Micro New Warrenty apply for us with old warren

well, as u all know, the Zen Micro comes with a year warrenty and 3 months labor. Now, it has changed, due to the fact of many problems. It is a year warrenty and a 2 months labor. You can even see for urself on this Circuitcity link http://www.circuitcity.com/rpsm/oid/...essory.do#tabs
right under where it says "What's in the box" under the pink zen micro.
So well, if i bought my zen micro about 3 months ago, in the period where labor was still 3 months, does this new 2 month labor apply for me as well?

Umbrella_SWAT,
The warranty that you are covered under will be the one that is printed in or on the box the product came in. Currently the website for the US lists the warranty period for the Zen Micro at 2 Months Parts/ 3 Months Labor, however with the addition of the Creative Care Protection Plan it can be extended to a full two years for both. I will look into the Circuit City link to see if perhaps there is a misprint there.
Jeremy

Similar Messages

Updater says no new F/W for 6630 with old F/W (2.3...

Hello ppl,
First of all - a big thank you to Nokia for providing this phone firmware update service!
I'm having problems updating my old 6630 firmware with the following details:
V 2.39.151
19-11-04
RM-1
UK English
Nokia Software Updater correctly identifies the phone (Nokia 6630 RM-1), and starts searching for updates, but after a good few minutes searching, returns back with the message 'No updates for selected phone'. If I recall correctly, the latest 6630 update is at least V 5.xx, so quite honestly I'm baffled.
Any ideas as to what may be the cause?
Thanks and keep up the good work!!
jkbuha

HI! I too have the same problem the Nokia6630 which I have has F/W 2.39.15 of 11-11-04 with RM-1, I am in Pakistan and it is in Middle East Region. Now the same message of Software not supported it being dispalyed.
I wld be thankfull to all if any help in this regard be done.
Thanks.

New computer has been loaded with old Itunes library but a number of earlier purchases say they are not "authorized" on this computer even though the bulk of my library works-- this is only about 5% of the total but were all purchased 9/18/2008 or before?

New computer has been loaded with old Itunes library but a number of purchases prior to 9/18/08 are not "authorized" when I try to play them.
They are all items I purchased from Itunes but they won't play any longer even though they show in my Itunes library.
Doesn't work when I enter account info and password either.
This is only about 5% of my library and many purchased items play no problem.
Any help would be appreciated.

Two words, Migration Assistant. It will transfer files between two Macs using a firewire cable automagically.
http://www.apple.com/pro/tips/migration.html
Three words, Target Disk Mode. Use a firewire cable to connect two Macs and then hold down the T key when you boot the Mac you want to transfer files from, G4 Tower. It will appear as a hard drive on the desktop of your Macbook Pro. Then you can just drag and drop the whole folder.
http://docs.info.apple.com/article.html?artnum=58583
Message was edited by: Jon Thornburg

I heard there is a new Apple TV for use with apple ipad air. Is this true?

I heard there is a new Apple TV for use with apple ipad air. Is this true?

Re: I heard there is a new Apple TV for use with apple ipad air. Is this true?

New Webservice Datasource:Not Overwriting with old one in Production

Hi,
I have a Webservice Data Source which is loading XML based Data to DSO & Then to Infocube.
In development I it is working fine even Loading Delta perfectly. Then moved it production.
Again due to some client request I have made changes in Web Service Data Source & DSO & Infocube.It is also worked fine in Development. Again moved to production.
But after moving to production all objercts of DSO/Infocube changes are fine. Even Transformation/DTP is as it is with Development for upload from DSO To Infocube.
Issue : The New Webservice datasource is not overwriting Old one in Production even I capture in Transport request all changes correctly, same also applies Transforamtion/DTP too from Webservice Datasource to DSO..
I need How to Overwrite Datasource/Transforamation/DTP in Production with new objects of same in Development.
Please suggest.Need the steps in detail. It could be bug or some other issue which need to look into.
Regards,
Subhadarshi

That is exactly correct: Time Machine backs-up entire systems, not just data. That's how many folks back-up two (or more) Macs to the same TM drive without conflicts.
You cannot combine them.
From one Mac, you see only it's backups when you +Enter Time Machine.+
But you can see those from another Mac by holding down the Option key as you select the TM icon in the menubar, changing +Enter Time Machine+ to +Browse Other Time Machine Disks.+ Then you can browse, restore, or delete those backups normally.
You also need to know that TM backup processes on the new Mac will not delete the backups from the old Mac in the usual fashion. You'll have to do that manually (via TM, not the Finder), or bite that bullet and erase the drive.
To delete backups from the old Mac, +Browse Other Time Machine Disks,+ select the backup you want to delete from the "cascade" of Finder windows and click the "gear" icon in the Finder window's toolbar, then select +Delete Backup.+ You'll get a confirmation prompt, then one for your Administrator's password, then TM will delete it.
Usually the deletion will be very quick; but some backups will take a very long time to delete (if you exit TM, you may see a progress bar). Unfortunately, there's no way to tell which will be quick and which won't.

