MicroCell not working after download of ios5

Since downloading ios5 can't connect to MicroCell no matter what I try. Been on the phone with AT&T all morning.

I downloaded os 5 to my iPhone 4 and the "searching" started appearing instead of "microcell." like most of the folks who have experienced the problem, I can get "microcell" to display on iPhone by going to airplane mode and back. However, on further exam, I've found out that the iPhone remains connected to the microcell even though it says "searching." the next time anyone reading these posts finds that their microcell connection has gone to "searching," just make a call and it'll go through AND the "microcell" then reappears and replaces "searching."
I also called my iPhone while it read "searching" and my iPhone did ring. So, it appears (at least for me) that the microcell + iPhone connection is fine. But, since the os5 download, it just occasionally pops up the "searching" message with no logical explanation. Nonetheless, you'd think AT&T and Apple would get a fix for this annoyance.

Similar Messages

My sound on FaceTime is not working after downloading iOS 6 ??

Ever since I have downloaded iOS 6 when I am on a FaceTime call nobody can ever hear me. Has anyone else had sound problems since the new update ??

Re: My sound on FaceTime is not working after downloading iOS 6 ??
Apr 8, 2013 12:16 AM (in response to B69B69)
same issue here... And a restore didn't do any good either.
Try backing up your information to iTunes, and Restore your devices as new with no content on it what-so-ever. If the issue persists after that, this may be a hardware issue. Check your Mic's for debris, and remove the case you have on the device as well to see if you have the same results. Then contact Apple Support if all else fails.

Google Chromecast does not work after downloading Blackberry Link

Google Chromecast does not work after downloading Blackberry Link.
Both don't work in tandom at the same time.
Some elements of Blackberry Link are interferring with Google Chromecast's detection and casting.
Please rectify the problem.

Yes they are not compatible. I do not have either program so could not try anything.
Try running one in a different compatibility mode.

My sound is not working after downloading windows 10

My sound is not working after downloading windows 10 please can you help me?

right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

Script does not work after download

Hi,
I have build a form in SAP enviornment using Adobe Life Cycle designer, while designing I have been using XML datasource and wrote scripts for different events on the elements of the form, the script works perfectly fine while designing, but fails when downloaded through an application. I downloaded form and to check if the scripts are still there or not, the script was present, but would not simply execute, for ex. while on clicking of button, certain fields on the form are to be hidden, but this would not work.
ex. this.parent.parent.StaticText39.presence
= "hidden";this.parent.parent.STELL_STEXT.presence
= "hidden";
The above scripts work perfect durong designing the form, but would not work after form is downloaded through an applciation. Could any one have answer to wierd behaviour?
Regards,
Shishir.P

Was the form saved as a dynamic XML form?
While the default preview in LiveCycle Designer may be set to dynamic XML form, thus providing the dynamic behaviour you are seeking, if the form is not saved as a dynamic XML form Adobe Reader and Acrobat will not respect the changes to the presence property at run-time.
Steve

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

The zoom in the cam its not working after downloading IOs5

HI
after downloading after IOS5 software the zoom of the cam its not working and also the option of opening the cam from the lock screen also not avilable

Once you see the lock screen, you have to double-click the home button to access more controls.
Not sure about the zoom. It works for me :/

Wifi is not working after update to ios5.0.1 in my iPhone 4s

Recently I update to new version of ios5 after that my wifi connectionis not working .can any one resolve this problem please?

I had the same issue before. But not any more....
Step1: Turn off your phone.
Step2: Unplug the router from supply.and turning off is different. So unplug it.
Step3: turn on router and phone back.
Try connecting now; which should work ....
This fixed my phone
Check it out.....

Flash Player not working after downloading new version

I downloaded Flash Player 10 and it does not work.I am using Windows XP and Internet Explorer. I have tried the trouble shooting. I have made sure its enabled under Active X and it does not work at all now. I have tried to download Flash Player 9 and now that will not download. I regularly use site that require Flash and I am shut down until I can figure out what is wrong. Please help.

