Mice / display resolution in photoshop

hi there!
my question is about:
i bought a new mice, logitech g9 with 3200dpi, (and use 2 monitors, sony gdmfw900 24"-22,5" viewable with a resolution 2048/1280 pixels ),
i thought to get a better result in using ,like brushes, photoshop.
still see interrupt lines, and not sharp ones how would like.
somebody knows about this problems or knows where to set changes in photoshop?
thanks for help!!!
reptus

i have no any idea where could be the problem,
could be the hardware?
where i guess the pc with 3*ghz/2 + 6gb ram should get it..
i changed mousemap, ...screen resolution,...windows mouse properties,
allready before the change of mouse exist the problem,
strange

Similar Messages

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it. Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read... I sent on the PC setting to try to change the display resolution.

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it.
Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read...
I went into the PC settings and tried to change the display resolution. This changes the size of all the icons (not only Adobe) but it does not solve the problem when I open an Adobe application (Photoshop or Illustrator)... The PC is run under Windows 8.1 and my display resolution is 3200x1800 (but again, when I change the settings for a smaller resolution, only the size of the icons is affected. Once I open the software, the problem is still there, extra-small toolbars...). Help!!!

Anything before CC is not high-DPI compatible. Feel free to continue to experiment with your system settings.
Mylenium

Page display resolution setting

Many or all CS5 apps would benefit from the same kind of Page Display preferences that Acrobat Pro provides. It allows you to set page display resolution at the pixels per inch setting that will display content at true actual size (100pct viewing). By that I mean an 8.5x11 page on screen is the same size as an 8.5x11 page in your hand. It may be that Acrobat's default "Use system setting" figure (81ppi on my display) is all that's needed to get reasonably close, but InDesign, Illustrator, Photoshop, etc., don't have this ability. And Acrobat can be setting to any ppi that gets the job done. Print designers, especially, need true actual size to have a better feel for the scale of the physical piece and design elements on it, notably including type.

That's a fair answer to a load of nonsense ...
1. The original poster was not concerned about pixels, and in fact showed by his very feature request that he was acutely aware of the difference between pixels and real, actual, physical dimensions. The OP did not ask for, nor does he want, measurement in pixels -- in fact, he wants the exact opposite.
2. There is no measurement unit called "pixel". A "pixel" is not a defined distance, and there are no online conversion tools to convert between picas or inches and pixels. If there are, they are a load of nonsense as well.
3. Good news is that CS5 has, yeah!, "pixels" as measurement units. But ... since the pixel is not a really existing unit of measure, it's of no use at all and you might as well pretend (in your mind) what CS5 pretends on the screen: one pixel equals one point.

Fixing Page Display Resolution

Hello
Is it possible to fix the display resolution of a PDF file at 96 pixels/inch by some means?
I am developing some e-learning content which I would like to distribute as interactive PDF files. I intend to use InDesign CS5.5 for the layout work and have been creating some test screens.
It falls apart when I add movies onto my pages. Once saved as an interactive PDF file and opened in Adobe Reader the quality of the movie is very dependent on the page display resolution set in the individual user's preferences.
If they have their preference set to anything other than 96 pixels/inch the movies look poor. We develop the movies on our Macs at 72 pixels/inch and can overcome the change in resolution to 96 pixels/inch by changing the page setup to 75%. The resolution though is out of our control and i wondered if we could overcome this by some neat scripting.
Thank you.

Simple answer is "no, but there's another way".
PDF pages display in physical units (points) so the concept of "100%" is actually meaningless on screen - the chances of it being 1:1 pixels are vanishingly-small even on a predictable set of hardware, and in Acrobat or Reader a "100%" scale is supposed to mean "a 210mm wide page is shown 210mm wide" - however as it has no idea of the physical size of the monitor, it's a moot point. It is certainly not the same as "100%" in Photoshop, which means "one photo pixel = one screen pixel".
Instead, if you use a different player widget to embed your videos in Acrobat, you can set the video itself to use 1:1 pixel scaling (provided the screen rectangle is large enough of course). Flash is happy to work with pixels even when the PDF it's living inside is not.

