Micro zen installation probl

i have a freind who has a micro zen and he li'ves a long way away but all i want to do is copy his music onto my computer he hasnt got any cds, it is soo difficult its not simpleat all, why are the files protected in my computer, can u tell me what i have to download and run to copy them onto my harddisk

i have a freind who has a micro zen and he li'ves a long way away but all i want to do is copy his music onto my computer he hasnt got any cds, it is soo difficult its not simpleat all, why are the files protected in my computer, can u tell me what i have to download and run to copy them onto my harddisk

Similar Messages

  • Micro Zen Firmware probl

    Ok, so I have seen a ton on this already, but I am having trouble making them work for me so I am starting a new one. Here goes...
    I have a micro Zen mp3 player, worked fine for most of the time I had it. Then one day it said "firmware problem" and showed me four options. I took them in roughly this order: Clean up, then a formatting option, then reboot. Then I foolishly chose the horrible misnamed "reload firmware" option and promptly screwed myself up. My Micro zen was not plugged into my computer at the time so I could not reload the firmware. Then a day or so later, my computer died as I was awaiting a response from Creative. I got a new computer, and it runs vista. Now, I plug it into my USB port and the computer recognizes that a new device is plugged in, but no other program (Windows Media player, etc) recognizes that it is there.
    So, thats the back story. What do I do now? Other than hit my mp3 player with a hammer or otherwise break something out of frustration....

    Bear with me as I lay out the problems/sequence of events:
    - Got excited over the MTP support and upgraded. My laptop stopped recognizing the Zen
    - Creative support thought that my MP0 maybe hosed; so I rollback and install MP0 again. No resolution.
    - Went into to 'rescue mode' and wiped the disk clean
    - Installed the old firmware; my laptop recognized the Zen
    I pressed on and connected my Zen to a desktop and upgraded the firmware to MTP support (v2.x)
    - I was able to sync with MP0 but frequently experienced problems with 'hang' during sync after 00%
    - I disconnected the unit and MP0 aborted the sync
    - Reconnect and sync would hang at the exact same song. Further, I noticed the following:
    - Songs would sync up very fast (noticed around 800KB/S)
    - The problem song would experience startup problems and would hang after reaching 00%
    - I deleted the 'problem' song (which plays fine in MP0) and 'sync' continued without problems
    - Created a playlist in MP0 which synced OK; but the Playlist is missing in Zen!!
    Summary:
    I think Creative released the f/w too early.

  • Zen Micro 6gb installation probl

    Ok, so Iv'e sent in a 5 gb zen micro twice now because of that headphone jack problem, and this time when they sent me a new one, they "upgraded" me to a 6gb. Well, I try to use this 6gb with the software i have installed from the last Micro I had, and my comp will not recognize it. So I try to user the cd that came with my old Micro, and it will not install right. When they sent me this 6gb, the only thing they sent me was the Micro and its battery, so I have no way to know if the cd that comes with a new 6gb is different form a 5gb cd, because if it is, then am I screwed?

    A firmware basically is what makes an electronic device tick. It is the software responsible for every and all functions.
    The Zen Micro has two versions of firmwares:
    The original version works with Creative's own protocol and thus needs the installation of drivers for the system to recognize it. However it will function with all Windows versions while there also is unofficial support for Linux and MAcOS.
    The second version functions using MTP, a protocol made by Microsoft and as such it is only supported by Microsoft's Windows Media Player 0 under OSs that support it (which basically only are WinXP and Vista...)
    The simplest way to see which firmware you have is to look in the Micros' menu under System->Information. There you'll see firmware version.
    If they both have version (..0 being the latest) then you'll need drivers for the both. As I already said, when I tried to update the drivers without uninstalling the old ones the drivers were installed but they wouldn't work.
    First of all make sure the player(s) is(are) connected to the PC FIRST.
    Mind you, in my case the latest drivers were already installed (I updated them but then they wouldn't work, remember?). Now here's the thing:
    When I opened the drivers properties I saw that the driver was DISABLED. (under General, device usage)
    Ok, I enabled it, nothing happened. Then I tried to update the drivers. Here's what I did:
    I put the CD with the original drivers in the dri've and selected for windows to look for the best drivers. After some time they indeed appeared to have found a better match and then they started installing them. After the installation was complete the driver's version was the same as rhe one BEFORE the "update" (since I had already updated to the latest version). However the moment the drivers were updated the device was finally recognized by the system, not even a reboot was needed...
    You could try doing that too, if that won't work then you could try DLing the LATEST drivers (along with the Zen Micro Explorer) and install them AFTER uninstalling the old ones and REBOOTING. Again, it is important having the player(s) connected BEFORE starting the installation.
    If after all that you still can't connect it ask again!
    Cheers!Message Edited by Keyper7 on 02-9-200604:37 PM

