Micro Sim Not detected on alpha device.

Hi , I have just purchased aircel microsim . The sim is not detecing in BB10 alpha device. could you please any one help me . How it would be resovle. so that i can use mobile network on BB10 alpha device.
Regards,
Vikas V.

It's not true. I repair my device and microsim Tim (italy) work
If U like my post click on LIKE

Similar Messages

Micro-SIM Not Detected

Greetings,
Today when I went to switch my PlayBook from Wi-Fi to 4G I got a "Micro-SIM card not detected" icon when I tapped the Wi-Fi icon in the status bar:
It was working the day before. Any idea what would cause this? How can I fix it? I've already tried restarting.
Thanks,
Shane.
Z10 STL100-3 (version 10.3.1.2708)
LTE Playbook (version 2.1.0.1917)

Hello SGoodman,
Have you attempted removing and reinserting your SIM card? If so, do you have access to another SIM card you can test in the device?
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Q10 Sim not detected problem

Hi all,
i have problem with my BlackBerry Q10 device. It "lost" SIM card. Sound confsed, but I got message like: "No SIM card detected" while using GPRS. Restart or even force power off (take off battery) won't fix problem. Only solution which fix this problem is get batery out, remove and place SIM in socket and boot phone. Sometimes, I need to boot sistem like 5 times before it recognize SIM. Same SIM card work fine on other device. Also same happens on my Q10 with different SIM. Anyone have idea how to fix this problem?
Thanks.
Imprisoned for a 10.000 years. Banished from my own homeland. And now you dare enter my realm! You are not prepared ...

Having the same problem. Purchased my Q10 SIM free from UK. Phone worked fine for 3 months and then for no obvious reason displayed SIM not detected Searching for network.
Checked my SIM (a micro-sim) in other phones. SIM Worked fine and detected.
Checked other SIM’s in my Q10. Other SIM’s detected with my Q10.
Tried again, but the Q10 just won’t detect my SIM.
Battery out, SIM out, wiped with dry cloth, blown on it, restarted, deleted old apps, deleted new apps, upgraded software, still no luck in recognising my SIM.
Then for no reason it flashes and asks for my SIM password. Phone works fine for a few hours and then suddenly SIM not detected again.
Forum research shows others have had the same problem but no answers have come to light. I carried out a security wipe and still no success in detecting the SIM. I gave the SIM another wipe with a soft cloth, this time it was detected but only for 10 minutes.
Restored back up. Still not working. Sent twitter message to BB support.

Zen Micro is NOT detected by Creative MediaSource Organizer or Windows Media Pla

Well, I have read through a good part of the message forum and have found nothing to help my case and I believe, truly believe that I have tried everything!

My Zen Micro is detected by my computer and when plugged in I am prompted by MTP Media Player to
Launch Windows Media Player and synchronize files </LI>
Take no action</LI>

If choose to launch Windows Media Player it does not detect the portable device
If I choose to take no action and launch Creative MediaSource Organizer instead, the device is still not detected.

I have checked my Device Manager and it says that the device is working properly, drivers are installed (this is the most common problem ? but for me this is the part that is working correctly).

When I open the Zen Micro Media Explorer it tells me that the device is not connected. I cannot transfer music files with Windows Media Player or Creative MediaSource because both programs do not detect the Zen Micro.

I should note that the Zen Micro does work properly on another computer in my household.

Can someone please offer suggestions?
Thanks

Ha ha ha! Sucess at last!
I got it working now!
I was missing a step in the second suggestion (link posted by DM) to edit the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB and add "EVERYONE." Plus I didn't reboot right away! I guess that would help too. Sorry forgot to do that.
THANK YOU! The support on this fourm is wonderful! Glad to see the help is here for Creative products.

Wndows did not detect any biometric devices on this computer..

