Micro usb OTG connector.

Hi
I now want to connect my new HP G2 8" tablet to some external devices (usb-drives etc.) via a micro USB OTG connector. I have already wasted some money buying one on ebay (uk) which fails to work. FYI "USB OTG Checker" identifies the device as capable of supporting OTG as advertised so the tablet is good in this regard.
Does anyone one know of a reputable UK vendor where I can buy one?
Thanks in advance
Frustated Chap

Thanks for the reply.  I would prefer to buy one that is already on this side of the Atlantic rather than have it transported to the UK specifically for me. 
Anyone know of a good UK vendor of a micro usb PTG connector?
FC

Similar Messages

  • (iPhone4) 30 pin female connector to micro USB male connector adapter

    Is there such a thing as a (iPhone4) 30 pin female connector to micro USB male connector adapter, which can transfer audio / music?
    My car audio system has a 30 pin male connector for my iPhone4. Would like to use my Android phone as well.

    Google it if nothing shows ,it doesn't exist

  • Connect Encore with external hard drive through micro USB OTG cable

    Hi
    I am using a micro USB OTG cable to connect the encore with a (get this) toshiba 1TB external hard drive, but when i connect the two, the hard drive connects and then reconnects every 5 to 10 seconds ... and this goes on constantly. This is getting beyond frustrating. Any suggestions ?

    Yea, it's not gonna power anything that needs 2 USB ports as such need more than 500ma. There may well be a low power USB2 spec for tablets Jerry, but what I meant to refer to us the common 500ma standard USB port spec that device manufacturers generally expect. Sorry for being misleading. Basically one can expect issues from any port designed lower than the 500ma spec but I am sure the Encore is designed for the 'full' 500ma, so any example putting out less is below the designed spec. I still suspect the OTG cable first though.

  • Micro usb for blackberry9220

    can i connect otg adpter cable to my phone

    Ubon Micro Usb Otg Cable Lead Wire For Blackberry Curve 8900 9220 9320 9350 9360 9370 9380 / Curve 3G 9300 9330 / Curve Touch& + Free Shipping
    what about this

  • Male micro USB to female apple dock connector

    Hey there does anybody know where I can get a male micro USB to female apple dock connector cable from?
    Many thanks

    What I would do is use the male to male iPhone cable that came with it, attach a female to male micro usb adapto and a female dock connector coupler.

  • Does A- 1 can use the otg to connect the micro usb to the usb drive?

    We have a question?  Can we use the otg in A 1 to connect the micro usb to the usb drive? 

    Of course it can , there  is a lot of cheap Gingerbread based tablets with OTG mode enabled f.e.
    http://www.lark.com.pl/freeme701.htm
    http://translate.google.com/translate?sl=pl&tl=en&js=n&prev=_t&hl=pl&ie=UTF-8&layout=2&eotf=1&u=http...
    It just proper kernel compilation settings issue.

  • USB OTG function doesn't work on Z30STA100-6/10.3.1.2243

    Like the title says, USB OTG doesn't work on my Z30 STA100-6 running the latest official OS 10.3.1.2243. It worked before on 10.2.1.3062. I did tried basic troubleshooting procedures like turning the device OFF then ON, reformat my flash drives to FAT, FAT32, and exFAT and even installed OS 10.3.1.1949, 10.3.1.2072 and 10.3.1.2677 for confirmation, all of which it still didn't work. In short, I haven't got the chance to make this work on any 10.3.1. Another thing: Upon further checking, I noticed that the USB column on the Networks and Connections settings displays "Connected" just by simply inserting the OTG cable into the micro USB port on the Z30 running 10.3.1, that is, no flash drive inserted on the other end. I even confirmed this by going to the engineering screens and confirmed that the device, upon inserting just the OTG cable, detects it and displays it as "OTG dongle". Any help would be appreciated as I really want to get to the bottom of this.

    Hi
    According to the Microsoft page the "Error code 10" appears If the device has a FailReasonString value in its hardware key, that string appears as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message:
    This device cannot start. (Code 10)
    Recommended resolution
    Device failed to start. Click Update Driver to update the drivers for this device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
    Ps: This is only a Microsoft tip but if the USB device cannot work because of the low power supply you should check if it work with the external USB hub wich supports a external power supply

  • For outdoor chargers do people just resign themselves to lightning/micro usb converters?