  • Creative Zen - Installation Probl

    Hi there,?I was installing my Creative zen and my computer crashed out half way through the installation process. I tried Uninstalling the program but it will nor unistall as there is an error, i tried re installing it but it will not let me and i tried using the repair button when the disk is put in and it wont let me do that either. Has anyone got any suggestions on how i might be able to fix this problem. Does the program have to be installed for me to use it, can i just use it like a portable dri've and move files over into it's?ThanksChris

    Same problem, purchased my creative zen Micro 0-0-06. Noticed 4-25-06 that I can not turn on my zen with on/off switch. I can however get my zen on by plugging in usb cable. Very frustrating since I have taken good care of device. $78.00 did not give me many day of usage. If you find a solution to the prob let me know. Thanks.

  • *sigh* zen micro installation probl

    from searches, i see that this is common. haven't found a good solution to it yet, though.
    i just bought a zen micro 6GB for my girlfriend. (awww). i have XP, and installed everything on the disc except acrobat and the aol shortcut.
    creative mediasource installs fine .... the zen micro explorer installs fine .... but when i plug the player to the computer, it ) doesn't charge and 2) isn't recognized.
    there is a yellow question mark on its usb port when i search for it.
    what am i doing wrong?

    Your chances of getting it to work when XP has a service pack is greatly increased. There are some who have got their player working on XP without a service pack, but on many systems a service pack is necessary. As far as I can tell it doesn't matter if you have SP or SP2 installed, there is no difference in success rates.

  • Micro Zen's not working (firmware probl

    After having my micro Zen with me to Greece, I've got a fatal firmware problem. I got this message that my Zen was having a firmware problem and therefore wouldn't start. It went directly into recovery mode. I tried cleaning up, but even that wouldn't work. After restarting about 20 times, I made the decision to reload the firmware in recovery mode. My current firmware version is ZenMicroPDE_PCFW_LB___0. All seemed to function, but after having the message "rebooting...", the process just stopped. After about hour I got tired of waiting and stopped the process. Now, when I'm starting my Zen, I'm only getting the welcome screen. I've tried the recovery thing, but the machine won't go into recovery mode. Any hope for my Zen?
    Bergy

    well took my Zen Micro with me on holiday as well and when i came back I didnt bother using it for about 2 weeks. So 2 weeks later I want two transfer some songs on but first I realise I have a low battery and i charge via the usb cable and it comes to the recovery mode so reboot it but it comes up the recovery mode again and i try to reboot it again but it does the same thing so I reload the firmware and the reboot it but it still doesn't work. I left for a while once once it had charged a bit so then later on i switch it on and it comes up Firmware Problem and then into recovery mode, i reboot it but it still comes up Firmware Problem and then recovery mode. So I'd like to find out if there is a way to fix the problem.

