Micro Photo Charg

can anyone give me the short answer of the micro photo charging problem? It is a brand new purchase and I have upgraded the firmware.

I have a regular zen micro, and had the same problem.Bought a new battery and still it didn't charge but showed the charging light. I accidently stumbled on this to get it charged. Try it.... Plug in USB adapter.2. Turn off zen AND set in locked position3. Touch the center touch pad. My zen didn't "glow" before I did this, but after I locked it and touched the touch pad, it started giving me the pulsating glow and in a few hours, the glowing stopped and it read full charge. I don't know the manual doesn't tell you about the glowing, but I had to google it to find out about it.

Similar Messages

  • Zen micro photo charging without

    How do I charge my zen micro photo using USB without XP? I tried charging using my office PC running Win 2000. I left it plugged in for 8 hours and my battery level never increased.
    Any suggestions?
    Thanks
    OZ

    I tried switching to mass storage mode, plugged to USB (with Win2000), waited ~2.5 hours and no increase in battery level. Thanks for the suggestion, but it is annoying that my ZMP does not have support for Win2000 in the first place, but now it can't even charge without XP.
    Creative!!! Here are some suggestions
    . Windows 2000 support.
    2. USB charge capability with at least Win2000.
    3. New software to manage files and playlists already on the ZMP.
    I still have another week to return the ZMP, but it looks like I'll return it.

  • Creative Micro Photo charging on a noteb

    i've read something, i don't no where anymore, that you can't charge the Creative Micro Photo
    on a notebook, because the usb-ports of a notebook or to weak for that, so you have to do that
    on a desktop-computer, is that true ?

    Hi,
    No that should not be the case. Now thats not to say some manufacturers don't 'throttle' power usage when your laptop is not docked or mains powered to prolong battery life. But from a point of view of charging it shouldn't be an issue. As it takes approx 4 hours to charge a MPhoto chances are your laptops battery will not last through the full re-charge cycle anyway.
    If you are looking at prolonged periods with out access to mains you'll probably find availing of the replacable battery facility and aspare battery or two fully charged before departure will be a much better option.
    Hope this hel
    ps.
    john

  • Battery chargers for Micro Photo? Charging for the first ti

    Hello all--
    Purchased a Micro Photo for Sister who is taking it to Baja - So no computer for charging.
    Would like your imput on Aftermarket chargers, wall plug, car lighter and really about the battery packs that use 4 AA's for charging. Also any hints on charging for the first time, and using the lock button for better charging?
    TIA

    Link: http://us.creative.com/products/cate...subcategory=57? and here: http://stores.ebay.com/Creative-Labs-Factory-Store?. When charging battery for the first time,I ordered a "Zen Micro Power Adapter" with the intention to use it for the fist time charging(of battery) to make sure it charged complety... But I didnt wait and went ahead and charged the MPhoto via usb/pc. I put it at 4.00pm went out to the mall with the intention to come back at 9.00pm but I came later than that(0.00) and the MP was fully charged(I beli've) it was like in a "stand by mode" with the screen blank.

  • Cheap/free DIY Zen Micro/Photo Case and wall charg

    Ahoy! I've been on the Head-Fi forums and figured to check out these and didnt find much.
    Its simple to make a hardcase for your Zen Micro or Micro Photo, check out mine!
    I used a penguins mint tin, (like Altoids but caffinated)
    also, the standard wall charger for USB motorola phones will charge your Zen Micro Photo
    its still a 5v usb charger, it works and you can find them cheaper than one from
    creative
    <img border="0" alt="My DIY Case" src="http://img.photobucket.com/albums/v627/Fev3r/Zen/DSCN087Small.jpg">
    [url="http://photobucket.com/"><img border="0" alt="My DIY Case" src="http://img.photobucket.com/albums/v627/Fev3r/Zen/DSCN086Small.jpg">[/url]
    [url="http://photobucket.com/"><img border="0" alt="My DIY Case" src="http://img.photobucket.com/albums/v627/Fev3r/Zen/DSCN9986Small.jpg">[/url]
    This was very easy to do.
    Take the mint tin, trace it onto the back of a peice of foam (the white plasticy side)
    cut slightly inside the line, about /3 a centimeter.
    measure the height of the tin and take about /5 to /4 of a cm off of that and cut straight down the long edge of the foam, its an exact fit (if you want it fitted like mine)
    you will need TWO of these, its double layered
    Check the fit of the peice before you place anything.
    i placed the sides first but do whatever you find easiest.
    fold the long peices in half to find the center and just start applying from the bottom of the tin.
    next, cut a peice big enough to cover your screen but not the buttons.
    take the sticky side off and lay the foam, sticky side up, onto the screen. close the tin.
    Your MOST of the way done
    now take a dremel (what i used) or what ever else. maybe a nail and hammer the corners and scisor the between? (that may be sharp)
    and you have yoruself a great case everyone will marvel at and youll be proud of it, post your pics here or atleast email me at [email protected]
    (edited for grammer and aded images and title)Message Edited by HalfTwitch on 0-06-20072:59 AM