New AE Won't Work With Old Verizon DSL Modem

I'm trying to set up a new AE station for a friend. She had an Airport station that worked fine. The DSL modem is like 6 years old or something. Of course I've tried calling Verizon, but am on hold forever. Is it possible the modem is too old? I've looked at ports, all settings I can think of, but nothing. I've set up as many as a hundred of these, so have some experience. Just hoping for some feedback 'till I talk to them. It's PB 12" with 10.4.3 running. It's brand new. When I put the old station back, no problem. Any help is appreciated.

With the old base station connected open Airport Admin Utility and "Save a copy as..." something. Connect the new one and import that configuration. If it is really old that won't work but it is worth a try.
Is PPPoE needed for the DSL connection?
Have you powered everything down and slowly brought them back (modem, AE, and computer)? Sometimes it takes a while for an ISP to recognize a new network device as valid.

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

Using New Apple 27" LED Display with old MacBook Pro (Late 2006) 15"

I've got a MacBook Pro (Model # A1211) Core2Duo 15" 2.16 GHz with only 128 MB of VRAM and a built-in DVI port (I think it is dual-link DVI)
My question is, will the new 27" LED Display work with this machine at its best resolution? If so, what adapter would I need to get it to work?
Thanks!

I don't think the Kanex adapter is the best one to purchase. The information on their website says it will only drive the 27" at 1280 x 720. Although I have not purchased one yet, the ATLONA website http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html, claims their Atlona AT-DP400 converter will drive the 27" at its highest resolution of 2560 x 1440. I have read confirmation from some users that this is the case for the DP400.

Creative Zen Micro Photo not tested for use with Windows so cant install it! Please help

Heya! Basically when installing the software for Microphoto it stops saying that as my device hasn't been tested for use with windows it cant install for fear of corrupting my laptop! Can anyone help me overcome this because i installed it aagges ago and it let me have the option of continuing the installating, but i had 2 uninstall it and upon reinstalling it it does not give me the option to continue. It just cancels the installation. Can someone please help me as this is driving me nuts!! Y is it that technology is continuosly mucking up grrrrr!
Lucy

Are you runnning Win XP SP2? If so, this is a standard warning about unsigned drivers, but it should still give you the option to "continue anyway" to complete the installation.
Also, make sure you have Windows Media Player 0, as this is needed for Windows XP (drivers) to recognize your MicroPhoto.

New AirPort Extreme backwards compatible with old Mac?

I have an old airport express from around 2004 and I made the mistake of upgrading directly from snow leopard to mountain lion. Subsequently I have been living with having to re enter my long WEP key every time I turn on my computer because of an incompatibility issue between the airport and my 2010 iMac. I want to get an AirPort Extreme to end this issue as well as increase the distance my computer and other wifi devices can be away from the base station.
The problem is that my parents have what i believe to be a 2006 intel iMac. I know the utility software for a new airport won't run on their old iMac. That's fine because I can run it on mine.
My question is, would my parent's old iMac have issues connecting to a network running on a new AirPort Extreme?
Thanks!

No, there would be no issues as WiFi is a standard.

How to copy and replace new Mountain Lion hard drive with old Snow Leopard drive?

So far I have not found an answer to my question, so I am hoping that this is feasible.
A while ago I purchased a used 2010 Macbook Pro running Snow Leopard that did not have the installer disc. A week ago the hardware died on me, so I replaced it with a new 2012 Macbook Pro running Mountain Lion.
The problem is that I purchased a 1 TB aftermarket HD for my old Macbook Pro and want to replace the current smaller hard drive in my new computer with it. I've already run Time Machine and put all of my data in my new computer so I figured that it would be possible to simply copy that disk image back over to my old drive and replace it. However the computer showed that they weren't compatible. When I tried to put my old hard drive in my new computer there was not a bootable OSX available.
Since Mountain Lion already came on my new computer I do not have an installer that I can use.
Is there anyway I can copy the current Mountain Lion information from my new hard drive and basically have a fully functioning, bootable copy on my old hard drive that I can put back into my new computer?
Thank you.

Well, if you put the HDD from the old Mac into an external enclosure you can use a tool like Carbon Copy Cloner or SuperDuper! to clone the Mountain Lion installation onto the 1TB drive. If you go this route, I would suggest you consider using CCC as it does have the option to clone the Repair Partition as well as the boot volume.
Another route you could take would be to put the 1TB drive into the new MBP, and then boot to the Internet Recover . From there you can re-partition the drive and install Mountain Lion clean on the 1TB drive. During the installation process, you will have the option to use the Migration Assistant to migrate your data & apps. You can use your Time Machine backup for that, or if you have the original drive in an enclosure, you can migrate directly from the external drive. I have used this latter method myself a few times.

