Micrófono activo para codecs serie C ( C40 - C60)

Buenas tardes amigos 
la pregunta es: 
es posible transformar un Mic Table 20 de la serie SX para ser usado en un Codec C40? 
la idea es que encienda el indicador del Mute (en rojo) y el indicadro de desbloqueo (verde) 
o en el mejor de los casos si existe un mic para la serie C que haga lo mismo que el Mic de la serie SX
agradezco sus comentarios 
Raúl Navarro 

Hi Raúl,
No, it is not possible to use the SX20 table microphone, and keep the Mute function operational, on a C40.  The C40 uses a balanced XLR input which does not include any of the Mute functions, and there's no way to do it with a standard microphone.
You would need some external device to send API commands to the C40 or to replicate the IR commands for pressing the mute button on the remote.
As far as I am aware, there is nothing freely available on the market that does this out of the box.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Similar Messages

  • Buenas Días, porque el micrófono de mi Ipad no funciona? Porque razones?

    Buenas Días, PORQUE EL Micrófono de mi Ipad No funciona? Porqué Razones?

    Tu iPhone está en garantía. Traiga a Apple o un proveedor de servicios autorizado de Apple para la evaluación y sustitución probable. Será reemplazado sin la garantía siempre que no haya daños usuario.
    ¡Mucha suerte!

  • Problema Audition con WASAPI y micrófono USB

    En Audition con WASAPI no consigo hacer funcionar mi microfono USB, con la tarjeta de sonido seleccionada como dispositivo no me reconoce el micrófono para mapearlo y si intento seleccionar el micrófono como device WASAPI se deselecciona automáticamente. ¿bug?

        Esto se debe generalmente a Audition perder el contacto con la interfaz de la tarjeta de sonido o el audio. Es necesario comprobar en Preferencias / harware audio que se ha seleccionado la interfaz correcta. Si se están ejecutando otros programas que pueden hacerse cargo de los controladores de audio y dejar de Audition de reproducción.
    Translated by Google.

  • Lenovo Z50-70 no funciona el altavoz ni el micrófono

    LLevo 4 meses con el portátil y funcionaba todo perfectamente pero en las últimas semanas, el altavoz ha dejado de escucharse y el micrófono igual... En los ajustes están habilitados, en principio todo correcto pero no van.

    Intenta descartar tema software antes de pensar que sea un `problema de hardware, en los dispositivos de reproducción y de grabación se muestran los dispositivos predeterminados (lo mencionas mas arriba ,me parece) pero da clic derecho en esa ventana , activa dispositivos des-habilitados habrá alguno?
    Sin ir muy y aunque a través del auricular arroja sonido, en administrador de dispositivos existe algún problema con el controlador de audio , aquí https://support.lenovo.com/es/es puedes encontrar el controlador para tu modelo y sistema operativo.
    Has instalado algo últimamente? qui-saz alguna actualización de Windows?. el problema se puede atribuir a esto.
    Mantienes el sistema de fabrica?, tienes un punto de restauración? si no tienes un punto de restauración del sistema y mantienes el sistema de fabrica puedes aplicar el recovery pero este elimina todo en C , información sobre la restauración aquí
    Un saludo.
    @Antony_Vamu
    Comunidad en Español  English Community  Deutsche Community  РусскоязычноеСообщество
    Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

  • He instalado Skype en mi iPod Touch y me dice que necesito conectar un microfono, cuando conecto los cascos de apple con micrófono incorporado me sigue diciendo que necesita un micrófono, es como si no lo detectase?

    He instalado Skype en mi iPod Touch y me dice que necesito conectar un microfono, cuando conecto los cascos de apple con micrófono incorporado me sigue diciendo que necesita un micrófono, es como si no lo detectase, que le pasa?

    Google translate:
    I installed Skype on my iPod Touch and tells me I need to connect a microphone, when I connect theheadphones with a microphone apple keeps telling me I need a microphone is detected or not, what happens?
    Is the plug fully inserted in the iPod?
    Does the mic work with other applications?

