Micro SDXC 64GB compatibility with Libretto W100?

Hi, is a micro sdxc 64gb compatible with Libretto W100?
Rgds.
Message was edited by: massimod1d1

Thanks.
I already use a micro sdhc 16gb.
I would like to exchange it for a bigger and I have to choose between a micro sdhc 32gb and a micro sdxc 64gb (if compatible).

Similar Messages

  • Sim not supported,but was sent micro sim thats compatable with iphone ..now what?

    Have iphone 4 with no sim card. so contacted vodafone whom i have a contract with and arranged to transfer my existing mob num to a micro sim card to use in apple iphone4 . Once received connected to itunes .. picked up the iphone but said iphone was in recovery mode and click on restore. I have done that loads of times now and everytime it ends saying your sim is not compatable. Rang Vodafone as was so cross as the sim also wouldn't work in my old phone either ! even when clicked into the normal sim sized card.
    Anyway , that was yesterday and was told don't worry your micro sim isn't activated correctly yet ..remove sim .. wait 24hours ,put sim back in and it will work . well it hasn't made the slightest  bit of difference except when i put the microsim back in old phone .. it now works on that!
    can anyone tell me have i done anything wrong? ... do i need to download any software first ?  Would it make any difference if itunes were already installed on home pc to under my partners name? .. I have tried installing itunes to link to just me but thats just reverting back to itunes already installed !
    if i took to a mob shop .. could they help ?  hope someone can give me some answers  

    Where did you get the phone. An "unsupported SIM" message indicates the phone is locked to a carrier other than the one you are trying to use. ONLY the carrier it is locked to can authorize unlocking it. DO NOT take it to a mobile phone shop that tell you they can unlock it. They can not legitimately do so. All they can do is hack/jailbreak the phone. This will void any warranty as well as forteit your right to support from Apple or on these forums. It can also cause stability and security problems and you will NOT be able to update the OS without re-locking it.

  • My Sandisk Ultra Micro SDXC 64 GB stopped working properly

    I have a Sandisk Ultra Micro SDXC 64GB card which I use in my Samsung s4 phone for adding lots of music.  All has been working fine for 18 months or so.  I load / remove music onto it using Windows Explorer. Then as of this week I couldn't copy new music onto it, nor could I delete old stuff.  Or actually it seemed I could (it looked like all had been done fine, but then a few hours later it restored itself to its original state: with the old music still on, and not the new music).  I went through this quite a number of times coz I thought I was going crazy.  Anyway I finally realized I was not when playing a new song actually played one I had supposedly deleted.  So I realized the drive had got its directory file allocation tables screwed and probably needed to be reformatted. So I tried this using Windows.  However Quick Format failed, so I tried the full version.  Well after waiting 30 mins or so (grr) it finally said it cannot complete the formatting process ("windows was unable to compete the format").  So I downloaded SDFormatter to see if this would help.  But trying to format with that, I just got the error: "The Memory Card is write-protected. Please release the write protect switch".  But it is not, I set the write-protect on the card adaptor 10x to forward position.  So then I tried another card adaptor, but no luck here.  (I also tried this with another micro SD card on the same adaptor, but did not get this error) I thought then to try chkdsk /f h: from the command line, but I got the really useful statement:"The volume has been successfully checked, but Windows was unable to mark the volume as clean.Windows has checked the file system and found no problems." No viruses found either.  Has this card just died?  Or can I use some other method to reformat it?

    Hello, in that case the card seems to be write protected, in that case there is nothing you can do and the card needs to be replaced. So you can go to the place of purchase and replace the card or you can replace it directly through Sandisk under this link http://kb.sandisk.com/app/rmaform  

  • FORMAT 64GB MICRO SDXC PROBLEM

    I can't format  64GB micro sdxc  for window xp, i try windows update for exFAT,but still have problem,error message is windows was unable to complete the format.I try use windows 7 32bit or 64bit  to format still have problem.