Can't get alarm to work on new ipod--never had trouble with old ipod

Greetings all,
I just got a new Classic 120GB and it is great but I can't get the alarm clock to work...when I set a time for the alarm clock, it doesn't seem to remember this time but it instead defaults to an hour later than the current actual time...I tried several times to reset the alarm for a minute or two in the future so I could test it and see if it made any sound...I have reset the ipod and the normal time and date display is correct. I also can't get the beep sound to work, although I can hear the clicking when you scroll through things and so the internal speaker is clearly working. I used my old Ipod Photo for years as my alarm clock and I never had a problem with it...anyone have any idea how to fix this? I have the most recent ipod software, am using an older 17" G4 powerbook running 10.4.11. is there something obvious I am overlooking?

update: I can get an alarm message (you have an alarm) and a choice to dismiss or "snooze" but the internal speaker is still not kicking in and obviously a silent alarm is not ideal in this instance. When I try to hear the "beep" under tones, it doesn't make any sound but bounces me back to "sounds"...I can hear the clicking when scrolling and so the speaker seems activated but is muted somehow for the alarm. My old Ipod had a nice little alarm sound and I was hoping to use my new Ipod as an alarm clock as well...not a life or death thing, but I can't figure this out and I have read everything I could find. Help!

Got new ipad; data plan transferred to new SIM; what to do with old SIM?

Hi, I bought a "new iPad" and just set it up as a restore of my old iPad. It seems to have automagically transferred the data plan from my old sim to the new sim that was already in the iPad. The old SIM isn't working any more, I tested it.
I am giving my old iPad (iPad 2) to a friend, I'm wondering if I should give them the old SIM card as well, it seems like it's ready to be set up as a new account.
When I put the old sim card in the new iPad, it says there's no data left on it and asks if I want to set up an account.
There was also a note that you could transfer an old plan to this SIM just by logging in to the account for the other SIM, so I think this automatically happened with the new iPad.
Should I give my friend the old SIM as well as let them use that to set up a new account, or should I trash or store it and ask them to go to AT&T store to get a new sim?
Thanks

Your friend can use the old SIM card.

Which new OS can I use with old Tecra 8100?

I want to use this old laptop which originally had win98. I managed to put win xp on it, but it is unworkable slow. Today I tried Lubuntu (a linux distributioon specific for oldies) but that too is too slow.
I just want a simple OS to browse.

New OS? I think you are mean something like Win Vista or Win 7?
I doubt that you will be able to use the Win 7 on this oldie ok, maybe you will be able to install it but Win 7 needs a lot of hardware resources and I think you will not be satisfied with the performance.
So stay with Win XP other Win OS needs more hardware resources than XP

New camera dies Rebel t5i with old and new battery

Camera is 12 months old and the original battery appears as if not holding a charge. After charging, the camera will come on and die when pressing the shutter button to take a picture. I purchased a new battery, charged it and the same happens again. Seems that maybe the old battery may not be dead after all. Could this be the charger or is this a camera issue. If a camera issue where do I go to get this looked at. Bought camera at best buy. You think this caliper camera would last longer than a year???

Are there any third party components involved in charging or using your camera? Did you, for example, add a 3rd party battery grip?
I ask, because just occcasionally we'll get this sort of question where the camera fails to perform as expected but the person seeking help didn't mention the 3rd party component. Once we find out about it and eliminate it from the test... suddenly the camera works fine again.
Canon factory batteries tend to last many years assuming you are using the original Canon charger (I do NOT like to use "fast" chargers as they stress the battery trying to charge it in a hurry and shorten it's life.)
When you insert a freshly charged battery and power it up... does the rear LCD screen come to life and, if so, do you see the battery charge level indicator showing that the battery is full?
This may be a problem with the camera itself and/or with one of it's cut-off switches. There are two micr-switches will cause the camera to immediately power down if they are not engaged. One is on the battery compartment door. The other is on the memory card door. If you power up the camera then VERY SLOWLY open these doors, you should find that you can open them about 1mm and then the camera will power off. If you barely touch the door and the camera shuts down, then it may be that you have a bad switch. Make sure the two doors are undamaged and able to close easily without any obstructions (if they aren't fully closed, it would make sense that your camera spontaneously shuts down.)
You may need to contact Canon service for help as there's no "setting" that would make the camera do this. The T5i is a good camera, but it's just possible you have a problem with yours -- it happens and it's not an indicator of low quality. I bought a new car that had a water pump failure within the first 5000 miles (that was a shock) even though everybody else with the same model car didn't have a problem with their water pump. It happens. Could they increase quality control to the point that it'd be very hard to get a car released with a bad water pump? Well... they could improve build standards, testing standards, and inspection standards... that would REALLY drive up the price tag of that car... and just occasionally they'd still get a bad one anyway. You can never get quality to 100% for any product.
Tim Campbell
5D II, 5D III, 60Da

Micro New Warrenty apply for us with old warren

Similar Messages

Maybe you are looking for