  • Micro Zen Qusti

    Hi
    I apologise in advance if this is the wrong thing/place to ask.
    I will be buying a zen micro soon, i hope.
    i just wanted to clear a few things up...
    .Am i right in thinking that pretty much any MP3 can be transferred straight to the zen micro.
    i.e. the zen micro is not exclusi'vely for ripping tracks off a CD or for transferring music from a website like napster.
    2. Is there a hold or lock function>
    3.does it except characters other than english?
    4.does windows media player allow for quick and easy drag and drop for mp3s into the zen micro (providing you have WMP0 W-XP and firmware v.2)
    thanks in advance
    makihara
    p.s. if this is the wrong place to ask could someone point out where i should ask

    hey
    thanks very much for your response
    as for charcaters i would like it to recognice japanese kanji characters
    i mean yes i can change the name but thats quite laborious
    What's more the artist, album, genre name etc. is also all in japanese
    so i'd need to use WMP advanced tag editor to change evry single piece of data for each song
    I'm still going to buy a micro zen though
    thanks again
    makihara

  • Why does the micro zen break for any little thi

    I hate that the micro zen break if u drop it on a soft suface. I dropped my micro zen on my futon and the zen didn't want to work anymore. Can anyone tell why this machine is so bad? And if you know how to fix it, please tell me.

    Hold on a second people. Every manufacturer builds their products with some amount of durability in mind. Being able to take a short drop IS a part of that. Surly its not meant to be dropped, but manufacturers know we dont li've in a perfect world, so they take a little of that into account when building their products. Some of you guys act as if its EXPECTED to stop functioning after a small drop, and on a cusion at that.
    By the way, i see your problem as a freak accident or something.

  • Micro Zen "not detected." Help plea

    I know this topic has been beaten to death on the board and I've read and reinstalled etc but I'm seriously at a loss.
    I got my Micro Zen player today and set it up. I installed the software and then plugged it in and got that annoying "device has malfunctioned and cannot be detected blah blah blah" message that everyone seems to get. So I uninstalled everything, reinstalled it tried again. No luck. I download the drivers and installed those, no luck, tried to reinstall the drivers on the CD, no luck. My sister got an identical mp3 player so I tried hers with the same result, tried using the cord that came with hers, tried using the CD that came with hers, tried using my digital camera's cord, tried multiple USB ports. I've probably tried a few other things but I've been working at this since this morning. Ick.
    I haven't tested it on another computer, but I don't think that will make a difference. I need it specificlly on this computer (seeing as it's the only windows computer we own, the other is a fi've-year old iMac). And I don't think it's an issue with the player or cord since I'm getting the same result with two different players.
    I'm running a Windows XP OS on a Dell computer that's under six month old.
    Does anyone have an suggestions? <EM>Please?</EM> It would be muchly appreciated. If you feel the inclination, my screen name on AIM is x the lovelyLIZ. I'll have an away message up but if you could just leave a suggestion there I would eternally grateful. Or replying to this post work great too :smileytongue:
    Thank you so much.

    meika wrote:
    I got my Micro Zen player today and set it up. I installed the software and then plugged it in and got that annoying "device has malfunctioned and cannot be detected blah blah blah" message that everyone seems to get.
    Certainly not everyone! It's a rare error...
    I haven't tested it on another computer, but I don't think that will make a difference. I need it specificlly on this computer (seeing as it's the only windows computer we own, the other is a fi've-year old iMac). And I don't think it's an issue with the player or cord since I'm getting the same result with two different players.
    Chance are it's a USB compatibility problem. Check for motherboard BIOS updates, and USB chipset updates. Alternati'vely get a PCI USB2 card and fit that, they aren't expensi've.