  • Problemas para ver series.ly

    hola!! acabo de comprarme el macbook air, y veo que no me deja ver los videos de los distintos servidores de la página series.ly. ¿alguien sabe cuál es el problema? graciaaaas.

    Bem para poder ver vídeos em qualquer site você precisa ter instalando o Adobe Flash Player que e padrão para rodar a maioria dos vídeos e jogos na internet. Depois de ter instalado será possível rodar os vídeos e jogos sem problemas. Esse programa e achado facilmente para baixar gratuitamente na internet.

  • Cheque printing using MICR fonts on HP P3005n series

    Hi,
    I am doing a HCM implementation on ERP 6.0 ehp3 server. We need to print cheques using the MICR fonts on HP P3005n printer.
    I found that MICR_C and MICR_E fonts are already installed in the system. But when we try to print, the MICR characters are not getting printed.
    I have tried with different device types like TROYMICR, HPLJMI, HP5MI, ZHPP3005 but no luck. The printer uses the toner MICR-THN-51A
    Where could be the problem? Do i need to do some more configuration in SAP or is printer needs to be configured?
    Please help me as we are in testing phase and as the cheques are not printed we are stuck.
    Is it necessary to use TROY or Jetmobile printer to print MICR characters?
    Your inputs will be highly appreciated.
    Thanks

    Hi Naithan,
    If you are facing this problem pls install HP default printer in SAP. I hope you will not getting this problem.
    Can you tell me the cheque prining setting in DMP printer or Laser printer. Please check this with your abaper programmer. If setting in DMP then you have to use DMP printer.
    Regards,
    Anil

  • Cisco Telepresence SX and C-Codec series- Presentation onconnect improvement

    I found that the new auto-wake on detected presentation source introduced in the TC7 software version is stopping me from improving our meeting rooms.
    I would like to move away from having 1 vga cable for Cisco and 1 for direct connection to projector, and instead only have 1 HDMI cable that sends signals to both, using a HDMI splitter.
    But that won't work, as this new auto-wake function wakes up the video system from standby even if people are only going to use the projector.
    Why am i not just running all presentations through the video systems, you may ask?
    Well, a lot of people do not like having a camera turned on them when they are just going to present something, but not use video conferencing.
    And adding a expensive crestron system for a simple small meeting room is not an option.
    So the suggestion:  Give us an option to turn off the auto-wake on presentation source connect.

    Thank you for the information.  I no longer work at that company where the installation occurred so I can't test it.  But this information will be useful for future installations if I run into the issue again.

  • C40/C60 TC upgrade

    Hello,
    We are currently upgrading the software on all of our Cisco C40 and C60 video codec's to the latest version TC7.2
    Our video units are all part of integrated rooms using Crestron devices.
    Can anyone please advise if there have been any significant changes in the API which might impact the communication between the video codec and the Crestron devices.
    Thanks,
    AK

    To make an update to my post that Jens has directed you to, there is a newer security advisory than what I linked to in that discussion that will provide access to newer C Series TC software, cisco-sa-20140926-bash.  This is if your codecs don't have active support contracts.

  • SX20 connecting usb camera / why no support for C40,C60,C90?

    Hi, i noticed that the Cisco SX20 running software versionTC6.2.0 now supports usb cameras. Looks like UVC-camera drivers are loaded with the sx20.
    I tested it with HD Precision USB camera and it worked fine. (Mainvideo source: 3).
    I was not able to find any information about this new feature in the release notes so i am guessing its not official yet?
    I noticed that C40 with TC 6.2.0 does not have the same option available. Is the support comming for C-series aswell?
    This feature might come in handy when you need a second camera temporary or the main camera breaks.
    br. Tom

    hi Tom,
    The release note does have the information for the USB video input source.
    SX20: xStatus Video Input Source 3 Resolution Height
    SX20: xStatus Video Input Source 3 Resolution Width
    SX20: xStatus Video Input Source 3 Resolution RefreshRate SX20: xStatus Video Input Source 3 Resolution FormatType SX20: xStatus Video Input Source 3 Resolution FormatStatus SX20: xStatus Video Input USB 3 Connected
    SX20: xStatus Video Input USB 3 SignalState
    however yes i was not able to find a formal update on this part.
    cannot comment on the USb usage on C series as the ports are not presently active however on the Sx they are used for as serial interface.
    May be we can expect in furture for C series however  its (may be)
    Regards
    Ravi kr.

