Micro Zen | problem with the output "ho

Hello.
For a few weeks now the contact in the output "hole" get worse and worse. When i plug in my earphones and only touch and bend the plug a little bit in direction to the screen, the sounds gets all numb,quiet and sometimes i hear nothing. It turned that worse that i can't have the Zen in my pockets anymore, cuz the cable bends and so the sounds goes all quiet...
I think it's a warranty subject, what do I have to do to send it in? I had a problem last july with it already and sent it in, but forgot the procedure it goes through
Oh and I also handed it in to my local shop where i bought the Zen in 2005 because of a hardware issue and they got me a new one from creative (so they handled the whole RMA procedure).
So what am I gonna do now? I bought the Zen in july 2005 and Creative already knows that because of the first RMA ^_^

Before you do anything. Which headphones are you using? Are you using a case?
My case fits around the hole perfectly so if the plug of the headphones is to thick like my Sony MDR-V50 (http://images.amazon.com/images/P/B000092YPR.0.LZZZZZZZ.jpg) it will play.. but if I move the wire around just a bit only the left side of the headphones will work. So I have to use the earbuds that came with my MicroPhoto.. a shame to cause headphones sound so much nicer then earbuds.. oh well. Try a different pair of headphones/earbuds.

Similar Messages

Extracting Images from EPS - Problem with the Output

Hello,
I got a big problem extracting images from an EPS, which has been made in InDesign. The image does not appear correct.
Source code:
%ALDImageFileName: Speicher:image.jpg
%ALDImageDimensions: 30 30
%ALDImageCropRect: 0 0 30 30
%ALDImageCropFixed: 0 0 30 30
%ALDImagePosition: 203.8677 344.8913 203.8677 359.2913 218.2677 359.2913 218.2677 344.8913
%ALDImageType: 4 8
%%BeginObject: image
[14.4 0 0 14.4 203.868 344.891 ]ct
snap_to_device
Adobe_AGM_Image/AGMIMG_fl cf /ASCII85Decode fl /RunLengthDecode filter ddf
<<
/T 1
/W 30
/H 30
/M[30 0 0 -30 0 30 ]
/BC 8
/D[0 1 0 1 0 1 0 1 ]
/DS [
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
/O 3
>>
%%BeginBinary: 1
img
p&G-p!<E*"!<<3"!!!&i!!30$!Vl`q!V$-m!WW3&!r`0#!Wh]h!!20]!WW3$qZ$^!!!!&f!!30$!WE'!
!WE'$!<<*#nc/[l!W<!#!WW3%h>dNVnGiXl!<<-)!!*'"!<<2f!<*$!!<3)a!!!&t!!*-%kl:\ar;Zm"
!!2He#6G2G(D[>Z!<*#e!!WKUEK,/l!r`0"!V$.!!Wi?'-t[mD-NjDN!!2Zk!!3#u"T\]4$OR%8!!!&h
!!<6)*\I@D!\,8pq>g3h%KQP0';ta-rr2ho&-2b3mf3Y*Q/q,jk2D[9"76'h!=o#B!Y,22n,Nn!!!=Q!
0.ee,0/"XS!VHHl!!E<'!"[l]rrUsd!Ug!r&'a/!k3(mej38#8mJm8&'`/UF'`J.(!"8l.+"o,p/hSe-
/M8.8!!<6%!i#Yn!<2rs!2Ao^$NZFPk2tpjkND!jP3r;O%29TU'`o-b%e'H-!=:8,0/"h-.kN>(.gkeH
"T^(Js8W&srrE$$rr;gE!V-4"""*$ljlY^djQYmmi$\'q!W`9(p([Q1nc/dn!#@(:r[nC..kE8)/emgU
!<IHErs8W(rr<#trr76B!:p1!CZadBk2kmhj65^iD"%E-$5O?k'`&OE$M"0,!<<uh0.ee0/h\e,/h.k2
!!*+arVm-$s8W)us8J2U!;Z[(L?.U[kN:sflf@0hK^f$D!=T\>'a5?f'c%2YnGit6/1iM*/1iA*.kWFi
nc/dn!I+SBqYpWrrcdo5!<N60C$4[@ki_*hl0.?lD".K0!=9MV'c%S_'`f!Vnc01&!!t50/M8P+/h8J)
.gH+F!!+PDrVllsrVlrp.KT,@#QauQip#Ifk3*$4ki:gb-3Nc<$j.4Z'GV>s'bqJt('F(,%06GL/hJ_.
