Micro photo lost installation

I can't find my installation CD and I can't install the firmware on my pc. Is there the any way for me to download the firmware (the updated version won't work because the firmware on the cd isnt installed)?

Go to Creative website : Support -> Download -> ... And download program .

Similar Messages

After Archive and Install, music and photos lost

Hello, I installed Leopard yesterday on my Imac desktop and it went fine, but then somehow it locked me out of the hard drive, and then...the blue screen. I put the orginal Tiger disk back in and re-installed the previous software, opting for 'archive and install'. It worked but my question is this;
Within the previous system folder, my music and photos are still missing. All I see is the iphoto icon which opens to a completely empty program. (Yet the info on this Icon says it is a 1 gb in there). Are my photos lost, really? And if not, how may I retrieve them? Thanks in advance.

You may find it in the Previous System Folder created during an Archive and Install that contains your old system. Assuming you have no need for its contents you can delete the PSF and recover the disk space.
Of course if the hard drive is corrupted then you may have performed an Archive and Install on a corrupted drive which will result in a corrupted installation. Consider doing the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Micro Photo software

Hello,
My computer hard dri've died and I replaced it. Of course, my softeware to organize and load music to my Zen Micro Photo was lost when it died. I can't even remember if it came on a disk or I downloaded it but if it did come on a disk, I can not find it. I have been all over the creative website trying to find where I can download the software but all I can find are Creative ZEN MicroPhoto Firmware .3.0 and Creative ZENcast Organizer 2.0.0 Suite
both of which I downloaded. Are these the correct programs They do not look anything like my old progams and they will not recognize my MP3 player anyway.
. What exactly should I be downloading to get my player going again and to be able to organize and upload music to it's
2. Why computer recognizes my player when I plug it in but asks to install software. What software do I need I have Windows XP (sp3) and Media Player .
Thanks for the help. This would be so much easiler if I could just talk with someone.
Tim

Hi Kydillie,
Can you post up the firmware version of your ZEN MicroPhoto?
That will tell us what software you need.

Creative Zen Micro Photo Media Explo

I've lost the Cd that came with my Zen Micro Photo and i can't seem to find any places where I can download zen micro media explorer.
I tried the Zen Micro's media explorer but that doesn't work.
Can anyone help me please?
Thanks

Hmmm, are you opening it up after you plug in the Zen?

My Zen Micro Photo 8gb has gone m

Hi all,?My Creative Zen micro Photo 8gb has gone a bit mad. It had a firmware update, and then wouldn't work. SO I hooked it up to the PC and nothing was happeneing. It tried to rebuild the library, but froze. So I followed tech suppourt, and formatted it, and lost all my music, and it wont do anything now. It gets to the Recovery Mde Screen, and does the following:?Clean Up: - Says it's cleaning up, but does nothing really. Format All: - Says formatting, and does so. Reload Firmware: NOW, here's the interesting one, I hook it up to download the firmware... AND the PC recognises it's plugged in, but the firmware application doesn't. Reboot: - Reboots straight into Recovery mode again!?Very frustrating. Can anyone help?Cheers

Mine too! It completely froze to Recovery mode, I can't even turn it off! I had to take off the batteries and when I open it, it's stuck in there. I had it replaced by Creative Labs. Btw, I commend their tech support. The email support is fast and very responsi've. A RMA was issued to me and they were able to replace it in a matter of days. Then my 2nd player (refurbished one,what I got back) was working for 7 days when it froze again. then it says rebuilding library or something..but it won't finish loading. It was stuck to that page, cannot turn off, had to take off batteries again. I did this 5 times, since it failed to reload the library. Afterwards, it displayed Hardware Failure.
Now, I'm currently waiting for their email feedback since I reported the problem again.
My advice, let them know. Hope you can work yours out.