I have the same issue after I was prompted yesterday to upgrade my Flash player. With the new version, 2/3 of Flash pages do not work. But 1/3 do work !
Example of page that does not work with new version of Flash :
http://www.youtube.com/ (the whole site)
http://www.adobe.com/fr/products/flashplayer/ (Adobe's official Flash page !)
Example of page that does work with new version of Flash :
http://www.voleursdechevaux.be/page_flash.html
On first glance, I would say that Flash loaded through JavaScript fails. Only Flash embedded through HTML works. But I am not competent enough to discover why.
Here is my current configuration (the version test at http://kb2.adobe.com/cps/155/tn_15507.html works well) :
Player Version : WIN 10.0.22.87
Debug Player : no
Operating System : Vista
Browser : Internet Explorer 8
Locale : French

USB ports not working after downloading I tunes 10.1

After downloading I tunes 10.1, as prompted by I tunes, , I got the device not recognized message for my IPOD. Also, a bonjour error message. I un installed and re installed as per instructions and still had the problem worse-none of the USBs are working. They were working before I downloaded the new release of I tunes.
I believe this is a bad download-any idea how I can fix this problem?

Please click on the first link first and then try the second link if the first one doesnt work
Intel USB 3.0 Host Controller Driver
OR
Intel USB 3.0 Driver for Intel® NUC
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Epson XP-810 Not Working after Downloading Yosemite.

I have an Epson XP-810 printer. After downloading Yosemite, the printer has stopped working with all of our Macs. It connects to the wifi network. The printing job starts. After that the job box says looking for the printer. I have checked for all updates, I have downloaded all drivers from Epson, I have turned off the printer and the computers, nothing works. I have deleted the printer and re-installed several times. It shows up in the printer & scanners box but it still will not print or scan. Does anyone know whats up?

Well you've tried just about everything. Just curious, after I installed Yosemite I had an update notification for the latest Epson driver for my XP-410. Not the same printer of course, but did you receive an Epson driver update notification from the App Store?
You can try to "reset the printing system". In the System Preferences Printers & Scanners window press the Control key while clicking in the printer list. Then select the reset choice.

Finger Print Scanner is not working after downloading new operating system 8.1

hi,
recently i have installed new OS windows 8.1 for my HP PAVILION DV6 laptop, but my bluetooth and finger print scanner is not working. can any one suggest me solve my problem..
txs
best regards
karim

Hi @sam1211 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 Notebook and Bluetooth and HP Simplepass complications since doing a Windows upgrade. Here is a link to the HP Support Assistant. Just download and run the application. Just to make sure all drivers and software are updated as well.
Here is a document on troubleshooting and using Bluetooth if needed. Under the tips for finding a Bluetooth device, there is a section on making sure the wireless communication is turned on. This is an important section.
Here is another document with some great information about Bluetooth fixes.
Here is a link to troubleshoot the HP Simplepass software.
The HP SimplePass Identity Protection Software must be updated to v8.00.57 or later. Here is a link to download the latest. You will have to uninstall the old software.
Hope this helps you with the Bluetooth and HP Simplepass.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Iphone 4 vibration not working after upgrading to ios5

Hi,
I have upgraded my iphone4 iOS from 4.3.5 to iOS5. Then onwards my phones vibration seems not working. I tried with restoring with itunes but doesn't helpful to me. Could anyone face this issue/any resolution.
FYI... apart from vibration, remaining alerts are absolutely working fine.
Thanks,
Bala K

Solution found: iphone 5, iOS 7.0.6
Settings > General > Restrictions > (enter passcode) > ...scroll down to "privacy" section and select Microphone > Tick "Allow Changes"
Then open Skype App, and it will request access to the Microphone > Allow
Note, on this screen you have the option to disable all restrictions, or Allow (un-restrict) only specified Apps (e.g. Siri).
Hope this helps.

My wifi and bluetooth funtions are not working after downloading iOS7

After downloading the iOS7 yesterday I tried using my Bluetooth but it wouldn't turn on... Now I just noticed that my WiFi will not move to on either... Anyone else having this problem? or does anyone know how to fix it???

I never had any issues until ios7. It happened as soon as I updated, so it has to be a software issues. From what i can see, people who have this issue are all 4s users. This shouldnt mean a hardware issue, but that the 4s is incompatible with ios7!
Regarding recent ios6 upgrade.. I hadnt upgraded so I wouldnt know what that would have done to my phone, but it cant be acceptable. I cant do everything on cellular network. It costs too much.Smartphones should have wifi, especially for travelling!
Are you really accepting that as an excuse... hardware issue.. get a new phone?!
Fair enough... after 4 iphones Ive been quite curious what the fuss over Samsung is all about....

My restrictions passcode will not work after downloading the latest update

After downloading the most rescent update, I could not go into my restrictions and make changes. Passcode failed.

So, you've forgotten your restrictions passcode. Next step is to reset your device to factory settings.

MicroCell not working after download of ios5

Similar Messages

Maybe you are looking for