MicroApp Menu asterisk and pound keys Question

Hello everyone,
As a CVP newbie, I need some help.
How to include * and # keys in Menu MicroApp for Configuration Param setting in VRU Scripts.
I want these keys to be e.g. "To return to previous menu, press # key, to listen previous message again press * key"
What do I do, beside entering parameters range 0-9 for options, how to set # and * to be valid options in menu Micro app?
Thank you
V

Hi,
you can achieve this by using ECC variable,, create one ECC variable called user.loopcount
Say for example if caller press * to repeat menu In CED node case 1: * if caller entered digits matches * then insert the user.loopcount to 0 in set variable and use if condition to check the loop count, please find the below sample for you understanding
Regards,
Srinivasan
Please rate if this help

Similar Messages

T430s or T431s? and a key question concerning the T431s mSATA slot

T431s or T430s?
First let me apologize for my English, sorry if reading through this cause you any headache…
I gave away my T410 (bad bad decision) the day after I got a i7 Yoga 13 with 256G SSD, and bought a M4 256G which I planned to put in the free mSATA slot, only to find out i can't live with that yoga keyboard and that huge off-center touchpad which gets in the way all the time a few days later... anyway, end up returned that yoga13 and is using my heavily abused limping T500 now with a replaced motherboard... I was looking to go back to thinkpad and buy a T430s right away but Lenovo announced T431s one day afterwards. now i dont know what to choose, although leaning towards T431s a little bit.
things i'm looking for in my next laptop: first X1C is not an option for me, I can’t accept that screen with high dot pitch.
l weight: less than my T410, it doesnt have to be light as an Acer S7 or Samsung 9, just reasonably lighter, and as slim as possible.
l Processing power: doesn’t really matter, anything i5 or i7, M or U… all fine to me, I can run Lightroom, DPP and video processing applications on my desktop and I don’t play games. 8G or more RAM is needed.
l Storage: comes with 256GB SSD or user upgradeable to 256GB SSD is an absolute minimum requirement, but I really prefer any flexibility to configure a second drive, HDD or SSD, is a big plus, preferably HDD as the second drive.
l Screen: wouldn’t mind squeezing my eyes on a FHD screen, but I can only settle on a 900p, afterall I’m looking for a thinkpad, have to live with that screen, right?
l Tough… every one of my laptop gets dropped once or twice… many many times in the case of my old T410… so it needs to be tough…
l Not much else…
So, T431s is lighter, slimmer, user replaceable 7mm SSD, mSATA available (a concerning question later), all good, and I like the new look. And I don’t care much about the indicators, lid lock, flipped logo or that new touchpad (I think I can manage, maybe…).
So what do I have to sacrifice if I choose T431s? removable battery, ultrabay for optical drive and HDD, full voltage cpu, and possibly a couple hundred dollars… since we don’t know for sure how much optional parts will cost in customized build, and of course the risk of buying an unproven, newly designed product. Did I miss any other key point?
If I didn’t miss many advantages that T430s have, I probably should go with T431s, it was all good until I found a video which shows how to disassembled a T431s (http://v.youku.com/v_show/id_XNTI5NzIxMzg4.html) and at about 4 mins in, it shows that the WWAN card is secured by a single retaining screw in the middle on the outer edge, unlike typical mSATA SSD which should be secured on the 2 corners of the board. Does this mean users can no longer install a mSATA SSD on T431s? if so, I can only have one 7mm SSD instead of having OS installed on a 256G mSATA, and have a 500G HDD to storage all the photos and videos, which I was intended to do, that maybe a deal breaker…
I don’t really understand these hardware upgrades, can some one please tell me for sure whether the mSATA slot on T431s, as shown in the video, can be used to intall a regular mSATA SSD. If I can, I’ll probably still struggle to make the decision, if it can’t be used to install SSD, T430s it is.
Any help is appreciated!
Kai
Solved!
Go to Solution.

thanks, yes, it's the new NGFF M.2, and the new form factor is a lot more complicated than the old mSATA slot, different dimensions for different storage size, and it maybe single side for WWAN, cashe drive, or double side for actual SSD perfermance...
if i'm gonna get a T431s, i'll just buy the 320G 5400RPM low end drive, make a recovery media from Win8, and reset to factory setting after intall a 512GB 840 Pro, or the much cheaper M4...

