Microphone +20 Boost keeps gets unchecked after rebooting pc..

Everytime I reboot the mic boost keeps getting unchecked. I have the latest drivers for X-Fi and Vista 64 SP. Please help.......very annoying!

But, there is a catch : if You're using PC's case front panel connectors for headphones(for sure Audigy, don't know with X-Fi, but probably the same result) and You'll prevent cthelper from starting, it will disable autodetection of headphones by Your card.
It was so in my case.
However, I confirm - removing cthelper from Your startup really helps Your Mic

Similar Messages

Airport WEP keeps getting lost after reboot

Every time I reboot the WEP connection is lost.
How can I set this up so it stays after a reboot and connects automatically?
Thanks

Delete the WAP from your list of preferred networks and also delete it from your keychain using Keychain Access. Then re-add. I had to do this for bith a WPA and a WPA2 access point. Funny thing is that after upgrading to 10.4.8 it took two days for the WPA account to start misbehaving and another 4 days till the WPA2 one started dropping. Deleting completely and re-adding them fixed it both times.

Sync contacts and calendar options keep getting unchecked

The options to sync my Outlook contacts and calendar keep getting unchecked each time I restart iTunes. When I recheck them and attempt to sync, I receive a message stating that
"The information on the iPhone is synced with another user account. Do you want to sync this iPhone with the information from this user account instead"
It then asks if I want to "Merge Info" or "Replace Info". I'm not sure how to proceed, since I don't want to lose any data or end up with a bunch of duplicates.
How can I stop this from happening? Any ideas?
I truly appreciate your assistance. Thanks.
Mike
Message was edited by: moznmar

Sounds like you sync your phone between two different computers? If this is the case, the options unchecking themselves seems to be an intentional thing by Apple, I'm thinking to prevent an accidental "oops" overwrite of information if auto-sync is active.
You can choose the "merge" option and everything on your phone (contacts and calendars, but NOT music) will be merged with everything on your computer - this is, everything will end up in both places.
You can only sync music with one computer, however, so make sure you keep the music options unchecked on the computer you don't sync music with.
-SB

The password file is getting corrupted after rebooting the standby database

Hi,
The password file is getting corrupted after rebooting the standby database.
Since the databases are not in sync, I had to copy the pwfile from primary to standby to make 'em sync.
(BUT.... the pwfile is not getting corrupted every time I reboot the standby by)
Could somebody please explain the reason for the pwfile on the standby database getting corrupted while rebooting ?
Env: Oracle 11g on Windows 7
Thanks in advance

Moderator Action:
This thread was originally posted to the Oracle/Sun Servers HARDWARE forum.
This is definitely not an issue related to any hardware components.
... it's now moved to Database General Questions, hopefully for closer topic alignment.

Why does my storage keep getting filled after deleting everything?

my storage keeps getting filled after I delete most of my apps, photo, etc. Im pretty sure it had something to do with the new update because it was fine before. please help its really bugging me and I cant even go on some of my apps because I don't have enough storage

While it's normal for your charger to feel hot due to its function, sometimes there's too much heat.
If your charger becomes so hot that you cannot touch it or you note a strange smell, your charger is malfunctioning and should be replaced.
A charger that malfunctions could damage the iPad battery, which also may need a replacement.

Every time I launch the browser the popup blocker option is unchecked. Why does the pop up blocker keep getting unchecked every time browser is launched?

Every time I launch the browser the popup blocker option is unchecked. Why does the pop up blocker keep getting unchecked every time browser is launched?

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

Workflow for PO-Event Linkage get unchecked after making Purchase Order

Hi,
I have a client reqiirement for setting Workflow for Purchase Order.
I have done all the settings for PO Workflow. I am getting the mail for the first time but from the second PO onwards I am not getting the mail.
When I checked the settings, the Event linkage in SWETYPV gets unchecked for BUS2012 Object Type automatically after making the first PO.
Again when I activate that, I am able to get mail for the first PO only. From the second onwards, no mail is triggered.
Could anyone suggest?
Thanks,
S.Raghavan
Hi,
I now have changed the "Behavior Upon Error Feedback" to "Mark Linkage as having Errors" in SWETYPV
After this change if I make a PO, the link doesn't get break but "Receiver Status" shows "Errors".
I could also see the overview of errors in Transaction code SWEQADM. It shows 3event with Errors and 1 linkage with errors.
I do not know in which event error is there and in which linkage error is there?
Can anyone help to see the events and linkage where error persists?
Edited by: S.Raghavan on Aug 30, 2011 6:22 PM
Hi all,
Any suggestion for the issue posted?