.k<;..j"f]!!32!rql]tr;WMmmf3c`k2tsgk2tmikEZ,Kn,NJ!'`/UJ'G_,X!V-6i!=L8*/2&S./M&=P
!!2Ti"9AV]s8N#t"o\JY&c_t$!"-g0j6,RdkNBr!!r2ii!!!]1'a,9f'*84(!"Ar/""YuT/M8Y)!WW3$
nc0%!!!!Z$s8N#ts76`i!"T,3!!3\bl0.?qjkC7H!!;`lrW!!#!>PMJ!u;Ub!Ug$f!=JlU/M/S*/ggZ#
!!2Ng$3K)as8N&tjT#8]m/R@3k2b[ck03)j!>?4H'`\p6!!**(r[e6p.kWIZmJm:h!#kk:#.sp7ru_:B
mJmV6jQ>U%kN:kH!!!)h!!!'!'`\gE'`eC:mf3^r!=pb8/ds9_.h;[J!!u[*s8GIerr6%#m/RGck3(kk
kNM&%!Up'o!<<*)'bhDfrY5G=!Vufj!"K#0!#mOB.0(kM0,afj!V$-u!<A8^s6B[Es8S8_!U]poKBMCG
!7'`iKECN@#RhF_'*&[\'b'X5r;[9-!$a!F*W[<7.jP)q!V-4#!<<,As8T>(W;lnB!!!&g!"63skFhmD
jlEuS!!2Ng#S7^d%KHtR'bTm7!s/H(/-mj['`\n!/1Ukk!"985s8@'?Du]k7%KHP#!"8l0$KC71C'%l,
jl$a?!!<6%!!3'6!X\o6rY5J8!!2Qh#Ri::0*_I`/1U`S%.4)q5Q:Zg2ukf6s8P=a!V$-t!]]?)jY?ff
kN:qhmJmFp()7Pf!!N99!!Vcj$l1NL.KKPM/1iIi!!3'!o`,F%!dakFpBL[$pAb/A!Up's!H@5cf`qK\
hWF!BmJmV%'GV;_!!*`J'FFm3!!WH(!?WpE,Q7ZH+tP;f!!2foq>^W-s8Tn6!!L"8s0r.!!">[bkcXsf
!3>;FU]CPd!!<]G'bL?E!tZ.^&+9K$!\#`P)?'U>'eM$g!!2Zk!W`9$$g.KhLB.ATL&_2?"7Q9n!RU)n
I/X*KGN@l9"Rc<t',;8j!!!$,'bhAP!!WQ+!"US5%fQG1%PKFQn,NUm!*fL'9)\en8,rO]!V-4"!rrBu
jQ/].!WYOLl&b?6"9AcD'aFX;"9oSU%0>nt$NV(q!rr<%"YC_q"7Z@"!<<+Eq@Wc/!#,C9"9&;k!!E?)
D;u0+!!<qtS-&0["T\T'$5EXA!!33:%da5t!<<]/!!3u<!V$-o!<<*#!FZ$-!!A;d!!2ipq#CKu!<?7$
!!WK)KEM8T"RZ6i$2so,!<<Q0li77k!!30$!<</h!!!'!!!E<'!!!&c!"8o/!!*'#"98E'!WW;h!!!'!
!!NB'!<<*#n,N[o!<<*#!!!'!!!!&f!!E<&!!*-"!!!'!!!**%o)K!s!!*-$!<<*#!!<-"!Wi?&l2Ueb
rVup!q#Gp~>
%%EndBinary
%%EndObject
Orginal image Size 553,9 KB
After decoding the size is only 1,8 KB
First try.
public class ASCII85Decode {
private ByteBuffer buf;
* initialize the decoder with byte buffer in ASCII85 format
private ASCII85Decode(ByteBuffer buf) {
this.buf = buf;
* get the next character from the input.
* @return the next character, or -1 if at end of stream
private int nextChar() {
// skip whitespace
// returns next character, or -1 if end of stream
while (buf.remaining() > 0) {
char c = (char) buf.get();
if (!isWhiteSpace(c)) {
return c;
// EOF reached
return -1;
public static boolean isWhiteSpace(int c) {
return (c == ' ' || c == '\t' || c == '\r' || c == '\n'
|| c == 0 || c == 12);
// 0=nul, 12=ff
* decode the next five ASCII85 characters into up to four decoded
* bytes. Return false when finished, or true otherwise.
* @param baos the ByteArrayOutputStream to write output to, set to the
* correct position
* @return false when finished, or true otherwise.
private boolean decode5(ByteArrayOutputStream baos)
throws PDFParseException {
// stream ends in ~>
int[] five = new int[5];
int i;
for (i = 0; i < 5; i++) {
five[i] = nextChar();
if (five[i] == '~') {
if (nextChar() == '>') {
break;
} else {
throw new PDFParseException(
"Bad character in ASCII85Decode: not ~>");
} else if (five[i] >= '!' && five[i] <= 'u') {
five[i] -= '!';
} else if (five[i] == 'z') {
if (i == 0) {
five[i] = 0;
i = 4;
} else {
throw new PDFParseException(
"Inappropriate 'z' in ASCII85Decode");
} else {
throw new PDFParseException(
"Bad character in ASCII85Decode: " + five[i]
+ " (" + (char) five[i] + ")");
if (i > 0) {