Creative Zen Micro Photo with Windows 2000 Professio

Well, I purchased a micro photo about 5 days ago and am thrilled with the quality so far but i have old software on my computer due to its age and was wondering what software i need to run in order to transfer songs to my zen. I read the post above with all the drivers and it was just jibberish to me. I have wmp9 and would like to run it through that but my device isnt recognized. What download do i need to have in order for it to recognize my mp3 player?
Thanks,
ZachMessage Edited by yamaha4 on 0-0-2006 0:6 PM

Zach,
Have you try the legacy driver in this post before with WMP9? Although the Micro Photo player isn't listed in the list, other forum member has posted success with the driver so if you haven't try it yet might as well give it a try.
Jason

Help with my Bran-New Creative Zen Micro Photo. [Questi

<EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

[Zen Micro Photo] Stuck in b

My Zen Micro Photo gets stuck in the bootscreen. When I turn my Zen on it says "Creative" and after a couple of seconds "Zen Micro Photo". While "Zen Micro Photo" is in my screen it does nothing. I tried to take out the battery and turn it on again, but still nothing. Only after a couple of hours it starts working again.
It als doesn't connect properly with Windows XP.
The problem started a couple of days ago when I activated the removable harddri've mode on the Zen to connect it to Windows 2000.
Should a reload of the firmware help?

See the section "My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?" in the FAQ.

SOLUTION - Zen Micro Photo Stuck in Recovery M

My Zen Micro Photo got stuck in recovery mode after I followed Creative Labs Technical Support suggestions. They had me do a Clean Up, a Format All a Reload Firmware and a Reboot. After doing this my unit was stuck in Recovery Mode. They then had me load the latest firmware. v .3.0, from a PC connection and I found that it worked fine, but doing the above steps put me back into Recovery Mode hell. So I did some testing.
I loaded firmware version .20.0 from my PC thinking the problem might be in the firmware version. Doing the steps they had asked me to do caused me to be in Recovery Mode Hell, so again I loaded firmware from my PC.
This time I went through each item one at a time and rebooted after each. Clean Up/Reboot, Format ALL/Reboot and Reload Firmware/Reboot. They all booted normally except when I did a Reload Firmware.
Next I loaded firmware v .3.0 to my unit again and did the same test. Again it put me in Recovery Mode Hell after I selected Reload Firmware from the Recovery Mode screen.
Conclusion DO NOT LOAD FIRMWARE FROM RECOVERY MODE. If you have to load firmware at all, do it from your PC connection. I'm going to copy this into the VERY LONG message I have had with Creative Labs Technical Support over the past 5 days and let them know what I have found. I hope this helps others to fix their Micro Photo.

I am having a similar problem. I am stuck in recovery mode and my PC won't recognize the MP3 player at all? I have rebooted, cleaned up, formatted, pulled the batt, etc. Finally I pulled the battery for longer than 30 seconds and that seemed to fix the problem. We will see.
JW
ECIT: oh ya, I am using a microphoto as well.Message Edited by Jfawkingdub on 06-29-200703:2 PM

NEED HELP!!! with my Micro Photo

i need help i was having problems with my computer recognizing my Micro Photo so i was in to recovery menu so then i accidentally hit the reload firmware option and now i cant get it to work it only goes onto the Recovery Menu and i cant get the firmware updater to work and i cnat find no files of the firmware itself...but the weird thing is i can access the Micro Photo itself through my computer and browse it but idk wat to do some plzzz help me

themagooshow,
You don't need USB2.0 but you will need to have at least Service Pack for your Windows XP and Windows Media Player 0 installed.
Jason

Need help with Zen Micro Photo: It stays in recovery m

Just recently, my zen micro photo has been staying in recovery mode. I have tried all of the four options available? to me in recovery mode. .) Clean up 2.) Formatt All 3.) Reload Firmware? 4.) Reboot. When I try "Reload Firmware". It doesn't really "reload". All it does is erase the current firmware, which it has done several times. My computer doesn't really realize the player. It doesn't allow me to acess my songs, which have already been deleted. It says the "Player is not connected". At first, I thought I needed to charge. I charged it to maximmum. The battery is "FULL". Also, the firmware update doesn't recognize the player either. Whenever I select the reboot option, my player reboots to recovery mode. This does no good, as I have tried all of the available options in recovery mode, and they have done no good. Your help would be greatly appreciated. Thank you.Message Edited by Damaniscool on 04-2-200707:29 PM

do you hear a sound from the hard dri've like it's stuck? this is common. if so, please search this forum for "hard dri've whack" or "percussi've repair".

