you might be waiting for a while if that's the only person you would accept information from...
    At any rate, the standard drive in that computer looks like it is a SATA 2.5" 9.5mm thick.
    The following is a spec page for one of the stock drive options (they used a couple different drives, but pretty much equivalent)
    http://storage.toshiba.com/storagesolutions/archived-models/MK1646GSX
    As far as something of a larger capacity working, it should be fine, just keep in mind that a physically larger drive might not fit, so keep the height to 9.5mm

  • Archlinux on toshiba portege p2000 (2000)

    Hi,
    I just got toshiba portege 2000 from my employer with windows xp on it. I would really like to install my favourite system (archlinux) on it, but I have no idea how. The ways I excluded are:
    1: CD instalation. The only cd-rom I have is on pcmcia, and I does not work on boon.
    2: USB stick install. Portege 2000 wont boot from usb.
    Do you have any ideas that could help me. I really like the hardware but I will give it to another employee if it doesn't run linux.
    Thanks in advance,
    mdv

    Do you have a desktop computer you can take apart?  You can get adapters pretty cheaply to let you plug laptop drives into your desktop IDE controller.  So unplug all the desktops hard drives, and put the laptop drive as hda, and install as normal

  • Toshiba portege z935-p300 Space bar not working

    Hello everyone,
    New to this forum but I'm hoping you can help me out. So I have a client that recently spilled liquid on her keyboard (toshiba portege z935-p300) and the space bar button stopped working. I havent cleaned under the button yet but obviously I'll do that first.
    Typically when this occured I'd just go online and buy the entire keyboard tray and normally the issue is fixed. Well this specific keyboard I cannot find anywhere. 
    So the questions are does anyone know where I could find one of these keyboards? I found a site that sells the buttons for the keyboard which is what I'll be trying if I cant find the entire assembly. 
    Thanks in advance.

    HERE is one on Ebay for  $50. I've had very good luck ordering keyboards from Ebay vendors.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Intall Solaris 8 on Toshiba Portege 3440CT fail

    I want to install Solaris 8 intel on Toshiba Portege 3440CT. it has one USB floppy drive and one PCMCIA CD-ROM.
    When I use Solais 8 boot disk to boot the system. it just only show "SunOS..." on the top left hand conner and have no response. Should anyone know what happen to it?
    If it is related to USB device or fail to startup PCMCIA CD-ROM, can I create a Install server on another PC to use network installation?
    If the laptop PC is not possible to install Solaris, how I can verify it? Since Solaris 8 Hardware compatilable List do not have Laptop section, Did sun provide a PC utility to test whether my laptop is Solaris compatiable?

    Hi,
    Problem with PERC RAID controller card.
    You try to install the driver for AIC 7899 and Dell PERC RAID controller card. In dell computers, they have dell PERC RAID controller driver for Solaris 7 version. They don't have the driver for solaris 8 version.
    You can download driver for SCSI AIC 7899 from this URL:
    http://www.adaptec.com/worldwide/support/driverdetail.html?cat=/Product/ASC-39160&filekey=u160_slrs_v121_dd.img.Z
    Then you check with your local dell support provider for PERC RAID controller driver for solaris 7 and solaris 8.
    Thanks.
    revert back.
    regards,
    Senthilkumar
    SUN - DTS

  • Toshiba Portege Problem: *Battery is not charging and web camera initialization failed.*

    Hi, 
    I am having problems with my Toshiba Portege laptop. 1) Once laptop opens, window appears which says, "Web camera initialization failed. Please check your camera device and restart application or computer." Not sure what happened why the web cam application did not run properly. 2) Battery won't charge. When clicking the battery icon, it just says, "0% available plugged in, charging." I  can not open my laptop when the cord is unplugged. 
    Appreciate if you can help me or any advice.
    Thanks,

    always good to tell what Portege and what system is running...
    anyway -
    to #1
    an autostart process requests the camera, maybe Skype?
    some web cams on USB ports do take some time
    been initialised especially when attached via hub.
    Windows boot sequences do not wait until they finished.
    if the camera is working after a while than thats here the
    case despite that message and it can be ignored.
    to #2
    forget the software symbol for the purpose of the question -
    on any notebook you should see a battery symbol/LED
    somewhere on the case. its yellowish/orange when
    charging green when battery is full.  if it doesn't change into green
    (overnight charging) the battery is faulty or even missing...
    regards
    Damian

  • Does Toshiba portege t130 supports 64 bit windows OS??

    I have a Toshiba portege t130 laptop..it had 32 bit windows 7home premium os...I have formatted it with the 64 bit OS..now it starts hanging a lot...does it really support the 64 bit OS??

    Unless your RAM exceeds 4 GB, there is nothing to gain by installing 64-bit Windows.
    But there are lots of things to lose with 64-bit Windows. It cannot run any 16-bit applications. That includes all DOS applications. It cannot even install 32-bit applications that have 16-bit installation packages.
    In order to run 32-bit programs, 64-bit Windows needs to emulate the 32-bit environment and run the programs there. So it runs most everything slower - not faster. Usually, you won't notice the slow down. See KB906892 for an extreme example. Eventually, there will be 64-bit applications. But for now they are rare.
    Many older peripherals have only 32-bit drivers.

Maybe you are looking for