    I was at a big electronics store in Akihabara yesterday and while they must have had a selection of 500+ different cases for the iPhone 5, there were no portable chargers specific for the iPhone 5. They had zillions of chargers, but they all required buying an extra lightning / micro usb connector.
    On the one hand if I do that I can use the same charger for different devices, including my new Nexus 7.
    But is that what everybody does? Manufacturers don't make portable (e.g. rechargeable battery or solar) chargers for the iPhone 5 with lightning connectors built in?
    Why on earth did Apple go the route of this non-standard connector when there was a perfectly good micro usb standard out there already?
    Thanks,
    doug

    Look closely at the way you handle the cables. I have never had any cable, Apple or third-party, fail on me.

  • HDMI -Micro USB Cable

    Would like to know if anybody purchased HDMI-Micro B USB cable and if it worked with HD TV.
    Thanks
    PJK Dublin

    No, Clear_Blue_Lou is correct, that is a micro HDMI output connector on the bottom edge of the K1, and it has nothing to do with USB.  Here is the spec sheet: http://shop.lenovo.com/us/ww/pdf/ideapad_tablet_k1_datasheet.pdf
    I think what he means by "touchy" is that several people have reported that the sturdiness of the connection is not all that great, and it tends to come loose.
    UPDATE: I just realized the confusion might have been because the original poster forgot to specify K1 or A1 when he started this thread, but since only the K1 has the HDMI output, Clear_Blue_Lou and I were assuming K1.  It is true that the A1 has a miniUSB connector.

  • Does anyone know if the new ipad air has a usb port. This is the only downside to the ipad to me? My samsung galaxy tab has 2. 1 being a micro usb. Great for connecting to the tv.     Thanks, greenlady5.

    Does anyone know if the new ipad sir, not yet available will have a usb port? This is the only thing that is prevented me from purchasing so far. Doesn't make sense when you can connect to tv.
                                                                       ggreenlady5.

    The standard external connection and charge port on all recently-announced (October 2014) models in the US is the Lightning connector, introduced with the iPad 4 in Sept 2012. http://techcrunch.com/2012/09/12/apples-new-lightning-connector-what-it-does-and -doesnt-change/
    This includes iPad Air, iPad Air 2, iPad mini, iPad mini 2 with Retina display and iPad mini 3.
    https://www.apple.com/ipad/compare/
    NOTE: The original iPad (2010), iPad 2 (2011), iPad 3 (early 2012) came with a 30-pin connector, also common to original iPhones and iPods.
    Additional adapters are available to connect TV's, cameras, SD memory cards, and similar devices, from many sources, including the Apple Store online. (Adapters are still available for the older iDevices using the 30-pin connector as well)
    http://store.apple.com/us/ipad/ipad-accessories/cables-docks
    Some common Lightning adapters available from Apple online:
    Lightning to USB camera connector with a 'standard' USB cable.
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
    Lightning to HDMI adapter (requires an HDMI cable as well as this adapter)
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    Lightning to micro-USB connector
    http://store.apple.com/us/product/MD820ZM/A/lightning-to-micro-usb-adapter

  • Micro usb audio out feature addition request

    so i had a pair on micro usb headphones out and i thought it would work on my stream 7, because of the buzzing problem. However it doesnt work and windows dosnt seem to read it either. Any way for a bios update for the stream 7 so micro usb audio out will work, and any hp prgram for them to make, so i can use headphones.
    This question was solved.
    View Solution.

    I know of no device that has OTG "Built in".. so with that said...Micro USB headphones are in more of a testing phase, and only supported by a select few phones/tablets. The device itself has to be "usb headphone aware" because normaly none of these devices default to host mode (ie none of them react to usb connections in the same way a PC/laptop does). 
    USB phones have been around for a while, and if MicroUSB headphones have a fall back that allows it to be detected as a sound device by any usb host port then using an OTG cable (You will probably need an adapter to convert the Type A connection back to Micro B) it should work fine on the Stream 7. However my understanding is microusb headphones are being designed around a more direct support from mobile devices, much like MHL offered HDMI over usb. 

