MICR Font problem in spool

Hi, We are printing checks on MICR printer. In the botom of the check
we had check number, bank routing number, bank account number, these
are comming perfectly with MICR font when print online.
But if i create a spoll by using same printer, and print the spool
request to the MICR printer, MICR fonts are not effective. I just see
Check number, bank routing number and account number in regular font.
Can you please see if i need to go with some oss note or something.
By the way iam on 4.6C.

Hi,
Does your printer have a MICR font DIMM installed? Do you use one of the printers and device types described in SAP note #94233?
Regards,
Aidan

Similar Messages

MICR font problem for check printing in ECC6

Hi All,
I am working of the re-deployment project. Here we are just migrating the objects from 4.6c to ECC6. I am facing the problem with SAP Script for check printing. It is working fine in 4.6c,but it is not working fine in ECC.
We are using HP 8150 printer with TROY magnetic chip and toner. It is working fine for 4.6C, but not for ECC6.
We are using "A" character for "Transit" and "C" character for "On as" in SAP Script. But during printing preview time it is not formatting it in MICR font.
I am working with basis team for font code page 4004. I came to know, it is showing character set in 4.6c with spool administrator tab character set, but this tab page does not showing any character set.
But according basis team, it is existing in ECC. If we will check through SCP it is showing unicode converted code page.
In 4.6c we are using Zee printer driver with Zee family fonts(ZMICR and ZSIGN) but in ECC we are using MICR_E(SAP provided MICR font) in TROY provided printer driver.
I have also come through the SAP note 94233 for MICR printing.
Same problem we are facing with digital signatures. It is not converting digital signature in graphical signature at MICR printer level.
Any help would be appreciated...........!
Thanks
Sharanjit Singh

HI,
Copy the file into Desktop.(font file is available in your local drive: C:\WINDOWS\Fonts
Copy Arial file into ur desktop or some other location other than windows, and upload it.
it will work, i did the same.
Regards
Aeda

XML Pub v. 5.0.0 Micr Font problems

Hello--
I am trying to get MICR font output from XML Pub 5.0.0 for AP checks on Oracle 11.5.10. The MICR is not processing correctly--it is just showing up as a regular font. We have uploaded an xdo.cfg file to the location /test_sysdict/apps/appltest/xdo/11.5.0/resource and the font is located at /test_sysdict/apps/appltest/xdo/11.5.0/resource/fonts/MICR.ttf.
My settings in Word properties are as follows currently:
Name: xdo-font.MICR.normal.normal
Type: Text
Value: /test_sysdict/apps/appltest/xdo/11.5.0/resource/fonts/MICR.ttf
I have also tried the following:
Name: xdo-font family="MICR" style="normal" weight="normal"
Type:Text
Value: truetype path="/test_sysdict/apps/appltest/xdo/11.5.0/resource/fonts/MICR.ttf"
My config file reads as follows:
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
<properties>
<property name="system-temp-dir">/tmp</property>
</properties>
<fonts>
<font family="MICR" style="normal" weight="normal">
<truetype path="fonts/MICR.ttf"/>
</font>
</fonts>
</config>
Can anyone spot something that I am doing wrong that would prevent the font from working? I know that the report recognizes the cfg file because we've applied and then unapplied some security settings successfully using the cfg file. I've been scouring the forum and tried quite a few things but haven't gotten it to work yet.
Any help at all would be appreciated.
thanks!
Kate

hi....i am struggling with the E-13B MICR fonts..Please advice how you have fixed ur problem..mine is similar to it.
I have installed the MICR (E-13B) font on my client machine.
It exists in ‘C:\Windows\Fonts\E-13B’ , I have also put it in ‘C:\Program Files (x86)\Java\jre6\lib\fonts\E-13B’ &
‘C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts’
In my RTF template I am able to see the font ‘E-13B’, BUT when I do a preview in PDF it is not showing up in MICR font.
The fields supposed to appear in MICR font appear in normal (Arial / Times New Roman) Format.
Whereas if I do an preview in RTF the fields appear as expected in MICR font itself. So I am assuming there must be something that we have to do with the PDF fonts as well.
I have also tried to modify the config file in ‘C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdo.cfg’.
When I modify this file and added the following lines
<font family="E-13B" style="normal" weight="normal">
<truetype path="C:\Windows\Fonts\E-13B.ttf" />
</font>
My preview from RTF fails with the following error
Caused by: java.io.IOException: The system cannot find the path specified
at java.io.WinNTFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(Unknown Source)
at java.io.File.createTempFile(Unknown Source)
at oracle.xdo.common.tmp.TmpFile.createTmpFile(TmpFile.java:85)
at oracle.xdo.template.FOProcessor.getTmpFOFile(FOProcessor.java:1998)
... 5 more
Please advise on how to proceed further. How did you get it running for yourself.