  • Problems with my Creative Micro Zen hanging on the Creative Logo Scr

    I've been having problems with my Zen and have sent the following email to creative but if any one has any suggestions etc on what to do could they please email me thanks
    My Creative Micro Zen 5GB player has been hanging whilst using the player.
    I followed the advice found in the manual and on the creative web site to reset the player by removing the battery and then reinstalling it. This worked on a few occasions.
    However the player hung again and so I tried to rest it as before, when I replace the battery the player turned on and lights up with the Creative logo screen, but then hangs on the Creative logo screen, despite waiting to see if the player continued with the start-up, it did not and so then I tried resetting again, by removing the battery and reinstalling it.
    However the player is still hanging on this screen and I cant get it move away from this screen. The player wont allow me to move away from this screen at all, so I am unable to carryout the disk clean up which was also suggested. When the resetting didn?t work, I tried taking the battery out and leaving it overnight and then replacing the battery, however the player still hangs on the Creative logo screen. This has been continuing now for three days.
    I have also tried plugging the player into the power charger and it still hangs on the Creative logo screen. The backlight on the Zen Player lights up when the player first turns on but once the Creative logo appears on screen the light fades out. I have also tried recharging the battery to see if maybe the problem was a flat battery but this didn?t appear to work as it is still hanging. However the Zen does light up as it does when it charges normally. I also own a spare battery, which I have tried but the Zen player still hangs on the Creative Logo page.

    I found the solution! I saw numerous posts saying that all you could do is send it back to the company, then I found this one:
    Hi All,
    My zen has been down for the last week, hangs up on creative screen. I took the battery out and was able to get to the recovery mode but "disc scan" would not do anything(in limbo) and "reboot "met with the same result, nothing. If you want to talk to anyone at creative and are past your 6 month warranty window you have to pay $20 for the phone call. Well I decided to take matters into my own hands and spent yesterday morning researching old threads about this problem. I kept finding an uncommon fix. When you hold your power button on and replace you battery and the recovery screen starts up you wrap on the back with your knuckle, in my case I hit my zen face down sharply on my dresser. To my amazement the "Doobie Brothers" started playing and I have'nt had any problems yet. Evidently these systems have a hard dri've that hangs up. It may not work for you but it cured my glitch.
    Steve C.
    It worked for me, but only after four or fi've tries. Good Luck!<IMG height=6 src="http://forums.americas.creative.com/i/smilies/6x6_smiley-very-happy.gif" width=6 border=0>

  • My Micro Zen It isn't detec

    My Micro Zen it isn't detected when I connect it to my computer. The USB ports?work properly and the software its installed. Every time I connect?it the creative mediaSource recognise it'sbut then I get a window telling me "player not connected". Any ideas of what is the problem?

    I lost my install cd, and started from zip, i tried every download here which didnt help at all, when i tried to download creative media source, it would always stop at the end saying could not detect a device, this went on for weeks. Then with all kinds of mucking around i ended up in my control panel, and found device manager, i went through this and found the word creative with a ? next to it, i then click it and basicly it ended up searching for drivers, it did so successfully. When i plugged in my zen micro photo i was then prompted to sync it wd WMP, which i did. Then i tried the creative mediasource download again, and it was detected and downloaded followed by the drivers. THANK GOD!!
    !!! After crying tears of joy after weeks of crap and almost zero help here, i had done it. Also, if i plug in my zen micro, i must sync it with WMP, otherwise my creative media source will not detect it. I hope this helps some people out there. CheersJim