    I deal with the slight buzzing while the screen is on, i just haev my screen cut off in 0sec of idle and its good to go, thats a known bug.
    Also, one time my zen kinda froze booting but that was a fluke adn has been fine since then.
    I Love my hard case i made, it has a mysterious ding in it but that just means that i spared my zen from that same ding.
    I've been IM'd and asked abotu it overheating in the enclosure and i've used it in the sun for hours on end and the zen itself stays cool, i dont think there is a problem with that at all.
    If you rmaking one know that its one layer of foam on the bottom and two on the sides.
    the easiest way to apply the screen protector is to peel the sticky off of lay it on the screen, sticky side up and then just close the lid.
    I had the idea of putting a hole in the lid where the screen is and glueing the clear plastic from a CD case but scrapped that idea because it would look tacky and get dirty.

  • Zen Micro Photo will not charge batt

    My Zen Micro Photo will work (play music) when plugged to?the AC charger. However, it will not charge the battery. Since my son has a Zen also, tryed the fully charged battery, and will not play in he player.
    Why will it work when plugged to the charger, and not work with battery?

    Hi,
    Try to perform the Recovery Tool of your unit.
    If that doesn't help either, get in touch with our Support.
    Best of luck.

  • My zen micro photo won`t charge with anything else but my usb port h

    i bought a charging package for my creative labs zen micro photo. when i use the wall charger or the car charger, it shows it is charging but the battery icon on the micro photo does not does not fill up. i leave it on?for hours but that does not help.i bought this charging pack from ebay and it says it is mead for the micro photo.any thoughts. thank you

    this was an after market package it only cost me $4 and would cost me close to that much to send it back. i guess i will buy the one you got at creative labs. you said it works with your zen micro photo?would you send me the model number of the wall charger. thank you so much

  • Help with my Bran-New Creative Zen Micro Photo. [Questi

    <EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
    My Specifications:
    My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

    Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

  • Need help with Zen Micro Photo: It stays in recovery m

    Just recently, my zen micro photo has been staying in recovery mode. I have tried all of the four options available? to me in recovery mode. .) Clean up 2.) Formatt All 3.) Reload Firmware? 4.) Reboot. When I try "Reload Firmware". It doesn't really "reload". All it does is erase the current firmware, which it has done several times. My computer doesn't really realize the player. It doesn't allow me to acess my songs, which have already been deleted. It says the "Player is not connected". At first, I thought I needed to charge. I charged it to maximmum. The battery is "FULL". Also, the firmware update doesn't recognize the player either. Whenever I select the reboot option, my player reboots to recovery mode. This does no good, as I have tried all of the available options in recovery mode, and they have done no good. Your help would be greatly appreciated. Thank you.Message Edited by Damaniscool on 04-2-200707:29 PM

    do you hear a sound from the hard dri've like it's stuck? this is common. if so, please search this forum for "hard dri've whack" or "percussi've repair".

  • Having big problems with Creative Zen Micro Photo!! I need much urgent help!

    Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
    I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • Zen Micro Photo Conce

    I am about to purchase a Zen Micro Photo. I am choosing it over the Zen Micro because of the many posts about the headphone problem on the Zen, the clearer screen on the Micro Photo, and the lack of availability of the Zen Micro in the stores - very few stores are selling the Micro and many have only the Micro Photo (which leads me to believe that the Micro is being phased out - at least in the marketplace). I have some concerns about the Micro Photo - there seems to be some posters on this group who have a buzz from the screen. Since many reviews of the Micro Photo say how great the sound is, I am going to assume, perhaps foolishly, that the buzz has been taken care of in the recent releases or this is not as common a problem as some would like to state. My other concern is and question is how fragile are these? There are warnings about NOT jogging with the Micros. I have not seen this with other companies'hd players. I plan to use this in a car. Is this going to be a problem? Sometimes roads are bumpy.
    One of the main reasons that I have chosen the Zen is the bookmarking features. I use the mp3 player for audiobooks and I want to be able to set a bookmark in mid track of a book, listen to something else, and then come back to that same place in the book and continue on - which from the Micro/Microphoto manuals I should be able to do. Is this correct?
    Surprisingly, few mp3 players can do this - the Ipod can't despite it's claim that it can.
    I appreciate any feedback.