Will retina display support in Photoshop be part of a regular, free update?

Will retina display support in Photoshop be part of a regular, free update or will it be part of a new version upgrade?

Anyone who knows about future release plans will be bound not to tell.
I don't have one, but from what I've read the current version already works with the Retina display - it's just that is uses the high density display pixels in blocks of 2x2 (pixel doubling).
Is this insufficient for your needs? Is your desire just to see prettier fonts and icons, or maybe a bit richer looking document preview?
I was reading something the other day that said the mouse only moves in 2 pixel increments horizontally and vertically anyway on a Mac equipped with a Retina display, so the Apple implementation is not completely like having a double resolution display.
-Noel

How to change external display resolution WITHOUT clicking "CONFIRM"?

I have a somewhat unusual situation. My MacBook laptop is actually now a ModBook (a pen-tablet computer), and as such I no longer have a trackpad attached to it. All of my inputs are via the stylus, tapping directly on the built-in display.
This works perfectly fine, except when I need to give presentations on an LCD projector (which is quite often lately). I like to use the projector as an external monitor, so that I can run the Keynote presentation on it while using my laptop screen as the presenter's display, with the upcoming slide, etc. If the projector doesn't give me an ideal native display option (sometimes, the aspect ratio for the 3 or 4 resolutions available in the Displays drop-down in the menubar turn out to be stretched or squeezed), then I, naturally, have to open the Display System Preferences and try out different resolutions.
The problem is, since my stylus only interacts by clicking directly on the built-in-display, I have no way of moving the cursor over to the external display when the dialog box with the "Click here to confirm change/You have 15 seconds..." message appears. So I can never click it ... so I can never confirm the new settings.
The workarounds I've used so far are:
- Mirror displays (not ideal, as I need the presenter preview of the next slide)
- borrow a mouse from someone (usually from a Windows desktop, frankly) and plug that in to briefly mouse over and click the confirm button
I'd love to find a software workaround that allows me to NOT mirror displays and also doesn't require me to carry around a mouse all the time (my laptop bag is already overstuffed...).
Thanks.

Fateh wrote:
I hope that my question is clear ... Nope.
How to change the display resolution of APEX ??APEX doesn't have a display resolution. "Display resolution" is an attribute of the device and user agent software used to view the APEX page.
What do you mean by "the display resolution of APEX"?
In other word, if an end user sees large elements on a pageWhat "large elements"?
then he/she zooms it outHow?
"Zooms" what—the entire page or a single "large element"?
How can I set a proper ZOOM for my app by default ...Meaning what?
And as usual, we're missing:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
You've been posting here for years. You know this basic information is necessary to understand and reproduce problems.
If you're looking for help it doesn't seem unreasonable that you make the effort to provide a full, clear but concise description of the problem or requirement.

Thinkpad Yoga - Insufficient external display resolution over the Onelink

My local Lenovo Partner just confirmed the data in "User Guide" of the TPYoga, that the external screen resolution will only be 1920x1200.
"User Guide" Page 10, http://www.lenovo.com/shop/americas/content/user_guides/tpyoga_ug_en.pdf
"Display resolution:
– LCD: 1366-by-768 or 1920-by-1080, depending on the model
– External monitor: up to 1920-by-1200, depending on the monitor model"
I mean what do I want the OneLink Dock / OneLink PRO Dock for??
Of cause to connect a large screen and this not with a worse ppi than the intern display. So I need at least 2560x1600
(we don’t even talk about all the disadvantages of a 16:9 screen, cause that’s off topic).
Idealy I expect of cause a 4k resolution possibility together with the OneLink Pro Dock and multi stream (daisy chain) possibility at the display port.
But 1920x1200 external graphic output can’t be meant serious for a 2000US$ device??