i -= 1;
int value = five[0] * 85 * 85 * 85 * 85 + five[1] * 85 * 85
* 85 + five[2] * 85 * 85 + five[3] * 85 + five[4];
for (int j = 0; j < i; j++) {
int shift = 8 * (3 - j);
baos.write((byte) ((value >> shift) & 0xff));
return (i == 4);
* decode the bytes
* @return the decoded bytes
private ByteBuffer decode() throws PDFParseException {
// start from the beginning of the data
buf.rewind();
// allocate the output buffer
ByteArrayOutputStream baos = new ByteArrayOutputStream();
// decode the bytes
while (decode5(baos)) {
return ByteBuffer.wrap(baos.toByteArray());
* decode an array of bytes in ASCII85 format.
* <p>
* In ASCII85 format, every 5 characters represents 4 decoded
* bytes in base 85. The entire stream can contain whitespace,
* and ends in the characters '~>'.
* @param buf the encoded ASCII85 characters in a byte buffer
* @param params parameters to the decoder (ignored)
* @return the decoded bytes
public static ByteBuffer decode(ByteBuffer buf)
throws PDFParseException {
ASCII85Decode me = new ASCII85Decode(buf);
return me.decode();
2. Try
public class Ascii85Decode {
private final FileOutputStream fos;
private Ascii85Decode() throws FileNotFoundException {
File f = new File("/home/markus/1/test/bild.jpg");
fos = new FileOutputStream(f);
@Override
protected void finalize() throws Throwable {
fos.close();
super.finalize();
public static byte[] decode(byte[] in) throws FileNotFoundException, IOException {
Ascii85Decode ascii85Decode = new Ascii85Decode();
ascii85Decode.setData(in);
ascii85Decode.decode85();
return null;
static long pow85[] = {85 * 85 * 85 * 85, 85 * 85 * 85, 85 * 85, 85, 1};
private byte[] in;
private void setData(byte[] in) {
this.in = in;
void wput(long tuple, int bytes) throws IOException {
switch (bytes) {
case 4:
putchar((int) (tuple >> 24));
putchar((int) (tuple >> 16));
putchar((int) (tuple >> 8));
putchar((int) tuple);
break;
case 3:
putchar((int) (tuple >> 24));
putchar((int) (tuple >> 16));
putchar((int) (tuple >> 8));
break;
case 2:
putchar((int) (tuple >> 24));
putchar((int) (tuple >> 16));
break;
case 1:
putchar((int) (tuple >> 24));
break;
void decode85() throws IOException {
long tuple = 0;
int c, count = 0;
int i=0;
for (;;) {
switch (c = in[i]) {
default:
if (c < '!' || c > 'u') {
System.err.println("%s: bad character in ascii85 region: %#o\n");
System.exit(1);
tuple += (c - '!') * pow85[count++];
if (count == 5) {
wput(tuple, 4);
count = 0;
tuple = 0;
break;
case 'z':
if (count != 0) {
System.err.println("%s: z inside ascii85 5-tuple\n");
System.exit(1);
putchar(0);
putchar(0);
putchar(0);
putchar(0);
break;
case '~':
if (in[i+1] == '>') {
if (count > 0) {
count--;
tuple += pow85[count];
wput(tuple, count);
c = in[i+1];
return;
System.err.println("%s: ~ without > in ascii85 section\n");
System.exit(1);
case '\n':
case '\r':
case '\t':
case ' ':
case '\0':
case '\f':
case '\b':
case 0177:
break;
i++;
private void putchar(int l) throws IOException {
//System.out.write(l);
fos.write(l);
Does anybody have an idea to solve the problem?

