Micro SD Corrupt, Mac OS X Can't Read

So I have a 1GB Kingston Micro SD card that was used with a phone. I plug it into a USB Micro SD reader, and the disk of "NO NAME" pops up. I click to see what's inside, but none of the files are there (or at least visible).
I open up avtivity monitor, and sure enough it shows that "NO NAME" has data stored on it and is almost at maximum capacity.
The files inside the card at this point are useless to me, so I go ahead and open disk utility to try and erase it. I select the disk, name it, hit erase, and shortly after I got an error. I don't remember what it was, but something along the lines that it couldn't erase and their was an error of somesort.
I unplug it, and plug it back into my Mac, and nothing pops up. I restarted the computer, and still nothing pops up afterwards. I try it on my friends Mac, and still nothing.
Then I try pluging it into my BlackBerry Bold 9780, and it identifies a card, but whenever it attempts to modify it, I get an error saying it can't. I tried to format using the BlackBerry, but I got another fatal error. I tried to repair it too, but also got a fatal error!
How can I get the card working again? If I can't, please let me know ASAP please. Any ideas or suggestions would be appreciated, thanks!
- Ale47099

I don't have the camera with me right now but first of all, I really doubt manufacturers of cameras also make the SD disks. Second of all, and I'm less sure about this, this seems to be a problem with my laptop and OS X, not the disk itself.

Similar Messages

  • My Mac OS X can not read PDF stored in USB which scan in 7-11 IBON

    I have 7-11 IBON scan a document and put into my USB as PDF.  I can not read the PDF by my MAC so I went to a Internet cafe and used their computer to read my document in USB, I have no problem read my document in Internet Cafe at all. What should I do to make my Mac can read the document in USB?

    Hello, not your fault, but when you use Paste instead of Paste & Match style, this forum makes it really hard to read the log.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • USB disk with Lion recovery partition + storage partition shared by Mac & Windows: Windows can't read it.

    I have a Lexar Express Card flash drive (16GB). It works the same as any USB flash drive.
    I use it to move files between Mac OS and Windows 7/Bootcamp: Drag files to it in one OS, reboot in the other OS, take the files back off.
    Recently, I discovered the Lion Recvoery Disk Assistant, which allows you to create a Lion Recovery Disk on an external drive (just in case). So, I decided I would use a ~1GB partition on the express card for the recovery disk, and leave a ~15GB partition for the same file sharing I am used to.
    This setup requires that the disk use a GUID Partition Map with a HFS+ file system for the recovery partition, and I use a FAT32 file system for the shared partition. The partitioning was done in Mac OS Disk Utility, and then I think the Recovery Disk Assistant modifies it further by adding an EFI partition.
    When I try to access the disk in Windows 7, it says it needs to format the drive first (which it shows to be a ~200MB "volume" on a disk with ~15.4GB "capacity"). From what I have been able to find on my own, Windows 7 should be fine with a disk using a GUID Partition Map, and both OSs can use a FAT32 file system. So why does Windows only see the 200MB EFI partition at the first section of the disk, and not the other partitions, particularly the FAT32 file sharing partition?
    The last thing I will mention is that the disk is being seen by Windows as a MBR/Master Boot Record partitioned device. I'm assuming this is the GPT/GUID Partition Table's protective partition's fault; the one MBR partition that keeps the GPT partitioning safe from software that doesn't recognize or know about GPT.
    I'm asking on the Apple discussions because it's in Boot Camp and I'm primarily a Mac user. If anyone knows a better, Windows-focused place to ask, please say so!