Ok, let’s accept that the new Thinkpad YOGA Manual includes misinformation.
Actually I’m sitting in front of my 2048x1152 Display which is connected to my 8 years old Asus Notebook via DVI. Does this old jalopy perform a higher resolution via DVI than the Thinkpad Yoga via “OneLink PRO Dock-DVI” does?
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/options/tp_onelink_pro_dock_ug_en.pdf
Page 13
(I’m guessing in the first line (behind "One monitor") it’s supposed to mean DVI instead of DP”
(1) Lenovo, are these technical details of the NEW OneLink Pro Dock also wrong like the Manual of the Yoga regarding the maximum resolution?
Would be very helpful for me to plan with correct information..
(2) And is it definitely true that I can't connect two displays at the OneLink PRO Dock with a higher resolution than 1920x1200??
That would mean I send the Thinkpad Yoga back and better stay with my 8 years old ASUS jalopy.. smileyfrustrated:

Leopard "Forgets" External Display Resolution

I have a 17" MacBook Pro C2D (Oct 2006 revision) that I use at work with an external display (Dell E197FP) that is connected to the laptop via the DVI-to-VGA adaptor. The Dell has a native display resolution of 1280*1024 @60Hz and this is set via the System Preference's Display panel. The problem is that quite often when I connect the display in the morning OS X (10.5.6, at present) "forgets" the resolution that has been set and reverts back to its default for the display, which is 1152*864 @75Hz. It is baffling to me that it keeps forgetting the selected resolution for the display, despite recognising it, and that it selects such an odd resolution as a default. This happens about once per week at the moment.
Does anyone have an idea what is causing this and how I can stop OS X from being so forgetful?

Are you getting one to extend your desktop? I don't, I use my MacBook with the screen off using my external only with a keyboard and mouse plugged in. I run my Late 2008 2.1GHz MacBook with a GMA X3100 using a 23" Samsung wide ratio no problem in 1680x1050. It is high resolution. Make sure you click "mirror" in Display Prefs. Be certain that you don't simply boot to both because the external will appear grainy and only be putting out the native 1280 X 800 13" MacBook resolution on the new big LCD. There are many different ways to achieve this. With the LCD on and hooked to the MacBook, turn the MacBook on then quickly close lid after the chime. Give it some time. After it boots to the external, I open the lid to provide proper airflow, some may argue it's not needed.

External display resolution

I have Dell up2414q monitor which is capable of displaying up to 3840 x 2160. But when I connect my 11-inch Macbook Air (the latest 2014 model), which is capable of 2560 x 1600, shows only 1920 x 1080. This is the highest resolution listed in display setting.
I'm using Display Port cable and enabled Display Port 1.2 setting on the monitor. I went to Apple Store and asked, but they had no idea what was wrong. My OS is 10.9.3.

Hi there gen2014,
You may find the information in the article below helpful.
OS X Mavericks: Adjust your display resolution
http://support.apple.com/kb/PH14388
You can connect a second display and adjust its resolution. Once it’s connected, click Scaled, then select a resolution. Press the Option key while you click Scaled to see additional resolutions for the second display.
If you continue to experience issues, take a look at the troubleshooting steps in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

External Display resolution problem after resetting PRAM

Gello, I've got Fujitsu-Siemens P19-2 monitor hooked up to my MbookPro and after resetting PRAM the correct display resolution disappeared from the "Displays" menu in System PReferences.
So did the refresh rate option...
What do I do?
I really need to change the refresh rate and the resolution, but the refresh rate button is grey and unclickable, and the resolution simply isn't there (I need 1280x1024).
REsetting PRAM and SMC didn't help.

After a couple of resets everything went back to normal

External display resolution changes after returning from display sleep

I often use an external display as a second screen with my Macbook Pro (OS X 10.8.2) However, when I return to the computer after the display has gone to sleep, the external display resolution changes when the display reappears. Then I have to go into System Preferences > Display and "Detect Displays" in order to return the external display to the proper resolution.
Does anybody know of a way for me to avoid having to do this every time my display sleeps?
Thank you,
Adam

I have the exact same problem.
I found the key combination ⌘ alt F2 also restores the proper resolution on both displays, however it's still a bit annoying