In SWDD select WS 20000075 in the first task assign agents(users, ie create u r own users),
without user IDs(as u r step 2).if u design "organization plan" then userID's r assigned (like manager,supervisor, clerk etc.,)
try it

Pagefile gets deleted after reboot

I have moved the pagefile to another partition and left a small piece on the system drive:
C: (Windows) 200-500 MB
B: (Temp) 4000-16000 MB
When I set the pagefile size, the pagefile gets created immediately, but after reboot it gets deleted again and remains only on the system drive. So after reboot, there is only 200 MB pagefile, not 4200 MB. And the total available memory is only a little
bigger than the amount of RAM, not 16 GB as it should be.
What is wrong? Am I missing something?
I have Win7 Pro SP1 x64, and a lot of free space on B:. Both partitions are on the same SSD disk.

Hi Xars
Thanks for your digging and we found similar cases with yours,so I tested on my own machine and turns out it is actually related to the Drive letter. Since The letters A and B are usually reserved for floppy disk drives, it's not recommended to
assign A and B to anything other than a floppy or floppy substitute even you do not have a floppy disk drive installed. I suppose Windows might not let you if you do this thinking "putting a pagefile on a floppy disk!"
We found sort of workaround for you but it still takes a lot of works, and it even need to reformat you hard disk.
Therefore, we recommend changing driving letter and we think it is the best way to avoid this kind of issue.
About Change, add, or remove a drive letter(Windows vista and 7 )
http://windows.microsoft.com/en-us/windows/change-add-remove-drive-letter#1TC=windows-vista
You could refer to similar case “Pagefile on a volume that uses "A" or "B" as the drive letter”
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/pagefile-on-a-volume-that-uses-a-or-b-as-the-drive/fdac6f23-a34d-e011-8dfc-68b599b31bf5
Regards

Keep getting message after updating BB??

I recently updated my blackberry...my BBM and App World...and now ever since I've done that I keep getting a message "You are attempting to open a secure connection, but the server's certificate chain is invalid" then it asks if I want to "Continue," "Close Connection," "View certificate," or "Trust certificate." If I click Continue or Close Connection it keeps popping up about 3-10 times before it goes away for a while and then comes up again. If I click Trust Certificate then it asks "Key Store Access. The following application is requesting access to your Handheld Key Store. Please enter your key store password: ... Vendor Name: Research in Motion Ltd. Application Name: Blackberry Messenger"
It seems to be doing this when I'm not using my phone at all, sometimes when I'm using BBM, or when I leave/enter my wifi (although the message will also continue to pop up even if I'm nowhere near a wifi connection).
I'm assuming this is because of my BBM...
So...can anyone help me please? It's very annoying!!
Thanks!

Hello Squishy
Welcome to BlackBerry Support Forums
At first I suggest you try those steps in a sequence :
1- Register your Handheld .
KB00510 : How to register a BlackBerry smartphone with the wireless network
Wait till a Registration messages comes in your message box.
2- Resend your Service Book
KB02830 : Send the service books for the BlackBerry Internet Service
( Wait till a Registration Message comes in your message box for each email that you have configured on your device )
3- Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back
If error persist then you have to follow this Knowledge Base :
KB15204 : Wi-Fi enabled BlackBerry smartphone prompts the user to trust a new BlackBerry certificate when connecting
Please try it and let us know.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Uninstalled Firefox. Want to reinstall and no matter what I do, keep getting the must reboot to complete uninstall

I bought a laptop from a friend. It is running windows7. He had firefox on it but uninstalled it and cleared his hard drive before he sold it to me. Its a new laptop but he went mac so I picked it up. No problems with it at all works great. Ran every possible scan. Used ASO, Revo uninstaller, EVERYTHING!!! No leftover files found. Still wont let me install Firefox. Keeps saying must reboot to finnish uninstall first.

If your friend "cleared his hard drive" by formatting/repartitioning and reinstalling Windows, there should be no trace of Firefox remaining. I'm guessing he did less than that but in any case, you could try one of the "clean reinstall" methods given here:
http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
If that doesn't help, what is the exact error message and window title you get after attempting to install Firefox?