MICR font in Adobe Form

Hi All,
I am working on Adobe Form for A/P Check(Cheque) through F110 transaction. In Adobe Live cycle Designer(and in ADS), I don't see MICR font option in the list of available fonts. I know it's there in smartforms and Scripts. But how can I get the font in Adobe?
I already searched in the forum but didn't get any solution. I appreciate any help in resolving this issue.
Thanks!

I found these 2 threads (ADS Font Installation and Fonts problem) which say that you might add your font in designer.xdc or design.xdc file in \usr\sap\<systemid>\SYS\global\AdobeDocumentServices\lib\, and for windows, you may install in /winnt/fonts
There is also some [documentation for XDC fonts in Adobe support website|http://livedocs.adobe.com/livecycle/8.2/wb_help/wwhelp/wwhimpl/js/html/wwhelp.htm?href=001172.html]
For moving your thread, just click the abuse button just to contact the moderators and ask them to move the thread. Another solution is to close this thread, post a new question in the other forum with a link to this thread.

Cheque printing using MICR fonts on HP P3005n series

Hi,
I am doing a HCM implementation on ERP 6.0 ehp3 server. We need to print cheques using the MICR fonts on HP P3005n printer.
I found that MICR_C and MICR_E fonts are already installed in the system. But when we try to print, the MICR characters are not getting printed.
I have tried with different device types like TROYMICR, HPLJMI, HP5MI, ZHPP3005 but no luck. The printer uses the toner MICR-THN-51A
Where could be the problem? Do i need to do some more configuration in SAP or is printer needs to be configured?
Please help me as we are in testing phase and as the cheques are not printed we are stuck.
Is it necessary to use TROY or Jetmobile printer to print MICR characters?
Your inputs will be highly appreciated.
Thanks

Hi Naithan,
If you are facing this problem pls install HP default printer in SAP. I hope you will not getting this problem.
Can you tell me the cheque prining setting in DMP printer or Laser printer. Please check this with your abaper programmer. If setting in DMP then you have to use DMP printer.
Regards,
Anil

Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?

Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
Using 10.6.8 on MacBook Pro
Mikeaaa

I am running Snow Leopard. Transferring the same texts to TextEdit has no problems, so this is a Pages problem, I think. Corruption of Times New Roman and Arial fonts, I suspect, but where? and what do I do about it? I just need to be pointed to a source of advice, I think.
Thanks
Mikeaaa

Glitches in address fill-ins with nicknames; default font problem; plus other glitches in Thunderbird 31.3.0 and 31.4.0; can I roll back to an earlier version?

I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.

Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again!

10.6.8 combo & 10.6.7 pdf fonts problem

Does the 10.6.8 update combo correct the pdf fonts problem that was inherent to 10.6.7? After a couple days of stress I had to do the lengthy 10.6.7 uninstall process in order to refine my doctoral dissertation. This has made me gun-shy & fearful of updates. Is it safe to update now?

The combo should fix your problem. As always have a back-up in case you have to revert.
The Font update came out to fix the problem in 10.6.7
http://support.apple.com/kb/DL1377
It should be rolled into the Combo-Update:
http://support.apple.com/kb/DL1399

How to use MICR fonts in Adobe forms (webdynpro java

Hi,
We have a requirement where we need to print some MICR codes (for checks) through Adobe Forms.
I have installed some true type MICR fonts in windows and Adobe Font Manager (in ADS) as well.
It is visible in the Adobe Form design time (Font palette) and when I use the font for text, it is visible in preview too. But when I run the web dynpro application, in the online form it is converted into Standard font (Times new Roman).
Is there anyway to handle this issue.
Please let me know.
I am using NWDS 7.0.1
Adobe Live cycle designer 7.1
SAP NW 2004s SP14
Thank you,
Vasu

Check this forum post (though that is for 6i, it would be of helpful for you)
How to use unicode fonts in Oracle forms 10g?
-Arun

HT1338 Font Problems with Snow Leopard

I'm having font problems after updating to Snow Leopard. It seems to have problems with spacing the fonts properly and reading some fonts properly in Page and Keynote. Any suggestions of how to fix it?