    You really need to search first as there are A LOT of post's with the same question. Different issues with different Models.
    What model/year do you have and what OS were you using first? Snow Leopard (10.6) is the last one that came with a CD/DVD with the computer.
    You insert the disk when it's done installing W7 and reboots into Windows then you insert the 10.6 MacOS Installer disk for the Windows drivers. Lion does it a different way.
    PR7 wrote:
    ...........because I lost the OS X Lion install disk that came with my Mac)..........
    Lion (10.7) is only a download now, there are no more physical disk's, (unless you pay the extra money for the USB installer thumb drive directly from Apple). So if your computer came with 10.7 Lion installed then you will not have a physical disk. There should be a "Repair Partition" that you use to boot to if you need to  repair or to reinstall the Lion OS.
    PR7 wrote:
    However, when I log on my Windows account and I insert the bootable OS X Lion install disk, Windows doesn't read it. I can't even find the disk in Windows Explorer or even Right Click on the disk.
    Please Help!
    Thank You!!!
    I don't believe the Boot Camps drivers are in the Lion download anymore, ( to keep the download smaller?), the only way you get them now is when you start BCAssistant, it will prompt you to download them onto a CD, or USB drive. You have to download and install the Boot Camp drivers separately. You then insert it when it's done, when Windows boots.

  • MS Word Mac 2008 - How can I read a document written in a Foreign alphabet?

    I have a document written in Thai language that can't be read. Just a bunch of question marks pop up in place of the Thai letters that should be there.
    I have Thai fonts in my Mac in the Font Book, but they are not included in the MS Word fonts. I even tried to move the Thai fonts from the Font Book over to the "Windows Office Compatible" folder (and I did), but they still do not show up in MS Word fonts.
    Is there any way to get foreign alphabets to show up in my MS documents? Thanks!!!!

    Not necessarily open your web browser go to -
    https://www.icloud.com
    Sign in with your iCloud credentials
    Click on the iWork icon
    Then the Pages button
    All your icloud Pages documents appear
    Highlite the document you want to edit and you can download it in  a choice of Pages/Word or PDF formats
    To upload the edited document or any other simply drag the document onto the browser window and up it goes.
    Once uploaded the document automatically shows on all connected iOS devices.

  • I am using a mac and i can't read a pfd file

    i am using a mac and i cant read i pdf file the system want me to agree first on adobe reader agreement but i dont know how

    Open Adobe Reader on it's own (not through a browser), accept the agreement.

  • My brand new Mac book pro can not open some of the new pdf files, i have updated Acrobot reader

    Although i have downloaded the newest Acrobot reader my mac book pro can not read some of the pdf files it says
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.

    It can not open these
    Generic Application Form for Canada [IMM 0008] (PDF, 366 KB) March 2014
    Additional Dependants/Declaration [IMM 0008DEP]  (PDF, 472 KB) July 2011
    Schedule A – Background/Declaration [IMM 5669]  (PDF, 170 KB) December 2012
    Schedule 3: Economic Classes [IMM 0008 SCHEDULE 3] May 201

  • I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows.  How do I get back to Mac so I can have a choice of drives?

      I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows.  How do I get back to Mac so I can have a choice of drives?

    That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
    Allan

  • I have an old Mac G4 that can only be upgraded to 10.4.11

    I have an old Mac G4 that  can only be upgraded to 10.4.11.  I use Itunes 7 and I  have a Classic Ipod that suddenly says it has been corrupted.  If  I  upgrade the software to 2.3 on the Ipod will i be able to access it from the G4 or  will I then have to upgrade  the itunes on the G4,  which I  cannot?  Does anyone have  any suggestions besides getting  a new computer?

    The highest release of a g4 is 10.5 -- leopard. If you meet the leopard requirements.
    http://support.apple.com/kb/sp517
    You can run the latest Firefox with the PPC version of firefox.  Max out the memory on the machine
    TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
    "World's most advanced web browser. Finely tuned for the Power PC."
        --  works for me on 10.4.  Supports 10.5
    http://www.floodgap.com/software/tenfourfox/
    alternative download site:
    http://www.macupdate.com/app/mac/37761/tenfourfox
    Turn on pipelining.  This will allow Firefox to make simaltaneous requests to the server.  Chrome has pipeling turned on. Some sites could fail to load with pipeling set on. The site will be old. See "Increase pipelining" in:
    http://www.hongkiat.com/blog/firefox-optimization-tips/
    OmniWeb uses the lastest Safari framework.  The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit.  The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
    http://www.omnigroup.com/products/omniweb/
    Safari 4.1.3 for Tiger
    http://support.apple.com/kb/DL1069

  • I have a corrupt email, that I can not delete via normal actions.  How can I get rid of this email?