Highest dual display resolution for mac mini mid 2011

I am currently running a mac mini mid 2011. As I've understood (according to the below statement). Am I only able to use 2 secreen with 1920x1200 or could I use one screen with 2560x1600 and one with 1920x1200. I do NOT want mirroring, only dual displays.
I am going to connect the screens in the following way:
1x mini-dvi - HDMI to one screen.
1x HDMI - HDMI to the other screen.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapterand 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Thanks in advance
Rich

According to the copy&paste from wikipedia, HDMI should support higher resolution than 1920x1200. So the question is, does it aupport that on the mid 2011 mac mini. It says in the specifications
"Mac mini is designed to work with HDMI devices that comply with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification."
That should mean it should be able to support it, but I don't know : <
HDMI version
1.0
1.1
1.2
1.3
1.4
2.0
Date initially released
December 9, 2002
May 20, 2004
August 8, 2005
June 22, 2006
May 28, 2009
September 12, 2013
Maximum clock rate (MHz)
165
165
165
340
340[109]
600
Maximum TMDS throughput per channel (Gbit/s) including 8b/10b overhead
1.65
1.65
1.65
3.40
3.40
6
Maximum total TMDS throughput (Gbit/s) including 8b/10b overhead
4.95
4.95
4.95
10.2
10.2
18
Maximum throughput (Gbit/s) with 8b/10b overhead removed
3.96
3.96
3.96
8.16
8.16
14.4
Maximum audio throughput (Mbit/s)
36.86
36.86
36.86
36.86
36.86
Maximum color depth (bit/px)
24
24
24
48[a]
48
Maximum resolution over single link at 24-bit/px[b]
1920×1200p60
1920×1200p60
1920×1200p60
2560×1600p75
4096×2160p24
4096×2160p60
Maximum resolution over single link at 30-bit/px[c]
N/A
N/A
N/A
2560×1600p60
4096×2160p24
Maximum resolution over single link at 36-bit/px[d]
N/A
N/A
N/A
1920×1200p75
4096×2160p24
Maximum resolution over single link at 48-bit/px[e]
N/A
N/A
N/A
1920×1200p60
1920×1200p60
Maximum 3D resolution (using a full resolution 3D format) over single link at 24-bit/px
N/A
N/A
N/A
N/A
1920×1200p60

Cannot set display resolution after upgrading to Mavericks

I have early Mac Mini connected to KVM stitch. Over the weekend I upgraded to Mavericks and it "dowgraded" display resolution from 1920x1200 to 1600x1200 and everythign looks streached. 1920x1200 no longer shows on the list in display properties (1920x1440 shows but it does not look good on my screen). I googled Option key trick and hitting "Scaled" while hold Option key does show some additional resolutions, but not the one I used to have.
Connecting Mac directly to the monitor allowed me to set proper resolution and after removing monitor and pluging mac back into KVM things "held" untill Mac goes to sleep or until reboots.
I am aware that my KVM switch does not communicate EDID but things did work just fine before upgrade to Mavericks.

Hello curtdav,
It sounds like you are getting a graphical anomoly when unplugging an external monitor. I recommend these troubleshooting steps from the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

I am unable to play a downloaded HD movie from iTunes. SD movies play OK. An error popped up saying something about the display not suitable for HD movies but now all I get is a blank window. I have tried changing the display resolution to no avail.

I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
Can anyone help me resolve this problem?

Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.

Windows 7 display resolution problem on iMac 27"

Hi, I have an iMac 27" that is running bootcamp with Windows 7. The resolution on the OS X is fine, but on the Windows 7 side, it is messed up. The display resolution choices make the screen look all stretched and weird; I cannot select the same resolution as I have on the OSX side. The display drivers say that they are generic, so I tried installing manufactuer's drivers. That did not work since they couldn't detect the correct monitor. I've run software update on he Mac OSX side, but to no avail. Does anyone know how to fix this? Thanks!

updates for osx will not affect windows
in osx one can make a packet with all drivers required for bootcamp windows do that
and if you need drivers for windows download the mobile version what amd/ati and nvidia call desktop videocards
are not the type used in imacs they use the laptop versions

Mice / display resolution in photoshop

Similar Messages

Maybe you are looking for