    Information on LiON battery lifespans.
    <font face="Verdana, Arial, Helvetica, sans-serif" size="2">A lithium-ion battery provides 300-500 discharge/charge cycles. The battery prefers a partial rather than a full discharge. Frequent full discharges should be avoided when possible. Instead, charge the battery more often or use a larger battery. There is no concern of memory when applying unscheduled charges.
    Although lithium-ion is memory-free in terms of performance deterioration, batteries with fuel gauges exhibit what engineers refer to as "digital memory". Here is the reason: Short discharges with subsequent recharges do not provide the periodic calibration needed to synchronize the fuel gauge with the battery's state-of-charge. A deliberate full discharge and recharge every 30 charges corrects this problem. Letting the battery run down to the cut-off point in the equipment will do this. If ignored, the fuel gauge will become increasingly less accurate. (Read more in 'Choosing the right battery for portable computing', Part Two.)
    Aging of lithium-ion is an issue that is often ignored. A lithium-ion battery in use typically lasts between 2-3 years. The capacity loss manifests itself in increased internal resistance caused by oxidation. Eventually, the cell resistance reaches a point where the pack can no longer deli'ver the stored energy although the battery may still have ample charge

  • Zen micro photo wont connect

    well my brother got a zen micro photo for his birthday yesterday, so in the evening we tried to start putting music on it and it wont even connect. i have windows with service pack 2, windows media player 0, and the micro explorer. now when i connect it to the computer it wont even start charging :/ and the explorer says its not connected, plz help

    a way to make windows detect it is too try and run add hardware wizrd in controlpanel also if u make theplayer gointo recovermode then connect it to ur pc windows USUallydetects it as a plaer in recue mode i think well try if u dont know how toget there i think that u hold down the play/pause button er i mean first take out the batery and then hold down the play/pause botton while u plug the usb into ur pc and i think itll go into recovery mode and windwosshould detect it then and thats when you caninstall the firmware using the executable file and if something goes wrong try it again and usually itll work

  • Zen micro photo wont char

    okay, creative explorer picks it up. I can put music on it and everything but it doesn't charge! This is getting really bad. My Bat is already dead and i can't charge it. This is my second faulty zen micro photo in less the 7 days! Any reason why it wouldnt be charging? help would be greatly appreciated(<--spelling)

    Won't charge? Can be a couple of reasons.
    - There should be a blue pulsating light when charging and the flash icon should appear at the batt icon.
    - The batt itself, player or even the USB cable may be faulty.
    - The USB cable is not plugged in correctly.
    If these 3 are not the cause, bring it back to the store and have them do a direct charging simulation for you.

  • Creaitve labs zen micro photo

    hi everyone ..... my daughter has been bought one of the micro photo zen 4gb i know iam asking what has prob been asked before...but can anyone tell me if this works with vista and will this have digital rights for the internet....can this be adapted for vista? what firmware would i need to download and where from...i? would really like to have this working for her have been given the task of trying to sort this and you guys seem like the only ones who could help....i would be very grateful guys if you would spare a second of your time to help....regards paul

    loading time? do you mean the time it takes to recharge? on USB i think it's around 3-4hrs. i bought the AC adapter recently, i love it. it was around 25$ at walmart and that cuts the charge time by around /2 or so. you can also run it on AC without the battery so it'll last you longer.

  • Zen micro photo malfunct

    I got a zen micro photo a couple of weeks ago, every thing installed fine, it worked perfect. Then one day I go to plug it in for a charge and get an error message "One of the divices attached to this computer has malfunctiond and windows does not recondnise(spell) it. As soon as i get this error, the zen micro completly freezes. The only way i can turn it off is if i take out the battery. At first i thought this was the player it self, so i went beck and returned it. Got a brand new one and everything. I had all the software installed so i just plugged it in and guess wat... i got the same error! I tried reinstalling everything and starting from scratch, but i keep on getting the same error. I need help guys! I want to get this thing to work and there is no way in heck that im getting an IPOD! Im running win xp sp2 recently i installed a usb 2.0 card (which is plug and play) this was inbetween the time i hadn't charged my zen yet. I tried pluging it back to my old usb ports but i still got the same error. I dont think its the usb card...
    i need help plz! I cant charge it because it freezes when i plug it in and my battery is almost dead.

    I never encountered this with my MicroPhoto, perhaps one of the devices malfunctioning could be in your computer itself and not the player?

Maybe you are looking for

  • File Adapter Issue

    In file adapter Source system having 7 columns and Target system having 6 columns? how to synchronise it? Edited by: 995694 on Apr 5, 2013 9:33 PM

  • Yes I searched!!!!

    I know you need a video converter to transfer videos to the Ipod....... I downloaded one, but now how do I get the video (DVD movie) to transfer??? Sony Vaio, Dell XPS   Windows XP  

  • Variant for selection screen with the Table control entries in another Tab

    Hi Guys,   The requirement is to create a variant for the two tabs on a selection screen.   First tab contains the select options and the second contains table control for making entries.   So will it be possible to create a variant when the user mak

  • Layer Visibility Javascript

    Hi, I am working on a model of a dovetailed drawer. It is a simple model, but it must be made to show different design options - to be able to switch them back and forth. I have tried to use Daniel Beardsley's "Build Your Own Car Prototype" as a temp

  • Apple Mouse won't open files

    My trustee old iMac has never given me any problems until recently. When I try to open a file by clicking on it with my mouse, it highlights the file but doesn't open it. I can open flies by using Open File. I have tried another Apple mouse but no lu