Zen Micro Photo bugs need to be worked out - firmware update comi

Hi,
I've had my Zen Micro Photo 8gb for a month & have discovered some interesting quirks: first, I don't believe mine is defecti've, though I've had problems. I have encountered freezing on both the "Zen Microphoto" logo and "rebuilding library" screen; I scoured this forum and the Knowledge Base for answers, trying all that seemed applicable?- I tried disk cleanup and reboot (leading to rebuilding library freezes), reformats & carefully reloading the latest firmware?a couple of times. I've drawn some conclusions:?) Mediasource software is not working for me; when I switched to using only Windows Media , most problems went away.2) For whatever reason, "rebuilding library" can only be accomplished while my Zen is connected to the computer - should this be the case?3) It seems like the times my screen freezes on the "Zen Microphoto" logo I may have held the "on" switch to the side a little longer than necessary; I'm wondering if this is happening because I'm holding the switch on a little too long?Anyway, I love the size, look and sound of this player, so I hope to keep using it. NOTE: can anyone from CREATIVE tell me if there will be future firmware updates? Thanks
!!! Steve M.Message Edited by smills on 08-0-20070:24 AM

I run windows XP pro . sp2, its quite strange.. it should work. ! **bleep** IT SHOULD WORK ! :smileyindifferent: , and the wirld thing is. i also try'ed it on another windows XP machine at work.. and it didient work there either. im beginning to question if this is the product for me. its realy sad though, i love the zen design.. not to mention the price.
It realy realy bugs me that the zen micro photo isset supportet on windows 2000, i had this vision of syncronizing my work calender with the zen ... and now its just not possible ! unless my boss wants to give me a new laptop.. and i dont think that will happen . hehe
Well i will keep on working on this issue.. ill let you know guys.

Using Zen Micro(Photo) with plain Explo

Is there a possibility to copy MP3 files simply by drag-and-drop with the Windows Explorer to the Zen Micro(Photo) so that the files are treated as MP3 and NOT as simple data files? Technically it is quiet simple to do this by using the hard disk of the Zen as an extra hard disk in Windows. Even the cheapest USB-stick based MP3-player can do this. Why not a Zen (or the iPod competition)?
I refuse to use any specific software to copy my self ripped MP3-files because I know that that software (Creative, iTunes, even Windows Media Player and other) changes things during the file transfer and I don't want any change in the MP3 files, not even a single bit!
I want to buy a Zen Micro Photo (8 GB, color screen), but I refuse to do it as long as it is impossible to crag-and-drop my MP3 files simply thru the Windows Explorer.

Yeah that's what i always did. I just drag and drop MP3 files directly into my player without using any software whatsoever.

Zen Micro photo.....HELP?

<FONT color=#6666ff>ok sooo.... i am an idiot..............one night after coming home i was running to catch a ride with my friend and on the way.....my zen micro photo fell outta my pocket and into the grass..............well the next morning i obviously couln't find it so i got in my car and drove to the place that i got the ride from- well i founf it in the grass. So i was real happy that i found it until i got home and all it does when i turn it on is go to that stupid recovery mode-----and it wont go any where else.......................it doesn't look damaged at all. UGH it makes me real mad some one PLEASE HELP and gimme some suggestions!!!!!ASAP

It really sucks about your player
...but it was concrete.
...and you've got a disk dri've inside there.
what do you think would happen if you dropped a desktop computer from 3 feet off the ground onto concrete?

Micro photo lost installation

Similar Messages

Maybe you are looking for