A scan from string function can be used as per the attachment. The double \ ('\\') is in the format string in order to interpret the '\' characters in your input string as literal characters and not special formatting.
Message Edited by Dennis Knutson on 07-10-2006 03:53 PM
Attachments:
Scan From String.JPG ‏5 KB

Problem with the output ports of the data service !!!!! attention

Hi,
I have created a functional module x using abap programming.
The functional module x with one input and one output table.It successfully executed in abap.
Later i activated and used it in visual composer 7.1 .It worked perfectly fine.
The input port displayed was :Hollow Diamond shape
The output port displayed was: Filled Square shape.
Then i thought of changing the abap program by adding one more input and one more output table.
So i have two inputs and tow output tables.
The abap program exceuted correctly.
But when i used it in visual composer 7.1 . It didn't work.
As
The input port displayed was :Hollow Diamond shape ( correct )
The output port displayed was: Filled circle shape.( Not a correct display ).
So i couldn't drag the table output from the circled port.
But When i test the data service then it gives perfect results.
Later i created a new functional module Y with same two inputs and same two output tables. It worked fine.
Please help me . When ever i add new tables to already activated data service i face the same problem.
Kindly advice.
Regards
Tekumalla

Hi,
Following is an image of a slide describing the port types in Visual Composer:
http://img116.imageshack.us/img116/2465/portshapesrt7.png
Which port is appearing on your service?
Would it be possible for you to send a screen shot of your service in VC?
Thanks,
Shai