    I have a corrupt email, that I can not delete with normal actions.  How do I get rid of it?

    The email was recieved from Fidelity (whom I get 1000's of email from.  The eamil account is an msn account that has wooked flawlessly for years.  The email deleted from my msn account on other computers, it is only on my Mac using my the supplied email viewer.  The message is :  Can not move this email to trash.  Input output error.

  • When saving an downloaded pdf-fil, the saved file is corrupt (empty?) and can´t be opened. Happens all the time nowadays, never before. Its a mess. Please advice.

    When saving an downloaded pdf-fil, the saved file is corrupt (empty?) and can´t be opened. Happens all the time nowadays, never before. Its a mess. Please advice.

    Hi Melbus_SE,
    Are you downloading files from your Acrobat.com cloud storage? If so, what browser are you using, and are you on Mac OS or Windows? Has something changed on your system since you were able to download/open PDF files successfully? What version of Acrobat or Reader are you using to open these files?
    Sorry to ask so many questions, but your answers will help us get to the bottom of this issue.
    I look forward to hearing back from you.
    Best,
    Sara

  • Corrupted ipod... can't restore?

    okay, so ill try to provide as many details as i can.
    i've got a 30 gig ipod video. i've had it since christmas 2005.
    yesterday, it suddenly froze, so i restarted it, and the unhappy ipod symbol came up. it was also making a weird clicking noise. i was in florida at the time, but i came home, and it kept doing the same thing. then i charged it, and it would switch on and off between saying "wait a moment, critical low battery" and the unhappy pod symbol.
    now, when i connect it to my computer, the ipod screen says to restore it, and "corrupted ipod found" comes up in itunes, but as soon as i click okay, the page with the ipod options (restore & etc) dissapears, before i can click restore. ipod updater says "invalid ipod service version" so i can't do it that way... please help?

    You may need to fix your iPod with another computer .... but have a read the following first
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

    Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
    == This happened ==
    Every time Firefox opened
    == I tried to update firefox add-ons ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Try a new profile. See [[Recovering important data from an old profile]]

  • Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

    following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

    Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

  • My mac. com email can no longer be collected.

    Since I upgraded to Mavericks, I have lost the ability to collect email from my secondary mac.com account. I can still read by signing into iCloud, but not in Mail. The settings were automatically entered for me and are greyed out, so I can't change them.  Any ideas on how to solve this problem? They would be appreciated.

    Troubleshooting is a process of elimination.
    Eliminate Mail
    A few users have issues like this where Mail simply fails. You can eliminate Mail as the source of the problem by testing in Postbox and MailMate. Both have demos. If your account fails to connect in another source, then the problem is with account or an issue on your Mac.
    http://www.postbox-inc.com/
    http://freron.com 
    Thunderbird is also a free email client you can try.
    Eliminate your User's folder
    CREATE A NEW USER
    Go to System Preferences --> Create a New User in Users & Groups (Accounts. in SL) Switch to the New User by logging out under the Apple in the Menu Bar.
    Do you still see the issue?
        If yes, then the problem is with your base files.
        If no, then the problem is in your User's folder.

  • I have an external hard drive, from Iomega. However, I cannot copy or save any file to it. On my PC it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?

    I have an external hard drive, from Iomega. that I can open and see my files. However, I cannot copy or save any file to it. On my PC I have it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?
    Also, Im a photographer, so I like to name a lot of files at the same time (used to do in on PC and it was very usefull.) cannot find out how to do it on my Mac. Really appretiate if some one can give me a solution! Thanx

    Your drive is formatted with the NTFS file system.  OS X can read but not write to the NTFS file system.  There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition.  I have not tried them and don't know if they work.
    The only file system that OS X and Windows can both write to natively is the FAT32 file system.

Maybe you are looking for