  • Zen micro photo OTG photo trans

    Can anyone please tell me wether pc free photo transfer (from digital camera), is possible with the zen micro photo or vision:m
    Regards & thanks in advance

    you need to get a device that's called "USB OTG Copy Bridge". I got one from Vivanco for 25 euro.
    Here's info on it, but in German
    http://www.vivanco.com/cms/com/detail_produkt?mv_session_id=UURIdUDP&mv_pc=27&mv_ arg=9590&own_key=562
    I'm sure you can find sth similar in your neighborhood.
    http://www.google.com/search?hl=en&lr=&q=usb+otg+copy+bridge&btnG=Search
    I bought it also with the purpose of copying my photos to my Zen Mass Storage Data partition. Actually, I haven't used it yet, but it's good to have, I think.
    EDIT : I've seen a few mp3 players that have the OTG function built-in, but these are really few, and were not reputable brands. None of the Creative MP3 players does the OTG directly, I believe. Hope it will be added to future players, though.Message Edited by fred_be9300 on 2-26-2005 :47 PM

  • S850 Micro USB support

    I would like to buy S850 smart phone and it has quiet good attractive features loaded with in much lower price,but before buying i want to have some clarrification to get cleared.As far as the specifications of design by Lenovo is concerned that it doesnot have a support of micro USB and have internal build memory of 16GB,to this case how to transfer the photos and others data storing in mobile to either LapTop or any other accessories when data become overflow and doesnot have space to accomodating further in the event of having more data.Correct me if i am wrong perception about the specification.
    Recomment your valuble suggestions on this  and appreciate if Lenovo personel would reply sooner as possible would enable me to buy this product.
    Thanks
    Srinivasan
    Solved!
    Go to Solution.

    Hi
    The S850 dosen't support OTG...But that dosen't mean you can't connect your S850 to your Laptop or PC to transfer files (The Micro Usb charging cable can also connect the device to any 2.0 USB PC port).
    You can use the built in SHAREit app to wirelessly share files with a PC or any other compatible Android device.
    ....There are also other methods to share and receive files.
    Hope this helps.
    Cheers.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • AT200-101 USB OTG strange behaviour with all devices

    Hey,
    I've got an AT200-101 with an updated ICS 4.0 OS and I can't get the USB-hostmode to work. After a lot of reading about the fine difference between the regualar (type B) USB connector and type A (known as OTG) I finally have got the right adapter (it has a recangular shape and the ID-pin is grounded).
    Now each time I plug in a device (usb massstorage device, 3G modem) nothing happens except the AT200 suddenly shows *charging* even though it's not connected to the charger nor is the connected device externaly powered.
    I tried these external USB devices with an other ICS tablet (Zenithink) and they work fine.
    Andybody any clues?

    If you have an active USB-Hub (with an own power supply) at hand, you can try to put that in between the device and the AT200 + USB-OTG Adapter.
    The AT200 seems to allow just a very low consumption of bus power.

  • Do the asha 305 support usb otg?

    If the asha 305 support usb otg, how can i use it? Has anyone tried it?
    Solved!
    Go to Solution.

    No, it is not available for 305. For devices which support USB OTG differentiates themselves from non USB OTG devices
    by having their micro USB port in rectangular shape.
    Hope this helps.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

Maybe you are looking for

  • Imac doesn't recognize my external hard drive--all of a sudden

    i've been using a LaCie external hard drive as my timemachine back up for several years without incident.  a few days ago i unplugged the lacie and when i plugged it back in, imac could no longer recognize it.  when i go to time machine and try to"se

  • Using HTML tags in Flash

    Hello I have some XML that's loaded into Flash by ActionScript and in the XML, I have some text under a node as a parameter called "content" but the problem is that I need to have some HTML code in there (Anchor Tag for links) But it isn't rendered b

  • How to  word wrap the Print from JEditorPane correctly to a print page?

    Hi, I'm trying to print text from the JEditorPane. However the printout does not word wrap and some gets cutoff. Is there a way to set the word wrap when printing? Thanks for you help.

  • How to send the Escalation mail

    Hi , We have 7 levels of approval for Shopping cart , however, any one of the manager not approved with in 2 days the escalation mail should send to xyz@company com (central purchaser mail id) How to configure this one ?? Thanks in advance Harish

  • Java static code analysis tool on Windows

    What Java static source code analysis tool are there on Microsoft Windows, and which would you recommend? I Know Coverity and Klocwork Edited by: Jennifer.helen on May 8, 2009 6:03 AM