Micro cd installation prob

i just got a zen micro. i'm having difficulty installing the software. when i run the cd, it wont install. i get a message saying "demoplayer shield error", then it says the software needs to close down. is the problem a missing file on my computer or do i have a bad cd? any help would be appreciated. thanks

You can try downloading each individual piece of software required from the download page instead. You need the following:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
Install . then connect the player to the PC. Then install 2 (which needs the player connected for verification) followed by 3.
You can also download Zen Micro Media Explorer as well.

Similar Messages

Zen micro cd installation prob

hi i recently purchased a zen micro. when i try to install the software from the cd i pick the region and the language and then an error comes up saying the "demoshield player has encountered a problem and needs to close". this happens evry time and i have tried it on 2 differernt computers. has anyone experienced this and how did you fix it's

You can try downloading each individual piece of software required from the download page instead. You need the following:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
Install . then connect the player to the PC. Then install 2 (which needs the player connected for verification) followed by 3.
You can also download Zen Micro Media Explorer as well.

Zen Micro Installation Prob

I just bought my green micro today and I tried to install it, but it didn't work. Everything went well until the actual installation part where I got numerous popups saying that _____ could not be registered. The only option I had was to press okay. After I just kept pressing okay (there were tons of these pops), the installation reached 00%. When I connected my micro, my computer did not recognize it and I could not open any of the programs installed. Please help! I have all the system requirements but it still doesn't work.
Thanks for your time!Message Edited by maddmagg on 0-22-2005 0:43 PM

Any help would be appreciated

Zen Micro - Lost Installation CD: Please H

Hi All,?I have a Zen Micro from 2005. I recently reformatted my hard dri've and I no longer have the installation CD for the program. I saw alot of threads out there like this but I didnt see one for the Zen Micro (I know, its 2 years old). Anyway, I went to the download application page and there just seems to be alot of files to choose from. Can someone with knowledge of this subject please specifify exactly which files I need to download and install, and it what order, so that I can get back up and running normally again ? Thank you. Note: I did have WMP but installed it a/p a stuck thread. My comp now does recognize a Zen Micro?- its just looking for software for it - thanks again

^what firmware is your Zen Micro loaded with?
I use ..0 since I don't need it for subscription services or PlaysForSure.
As for software, I use Zen Micro Explorer Web Update to organize my ZM and Creative Zen and Jukebox Driver Upgrade version .30.03
I don't use Creative MediaSource Player/Organizer, I find Zen Micro Explorer easier to use.
It's been a long time since I installed my Zen Micro on this computer, but if I remember correctly you install the software first and then connect the Zen Micro.
Mine has never given me trouble, so I'm not much help at trouble-shooting them. :|

Oracle 8i Post Installation Prob..

Respected members
I succesfully installed Oracle8i on linux
(redhat linux 6.1) . Everything is ok and got a succesfull installation message.
After it i set Path and everything but
but getting listner not available or sometime oracle not available message message
i try to solve prob but still not responding
any one suggest me some idea . i use tcp/ip
protocol and i have enough hardware resource required for oracle 8i installation
Thanking you
Piyush Patel
null

I am having the same problem with my resources.ora as empty.
PLEASE SEND me the content that should go into this file. I need
it to start my OMS service.
my email id is [email protected]

