Micro SD card not being recognized

I've installed a new MicroSD card into my Nokia Lumia 822. I turned on my phone and it doesn't recognize it. So I take it out and put the SD card into my computer and format it to NTFS and return it to the phone. The phone says something like, "This SD card is not in the correct format to be used. To format do Steps 1 and 2" Ok! I have the phone format it and when it's done, it doesn't see the card. To further troubleshoot, I took the SD card out of my old smartphone and install it into the Lumia 822 and it doesn't recognize it.
Anyone else having this problem?
Or
Anyone know the solution? Or is the solution to have them replace the phone?
Burningham

So, what worked, but was a lot of wasted time? 
- You removed any microSD card from the phone, then tested all three computers and all three computers will see the 822's on-board/internal memory storage and you can transfer files from any of the computers to the phones' built in storage. 
- Second:  Then you put a microSD card in the computer while connected to the phone, and then you can move the files from the phones built-in storage to the microSD card.  (Deleting them from the internal storage on the phone?)
- Third: Then when you put the microSD card back into the phone, and the phone does access the microSD card and reads the files.
Is this what works for you?  Did I write it correctly?  Are you sure the files you are reading are on the microSD card and not just the ones in the internal memory?  Did this work with all the cards, newly formated and not?
Thanks for the information.
Is Verizon addressing this?

Similar Messages

  • SD Card not being recognized by ZTE Open (Firefox OS 1.0)

    The SD card is not being recognized by my ZTE Open (Firefox OS version 1.0). I tried taking it out, putting it back in and it still does not work. The SD card is brand new and works in all other devices. I only got the phone and the SD card today so I don't know if it is a hardware issue or if it is a issue with Firefox OS 1.0.

    Hello,
    After reading the information provided about your issue I suggest a soft reset of the phone.
    #Take the back cover of the phone off.
    #Take the battery out.
    #Take the SIM card and microSD card out (if applicable).
    #Wait 10 seconds.
    #Put the SIM card and microSD card back in (if applicable).
    #Put the battery back in.
    #Put the back cover back on.
    #Turn the device on.
    #Check if the issue you were having is still present.
    Please report back to us if this solved your problem!
    Thank you

  • ESATA PCI Express card not being recognized

    I have a Macbook Pro Intel Core 2 Duo 2.8 GHz and I'm having trouble getting an eSATA PCI Express card to be recognized in either MAS OS X (10.5.6) or Win XP SP3.
    When I plug a FireWire PCI Express card into the slot with a drive attached it gets recognized right away but the eSATA doesn't.
    I can go into the system profiler when the card is plugged in and MAC OS X sees the card but the drive doesn't get mounted, or there is no prompt for me to initialize the drive (if it's a new, non-formatted drive). I've tried installing the driver that comes with the eSATA card with no change.
    Does anyone have any ideas as to what I can try?

    Does anyone have any ideas as to what I can try?
    Hi,
    Typically, this type of issue is caused by an incompatible enclosure or a card problem.
    Please provide a link to the card and the enclosure for additional help. If you need an ExprressCard/enclosure combination that works I would suggest FirmTek.
    http://firmtek.stores.yahoo.net/sata2ensm2e.html
    http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/2en2/
    Have fun!

  • SD card not being recognized

    How do you I get my Tungsten E2 to recognize an SD card?  I have tried it with a standard SD card but it still says there is no card in the slot. What do I do?
    Post relates to: Tungsten E2
    Message Edited by FNG1 on 01-28-2010 09:31 AM
    This question was solved.
    View Solution.

