Micro Battery flatlined TWICE...any ideas about w
here's the story. had a fully charged battery, listened for about 2 hours, had 3 bars when i turned it off, let it sit overnight, turned it on the next day...NO BARS! almost completely dead. ok, weird, so i recharged it. the next day, used it for about /2 hours, turned it off, next day TOTALLY DEAD. no bars, couldn't turn it on. it's now charging again. i've never had any problems with this micro before.
here are some of the specs
i'm using the BETA firmware 2..
listening to 28k mp3s at volume about 8, no backlight
normal operating temperatures (no extremes)
it's never done this sort of thing before and now it's done it TWICE in 2 days and i'm weirded out. any ideas?
This is more or less what happened to me two weeks ago. Had the Micro for a month without any problems, then the battery went to hell. I called Creative and they all but admitted that the battery power on these gets drained even when the unit is not in use. Here's the only solution .. what I've been doing is after I use the Micro, I remove the battery. I still carry my unit around in the little black pouch that came with it, but so if you remove the battery and just keep it in the pouch with the player, it's not a problem. Just slip it back in when you want to use it and your battery will be exactly where it was when you last used it.
Your welcome. :smileytongue:
Similar Messages
-
hi,
i have heard that charging less than 80 percent will make the battery lasts longer, does anybody have any idea about that to help me?I don't know where you heard that statement but it's completely incorrect.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
TS1412 any ideas about how to fix an iPod Nano with a white screen??
any ideas about how to fix an iPod Nano with a white screen??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
Any idea about the pricing of the hardwares for Oracle 10g RAC?
Hi,
If I go for 2 nodes RAC using Dell servers and Disk array, any ideas about the prices? (just for the hardwares.)
Thanks.
Regards,
JasonIt's all about the shared disk(s).
If you are only ever going to use two (2) nodes a SCSI JBOD solution is cheap. (practical too with ASM as the cluster filesystem / volume manager)
More than 2 nodes, you step up to certified NFS, iSCSI or FC/AL connected storage. More expensive, faster, more flexible.
The computers are the cheapest portion of the cost especially with multiple core multiple cpu 64bit linux based servers being so inexpensive. -
Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?
Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?
Hi,
Please give this a try: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Thanks,
Rameez -
Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?
What are you trying to sync?
I see you are on ios 7.
I also had upgraded my iPad Mini to ios 7 & then the 1st time I tried to open a Numbers file that was set up to sync w my MacBookPro, I got a warning that I would not be able to sync it any more w my Mac until I upgraded to Mavericks.
So if you are trying to sync Numbers, Pages or Keynote files between your iPad mini in ios 7 and a Mac that hasn't been upgraded to Mavericks that could be the problem.
I was very shocked to get that message since I bought Numbers on the iPad so that I could have a particular file on both devices & keep them synced. I had no clue when I upgraded to ios 7 on the iPad Mini that it would make it so the files in the iWorks apps woudln't sync any more.
So I finally decided to go ahead & upgrade to Mavericks after carefully preparing & updating other software so that it would work w Mavericks. But I got error messages so haven't even been able to download Mavericks & now having 2nd thoughts about doing so.
iPad mini ios 7
MacBookPro Mid 2012 Mountain Lion
iphone 4S ios 6 -
My Ipad screen is blank except for the service and battery symbols. Any ideas how I can fix this please?
Try restarting
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost). -
Any Ideas about 1.2 fix? (Scrambled Screen, etc.)
Anyone have any ideas about how to fix the problems with ipod software 1.2? Does anyone know how to fix the scrambled screen problem or the locking up of the screen, after two months of having to deal with the problem) (iPod software version 1.2 was released on September 12) (other than reverting back to 1.1.2)
...yeah, i didn't think so.yeah, many of us would like apple to fix this problem. I've stopped buying tv shows off the iTunes store, because I can't get the videos on my iPod without the update. Feh!
-
After updating to Maverick, Photoshop cs6 is freezing up repetitively. Does anybody have any ideas about why this is happening?
After updating to Maverick, Photoshop cs6 is freezing up repetitively. Does anybody have any ideas about why this is happening?
-
When i tried to purchase a movie, My Apple TV said it would take 11 hours to load. Any ideas about what to do or what is going on with that?
It always has a very high number at the beginning, but it never takes that long....
However, it can take several hours....I've found this to be true on any device or computer I've downloaded movies or tv shows on - Mac, PC, iPad, Kindle Fire....you name it.
However, even if it does take a long time, that does not prevent you from starting to watch it as soon as it has done a little downloading. Here is the Apple link for typical download times:
http://support.apple.com/kb/HT1577
Here is a link with Purchased Movie FAQs:
http://support.apple.com/kb/ht1906#faq24
Cheers,
GB -
After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
HT201210 dose someone has any idea about error 1015 when trying to restore iphone iOS?
Dose someone has any idea about error 1015 when trying to restore iphone iOS?
Error 1015 means the phone was jailbroken. You can not get help here.
-
Any idea about 8.0.5 desupport?
Any idea about Oracle 8.0.5 desupport?
I understand the earliest supported db version is 8.1.7 so not much hope for 8.0.5 then.
Maybe you are looking for
-
CRM 7.0 in partner determination procedure
Dear all, In CRM 7.0 in partner determination procedure for an ITEM level am unable to set up procedure so that any partner will always be just mirror of the partner set on HEADER level. This functionality works only when the new order is created, th
-
Dropship Process - Account assigned PO with Freight
Hi Experts Scenario - We have a process defined for third-party drop ship with PO Account assigned to 'Y - 3rd Party W/O SN' and to a GL account based on this account assignment. We have an automatic price determination for a condition type for 'Dro
-
Most efficient way to consume log files
Hello everyone, I've been absent from the forums for awhile but I'm back at it now... I have a question about the most efficient way to consume log files. I read in Powershell in action, by Bruce Payette that using a switch statement with a regex w
-
Failover Cluster events through email
Team, I'm trying to get Windows Server 2008 Failover clustering events through email. I don't see "Attach a task" option in Clustering events. Could anybody suggest how to accomplish it. Please note down we have a 4 node cluster and would like to r
-
How to avoid duplicated rows using the outer join
Hi everybody, I have the following query: select a.usr_login, b.ugp_rolename, b.ugp_display_name from (select usr.usr_login, usr.usr_key, usg.ugp_key from usr,usg where usg.usr_key = usr.usr_key and usr.usr_login IN ('C01015','C01208')) a, (select ug