Mic works in Settings but not Echo Test

My Bluetooth mic works in Audio Settings with excellent levels but when I use the Echo
Test Service my voice does not record.
I have tried re-installing Skype with no result.
Help would be appreciated.
toneyes

boast wrote:I think its with setting asound for the correct default mic, but the wiki is only for USB and previous forum posts didn't have a solution.
USB or not doesn't matter. People usually have trouble getting the mic working because they use USB cards which are not the default of their systems, so you can try the said fixes, it should work.
For skype, did you check the Skype settings for where it inputs/outputs? Skype might be trying to use PulseAudio even if you don't have it...
You can try setting the default device in your asoundrc:
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
Replace "card 0" with the correct card, like "card 2,1" or "card 1".

Similar Messages

Mic works with SoundRecorder, but Not Skype

I've used Skype for years. Today, I can't get the microphone to work with Skype 7.4.0.102.
I can record using my headset mic with MS's SoundRecorder, but no sound seems to be detected with Skype. I tried restarting, but that didn't help.
Solved!
Go to Solution.

I made sure I had the latest Realtek HD Audio driver from my computer maker. I used the Realtek HD Audio interface to set the mic gain to +20 db and turned off audio effects. I also adjusted Skype’s audio settings, but Skype 7.5 still required me to SHOUT to be heard. (I’ve used Skype for 7+ years, so I’m used to making sure my mic is setup correctly before making a call.)
Thanks to a private Skype Community message from Capreolus, I was able to download the full-version of Skype v6 point 21.
I can now use Skype with a normal speaking voice. (Hurray!)
Of course, I’ve had to disable automatic Skype updates and say “No” to updates for the near future.
It’s too bad the tech people at Skype don’t seem to be able to duplicate the problem. My computer’s only 2 years old, so recent software it should work fine.

Variable works in Dev but not in Test in Webi report

Hi All,
I have written a variable to calculate Average. It works fine for all entries in Dev. But when I transport it to Test Environment, it works fine for some entries and does not work for some entries.
Any suggestions?
This is happening in WEBI Report.
Regards
Edited by: No.One on Sep 21, 2011 2:45 PM

Hi,
Compare the formula of the variable in Dev and in QA. Might be some operands might bwe missing in QA environment.
Cheers,
Suresh Aluri.

I am not able to hear any sounds of games on the speaker. Though the sounds function on the head fones. The speaker works perfect in other applications except games.Have checked all the settings but not able to fix it.

i am not able to hear any sounds of games on the speaker. Though the sounds function on the head fones. The speaker works perfect in other applications except games.Have checked all the settings but not able to fix it.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and its the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If that doesn't solve it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My external iSight works in iChat, but NOT quicktime 7 pro

I'd like to get in on this...
My external iSight works in iChat, but NOT quicktime 7 pro when i try to make a movie recording. No audio, no video, nothing. But, iChat works. This is on a brand new mac pro with the latest leopard. Any ideas????

Hello Tommy Igoe
With no other video capable apps running and your working iSight connected and turned on when you launch QT 7 Pro, try these suggestions to see whether one of them fixes your problem:
(0) Try all suggestions applicable to your system from Apple's How to Troubleshoot iSight.
(1) Check that your QuickTime Player > Preferences > Recording settings are correct.
(2) Repair Permissions and test to see if iSight works with QT Pro now.
(3) Disconnect all peripheral and test again to check for hardware or software conflicts.
(4) Download and reinstall QuickTime 7.4 for Leopard. Repair permissions and test movie recording.
If you must post back for other suggestions, please clarify and expand on your QT problem. Please be specific. For example, can you see but not execute the QuickTime Player > File > New Movie Recording menu command? Can you execute the menu command but find that the recording window does not open? Does the recording window open but you find the "Record" button is not clickable? Etc.?
Also please tell us whether you found that QuickTime is the ONLY problem app in EVERY user account you tried when you used Apple's Troubleshooting suggestions.
Finally, if you currently have ANY other problems with your Mac, please describe them all.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

Why does the counter work in MAX, but not Labview?

Please help, I have been away from Labview for over 3 months, and I am quite rusty....
Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal. Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below.. How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

OK, now. Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi. Now that the connections have been tightened up, it works for both. Sorry for the inconvenience.
Dave

My apple id works on itunes but not on my ipod touch, what gives ?

my apple id works on itunes but not on my ipod touch, what gives ?

What are you trying to do on the iPod?
Have you went to Settings>Store and sign out and then sign back in?

Flash Player works in Safari but not Internet Explorer 9

I've installed Flash Player 10.3 and it works in Safari but not Internet Explorer 9. When I look in Manage Add-Ins I see Flash Shockwave but not Flash Player. My operating system is Windows Vista Ultimate (32bit). Safari is 5.0.5 and IE 9 is 9.0.8112.16421. I've tried uninstalling and re-installing Flash Player and uninstalling Norton 360. Nothing has worked so far. Can you help?

Thank you for your reply. Shockwave is loaded and enabled.
The files in flash directory are: a folder called FlashPlayerTrust: file, flash10q.ocx: file, FlashInstall.log; file, FlashUtil10q_ActiveX.dll; file, FlashUtil10q_ActiveX.exe, file, install.log.
There is no file: NPSWF32.dll.
When I test the browsers I get no spinning logo in either Safari or IE9. Safari says: missing plug-in, where I think the logo should be. IE-9 says nothing at the same location.
Thanks.