    The following Palm KB article lists the maximum card size for Palm devices:
    http://kb.palm.com/wps/portal/kb/common/article/34​080_en.html
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • SD card not being recognized - DROID Charge

    This error has happened to me too.  Has anyone got a definitive answer as to whether this is a phone ("Charge") issue?   My memory card just stopped working.   When I pull it, use an adapter, and stick it into my laptop I can read it fine.  I've backed up everything on it.   However, if I put it back in it doesn't work.   I've pulled the battery.   It still doesn't work.   I reset my device back to factory settings ("Grrr.. because I lost a lot of apps and customizations"), and it still doesn't recognize the card.   I went out and bought a brand new sd card (SanDisk Ultra 32 GB MicroSDHC Class 10 UHS-1) and it still doesn't recognize the new one.   
    Does anyone have any other options instead of having to buy a new phone?   I like the Samsung Charge, but so many of the apps I use weekly, if not daily, require a memory card even to work.
    <Branched to a new discussion for more exposure.>
    Message was edited by: Verizon Moderator

        Hello JChambers,  I appreciate you taking so much time and effort to troubleshoot the device!  I apologize for the delayed response.  I would like to take a closer look at your warranty options and work towards a solution.  I have sent you a Follow request.  Please accept and send me back a Direct Message with your account information.  I am eager to get this resolved!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Media card not being recognized by Media Sync / Dekstop Manager or Windows

    I hope someone can help me with this.
    I've got a Bold 9000 running OS 5.0.0.411 (the Vodaphone offiical release, not the Bell one).  I'm on Rogers though.
    I have an 8GB Sandisk card in it which the phone reads fine.
    However, Media Sync, Desktop Manager, and Windows 7 64-bit wont read it.
    I've done the following to try and fix this:
    - Mass Storage Mode Support is "on", doesn't help
    - tried reformatting the media card through the phone, doesn't help.
    - tried reformatting the media card through Windows, doesn't help.
    - tried uninstalling Desktop Manager and just installing the USB drivers, doesn't help.
    - tried re-installing Desktop Manager, doesn't help
    - tried updating the "RIM Blackberry SD USB Device" driver, no change as Windows says it has installed the right version.
    - tried both versions of Media Sync (older and just released version), doesn't help.
    - tried another SD card, doesn't help.
    - under Computer Management > Disk Management, the SD card shows up, but with no drive letter assignment.  If I try to assign one, it doesn't work.  Basically if I check anything but "Properties", it tells me there is no drive there.
    Does anyone have a suggestion to fix this or should I reload the older OS?  Admittedly, I don't know if even that will help because the last time I ran Media Sync on my phone was when I was running Vista so maybe it is not the phone but a Windows issue.
    Any suggestions would be appreciated.  Been searching for the last two days and can't seem to find an answer.
    Cheers.
    BB-past: 9000>9700>9800>9780>9810>9900>Z10>Q5

    Me too:
    BB Pearl 8120 (OS 4.5.0.124)
    Windows7 Pro 32bit
    BB Desktop Mgr. 5.0.1
    Reading/accessing the media card via USB always worked fine in XP, and still works fine in Ubuntu Linux (I could never get Bluetooth to do it at all). With the Windows7 upgrade, suddenly Windows can detect but not read the card. It's detected as a removable disk in Explorer, but when you try to open/browse it, Windows throws up a dialog that says "Please insert a disk into removable disk (F."
    The phone sees it just fine, XP sees it just fine, Ubuntu sees it just fine. It's more likely to be a Microsoft problem than a RIM problem, but it's still friggin' annoying. Does anyone know a workaround for this? The Desktop Manager software won't run under WINE for me.

  • AirPort Extreme Card not being recognized

    I installed an AirPort Extreme Card into my powerbook G4 15" laptop. I also installed the software from the CD that came with the card. Everything went just like the instructions set out. When I start my computer and go into the system profiler it doesn't show that I have an airport card installed. Also if I launch the AirPort Setup Assistant it claims I have no card installed.
    How can I determine the card is installed correctly and working?

    Which PowerBook G4 do you have?
    Some PowerBook G4s require the original AirPort card.
    Others require the AirPort Extreme card.

  • SD Card not being recognized by macbook air. what do i do?

    I have a Nikon D5100 and i was taking some photos and videos outside. so like any other person, i put in the sd card into the slot, but it doesn't recongnize the sd card! this is really annoying me. also, the camera-to-computer usb isn't working either! it was just working last week so what's the problem?