  • Como conecto un equipo adat a la imac para grabar música?

    Mi pregunta es básicamente porque soy nuevo en esto de las grabaciones caseras.  El caso es que compre un equipo Beringher Ada8000 que se supone es un preamp para grabaciones de 8 canales simultáneos, pero mi problema es que no tengo la menor idea como hacerlo funcionar con mi imac.  Se que el preamp tiene una salida y entrada ADAT.   Alguien podría decirme como hacer esto?  que me falta?  gracias.

    Hola marcococa,
    También estoy usando Google Translate, así que por favor tengan paciencia conmigo.
    iCare es correcta, sin embargo, la Saffire Pro 24 tiene 8 entradas de línea, sólo hay dos entradas de micrófono. Si desea conectar 8 micrófonos, la Saffire Pro 40 sería mejor para usted. Usted podría entonces grabar todos los 8 micrófonos simultáneamente en Garageband.
    Por favor, hágamelo saber si usted tiene alguna pregunta.
    Saludos cordiales,
    David Tichauer // Soporte Técnico de Focusrite

  • Autorizacion para Crear Embalaje

    Hola a todos, el escenario es el siguiente,
    1.-Se crea la factura de cliente.
    2.- Se confirma el deposito de esa factura.
    3.- Se quiere crear una autorizacion para que cuando envios haga uso de la opcion embalaje de SAP al actualizar el doc pida autorizacion a otro usuario(el que confirma el deposito) de este modo envios no despacha nada sin tener autorizacion.
    La tabla de embalaje veo que es la DLN7/DLN1 pero no se como ligarla a la OINV para crear un query y poder disparar la Autorización.
    Gracias.
    Alessandro.
    Edited by: Alessandro Santinelli on Dec 8, 2009 10:29 PM

    Estimado:
    No tengo conocimiento que se pueda generar un procedimiento de autorización al "actualizar" el documento...
    Una idea que creo podría ser de utilidad sería la siguiente:
    - Puedes crear un campo de usuario en la factura de clientes llamado por ejemplo, "autorizacion".
    - Se fijan opciones para este campo en su creación (valores posibles), estas opciones serian "No Aprobado" y "Aprobado"
    - Por defecto este campo siempre aparece como "No Aprobado"
    - Este campo no aparecerá activo para los usuarios que tendrian que solicitar autorización en tu modelo.
    Aquí viene lo interesante....creas una validación por transaction notification (SQL), la cual lee el campo de usuario y cuando reconozca todo lo relacionado a tu requerimiento, más la opción "No Autorizado", no permitirá que el documento factura sea actualizado.
    Esta validación enviará un mensaje indicandole al usuario lo que ha sucedido, además de indicarle que debe grabar el documento como preliminar, y enviarlo al usuario superior vía mensajería interna.
    Una vez que este documento sea enviado al usuario superior..este procederá a cambiar el estatus del campo de usuario a "Aprobado", pudiendo ahora el usuario que crea el documento actualizarlo sin problemas
    Chequealo....te reitero que es una idea frente a un tema que me parece no puede ser resuelto en base a lo que estas planteando
    Saludos Cordiales,
    Edited by: Paul Ponce on Dec 13, 2009 4:09 AM