Spry menubar works in IE, but not Firefox

I added a very simple Spry horizontal menubar to the top of all pages in my web (I'm using DWCS4 and Spry 1.6). When I preview it in Firefox locally, it seems to work, but when it is uploaded to the web server it works in IE, but not in Firefox. Instead of a menubar, I see a stack of bulleted hyperlinks. In IE, it displays properly.
Website is http://www.stevegoldman.com.
How can I fix this problem so that it works with all browsers properly?
-- Martin

I just tested your site with firefox (latest version) and it works just fine. I also tested it in IE: 7.0 and it worked fine for that too. Looks like you have either fixed the problem or you have a different version of firefox than me or something.
Favorite qoute: "do unto other as you would do unto yourself"
Favorite hobby: airsoft / electric aeg airsoft guns
Airsoft Sniper Rifles

Link works on mac but not on pc

Hi -
I am trying to insert a jpg into a dreamweaver file.
I then upload the html file along with the jpg to my server in a folder called "layout"
So the url is: http://www.mysite.com/layout/test.html
The link works on mac, but not on pc's.
Any idea why?
Some links work on pc's like this, and others don't.
Thanks- It's driving me crazy!!

The link is not correct....you have it listed as" mysite.com", which I assume is where you are to insert the name of your url.
Gary

Flash 10 works in FF but not Safari, OS X 10.5

About a week ago flash stopped working in Safari and both firefox and safari started bugging me to install a newer version. Muttering, I went to the download page and downloaded the latest, which claims to be for Safari, Opera, and firefox.
Installation completes fine with no errors. Firefox works. But in Safari, I just get the usual 'no flash installed, would you like to download it?'
I've downloaded and installed multiple times, no dice. Plug-ins are enabled on Safari. I do not have settings folders to delete--/Library/Application Supprt/Adobe has no flash player folder, only Acrobat, Updater6, and Help.
This whole thing is a black box and I don't see what else to do. Installation completes and there's no way to verify anything. Any ideas would be welcome.

Thanks! BTW I'm also having trouble updating Adobe Reader. I have 9.4.0 and want to update to the new Adobe Reader X. I keep getting Error 1402 which refers to the registry keys. I am unable to completely uninstall the old version. After receiving the error message it reloades the older version. I read about how to modify the registry to accept it but I believe this is a very wierd way to have to get an update loaded. Any suggestions?
Date: Mon, 27 Dec 2010 10:34:22 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player works in IE8 but not Safari
Hi Bruce, Adobe Flash Player is Installed separately into IE, since Windows uses the ActiveX Control. Firefox and other non-IE
browsers must use the plugin Installer.
This is the Adobe site :
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Hope that explains it.
Thanks,
eidnolb
>

UTube video sound works on iPhone5S but not on Macbook Pro?

UTube videos from a variety of sources works on iPhone5S but not on Macbook Pro? Thinking it has to do with recommended Flash settings on the MAC. Is there an app to resolve this inoperability on a MAC without having to make Flash active?

What format is the video? Is it .wmv? Do the DVD's have any type of protection or encryption? This information will help in finding a solution.

SetMask works in movieclip but not in scene

I am using the tutorial code:
maskee.cacheAsBitmap = true;
maskMC.cacheAsBitmap = true;
maskee.setMask("maskMC");
and when I put the elements in a fla file by itself, or if I
test the movie clip (not the entire scene) it works fine. But if I
test the entire scene, which has the movie clip that has the
masking going on - it does not work. What am I missing? I tried
adding the _root.mcname to the script but that doesn't help.

sorry gang - I figured it out - I was missing all of the
nested movie clip names so my final code looked like this:
_root.navigation.name.maskee.cacheAsBitmap = true;
_root.navigation.name.maskMC.cacheAsBitmap = true;
_root.navigation.name.maskee.setMask("_root.navigation.name.maskMC");

Applet works in Netscape but not IE

Very basic Hello World applet. IT doesn't work in IE 6. Not sure why.
html source:
<html>
<body>
<applet code="test.class" Width=640 Height=480></applet>
</body>
</html>
Anyone know why?

I do have java runtime installed. I used java SDK 1.4.1. What runtime do I need installed for applets made with this version of java? I have the 1.4.1 runtime installed. It doesn't make sense to me that it would work in Netscape but not Internet Explorer. Any help would be great. Thax

Rollovers works in Camino but not Safari

Does anyone know why my rollover stopped working in Safari,
but it works fine in IE and Camino?
I did a simple rollover to display before and after images
and I swear, yesterday when testing it in Safari It worked fine.
Today it doesn't work on any of my 3 macs here. It displays fine on
WinXP and IE, and in Camino on my Macs.
here is the page.
www.chipwillis.com/retouch
Any ideas are most appreciated.

Thanks! BTW I'm also having trouble updating Adobe Reader. I have 9.4.0 and want to update to the new Adobe Reader X. I keep getting Error 1402 which refers to the registry keys. I am unable to completely uninstall the old version. After receiving the error message it reloades the older version. I read about how to modify the registry to accept it but I believe this is a very wierd way to have to get an update loaded. Any suggestions?
Date: Mon, 27 Dec 2010 10:34:22 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player works in IE8 but not Safari
Hi Bruce, Adobe Flash Player is Installed separately into IE, since Windows uses the ActiveX Control. Firefox and other non-IE
browsers must use the plugin Installer.
This is the Adobe site :
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Hope that explains it.
Thanks,
eidnolb
>

Mic works in Settings but not Echo Test

Similar Messages

Maybe you are looking for