    TL;DR - skip to the last line. How stupid of me. I bought two SanDisk Mobile Ultra 64GB USH-I cards. I find SanDisk to be a very reputable brand - I haven't had any problems before with USB flash drives and other MicroSD cards. In fact, I've only ever used SanDisk MicroSDs. I have a 64MB (yes, megabytes), two 2GB, a 4GB, 8GB, 16GB and a 32GB MicroSD card, all of which perform very reliably. This streak was broken when I intended to purchase one for my phone and one for my tablet. Initially all was fine with the cards; they both mounted properly, were formatted using exFAT by default and showed a 59.46GB capacity. Misleadingly enough, SanDisk's 64GB "Mobile Ultra" MicroSDs don't actually work on any Android device. They only work on a select few, namely those with unlicensed exFAT support such as the Samsung Galaxy S3, Note 2, Note 10.1 and various others. Knowing exFAT doesn't work on either of my mobile devices, I then proceeded to format one of my cards to FAT32 so it would actually mount in my devices.  The first card died immediately when I inserted it into my Samsung Galaxy S2. My phone would say "Preparing SD Card...", then it would disappear very soon after. The card still showed up on my computer, so I tried to format again. Windows said that it was unable to complete the format. The card disconnects itself whenever I try to format it or copy files onto it. I have tried multiple readers, multiple computers and multiple OSes, all of them yielded the same "Automatic Unmount Syndrome". So, I sent this one for replacement. The second card I didn't risk formatting to FAT32. To my surprise, my second device, the ASUS Eee Pad Slider, could mount and read the 64GB exFAT card. I then copied about 30GB of data to it, all seems well. The card didn't disconnect itself, so I tried to copy more data onto it. But the second time I connected it to my computer, it suddenly switched to read-only mode. I couldn't rename, delete, move or copy any files on the card. So I had no choice but to format it again, but this time to NTFS. I could copy data to it, but it wasn't detected by my ASUS Slider. This is unexpected, because the Slider can mount 2.5" portable external hard drives formatted to NTFS. So I format it to FAT32, and copy the data once again. Luckily for me, the card didn't disconnect itself. My luck soon ran out when the card wasn't detected by my Slider (again), but this time it was much worse than my two previous attempts. I formatted the card to its default filesystem exFAT, but this time when I started copying my data, it disconnected itself in the same way my first card did. Formatting it will show the error "Windows was unable to complete the format". No third party formatting software could format it. That's the end of the road for both cards. So from personal experience: The SanDisk Mobile Ultra 64GB UHS-I MicroSD cards have a 100% failure rate within the first 5 file operations. Do not buy.

  • Can the Droid Charge read/write 64GB micro-SDXC cards?

    Can the Droid Charge read/write 64GB micro-SDXC cards?
    (or any micro-SDXC card, for that matter)
    Thanks in advance!   

    Hi SandraW,
    Thanks WCMack for your posting. I have been able to verify that the Samsung Charge has an onboard memory of 2GBs and a capacity to carry a 32GB memory card. It cannot old a 64GB card. I hope this helps. 
    Thanks and have a great day!

  • Libretto W100-D10 - Change OS language from Italian to English

    Hi,
    I have a Toshiba Libretto W100-D10 which have an Italian version and would like to set it up initially into
    English.
    Any help or infos appreciated, thanks.

    Hi
    As far as I know the Win 7 Home Premium was preinstalled on this notebook.
    The OS language cannot be changed in Home Premium version.
    Only the Enterprise and Ultimate editions support the Multilanguage pack.
    So wither you would install a English version of the Win 7 Home Edition on your W100 or you would upgrade the Home Premium to Enterprise or Ultimate version and then you would install the English language pack

  • Z30 - Music & Neutron App do not see music files in micro SDXC card now and then

    I have my Z30 about a week now. So far so good. This morning, all of a sudden the native Music & Neutron App do not see the music files on the 64 GB micro SDXC card. The files are there when I checked with file management. I restarted a few times and the problem went away. I like to know if any one of you out there encountered this problem and how do you resolve it.
    Thanks.

    hi i had the same problem i asked an expert and told me the connection between card and phone was not good at the moment took it out and put it back didnt have a problem ever since

  • Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit.  I have the iPhoto app but pictures not being seen on iPad.  So incredibly frustrating.  Apple please fix this.

    Do you have a smaller capacity micro SD card to try? I seem to remember from past posts that users were having problems with cards larger than 32GB, however, Apple's page doesn't mention this.
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
    What format are the pics - jpg or raw?
     Cheers, Tom

  • What cameras are compatable with the SD card accessory?

    Is there a list of cameras that are compatable with the SD card attachment?