Win 7 installation probs

Info, first.
Toshiba Satellite L775-S7114 (big box v. of L775-S7111). Win 7 installed.
Now, onto the history (condensed version):
Had HDD probs (laptop kept shutting down out of the blue). Tried to restore HDD to factory defaults (on board recovery). During recovery laptop shut down. Started getting "bootmgr.exe missing. Press Ctrl+Alt+Del to restart." Would restart in HDD recovery mode and continued getting same message.
Ordered the recovery media from Toshiba. Didn't work until I installed Win 8 (free OS only version from MS with purchase of this laptop), then used recovery media to factory default back to Win 7. But found out prob was a bad fan. Fan replaced. Found out, then, bad sector on HDD. Bought new HDD from Toshiba (correct P/N for this model). Installed....
Now the bigger picture/problem:
New HDD will not install either OS. Win 7 (recovery media) or Win 8 (OS only). Been trying for months now.... all kinds of workarounds and tricks I can find/think of to get it to install. Been on the phone with Toshiba support toooooo many times with ZERO help or satisfaction. Sooooooo....
Got a wild idea and curious if someone can help me figure out how to do it. Was thinking that if I can connect the new HDD externally to the laptop, that I can somehow manage to install Win 7 (recovery media) to it. Hell, I'll even accept Win 8 (OS only) installation, because I can then install Win 7 in it's place.
I may not be relating this thought in a clear way to the forum, so I'll explain further. Currently the bad HDD is working on this laptop, albeit in a very limited fashion. Every so often it dies, and I have to use the onboard HDD recovery to get it back to running. I would like to externally connect the new HDD (correct one for this laptop model) to this laptop, use the CD-ROM drive to transfer the Win 7 (recovery media), or the Win 8 (OS only) to the new HDD "THROUGH" this laptops CD-ROM drive.
Can this be done? Or would I have to transfer all the data from the Win 7 recovery media disks -or- the Win 8 OS only disc to a USB to transfer it? I'm really not sure how to accomplish this task. But, I am at wits end, as I have sunk a TON of money into trying to repair/rework this laptop (I really like it) to no avail. I can't find a new laptop with the features this one has for anywhere near a reasonable price.
Any help will be greatly appreciated.
All my best to the forum, and thanx in advance.
Nawlins Jeaux

After holding down the option key after starting up, I tried EFI Boot, and the machine just booted into Mac OS X. I restarted again, and I selected Windows from the Win 7 DVD. After whirring a bit, a black screen said the following:
1.
2.
Select CD-ROM boot type.
Please help! Peace.

Purchased Zen Micro without Installation

I just bought a used Zen Micro 5gb from a friend who didn't have the original installation CD or instructions. I believe I can download everything from Creative's website, but can someone please tell me what the latest and best driver, firmware, and media application are? And what is the proper installation process: do I install the driver first or the application; when should I upgrade the firmware; etc?
Thank you in advance.

I hope this helps you out.
Steps to installing the Zen Micro v.x & 2.x in Windows XP.
Note: If you want to do a clean install. Uninstall everything that is related to the ZM. Including the driver, Creative Mediasource, and Zen Micro Media Explorer.
Note: You can find all of these files on the Creative Website. Click on the Support link and start from there. You do not need your Installation CD anymore.
Note: You must have Windows Media Player 0 in order to flash to 2.x firmware and if you are going to use MTP, playsforsure, or music subscription services.
Note: If you are NOT using MTP, playsforsure, or music subscription services, you do not need to install WMP0, and #5 and #6.
Note: When flashing the firmware, follow the directions and do not use the computer and the Micro. Let it finish before you start using the computer and the Micro.
Note: When the program installs and tells you to restart, do so. Do not try to install something else afterwards. It's better that way.
Ste
ps.
) Creative Zen and Jukebox Driver Upgrade version .30.03 (.3 MB) <--May or may not be needed. Required for .x firmwares. Install it if you have detection or device not recognized problems.
2) Creative Zen Micro Firmware update 2.20.05 (2.34 MB) <--MTP firmware.
OR
2a) Creative Zen Micro Firmware ..0 (2.03 MB) <--PDE firmware or non-MTP firmware.
3) Creative MediaSource Player/Organizer 3.30.2 (52.2 MB) <--Optional if you have found something else to sync your music.
4) Creative Zen Micro Media Explorer Web Update (48.24 MB) <--Optional if you have found something else to sync your music.
5) Creative MediaSource Plugin for PlaysForSure devices (version .00.8) (23.98 MB) <--Required if you want to use the software and have the 2.x firmware.
6) Zen Micro Media Explorer .00. for Creative Zen Micro (Software Update Package for Zen Micro Players with *PlaysForSure/MTP Firmware) (35.27 MB) <--Required if you want to use the software and have the 2.x firmware.