    Another thing that might help is to open the Image Capture app.
    It is in your Applications folder.  You might try opening the app yourself, then inserting the SD card.

  • Micro SD card not recognised

    I have a 32 GB Sandisk Micro SD card. After DP 8.1 it was not being recognized in my Lumia 525.I had forgotten to remove my SD card during the update. Now it is not being recognized in any device. I have tried in a SD card reader, Samsung Galaxy Pop, Lumia 520, Nolia 2700, Nokia 6630 and Nokia 5800.
    I had a similar issue in the same SD card on Samsung Galaxy Pop, when I removed the SD card without dismounting it. It was locked to that device. I don't remember how I got it working again. I think I just put it in the same device and it started working again.
    I have restored my Lumia 525 back to WP8, but it is still not recognizing my SD card.
    Also I am unable to download games such as Asphalt 7 and NOVA which I got free as a promotion while buying the phone. Previously if I click buy, It used to say that you already own this game and I can download. Now It says that This game is not available for your device.
    Please help.

    Hi, Wildsdi. Welcome to the Nokia Support Discussions. For your MicroSD card concern, have you tried using another SD card on your phone? This is for us to isolate if this is an accessory-related. As for the apps, are you referring to the Gamesloft app promotions? Where do you see the error and how are you trying to reinstall them? Is it via the website (windowsphone.com) or through the Store app? Since this promotion has ended, the Store will require you to purchase them again.

  • The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Video Ipod 80G 5th generation not being recognized by computer or  itunes.

    My ipod is not being recognized by my computer or itunes at all. I bought a new cable and nothing happens as well. however when i connect it in my car it works fine. did any resolve this issue? I am not sure if its the new software that has the issue but i am almost certain it is.

    Many people are reporting problems with connecting there fifth-gen iPods after the update to iTunes 9. I had the same problem, and when I downgraded to iTunes 8, everything worked again.
    I tried cables, resetting, and all the other steps. My solution turned out to be iTunes 9 itself.
    My problem came from using a replacement hard drive-an adapter that allows me to retrofit my iPod with a Compact Flash card instead of a hard drive.
    The problem is NOT the adapter. This system functioned perfectly until iTunes 9, and when I switched back to iTunes 8, it worked again.
    Summary: I have a modded iPod, and it consistently works with iTunes 8, but not iTunes 9.
    Reason: Apple is sooooooooooo afraid a Palm Pre user will be able to use iTunes that they are breaking the sync code on purpose.
    Downgrading iTunes:
    1. find the download of iTunes 8 for your OS. (not posting links, as they may change)
    2. go into your iTunes 9, and export EVERY playlist to a text file. This is the only way to preserve your playlists.
    3. Uninstall iTunes 9 from you computer, install iTunes 8.
    4. Configure iTunes 8 to use your music folder (especially if you moved your music to a different location other than the default)
    5. Add your music to iTunes-this may take awhile.
    6. Import you text files and your playlists will return.
    7. Backup your iTunes 8 library files.
    Happily enjoy your modded iPod. Mac Users: Don't accidentally install iTunes 9 from an Apple Update.

  • Canon G9 not being recognized by MacBook Pro

    I'm having some issues with a Canon G9 not being recognized by the particular MacBook i have to use. When i connect the G9 via USB (obviously with a good cable and camera switched on) neither Image Capture nor iPhoto recognize it. I have tried connecting the camera to a bunch of other macs (Powerbooks, latest MacBook, same model of Macbook and system as the one I'm using), they all didn't have any trouble recognizing the camera. My MaProxy-Connection: keep-alive
    Cache-Control: max-age=0
    ook can see any other camera I have tried without trouble... I'm using 10.5.6...
    The System Profiler does actually see something being connected via USB, but it only shows up as "Composite-Device/0x04a9(Canon Inc.)".
    Any ideas what might cause the issue?
    Message was edited

    Updated information ... these card do get read on an older iMac, circa 2010 or so, also running 10.8.4. For some reason, they're not being read by the internal SD reader on the macbook pro. Odd.