    The camera Connection kit has two parts, one is the SD card reader. The SD Card Reader supports SD standards up to SDHC, miniSD and microSD with adapters, and MMC. SDXC is not supported.
    The second part is an attachable USB port. Most digital cameras with a USB cable should work with the iPad.

  • Libretto W100-10D - 3G SMS utility program on wireless manager application

    Hi all staff Toshiba
    I'm very surprised to check new release program 3G and particular SMS utility because, about twoo week ago i've downloaded new release 3G application and i've found one problem on my PC about functionallity of this application i can't send SMS because operating system Windows 7 detect an error when inizialize this procedure.
    This situation is very curious because when i've started to use this program everything worked properly and then suddenly stopped with message error that inform me that this program doesn't work because occur an error operating system .
    I would' like to know if there are any problem with new release SW 3G with any particular model Toshiba like Libretto W100 10D otherwise i can unistall new release and install old release that i've never encountered any problem.
    Thank you very much

    So long you dont have problems with old version use the old one.
    As you know Libretto is exotic product and I dont think many people have it but lets see if anyone else has noticed the same problem.

  • Libretto W100: Blio software - wrong format & text isn't limpid

    Hi
    i'm trustworthy client Toshiba because i think is fantastic farm and wide industry electronics producer but i'm very surprised when i' ve bought W100 libretto model last week.
    I've tried to install *BLIO* SW for because i would like to use this model like ebook reader in dual screen mode.
    This new philosophy machine i think is right for this use but i think there are a lot of problem to achieve success.
    In this particular plan of operations i have seen that there are two essential problem;
    - first there is not right format layout of page on display dual screen mode and
    - second the text font i think isn't limpid like windows .
    Thank you for your kind attention

    Hi
    I think Libretto W100 is a great device with the dual 7 displays. It can be used for different purposes and not only for ebook reading
    However, I think there are different applcations on the market which can be used for ebook reading and I think your feedback is related especially to the Blio software.
    I cannot say anything about this tool. I dont use it.
    However, your feedback is very interesting. Thanks for sharing this in our community.

  • Libretto W100-10D - What software is needed to use GPS

    Hello
    i've any question about this device and exactly i would like to know if is possible install in libretto W100-10d any particular SW that use potential board installed on it.
    This model has one feature board Erickson F3607 model to use this device like 3G network and also has GPS but i don't know how is right SW to use map like Garmin Tom Tom or other.
    thank you very much

    I have checked specification about your Libretto and WWAN card F3607gw is defined as GPS supported so you asked really interesting question here.
    Unfortunately following Toshiba support page I didnt find any software recommendation.
    Im not expert on this but there must be some software designed to be used with Win7 and has control over this GPS functionality.
    Try to talk with your local dealer or mobile phone experts. I think they have good experience with this stuff.
    If you will find solution please let us know. It can be very useful info for other Libretto owners.

  • Windows 8 and itunes 11 compatibility with an ipod

    I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8.  This was months ago.
    I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
    I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
    If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
    Kia
    [email protected]

    Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

  • Is adobe photoshop cs2 compatable with windows 8?

    Is adobe photoshop CS2 compatable with windows 8?

    I have removed and re-installed CS2 twice now and still get the same library application error.
    DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
    Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
    Thank you,
    Eric

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

Maybe you are looking for

  • Safari won't open after updating to 6.0.3

    Hey, after I had updated my Safari to the latest version (6.0.3), Safari is unable to open itself and shows an instant crash window after clicking on it. I have deleted my extensions already, but that didn't help. I was hoping if someone would be abl

  • PDF-attachments (bug report)

    Hi, when I receive an email with an attachment in PDF I can read everything without problems. After I have forward this email I cannot read the attachment of the original email anymore. I can only see a small pdf icon if I open the attachment. Graefe

  • Stuck on the restarting page. What do I do?

    My Macbook air is trying to restart after installing the messagesbeta program. Now it's stuck on the restarting page. What do I do?

  • OBIEE 11.1.1.6 not installing on RHEL 6

    Hi, I'm not able to install OBIEE11.1.1.6 on RHEL 6.It says required packages are missing. I have installed all the necessary packages needed But still not able to succeed.Please Help me out. Thanks In Advance Janani

  • Can't Import Aperture Library

    I am trying to import my Aperture Library into Photos.  I open Photos and select the Aperture Library and the conversion starts. After about 1 hour the conversion stops at 69% and an error message appears.  See attachment. Second question.  When I mo