Dear Kurt,
in bigger companies thinks come slow :-) Actually we are switching from 10.4.11 with Quark 6.52 and FontReserve to 10.6.8 with Adobe CS5 and FontBook.
And as you may guess we're running directly into the HelveticaNeue problem.
We cleaned up the system fonts so that only the absolutly needed are in /Sys/Lib/Fonts/ and all other fonts (from MacOS and our own) are in /Lib/Fonts/ where they are in folders for better handling.
The number of additional fonts were radically stripped down to the REALLY needed (about 70 fonts with their families).
We removed the protected fonts and replaced Helvetica, HelveticaNeue, Times, Symbol and ZapfDingbats with PS Type1 fonts.
Our goal was to have no font conflicts to keep our users save. In addition we put fonts in predefinded collections to switch them on/off with an AppleScript that picks the collection name.
And from here it went fancy: The Apple apps are working fine but external app like Adobe CS5 and MS Office only see the fonts in /Sys/Lib/Fonts/.
When we put the HelveticaNeue.dfont back (no matter if it's in the system or at ~/Lib/Fonts/) the other apps also get all installed fonts. We found out that this works even if the HelveticaNeue.dfont is deactivated.
Unfortunately this brings up two problems:
The HelveticaNeue.dfont can't be put to a font collection without taking the corresponding font from the Type1 font with it, so it's more difficult to handle with the AppleScript (we have to pick the exact single name).
The second is that if something goes wrong and all fonts are switched to active we have a font conflict and the possibility that the dfont is used in documents.
I think I have read all (ok, many :-) of your posts about the Helvetica problem in 10.6 as well as your really great document about font handling in OS X.
But I wasn't able to get it to work.
Do you have the one big hint for me???
Thanks and best regards... Udo

Change Font size in Spool request

Hi,
Report output list is generated in spool.
used GET_PRINT_PARAMETERS and write statements.
The requirment is to increase the font size in spool.
Please let me know how can i approch regarding this.
Thanks & Regards,
Padmaja.

Hi ,
Font size in spool request can't be changed . It can be changed while printing using format settings .
I Hope u will got my point.
Regards,
Anish

Problem in spooling a file

Hello ,
I am having some problem in spooling a file i am using a single script that connect to different user to fetch a data i am using html to spool a file.
whenever it connect to different user it show message "connected " in spool file .
Is their any method to remove this message coming in spool file .
with regards
Vinesh

I am using oracle 9i it is not working there .
Command which i am using is given below.
set markup html on;
spool on;
set feed off;
spool C:\Temp\vinesh.xls;
select EMPLOYEE_ID,FIRST_NAME from employees
where rownum<2;
set markup html off ;
spool off;
conn dotsoft/abcd1212@dot
set markup html on;
spool on;
set feed off;
spool C:\Temp\vinesh.xls APPEND;
select unique_id_no EMPLOYEE_ID,customer_name FIRST_NAME
from working_lines where rownum<2;
set markup html off ;
spool off;
it is only working for 1st connection showing error for 2nd connection.
with regards
Vinesh Gupta

PDF and Font Problems 10.6.8

Ugh.
MBP13 7,1 (mid 2010) 2.4g C2D 4G Ram
I use Vectorworks 2011 to produce CAD drawings for customers and the plant. Recently I began having issues with my PDFs of my CAD not being fully distilled - various issues but primarily most dimensions not visible. I have read that PDF issues cropped up beginning with 10.6.7 and that certain PS fonts can be the issue. As well as outdated PDF readers used by my recipients. In a short-sighted fit of frustration I began monkeying with Font Book and Font Caches.
My maladies are
1. My PDFs are incomplete
2. Received MS Office filed open "blank". Now MS OFFICE 2011 no longer has common Fonts such as Arial and Times Nee Roman.
Can I fix this or do I need to go back to 10.6.6 and reinstall Office?
Thanks in advance.
BTW this forum is surprising difficult to nav on an iPhone.