OS Level and License Key Question?

Hi Everyone, new potential Apple user here.
I am going to buy 2 Apple G4 notepads for our children. I know they will not come with an OS so I my question is, is it like Windows where you have a license key on the bottom and you can use the same CD to install the OS on both machines and just use the License Key that comes with the Laptop or will have to buy 2 copies of the OS one for each machine?
Next question, is what is the highest level of OS I can go to?
Sorry if the questions seem a little dull.
Thanks
Martin.

Hey Martin and Welcome to Apple Discussions,
I am going to buy 2 Apple G4 notepads for our children.
It would help to know which model you're buying, especially the CPU speed since that will determine which OSs can be run.
.. like Windows where you have a license key on the bottom and you can use the same CD to install the OS on both machines and just use the License Key that comes with the Laptop or will have to buy 2 copies of the OS one for each machine?
There is no "license key" in Mac OS X land ;<). Get used to not having to type those ridiculously complex keys in at the 4 minute mark.
With the single user license you can officially load on one machine. With the family pack you can load up to 5.
<div class="jive-quote">Next question, is what is the highest level of OS I can go to?
In general all the G4 iBooks will run Leopard so 10.5.8 updated. The 12" 800 Ghz will run Tiger so 10.4.11 updated. That's official but the installer can be hacked to run in that machine.
Richard

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

Menu Creation and Using the SELECT soft key

Hi,
I am trying to design a menu similar to the thumbnail menus available in most phone these days.what i want is a set of icons placed in a tabular format ie rows and colums. the joystick control can be used to navigate thru the icons and using the select soft key ie the middle button of the soft keys, the next set of forms can be displayed.
so far, i have created a form, used a few image item and used the Item's layout directive to arrange the imageItem as i want on the display. I can get the joystick to navigate between the imageItems however the select button doesnt fire any event.
I have added a command to each of the items and set an ItemCommandListener.
That approach seems to be working fine but it defeats my purpose. the reason being i had problems with the mapping of the command keys. For each display i had an option of going to the main menu and to the next screen. On the emulator it maps perfectly with the left key having the main menu and the right key having the "next form" button. But while implementing on the phone, the left key has the main menu but the right key shows "more options", when u click more options you get the "next form" button. This is happening in every form on display and makes it more tideous to use.
Thats why i was hoping to get the select button working if possible. Any help would be much appreciated.

Try searching J2mepolish.org plenty of work is done
with Regards
Rizwan

Basic Menu Button, Background, and a:hover question

Yes, I'm probably the newest DW CS3 person on this forum.
I've looked at many of the forum entries and haven't found what I'm
looking for...sorry.
I'm building a menu bar and would like the entire background
image for the button to show up when the mouse is hovering over the
menu list item. When I hover, the background only fills the space
behind the text and not the full button size. I've tried combining
Rollover Image but the Original and Rollover images are always
skewed one way or the other. There must be a fairly easy solution
but I haven't found it. Yes, I've ordered The Missing Manual for
DWCS3 and have viewed Total Training, but of course, there's much
much more to learn.
I actually did build a working menu with 8 items using nice
3-d images from Fireworks. Each button was a custom image with the
menu item included (like Home or Contact Us), which drastically
increased my web size. I'm at 625k with just the template layout so
far, no content or other images in the editable area. This seems
too large and so I feel I need to scale back my graphics and reduce
color palets, including the buttons for the menu. This is why I'm
here...to learn.
Your assistance is greatly appreciated,
Jim