I have an HP ProBook 4540s running Windows 7 Professional w/IE11. I had to do a clean install of Windows 7 Pro and since then I cannot get my fingerprint reader to work at all. In my Control panel, under Biometric Devices, I recieve the message "Windows did not detect any biometrics devices on this computer". However, under Computer , Properties, Device Manager, Biometric Devices, the is Validity Sensors (WBF) (PID=003d).
I have tried to update, uninstall, re-install HP Simplepass, drivers, etc from the HP website, but nothing is working. Also I cannot find exactly what fingerpriint reader hardware is installed on the computer even though it is physically there as part of the original configuration.
I appreciate any assistance in resolving this issue.
Mark

Hello Mark531,
Welcome at the HP forums,
Are you searching for the following driver?
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64338.exe
Winos.
The doors of wisdom are never shut. Benjamin Franklin
We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela

"Adobe Captivate could not detect a recording device ..."

Adobe Captivate shows my Snowflake USB microphone but doesn't record sound from it. When I choose Calibrate I get "Adobe Captivate could not detect a recording device". However, I can record from the microphone in all my other apps (Rosetta Stone, Sony SoundForge, etc.), so I know it's not a hardware issue.
When I go to "Sound" in Vista Pro's "Sound" option on control panel the Microphone is chosen as the default recording device, and I see the bars moving up and down when I talk.
What can I do to get "Captivate" to see the Mic?
A temporary workaround I found is to plug the Microphone into my laptop, then select SPDIF in as the input source. Captivate still gives the "... could not detect a recording device..." error, but the sound records anyway. This is kludgy, however.

Hi there
You may well just be out of luck. I heard Captivate 2 and Vista Pro used together. I don't believe Captivate was fully compliant with Vista until version 3. So that may explain things.
Unless someone pops in with a better idea, you should be able to record the audio separately, save as WAV or MP3 and import into your slides.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Bluetooth did not detect any Bluetooth device even iPhone please help me

I have iPhone 4 my Bluetooth did not detect any Bluetooth
Device even iPhone so I can not transfer any data to other iPhone
Please help me

That is correct.
This has never been a feature of iphone.
Sorry.
Bluetooth is supported for stereo headsets/speakers, telephone headsets/handsfree devices, some keyboards, some peer-to-peer apps from the apps store, tethering where provided by the carrier.
Other than these, it will not connect to another phone/device/computer/etc.

Sim not detected

Hi
i am from iran , My Black Berry Smart phone z10 cannot Dettect my sim
error Name : " sim not detected "
Please Help Me , Tnx .

I have occasionally recieved this message and it's usually resolved by a restart. Very rare though. What model Z10 do you have and what network are you on?

Cd rom not detected in boot device selection list on hp compaq 2230s

Cd rom not detected in boot device selection list on hp compaq 2230s
unable to install operating system please help

Hi,
If the CD/DVD drive is not showing as a bootable device, then it could well be a hardware failure of the drive itself. The first thing you could try is to reset the bios defaults, save the changes and see if this helps. Next, I would check the connection of the CD/DVD drive in case that is the problem.
On the link below is the service manual for your PC. Page 50 explains how to remove, and if necessary, replace the CD/DVD drive. It also has the parts numbers should you require a replacement.
http://h10032.www1.hp.com/ctg/Manual/c01601955.pdf
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Micro Muvo not detected on comuter.

Can anyone please help. I bought my Micro muvo N200 back in late October. I am a novice computer user. I had finally downloaded music onto it after tries from "musicmatch". For some reason now, I want to delete songs from my MP3 and add new one's but now my MP3 is not "detected". I've tried everything to the best of my knowledge and nothing..
Please help.
Albert

Thanks for the response... well the actual mp3 works great. the problem is that my computer or music match do not detect it even after downloading the disc again. I was told to go to control panel, systems, hardware, then to usb... to see if the computer detects it, when i did that there were several usb ports... but there was a particular one where the USB symbol actually had a red "X" going through it as if to say that it's not working. I also tried to download the firmware on the creative website and the response i got was " This device not connected to the USB port" I tried to download unplugged and plugged (the mp3) Thanks for your response and hope to hear from you VERY soon. (tired of dealing with this.. very frustrating )