Problems with the output of an array

Hallo,
I have got problems with giving out an array.
I declared two arrays and puted them out, but with the
resultarray it doesn�t work. Cansomebody help me?
Here is a runtime output:
Grad eingeben!
1
Koeffizienten eingeben!
1
2
1x^0 + 2x^1 +
1
Grad eingeben!
3
Koeffizienten eingeben!
2
3
4
5
2x^0 + 3x^1 + 4x^2 + 5x^3 +
3
p:1
this:3
And here is the source code
// Die Klasse Polynom dient dem Umgang mit dem Polynom
//Sie enth�llt die Methoden:
//   > public void readCoeffizients()
//   > public void show()
//   > public int getGrad()
//   > public Polynom add(Polynom p)
//Und den Konstruktor:
//   > public Polynom(int n)
public class Polynom
private int grad;
int [] coeffizient;
private Polynom q1;
public Polynom(int n) //Konstruktor mit Stanard-Initialisierung
    this.grad = -1;
    this.coeffizient = new int [n+1];
    for(int i=1; i<(n+1); i++)
      this.coeffizient[i] = 0;
public void readCoeffizients() // Methode zum Einlesen der Koeffizienten
    this.grad = (coeffizient.length)-1;
    System.out.println("Koeffizienten eingeben!");
    for(int i=0; i<(grad+1);i++)
      this.coeffizient[i] = Eingabe.intValue();
public void show() // Methode zum Ausgeben des Polynoms
    for (int i=0; i<(this.getGrad()+1);i++)
      System.out.print(coeffizient[i] + "x^" + i + " + ");
    System.out.println();
public int getGrad()
    return this.grad;
public Polynom add(Polynom p) // Methode zum Addieren zweier Polynome
    System.out.println("\np:" + p.getGrad());
    System.out.println("this:" + this.getGrad());
    if(p.getGrad() >= this.getGrad()) // Vorgehen falls p.getGrad() gr��er als this.getGrad()
      q1 = new Polynom(p.getGrad());
      grad = p.getGrad();
      for(int i=0; i<(this.getGrad()+1);i++)
        q1.coeffizient[i] = this.coeffizient[i] + p.coeffizient;
for(int i=(this.getGrad()+1);i<(p.getGrad()+1);i++)
q1.coeffizient[i] = p.coeffizient[i];
else // Vorgehen falls this.getGrad() gr��er als p.getGrad()
q1 = new Polynom(this.getGrad());
grad = this.getGrad();
for(int i=0; i<(p.getGrad()+1);i++)
q1.coeffizient[i] = this.coeffizient[i] + p.coeffizient[i];
for(int i=(p.getGrad()+1);i<(this.getGrad()+1);i++)
q1.coeffizient[i] = this.coeffizient[i];
return q1; // R�ckgabe des Ergebnisspolynoms
// Diese Klasse testet die Klasse Polynom
public class Test
public static void main(String[] args)
System.out.println("Grad eingeben!");
Polynom p1 = new Polynom(Eingabe.intValue());
p1.readCoeffizients();
p1.show();
System.out.println(p1.getGrad());
System.out.println("Grad eingeben!");
Polynom p2 = new Polynom(Eingabe.intValue());
p2.readCoeffizients();
p2.show();
System.out.println(p2.getGrad());
//Polynom p3 = (p2.add(p1));
//p3.show();
(p2.add(p1)).show();
Thanks for your help!

Ehm, this should really be obvious: because in the
first two cases you are using the constructor
and readCoeffizients(), whereas in the third
case you are only using the constructor.You?re right, but I initiate grad in the add method.Then look again: you don't! You are calling the constructor, but the constructor is not assigning grad in a proper way. If you are refering to the line grad = p.getGrad();this is in fact equal to this.grad = p.getGrad();But this.grad is not q1.grad (which is private). Assign grad in the constructor only (where it belongs) or better still don't use grad at all and derive the degree of the polynom from the length of the coefficients array.

Adhoc Query- problem with the output file format

Hi Gurus,
I have a problem in exporting the output of an adhoc query to Excel format.
The menu option I chose to export the report data into Excel is List>Export>Spreadsheet.
However,I think I've just pressed the wrong option to export my report and now I can't seem to change it from a HTML file option.
Can anybody help me correct this output setting.
Points assured for apt help...

Hi Sushil,
There are two ways to save the output in the excel format.
As you have mentioned, you can use
List -> Export-> Spreadsheet.
Then select table. Now the output will open in a spreadsheet.
The other way is
List -> Export-> Local File
Here you need to select the option spreadsheet. Then mention the path where you want the file to be stored. Also mention the format as .xls
Hope this helps
Regards,
Brinda

Problem with the Output Type and Transaction ME9F

Hi,
      I have an Output Type (xyz) and Program (abc).
      If for ME21N i give the output type ( xyz ) the n am able to get the Spool and
      Printout.
      If for ME9F i give the output type ( pqr) then am able to get the Spool and
      Printout.
      Problem is :---
      when am using O/P Type ( xyz ) for ME9F then am abel to process but am
      not able to get the spool and not even printout.
      I want to know where it can be wrong.
      It's a high priority object.
Kindly help me out.
Thanks,
Zia.

hi Zakir,
1.check the output type under
apllications 'EF' IN transaction NACE.
2.select that ef and press the push button output types .
3. now check ur output for is present here or not ..
just click the position button and give ur output type ..
4. when u find ur output type .. select that o/p type and click processing routined on the left side where u will see ..
when u do this
u ll see the details like
output type . the output type "
application . 'EF'
and the mode of medium .
1. print out
2. fax .
6. edi etc.
this is the way to check what are the mediums present for the output type ..
check whether u r <b>entries (xyz) and (pqr) are having medium 1.</b>
if its missing then assign it ..
regards,
VIjay