On Sat, 4 Oct 2008 07:03:08 +0000 (UTC), "GadgetRepair"
<[email protected]> wrote:
>Yes, I'm probably the newest DW CS3 person on this forum.
I've looked at many
>of the forum entries and haven't found what I'm looking
for...sorry.
>
> I'm building a menu bar and would like the entire
background image for the
>button to show up when the mouse is hovering over the
menu list item. When I
>hover, the background only fills the space behind the
text and not the full
>button size. I've tried combining Rollover Image but the
Original and Rollover
>images are always skewed one way or the other. There must
be a fairly easy
>solution but I haven't found it. Yes, I've ordered The
Missing Manual for DWCS3
>and have viewed Total Training, but of course, there's
much much more to learn.
>
> I actually did build a working menu with 8 items using
nice 3-d images from
>Fireworks. Each button was a custom image with the menu
item included (like
>Home or Contact Us), which drastically increased my web
size. I'm at 625k with
>just the template layout so far, no content or other
images in the editable
>area. This seems too large and so I feel I need to scale
back my graphics and
>reduce color palets, including the buttons for the menu.
This is why I'm
>here...to learn.
>
> Your assistance is greatly appreciated,
>
> Jim
If you have looked aththe forum entries, you must have
noticed the one
single thing that is consistent for all questions:
The answer is in the code. Verbal descriptions, even screen
shots,
don't help anyone figure what is going on. What's the URL?
Win
Win Day
Wild Rose Websites www.wildrosewebsites.com
[email protected]

Satellite - randomly the arrow keys, question mark key and z key will not work

Sometime the arrow keys, question mark and z key work fine (like now) and sometimes they just don't work at all (like a minute ago). I will just be typing and they will work and then just stop working, then work again. They either all work or all do not work. This has been happening since about a week after I got the computer. It is so annoying. Can you please help me fix this problem? I have a Satellite T135-S1309.
Many thanks.

Hi,
I've posted recently about keyboard problem, and have tried everything as everybody else, finally and oddly :-) the solution for my problem was to reconnect little flat cable that connects keyboard and MB :-D shown in step 10 on the following link:
http://www.irisvista.com/tech/laptops/Toshiba-Satellite-X205/take-apart-laptop-2.htm
..so maybe your keyboard somehow strangely detached itself from mother-board just a bit and started creating all sorts of strange problems as mine... one cable line was without contact because flat cable was not attached properly anymore and mentioned keys stop working... I have also downloaded keyboard tester software that helped me find all keys and combination of keys that stop working ... so guys, try that and good luck!

Menu Exits and Function Exits. Questions.

Hi to all,
I got a question in User Exits.
Using the Tcode CMOD, I entered the project name and starting building the user exit for a practice. I selected the enhancement list and looked at the components, I can see the Menu exit and a Function exit.
I changed it like this,
I edited the component menu exit and gave a new text and symbol. I saved it, clicked on the function exit, and went to function builder to write my own include program. I did that and activated the project.
Now my question is that where to look for the menu in the main screen. Will it be stored somewhere or I can see in the pull down menu in the main screen. Once I see the pull down menu and the exits there, if I click, it should execute the add on functionality which I have mentioned in the fm include program in abap editor.
So where to look for the menu exit in the pull down menu? Are the steps which I am narrating are right or I am going wrong somewhere. Please guys, help me.
I will really appreciate you answers.
Regards,
   -Ashok Patel

Hi Ashok,
I checked it, and yes it should work. Here is how they are linked.
Screen 5000 of the program SAPLBPAR has this PAI module call commented out.
MODULE 5000_OKCODE.
Within this module you have a piece of code that is as follows
    WHEN '+003'.
      PERFORM BPDBANK_USER_EXIT_003 USING INDEX_BPDBANK.
Within this form, there is a call to this function module
CALL FUNCTION 'BPAR_X_BPDBANK_PROCESS'
       EXPORTING
            bp000_in   = bp000
       TABLES
            bpdbank_in = bpdbank_user
       EXCEPTIONS
            error      = 1
            OTHERS     = 2.
Within this function module is the call to your function exit.
CALL CUSTOMER-FUNCTION '003'
       EXPORTING
            BP000_IN    = BP000_IN
       TABLES
            BPDBANK_IN = BPDBANK_IN
       EXCEPTIONS
            ERROR       = 1
            OTHERS      = 2.
Since the original call to the module itself is commented out, I think that is why your code is not getting executed.
I cannot think of any other example that you can practice. Go to SMOD and do the drop down on Enhancement field. In the pop-up, click on the 'All Selections' button at the bottom with an arrow+ pointing down. You will see further options now. In the uncheck all the check boxes and check only the 'menu entries' checkbox. In the resultant list, see which one you can work on.
Hope this helps,
Srinivas