  • ATI RX3850 not being recognized

    Hello.  I've been having some problems getting my comp to recognize my new ATI rx3850 graphics card.  I am using a Dell Dimension C521 with a Dell 0YY821-A00 motherboard.  I install the card in a PCI expressx16 slot, but when I open device manager and search the card I cannot find it.  I previously used a NVIDIA 7 series card in the slot with no problems.  I recently flashed the BIOS and looked at BIOS settings but I cannot figure out why the card is not being recognized.  Could the card not be compatible?  I would be thankful for any suggestions.

    Quote
    I previously used a NVIDIA 7 series card in the slot with no problems
    Which one exactly?
    Dell PCs are cheap because they use cheap and nasty components. My guess is that the PSU isn't up to the job, you were probably lucky that your 7xxx card worked at all.

  • MSATA card not being reconized on X220 - Help

    Lenovo x220
    Winodws 7 64bit, up todate
    MyDigitalSSD Super Cache2 50mm SATA III (6G) mSATA SSD
    I have installed my mSATA card as instructed and that part went fine. Like a couple of other folks the drive is not being recognized by Windows 7. I have checked the storage management in windows 7 and the drive is not there in any form. I have disabled all caching as suggested in some posts in the polices for the drive in windows 7. Again no drive being recognized.
    Any help you could provide would really be appreciated.
    thanks
    Solved!
    Go to Solution.

    Thank you for the threads, they were helpful. A combo of BIOS upgrades and harware tweaks.
    All is up and gonig now and very, very fast.
    Thanks for the assitance
    cheers

  • X-Fi not being recogni

    I bought an X-Fi yesterday with a 5. speaker set up, only the X-Fi is not being recognized. it is an X-Fi Xtreme music, i put it in my PCI slot, space away from my graphics card, and it is connected to the power supply in a 4 pronged slot. It is not showing up at all, i have disabled the onboard sound in bios, and tried disabling the 934 slot or whatever, and no luck. when i try to install the firmware/drivers for the card, It says no unrecognized products.Message Edited by popshuvit3 on 0-30-2005 0:46 PM

    Well my board only has a total of 2 PCI slots, below a PCI-e slot that is occupied by my x700 graphics card. It says in the manual and on the knowledge base to keep it one slot away from the graphics card so both can get enough ventilation. The slot in between the 2 is open by the way. Im going to call creative labs today to see what they have to say.
    I just think its weird because the first time i installed it i didnt connect it to the PSU. I placed it in the slot away from the graphics card, like the manual says. I powered up my computer, and waited 5 min for it to be recognized, because usually plug and play is immediate. Then i decided to just try to install the X-Fi drivers, and then it comes up with this screen saying "Setup is unable to detect a supported product on your system.Please ensure your product is properly installed before running this setup program. Setup will exit."Message Edited by popshuvit3 on 0-3-2005 02:50 PM

Maybe you are looking for

  • Short dump in bapi

    hi gurus,        i have a z-bapi (Z_BAPI_SB_SALESORDER_CREATE), where i added some import parameters(z-fields), i need to populate these fields on the sales order screen 'additional data B'.. In the structure bape_vbak which in turn has a append stru

  • How to Connect to Connect to HDMI

    How would one connect an iPhone5 to the HDMI port on a TV? Would Anyone who's tried it offer lessons learned? Thanks

  • Help please! Keyboard not working after installing windows XP sp3 on T61

    I just changed to windows XP sp3 in last weekend on my T61. From then on, when I turn on the T61 every morning, the key board is not working, sometimes I could not type password. I need reboot several times to make it work. I installed the keyboard c

  • ESB to BPEL request creatin in jdev

    Hi, Situation: An external system sends a request to the ESB that I am going to create. This ESB transforms the incoming request to a different format and then sends the transformed request to the BPEL (need to create). The BPEL invokes an external s

  • Price conditions in Shceduling  Agreement

    Hi All, I have one query: How to make the price conditions greyed out in Shceduling  Agreement of document type LP? I even tried out making the price and price unit field display in the field selection but was of no use. Any help highly appreciated..