Micophone not working, at least there is no recording of sound. How do I test?

My computer is a Pavilion dv9000

Hi,
For Microphone issue:
Perform the following three methods to troubleshoot this issue and verify if the issue is resolved.
Method 1. recording Troubleshooter:
Open the Record Sound troubleshooter by clicking the Start button , and then clicking Control Panel. In the search box, type troubleshooter, and then click Troubleshooting. Under Hardware and Sound, click Troubleshoot audio recording.‌  If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Follow the link below for additional assistance:
http://windows.microsoft.com/en-US/windows7/Open-the-Recording-Audio-troubleshooter
Method 2. Set Microsophone as Default:
Perform the task mentioned below to set Microphone as default:
1. Go to Start and click on control Panel.
2. Click in Sound, then a new window will open up.
3. In the new windows click on the tab "Recording" and right click in the window and click on Show Disabled devices.
4. Now check if Microphone is listed there and right click on it and choose enable.
5. Highlight that Microphone  and click on "Set as Default"
Method 3 :Try updating the sound drivers:
To update your Audio driver:  
1.   Click Start, and then click Control Panel
2.   Click System and Maintenance
3.   Underneath Device Manager, click View hardware and devices
If you are prompted for an administrator password or confirmation, type your password or click Continue
4.   Expand Sound, video and game controllers
5.   Right-click your Audio controller, and click Properties
6.   Select the Driver tab
7.   Click the Update Driver button.
8.   Select Search automatically for updated driver software
Source: Microsoft forums
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

    F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
    F8 option turned on in the boot image.
    F8 debug window works in Windows PE.
    F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
    But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
    F8 debug screen is open in the background.
    I am using SCCM 2012 SP1 (CU 1 is
    not an option at the moment).
    Any ideas as to how I could get the debug F8 option back?

    There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
    Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
    Jason | http://blog.configmgrftw.com

  • My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
    http://www.apple.com/retail/geniusbar/

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • The greeting button on my iPhone 4S is not working it is there but i can't press it why is that?

    The greeting button on my iPhone 4S is not working it is there but it is grayed out I am trying to change my greeting from personal to the default one how to I fix this?

    I have a similar issue I could use help with.  I just upgraded to a iPhone 4S and received my new phone but there is no Greeting buttong at all.  When I go to the phone icon, then the voicemail icon the voicemail icon automatially dials an A.T.& T voicemail number  - there is no Greetings on the top lefthand corner.  My cousin has the same phone and she has Greetings typed at the top of her voicemail page and she can click on it and then there is a place to leave a voice mail message.  The upshot is, I have no outgoing message and  nothing for people to hear and no way for people to leave messages.  Any suggestions?

  • Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

    Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

    I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
    I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
    Still am curious about the memory usage, though.

  • Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

    Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

    Hi SAP Gurus
    I need a big favour, I am trying to map serach string with internal order, my search string is MV-38610573 which I have mapped with posting rule 'GENT' which  debits bank account and credit revanue accounts but this revanue account requires assignment with internal order, so I have created another 3 search string with same search string 'MV-38610573' and mapped with BSEG-ASUFNR,60000LC ( internal order),3 (bdc account type) respectively, also maintained three entries in search string use which is for BDC FIELD NAME1, BDC FIELD VALUE 1 & BDC ACCOUNT TYPE 1,
    But this is not working it gives me following error,                                                                 
    > Error: (KI 235) Account 4421 requires an assignment to a CO object
    Your help will be highly appreciated,

  • I want  to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive  is not working. Is there the possibility to buy an online Update?

    I want  to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive  is not working. Is there the possibility to buy an online Update?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    If your hardware supports more recent versions then:
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Option of 'Restore Last Session' not working. Is there any option to repair the 'Mozilla Firefox' without loosing History?

    Option of 'Restore Last Session' not working. Is there any option to repair the 'Mozilla Firefox' without loosing History?

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js

  • I have a 2010 mac book pro and track pad is not working well, is there a problem with that year?

    I have a 2010 mac book pro and track pad is not working well, is there a problem with that year. I heard that the 2011's had track pad trouble.

    All recent versions of Mac OS X use bash, so avoiding Mavericks won't help you with that problem (which isn't a problem for most users).
    iWeb is another matter. My advise: migrate your website to Wordpress first and start thinking about upgrades later.

  • My iPad would not complete the back up to iCloud.  The solution re: resetting my iPad did not work.  Are there any other ideas?

    My iPad would not complete the back up to iCloud.  The suggestion re: resetting the iPad did not work.  Are there any other ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

    I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

    Thanks for replying (thorvsphoenix)
    The windex was sprayed on the cloth, not the keyboard. And only one or two pumps on a hand towel. No liquid seeped between the keys the towel was barely damp. You are saying the ammonia gas created the problem?
    I think It was more an issue of multiple keys being depressed at the same time that screwed up the configuration. That is why I need to "reboot" the keyboard.

  • Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button.
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
       If it doesn’t quit, Force Quit it.
       Press command + option + esc keys together at the same time. Wait.
       When Force Quit window appears, select the application if not already.
       Press Force Quit button at the bottom of the window. Wait.
       Application will quit.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app.  Also, deleting old texts can free up some room.

Maybe you are looking for

  • How do I edit a table cell value in the same view?

    This is probably just a clarification more than a question, but when looking at the iPhone->Settings->Mail,Contacts,Calenders view. If you select a mail account, you are taken to the account edit view where you can edit your account information. In t

  • Custom tags & re-creating jar file

    Question from a novice! How, when I have made changes to a custom tag library tld file, do I get the deployment JAR file to re-zip the new files? The ones in that I have in the JAR file are out of date compared with the new files that I have edited a

  • No status LED - it's like a dead device

    Hello, i want to use my old AirPort Express (one of the old ones with no power cable) again. The orange LED shows (not blinking) while the station boots, but after a minute or so the LED turnes off. I tried a hardware reset (holding the reset button

  • Serial attribute and org attribute problems with item master

    IF i want to unassign an item from an org, how would i do tht The check is not updateable in the organization assignment tab Secondly: When i try to make an existing item serial controlled, i go to inventory tab on item master and when i change the s

  • Hierarchy BEx analyzer

    Hi people, I'm using BEx analyzer, and I need to expand a hierarchy in my report, but when I double click in the nodle, doesn't appear any information. It only appears if I filter manually in the filter box. For example: in report there is "People's