Problem with the output volume

I installed StartupSound.prefPane
http://www5e.biglobe.ne.jp/~arcana/StartupSound/BETA/index.en.html
on my macbook in order to control the startup chime's volume. Next I uninstalled it, because didn't like. Now, the output volume is not working; I cannot modify the level of volume on the Sound preferences (System Preferences). Any idea to solve this problem? Thanks in advance. PS: to uninstall this software, I did double click on the unistaller that software provides.
Sometimes the sound works but then turns intermittent ¿? what should I do? Thanks.
Message was edited by: HREsquivelO

Hello,
Try deleting this file. com.apple.audio.DeviceSettings.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot.
If that doesn't make a difference, locate this file. com.apple.audio.SystemSettings.plist
MacintoshHD/Library/Preferences. Same procedure.
Carolyn

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

The Micro Zen's with reinforced headphone Pl

I heard the Creative has released some new Micro Zen's with reinforced headphone plugs. I just what to know how to find out if the one your buying has this? Recently my Zen's headphone plug kinda stopped working and so I'd like to exchange it for the one that has the rienforced thing in it since it has been less than 30 days so I can return it.
thankz
Figgy

There's no real easy way to tell. Some people have said that if you take off the white top then you can see that there are two (or was it one?) screw that holds the top plate on.

Problems with the Zen Vision:M 6

I'm experiencing a lot hangs and lockups with my Zen Vision:M 60GB,
the newest firmware that is viable for the Zen Vision:M 60GB already
on my Zen Vision:M 60GB, firmware version .2.02e, sometimes the
clean up in the service mode works fine, had also a situation
that everything went so bad that it lockedup when I turned my Zen on,
had then to refresh the firmware and lost all my music on its hard dri've,
costed me hours to get everything back on it.
Please, Creative do something about these lockups bring new firmware out
that solves these problems!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please start supporting the Zen Vision:M 60GB again.

I use Widows XP Professional SP3 and Windows XP Professional x64 SP2 with medially .
I can't see why this matters because the problems are located at the player itself, I've got no
problems with moving files to the player or any problems with connecting the player with the computer,
I'm experiencing a lot of freezups of the firmware of the player, harddisk keeps running, it does that
till the battery is low or till I push reset, sometimes this doesn't help at all, the operating system at
the harddri've gets somehow damaged by the instability of the filesystem, reflashing the firmware helps
the. Problems appear to be a software problem with the firmware, the player went away for repairs once,
with this problem, they have checked the harddisk, harddisk was fine but the os crapped up it's self
somehow, know this because I asked them to tell me every thing what was wrong and how they solved this,
asked them also how I could fix the player myself? if it was no hardware problem.
They told me to reflash the firmware and format the dri've from the service mode out.

Software problems with the zen visio

hey,
i just got the zen vision m yesterday. very nice day.
today after finding out that the player works well i decided to upload some more music and pictures then i did yesterday, but everytime the zen media explorer hangs itself up i uninstalled all the software and then reinstalled it, but again i didn't work when it comes to the upload
i'm clueless, is this a common problem and are there any other software or a new uptdated software versions, which may help me?
i really really want that player to work, because the -2 hours i got with it were great
i got the zen m 30 gb working on windows xp home...
thanks a lot
jim
edit: it's the upload assistent who doesn't want to work anymore...
downloaded a update for the zen media explorer but nothing changed...

I use Widows XP Professional SP3 and Windows XP Professional x64 SP2 with medially .
I can't see why this matters because the problems are located at the player itself, I've got no
problems with moving files to the player or any problems with connecting the player with the computer,
I'm experiencing a lot of freezups of the firmware of the player, harddisk keeps running, it does that
till the battery is low or till I push reset, sometimes this doesn't help at all, the operating system at
the harddri've gets somehow damaged by the instability of the filesystem, reflashing the firmware helps
the. Problems appear to be a software problem with the firmware, the player went away for repairs once,
with this problem, they have checked the harddisk, harddisk was fine but the os crapped up it's self
somehow, know this because I asked them to tell me every thing what was wrong and how they solved this,
asked them also how I could fix the player myself? if it was no hardware problem.
They told me to reflash the firmware and format the dri've from the service mode out.