How can I keep window tabs after reboot in Mavericks?

Upon each reboot I find I need to reconstruct all Finder window tabs. Is there a way to keep/restore Finder window tabs after a reboot in Mavericks?

hi
the problem is in the firefox tab strip at the bottom of the page. i have attached two screenshots . when i open more than 6 tabs, they all get compressed into 1 tab. i want all tabs to stay open individually, and the tab strip should therefore have a page scroller icon forming when many tabs open. i have had this in the earlier computer i had, but recently got a new one. now i cant figure how to set firefox to do what i need.
thanks

My mac pro with dual monitors keep switching sides after reboot

Hi all,
I am having a really weird issues with my Mac Pro after I installed Mountain Lion. I have dual ACD Monitors. Every time I reboot, the monitors switch sides. In other words, the monitor that is in front of me with the dock would switch to the other monitor and vice versa after I reboot. When I reboot again, it switches back again. This is extremely annoying. I have had to switch the inputs on the back of my computer every time.

I hate to burst my own bubble here, but I recently added a 3rd monitor, and now I'm getting the same inconsistent monitor switching between my second and third monitors.
Here's my set up:
Mac Pro, OSX 10.8.2
2x2.26 GHz Quad Core Intel Xeon
16 GB RAM
Three Dell ST2420L display monitors
What seems to be happening now is that I get three identical 'color' display profiles. The first one seems to stay on the same monitor, but the second and third monitors now switch at random. I can't seem to get them to stay in any particular order.
Any suggestions or new approaches for solving this would be greatly appreciated!

Why does my Ipad screen keep freezing even after rebooting

My ipad screen keeps freezing and remains stuck. So in the last hour this has happened 3 times after hard "reboots". Can someone explain whats going on? Uwas not downloading anything ..only looking at Facebook.

Hello, Nina1711.
Thank you for visiting Apple Support Communities.
Try closing all open applications in multitasking and power cycling the device. Test the responsiveness of the iPad after processing these steps. If the issue persists, check to make sure you have space available on the iPad in Settings/General/About. If there is no space available you may want to remove unwanted Apps or media as this can cause the unit to become unresponsive. If these steps have been processed with the issue persisting, you will need to restore the device. Make sure to backup the device prior to restoring.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Cheers,
Jason H.

JDK 6: Generics: List.add() question - keep getting unchecked call warning.

JDK 6
Generics
private TreeNode transactionTreeData;
transactionTreeData.getChildren().add(moduleData);1. transactionTreeData is a TreeNode.
2. the method getChildren() returns a java.util.List
3. the method add() is from the Collection interface.
I keep returning the warning message:
"unchecked call to add(E) as a member of the raw type java.util.List"
I understand what this means, but I am having problems rewriting these lines correctly to remove the warning.
I've tried:
private TreeNode transactionTreeData;
List<TreeNode> treeList = transactionTreeData.getChildren();
treeList.add(moduleData);But I keep returning the same warning message. I guess what is throwing me off is how to I properly add the generic statements when the List is return from a method (getChilden in this example)?
Thanks,
--Todd

This is actually JSF - MyFaces Tomahawk to be exact, my mistake for not adding that in my original thread.
I am dealing with the compiled class:
package org.apache.myfaces.custom.tree2;
public interface TreeNode extends java.io.Serializable {
     java.util.List getChildren();
}TreeNode.getChildren return a raw List as you can see, no doubt...
Thanks,
--Todd

Account Information Keeps Getting Lost After it is Saved

At my office computer we have an iTunes account that is to be used at our office as well as a couple places around the world. We have entered in all of our credit card and billing information and yet, after we sign out and sign back in, when we try to purchase a song and put in our login and password, we are taken to an account verification page that, even if we verify, does not allow us to purchase a song. We have reset iTunes and re-entered the credit card information fully. What could be the cause of this. The work computer I use does use Vista. Any thoughts are appreciated.

Delete the WAP from your list of preferred networks and also delete it from your keychain using Keychain Access. Then re-add. I had to do this for bith a WPA and a WPA2 access point. Funny thing is that after upgrading to 10.4.8 it took two days for the WPA account to start misbehaving and another 4 days till the WPA2 one started dropping. Deleting completely and re-adding them fixed it both times.

Microphone +20 Boost keeps gets unchecked after rebooting pc..

Similar Messages

Maybe you are looking for