  • Micro Zen - Ho bisogno di ai

    Questo il mio messaggio di aiuto:
    Dopo aver ricaricato Micro Zen non ? pi? ripartito. Si accende, poi lo schermo si spegne ed ? come piantato. Non da pi? segno di vita. Rimane la scritta CREATIVE ma la luce si spegne e cos? rimane fino all'esaurimento della carica. Se lo attacco al pc, non viene rilevato.Grazie per il Vostro aiuto.Ho comprato l'Mp3 all'UNIEURO di Ros?, Bassano del Grappa (Vicenza). Loro mi hanno detto oggi di contattarVi.
    La Vostra risposta:
    Gentile ClienteQuesta ? una risposta automatica alla sua richiesta.Se ha un problema con il suo lettore segua pure i passaggi elencati sotto per ripristinarne il corretto funzionamento.Acceda al Recovery Mode del suo Zen Micro, dal quale potr? attivare delle semplici operazioni di ripristino sul suo lettore:Per accedere al Recovery Mode dello Zen Micro rimuova la batteria, tengail tasto di accensione in posizione ON (verso sinistra) mentre reinserisce la batteria. Il lettore si accender?; attenda che appaia il Recovery Mode sul display, quindi rilasci il tasto di accensione.Quando entra nel Recovery mode dello Zen Micro presti particolare attenzione all'uso del touchpad. Si accerti di selezionare solo l'opzione desiderata; alcune delle opzioni disponibili potrebbero modificare il funzionamento del lettore.Le opzioni del Recovery Mode a?dello Zen Micro:. Clean Up: Esegue uno scandisk sull'hard disk del lettore. Il Clean Up non canceller? i file contenuti nella memoria del lettore.2. Format All: Formatta l'hard disk del lettore - N.B.: VERR? ELIMINATO TUTTO IL CONTENUTO DEL LETTORE!!3 Reload Firmware: Questa opzione avvia il processo di ricarica del firmware del lettore:a) scarichi il firmware aggiornato per il suo lettore da: http://www.europe.creative.com/support/downloads/e lo salvi sul computer dove lo potr? successivamente trovare con facilit's ( es. sul Desktop) b) Selezioni l'Opzione ?Reload Firmware? dal lettore, quindi segua le istruzioni visualizzate sul display del lettore. Questa operazione richieder? alcuni minuti. La preghiamo di pazientare e di non scollefareil lettore durante il processo. c) Una volta completato selezioni ?Reboot?.4. Reboot (Selezioni l'ozione Reboot una volta completate le operazioni di ripristino per riavviare il lettore.__________________________________________ ____________________
    Non sono riuscita a fare nulla di tutto questo perch? il Micro Zen ? bloccato.
    Cosa faccio ora?
    Aspetto un Vostro consiglio

    I resolved yesterday! Thanx anyway.
    I downloaded the Creative Zen Micro Media Explorer Web Update.

  • Zen Installation Problems

    I had a server running Zen 6.5 that crashed completely. The server has
    been replaced with a nw6.5sp5 server with both the post sp5 nss and
    server.exe patches. I removed the old server correctly from the tree.
    When I try to reinstall the Zen for Desktops the installation does not
    complete. The install log says:
    Pre-install steps completed successfully
    InvDB components NOT installed
    Error: There was an error installing Zenworks Desktop Management
    Error: Error copying files to server. Be sure that no ZENworks Desktop
    Management files are open or locked.
    Did I miss removing some ZEN items from the tree before I did the ZEN
    installation?

    On Thu, 05 Oct 2006 21:38:23 GMT, [email protected] wrote:
    > Found tid 3769403 and uninstalled NMAS on my workstation and the
    > installation went.
    thanks for letting us know..
    Marcus Breiden
    If you are asked to email me information please change -- to - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

  • The Micro Zen's with reinforced headphone Pl

    I heard the Creative has released some new Micro Zen's with reinforced headphone plugs. I just what to know how to find out if the one your buying has this? Recently my Zen's headphone plug kinda stopped working and so I'd like to exchange it for the one that has the rienforced thing in it since it has been less than 30 days so I can return it.
    thankz
    Figgy

    There's no real easy way to tell. Some people have said that if you take off the white top then you can see that there are two (or was it one?) screw that holds the top plate on.

  • Micro Zen's face pl

    I dropped my micro zen, and the face plate became a little lose; it creaks a little if i apply pressure to it.
    Do you think it'll come off completely? or break all together?
    I just want to be sure
    Message Edited by __ToFUtiffy on 05-22-2005 06:08 AM

    __ToFUtiffy wrote:
    DM: I dropped it on the carpet, how much damage do you think that'll be? ): and where am i able to find service if the hard-dri've *is* damaged?
    You can never tell how much damage, if any was done. It depends on many factors like: How high it fell, how soft the carpet is, what part of the player it fell on (back, front, side, etc...), where the read/write heads of the dri've were, if the player was on, and more... There isn't much service to do besides a complete hard dri've replacement, and I think Creative can do this but I haven't taken a look at what the warranty covers and where repair centres are and what they can do....

Maybe you are looking for