MS Office font Problem solved in case anyone else stumbles upon this.
http://hints.macworld.com/article.php?story=20110810001909244

Font problem in Classic

I posted this over in the Classic forum...but it's rather dead over there and I fear it may not be seen for a while...so here's the problem...
I'm running Quark 4 in Classic and having trouble with fonts. Though the fonts are on my computer, and in the OS 9 fonts folder, they won't print correctly. If I use the same printer and print from Quark on my old iMac (running OS 9) the fonts print and look fine.
I read another thread in this forum that mentioned the fonts must be OS 9 fonts (and must not have been run through suitcase or a similar managing program???). So, on the off chance that my husband or I just took OS X fonts and copied into the OS 9 folder, I copied the OS 9 fonts from the iMac (I just grabbed everything in the Frutiger family, as it was one that I had an issue with) and then dumped them into the OS 9 fonts folder on my iBook. I restarted Classic mode in order to make the fonts available to the OS and then printed again. The font still prints all pixeled-looking.
Can anyone tell me what I'm doing wrong? Do I need to find the original font disc and install them from the disc?
Any help would be most appreciated!!!!!

Hi Diane,
Glad that the tip helped to "solve" the font problem!
Not sure why you are printing the file info at the bottom of the page. It does sound as if it is a print setting somewhere though. Hopefully someone has a clue for you.
Again, thanks for the "solved" star and if I can think of something else for you to try I'll post back. Let us know if you figure it out.
good luck,
littleshoulders
edit:
"In lieu of an answer...I tried changing the paper size to legal and it's not on the last copy I printed."
Ooops, I misread your reply, and see that by changing the paper size it corrected the issue.
Message was edited by: littleshoulders

MICR font not displayed in PDF on SUSE Linux Server for Check Writer (XML)

We are generating checks by running the Check Writer(XML) concurrent request and are not able to see MICR fonts on the Check. We downloaded the free version from IDAutomationSMICR.ttf and the fonts were registered under /usr/local/fonts/micr directory. I registered in APPS and uploaded the file IDAutomationSMICR.ttf. Am I missing any steps. The DBA's have registered the fonts under /usr/local/fonts/micr on SUSE Linux Server . The custom Checks are generated but no luck with the fonts. Please advise. Can I download MICR fonts other than IDAutomation site? Appreciate your response.
Thanks,
Hari

I use version 11i, so the steps are probably different. Download a font file (gnuMICR for me). Extract it to a location of your choice on your operating system.
Follow these steps to load the MICR font to the server. (Step 11 was missing in some of the metalink documents in late 2007. I think Jan. 2008 will be OK).
1.     Log in as XML Publisher Administrator.
2.     Navigate to Administration->Font Files->Create Font File.
3.     Fields are Font Name and File. For Font Name choose any descriptive name. File will browse your PC to locate the font file.
4.     Navigate to Font Mappings->Create Font Mapping Set.
5.     Mapping name is the name you will give to a set of fonts. [MICR Font]
6.     Mapping code is the internal name you will give to this set. [MICR]
7.     Type: 'PDF Form' for PDF templates. 'FO to PDF' for all other template types.
8.     Create Font Mapping (this allows you to add multiple fonts to a set).
9.     Font Family is the exact same name you see in Word under Fonts. If you don't use the same name the font will not be picked up at runtime. [GnuMICR]
10.     Style and weight must also match how you use the font in Windows. Normal and Normal are good defaults. [Normal, Normal]
11.     DO NOT enter Language or Territory
12.     Choose a value for Font Type. [Truetype]
13.     Search for the Font you just created in step 3. [GnuMICR]
14.     Navigate to Configuration -> FO Processing -> Font Mapping Set. Can also be done at data def and template level under Edit Configuration. Hierarchy is Site-> Data Def -> Template.
15.     Select your new mapping set.
16.     Make sure the font is not referenced under File->Properties->Custom in the RTF template file.
17.     Select a temporary directory on your concurrent processing node (Configuration -> General). This needs to be a private area not shared by other processes, read writeable by the applmgr (owner of the $APPL_TOP file system). It should be fairly large 5 GB or 20x larger than any datafile being used. The fonts will be downloaded here the first time they are used.
18.     Also at this site level select your font mapping set.
19.     Upload a template that uses your special font and test using preview.

MICR Font problem in spool

Similar Messages

Maybe you are looking for