PROBLEMS with the zen sto

so the first problem with my zen stone i found was that no matter how much music i had on it, it would only play certain songs. for example, if i have 200 songs on it, it only plays abou 30 of them over and over....i tried using the online manual but that was NO HELP, it makes no sense when it tries to describe how to organize music/folders.
now i have another problem...my stone WONT PLAY MUSIC. i open the folder and click and drag files from itunes(like i did before) into the folder, and it loads them. as soon as i disconnect my player and hold down the play button to play, it blinks 3 times and nothing happens, and everytime i hit play after that it does the same thing..
please helP!

I use Widows XP Professional SP3 and Windows XP Professional x64 SP2 with medially .
I can't see why this matters because the problems are located at the player itself, I've got no
problems with moving files to the player or any problems with connecting the player with the computer,
I'm experiencing a lot of freezups of the firmware of the player, harddisk keeps running, it does that
till the battery is low or till I push reset, sometimes this doesn't help at all, the operating system at
the harddri've gets somehow damaged by the instability of the filesystem, reflashing the firmware helps
the. Problems appear to be a software problem with the firmware, the player went away for repairs once,
with this problem, they have checked the harddisk, harddisk was fine but the os crapped up it's self
somehow, know this because I asked them to tell me every thing what was wrong and how they solved this,
asked them also how I could fix the player myself? if it was no hardware problem.
They told me to reflash the firmware and format the dri've from the service mode out.

Micro Zen - problem firmw

Hello,
I have tried to update my firmware with the new one, but in the middle of the procees a bug has appeared. The procees was blocked and I have restarted the device handly.
Now when I connect it to my pc, Windows doesn't recognise him and the micro zen says " firmware problem" and goes directly on the recovery mode.... So I can't use it anymore..
What can I do?

Ok, I have tried to put the 2.0. firmware.
Now when i want to start my micro zen, on the screen appears "Firmware problem" and it goes automatically on the Recovery mode or, I think what you are calling the rescue mode. I have tried all, format, clean and even Reload OS, but the problem when i want to put a new firmware, my pc says that there no micro zen connected, and the option "update" is not accesible...2 days it like that, I can't do anything with my micro zen, becaus i always stay on that menu...
I think I'm going to bring it back to the shop.....
It seems hat problem happen's very often with the update...

Problem with Excel output format

Hi Guys,
I am creating a report in XML Publisher (not standalone). I am facing some problems could anyone please help me to figure out the issues.
Is it possible to have all three output format (PDF, HTML & EXCEL) exact (same aligned) only by creating a single RTF Template? I am facing the problem with Excel output format the output format of excel is taking excels cell formatting.
Example Numeric fields --> Right Aligned, text fields --> Left Aligned
One more issue with excel is -ve(negative) values are getting displayed in red and in brackets like ($13) (with red color).
Our client want excel output on priority.
Is there any limitation for excel output format of reports?
It is very urgent for us please help.
Any help would be highly appreciated.
Thanks,
Pragati
Edited by: user11237443 on Aug 27, 2009 1:22 AM

Hi Mahi,
Thanks for your response. But i could not understand how can we write wrapper program could you please give some light on this or provide some link it would be helpful for me:-)
I have read that blog for excel limitations but i have more question?
1) What about the negative values?
if any field is displaying negative amount then excel not displaying right value for that:(
2)How can we align header or data?
Do XMLP with EBS provide any solution for formatting in excel?
3) If for the alignment of numeric value we concatenate them with any special character then how can we perform calculation that field?
Here are so many formatting issues do we need to write any code in xml for that?
Please help.
Many Thanks,
Pragati

Micro Zen | problem with the output "ho

Similar Messages

Maybe you are looking for