Zen Micro 5gb not detected w/ USB ca

i just got my new micro and have had no luck getting the usb cable to work.
) i installed all of the spyware-bloated software required to copy music over to the player and found that none of them can detect it. not even the removable disk mode works. (and yes my usb port works - i even tested 2 other computers to see if they would pick it up)
2) after wasting hours of my time going through the forums and reading anything even remotely related to Zen Micro usb problems i finally decided to go into recovery mode and "Reload Firmware."
3) after plugging the player back in to see if it will be recognized by windows and then reload the firmware, it continues to go undetected. (i ran the "Creative Zen Micro Firmware update" with the micro connected through USB and it does not detect it.)
*) concerning the quote about the removable dri've feature
"If you are using a shared computer in school or at the office, and installing Zen Media Explorer is not possible, you can still transfer data files. However, you must enable Zen Micro?s Removable Disk mode when you do this."
since you do not even need any extra software to use the removable disk feature, besides an OS like WinXP, i'm assuming that either the player or the usb cable it came with is busted. in either case i'm planning to get it exchanged for a set that works.
am i the only one who's run into this problem? any feedback/suggestions would be greatly appreciated.Message Edited by assman on 09-2-2005 0:50 PM

assman wrote:Thanks for the information! Quick to the draw and very helpful I'm surprised you're not part of the official customer support team
It would be nice, but they don't have any facility for remote working (I'd have to work from Brazil, my current location). Aside from issues of them actually having vacancies etc. Maybe if everyone sends an email to Sim Wong Hoo.... I'd very much like a job, as getting one here in Brazil is proving impossible for a Gringo like me
Anyway, I hope you get your player replaced ASAP and can get on with the business of listening to music!

Micro-SIM not SIM

Not a great idea buying a SIM card , then downloading the user guide that states a micro-SIM card is needed! Doh!

Thanks! Didn't ask when I bought it , I bought it on-line and didn't see a reference to the sim card type . Oh well! Seems like a great device ...but I have a few things to learn yet! Still haven't got a clue how to download and save documents from the internet (eg pfs), the iCloud feature has worked well with contacts, diary, etc but documents ...that's abiother matter at the moment! :-)

Audigy NX / Win XP not detected as USB Device! Can't Inst

My NX which is under a month old all of a sudden is not being detected by Windows XP anymore. I plugged it in today (it was working fine a few days ago) and it was giving washed out music when playing a CD - like everything was muffled and the bass was dominating. I unplugged it, replugged it in but Windows detected the USB device as "Audigy NX" and tried to reinstall the hardware, but failed, and that was the end of it - It did not appear under my device manager profiles, nor could I get it to work anymore with my laptop. I removed all the Audigy NX software, unplugged everything, went into safe mode and uninstalled the drivers, reinstalled the drivers... what it comes down to is that Windows won't even detect the hardware when I pull the cable out and plug it in again. What do I do when all the drivers & problem solutions are dependant on Windows seeing my USB device. (I even uninstalled the USB roots on my computer and redetected them.. it only found my USB mouse, but no the Audigy NX.) I haven't made any hardware or software changes since I last used it - I have been operating Windows XP Home edition, SP2 with no problems with the NX up until now. Perhaps its a Windows thing, but maybe you can offer some help.
Thanks,
Echostorm

Echostorm
Try doing a Cleansweep for the sound card. This information can be found at the Knowledgebase.
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jason

TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device. The rest of the screen is blank; all menus are blanked out. What do I do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

Flash Builder 4.6 is not detecting my Android Device

Hi Everybody,
I'm making an application for the mobile platform but my Flash Builder 4.6 is unable to detect my Android Device. My Android device is manufactured by Huawei. I happened to visit the following site which displays the certified smart phones.
http://www.adobe.com/flashplatform/certified_devices/smartphones.html
In this list, I don't find my device. Is this the reason my device is not being detected by Flash Builder 4.6?
Please let me know.
Thank you very much.

I see my device there available. Here is the command along the response:
C:\Android\android-sdk\platform-tools>adb.exe devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
4C5499EFF384 device
So, I can see my device in Android but not in Flash Builder 4.6
Thanks

Micro Sim Not detected on alpha device.

Similar Messages

Maybe you are looking for