  • Configurar Idle para telefonos ip Cisco 7945

    Hola,
    Por favor si alguien me pudiera colaborar con este tema, estoy tratando de configurar una Imagen para los telefonos Cisco de la serie 7945 en el campo idle, para que despues de un tiempo de inactividad se active el logo de mi empresa por ejemplo. ya lo hice con los telefonos de la serie 7940, pero he tenido problema con los 7945, veo que el telefono llega al servidor web y hace la peticion, pero al parecer no encuentra un archivo de imagen adecuado para publicar, alguien sabe que tamaño y formato debe tener la imagen o alguien sabe los pasos para cambiar el background a todos los telefonos o configurar el Idle para la serie 7945.
    Mil gracias por su valiosa colaboracion.
    Saludos,

    No es posible cambiar el background de todos los telefonos de manera nativa con CUCM, hay varios metodos y todos ellos han sido ya discutidos previamente en CSC, solo tienes que buscar.
    Si vas a preguntar en español, te recomiendo entonces lo hagas en la comunidad de dicho idioma.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Subir series por el DTW

    Buenas tardes amigos, mensualmente tengo que ingresar un promedio de 55 series y después tengo que asociarlos a los documentos respectivos, por lo quisiera saber si se puede utilizar el DTW para cargar estas series, he revisado y no he visto plantilla para estas series que se guardan enla tabla NNM1, si no existe alguna plantilla para subir esta data se odra generar alguna plantilla que ayude en esta carga?

    Hola Jose,
    No existe ninguna plantilla en DTW para subir las series de documentos.
    Esta tabla no tiene ObjecType.
    Saludos,
    wuilmer Venegas

  • Question if Version TC6.2.1 for C Series is also affected

    Hello,
    our endcustomer has some endpoints (C40,C60) which all run Software Version TC6.2.1. I can not find this Version in the affected or non affected list. Could you let me know if it is affected and if yes, which fixed Version would be the best to update?
    Thanks and best regards
    Stefan

    To be perfectly honest... I've gotten different temp readings everytime I've changed a BIOS in my Neo2. No matter how diligent that have followed correct flashing procedures (or not). I used to upgrade frequently, just because I could. Now I just stick with what works on my kit.
    For example when I went from 1.5 to 1.8 (that was supposed to report "correct" temps), instead of my 1.8 reporting lower temps from 1.5 (like just about everyone else), my reported temps increased. Even though the settings/voltages etc., between the two were unchanged.
    Go figure.  
    It just seems that MSI never got it's collective hands around temp reporting on the nf3 chipset, no matter what fixes they claimed.
    I've begun to take the temp reporting with a grain of salt - I know that I've got plenty of cooling with the proper amount of Artic Silver on all applicable surfaces, I don't run crazy voltages, got plenty of airflow through my case & my system is stable.
    Only if I see a temp rise over a short period of time, do I become concerned - means it's time for a cleaning!

Maybe you are looking for

  • Text determination procedure with sales doc type

    For the Sales Doc type 'OR' , I am getting TEXT automatically in the Sales Order Header data , TEXT tab page. Can Any one tell me how can I remove the text, when i create sales order. Or please can any one give me the document or link or explain how

  • Create New Detail Rows

    I have a jsp page with Master-detail tables. My current create new row button has to set current on one detail row to be able to create a new row. I have some master rows have no detail items. So my create new row button won't show up.How can I creat

  • Problem caused from disappear my unit number.

    Hey, I'm Verizon user got two of iPhone. Beginning is like this- I didn't receive a bill in May. Some Verizon guy called and told me that there is no unit number in my address. so the bill returned. so I re-enter my unit number over internet. Next mo

  • Drawing editable charts

    Hi, I have been working on a project management tool and I need to draw some charts like gantt and pert. I want them to be editable like when the users drags a task it should extend its end date and etc. What's the best approach I can take? Do you kn

  • DAQ Assitant Express VI Wizard won't run if not administrator

    Running LV 7.1, DAQ Assistant Express VI Wizard won't run if not logged in as administrator. I've given full permissions to the NI folders for Everyone to see if it was a priveliges error but it didn't work for this problem. What would need to be acc