Mac Mini w/ Apple USB keyboard - question about home and end keys

I purchased a USB white Apple keyboard to go with my Mac mini.
My question concerns the home and end keys. When I put the cusor focus in a text field or text area, I would expect that hitting the home key would take me to the beginning of the line and hitting the end key would take me to the end of the line.
That's not the case?
If a vertical scrollbar is used in the window, then the home key takes me to the top of the window and the end key takes me to the bottom of the window.
Please forgive me, I've been on a PC for the last 10+ years, so I thought I should ask.
What key or key combo moves you to the start and end of a text in a text field or text area?
Thanks,

923/3369
Hi Todd,
Use the arrow keys with the command key (⌘):
command + left arrow -> beginning of the line
command + right arrow -> end of the line
command + arrow up -> beginning of the text
command + arrow down -> end of the text
Explore also the option key (⌥) possibilities, with the arrow keys:
very handy too.
Yes, the Home, End, Pageup and Pagedown keys are for controlling the whole document, not the text itself.
HTH
Axl

Satellite C50-A-15Q - arrow, question mark key and z key are not working

I have a Satellite Pro, C50-A-15Q. All keys were working fine yesterday, today I turn the laptop on and the arrow keys, question mark key and z key are all not responding. Any idea how I can fix this?
I have tried turning the laptop off and on, hoping (naively) that this would fix, but to no avail.

As Tom already wrote, it is not easy to say for sure if this malfunction is result of defective keyboard or maybe keyboard controller. In my opinion troublemaker is the keyboard itself.
Have you maybe updated BIOS or done anything that could be responsible for this?
I presume your notebook is pretty new model with valid warranty so best option for you is to contact nearest Toshiba service provider and ask for help.

I switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.

i switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.
I bought this off of craigslist with my christmas money, TODAY. i really need help, i have OS X experience from school, just not OS 9x. I need to reboot back to OS X asap. anything that may help is very appreciated. Thank You.
Chris.

Are you able to start up in Safe Mode?
http://support.apple.com/kb/HT1455?viewlocale=en_US
If this works you will see the normal desktop Once completely started up in Safe Mode, try to restart normally and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless it has been renamed). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if you are able to do a little hard drive maintenance to help things out.

TS3048 I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped. It seems as though the line of number keys along the top aren't actually doing what is printed on them. Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes. So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key. The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along. Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead. It is going to drive me mad if every time I want to type something it is a guessing game....! What do you suggest - question mark

I am using a licensed CS3 Chinese Version and Illustrator shows question mark on the menu bar. iMac,

I am using a licensed CS3 Chinese Version and Illustrator shows question mark on the menu bar.
iMac, OS X Mountain Lion (10.8.2)

$$$/_MBAR/Mnu showing in Menu Bar - IllustratorHints
Mylenium

Owners manual Download and keys question.

3000 N100 Notebook (0768-2CU)
Is there a full owners manual download anywhere?
What are the 1-2-3 on the J1,K2,and L3 keys for?

Hi
You may download the Hardware Maintenance Manual - Lenovo 3000 N100 & Service and Troubleshooting Guide - 3000 Lenovo N100 from the below mentioned links . These documents have complete info about the product and Keys
Hardware Maintenance Manual - Lenovo 3000 N100
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/42x3553_03.pdf
Service and Troubleshooting Guide - 3000 Lenovo N100
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/41w7817_revised.pdf
Hope This Helps

Just bought a 2tb external hard drive with the intention of moving my iPhoto data files on it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app? Do I need to point iPhoto to this new location?

Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
Do I need to point iPhoto to this new location?
Thanks!

Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
Assuming a Managed Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

MicroApp Menu asterisk and pound keys Question

Similar Messages

Maybe you are looking for