Zen Micro 6gb installation probl

Ok, so Iv'e sent in a 5 gb zen micro twice now because of that headphone jack problem, and this time when they sent me a new one, they "upgraded" me to a 6gb. Well, I try to use this 6gb with the software i have installed from the last Micro I had, and my comp will not recognize it. So I try to user the cd that came with my old Micro, and it will not install right. When they sent me this 6gb, the only thing they sent me was the Micro and its battery, so I have no way to know if the cd that comes with a new 6gb is different form a 5gb cd, because if it is, then am I screwed?

A firmware basically is what makes an electronic device tick. It is the software responsible for every and all functions.
The Zen Micro has two versions of firmwares:
The original version works with Creative's own protocol and thus needs the installation of drivers for the system to recognize it. However it will function with all Windows versions while there also is unofficial support for Linux and MAcOS.
The second version functions using MTP, a protocol made by Microsoft and as such it is only supported by Microsoft's Windows Media Player 0 under OSs that support it (which basically only are WinXP and Vista...)
The simplest way to see which firmware you have is to look in the Micros' menu under System->Information. There you'll see firmware version.
If they both have version (..0 being the latest) then you'll need drivers for the both. As I already said, when I tried to update the drivers without uninstalling the old ones the drivers were installed but they wouldn't work.
First of all make sure the player(s) is(are) connected to the PC FIRST.
Mind you, in my case the latest drivers were already installed (I updated them but then they wouldn't work, remember?). Now here's the thing:
When I opened the drivers properties I saw that the driver was DISABLED. (under General, device usage)
Ok, I enabled it, nothing happened. Then I tried to update the drivers. Here's what I did:
I put the CD with the original drivers in the dri've and selected for windows to look for the best drivers. After some time they indeed appeared to have found a better match and then they started installing them. After the installation was complete the driver's version was the same as rhe one BEFORE the "update" (since I had already updated to the latest version). However the moment the drivers were updated the device was finally recognized by the system, not even a reboot was needed...
You could try doing that too, if that won't work then you could try DLing the LATEST drivers (along with the Zen Micro Explorer) and install them AFTER uninstalling the old ones and REBOOTING. Again, it is important having the player(s) connected BEFORE starting the installation.
If after all that you still can't connect it ask again!
Cheers!Message Edited by Keyper7 on 02-9-200604:37 PM

Oracle 8i on windows terminal server(installation probs.)

-->>oracle 8i installation in terminal server.
i have termianal server client window.
and i am doing remote installation of oracle 8i from client window.
the installation completes copying all files but
when comes for net8configuration and database assistant..
screen gets hang..i mean that service become hang..
like in database creation assistant ..it is not going above 0%.
what to do?
using any other remote viewer will solve this probs?
regards

If you got answer please let me know. I got stock in same place for my Production installation.
[email protected]

Zen Micro Manual Booting Prob

Hi there,?Since two months I got the Creative zen Micro player, but now I got a problem. The problem in fact is that it wont boot when I hold the button. It ony boots when i connect it to the Pc. The same problem is there with shutting the zen player down, when i hold the button it wont shut down. When I want to shut it down I have to remove the battery first. I tried to search for this problem on other forums, but I didn't see this problem on any topic. I have updated the firmware, but that didnt helped, I am afraid that it is an Hardware problem.... Does anyone have a clue ?Dirk

apuffer: What happens is that if you connect it before installing the drivers it will mark the player as not having any drivers (normally you'd be prompted to intsall, and typically people cancel out of it).
There's a known problem caused by Quicktime 7, so firstly check for that and uninstall. Then try reinstalling the software again.
Assuming it installs OK hopefully it will pick up on the drivers being present, but if it doesn't just go back into Device Manager and delete the driverless Zen Micro device. Then physically disconnect and reconnect the player, and the drivers should install.

Zen Micro - Initial setup prob

I just got my Zen Micro, and in my excitement to get it set up I plugged it in before installing the software (OOPS)... it says in the manual not to plug it in before installing the software. I unplugged it and tried to install the software (the CD autoran when I inserted it), but the installation program crashes after clicking "NEXT" on the first screen. Does anyone know if this is because I plugged in my Zen Micro before installing, and if so, if I can fix it's

apuffer: What happens is that if you connect it before installing the drivers it will mark the player as not having any drivers (normally you'd be prompted to intsall, and typically people cancel out of it).
There's a known problem caused by Quicktime 7, so firstly check for that and uninstall. Then try reinstalling the software again.
Assuming it installs OK hopefully it will pick up on the drivers being present, but if it doesn't just go back into Device Manager and delete the driverless Zen Micro device. Then physically disconnect and reconnect the player, and the drivers should install.

Zen Micro 5GB - Installation problems - HELP ple

Dear All
I am sure must have been asked before, so please bear with me.
Just bought a Zen Micro and cannot seem to install the supplied software from the CD. Keep getting a InstalWizard 6003 error message. Have tried restarting, deleting temporary files (even connevting to net) and still get same message.
Have tried to install then by copying files to harddri've and running from there but that fails.
What am I to do or have I a dud?
All suggestions greatefull recieved.
Andy

I was also thinking - how's your cd player on the pc - is it generally ok ?
try copying the files from the cd to your hard dri've and running from there.
Sometimes you can get -6003 errors if some of the source files are unreadable for any reason.
If that fails then i suggest downloading from creatives website and trying the install again incase you just have a dud cd.
Seeing as you've just got it i'll also tell you from my own experience......
I have a zen micro 5gb bought it about 3 months ago and had no problems with the installation but that was on a fully patched up to date winxp sp2 with 2Ghz memory.
I did have issues with the zen micro itself hanging but i upgraded to the 2..02 firmare beta and it has been happy ever since.

Installation prob Essbase Administration Services 9.3.1 on HP-UX 11.11

Hello,
I'm having problems while installing the Essbase Administration Console 9.3.1 on HP-UX 11.11.
At the last step, I have the following messages in the Unix console:
...........May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
WARNING: The work folder exists. Make sure that it is empty.
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
EAS-INSTALL.LOG
==============
(May 29, 2008 4:56:50 PM), eASSuiteContext, com.installshield.product.actions.Files, err, ProductException: (error code = 601; message="Error 0")
STACK_TRACE: 12
ProductException: (error code = 601; message="Error 0")
     at com.installshield.product.actions.Files.install(Files.java:477)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
     at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
     at java.lang.Thread.run(Thread.java:595)
Thanks for your help.
Regards,
Andy

Hi all! I faced into similar problem in March. (installing hyperion EAS "MakeEDSLinkEssdlls: not found"
I have also faced to zip error messages as well. I have started communicate with support, and finally I should have installed each product in separate HYPERION HOME, then I have moved them into one. It isn't easy, but can be done. It is a bithunter method:
First install Shared Service, then Essbase Client and Server. It should be ok.
Configure them with configtool HH/common/...
Then install EAS in different HH. You will have another .hyperion.<hostname> file, so save the 'original'. You will find also a HH/common/.. configtool.
Copy the common dir of that HH to the "original" one and other parts in a separate directory under HH original. Then you have to edit product.xml (HH/common/config/product/...) to point product to their new location (in the "original" HH) and copy to the "original". Then run configtool, and you shall see eas unconfigured in productlist as well. Have attention to have the right .<hostname> hyperion files, when starting configtool. Then you can config eas as well. Good luck! *****It is not a supported method, so do it your own risk! Make copy of your existing phases !!!!! ******
Lacko

Itunes and windows installation prob...

I had an older version of itunes and tried to upgrade to 7.1. Everytime I try to download it, I click on the 'itunes setup' icon on my desktop and a 'windows installer' window pops up with a bunch of info that I don't understand. I uninstalled the old itunes and quicktime...any other suggestions?
Windows XP

http://img148.imageshack.us/img148/8793/itunesvs7.png
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Micro cd installation prob

Similar Messages

Maybe you are looking for