Microphone and creative inspire p580?

is it possible to use a mic with creative inspire p580 speakers pn the k7n2-delta-l?

You need to install the S-bracket, which probably came with your board. If not you will need to buy one seperately. Then, 2 of your speaker jacks go into the S-bracket leaving you with the mic slot free. I have K7N2 Delta ILSR and the same speakers and this method is what i use.

Similar Messages

Asus A8N-E onboard Realtek AC97 and Creative Inspire P5800's

I am attempting to connect some creative inspire p5800 speakers to the realtek AC97 audio on my A8N-E. But when I run the connector sensing it senses the jack i have plugged into the lime/green socket as stereo line in. In the speaker configuration the lime/green socket is identified as Front speaker out. The jack at the other end of the lead is plugged into the correct socket on the subwoofer. The rear and center speakers work fine.Any ideas would be greatly appreciatedThanks

well there jason, since you asked, there are some of us who have the P7800 where there are four plugs on the side of the speakers and only three plugs on the computer side with asus mother board needing four. The only way around it is to disconnect the grey plug which is the bass and side speakers and bootleg to the bass which isn't how it is supposed to work.

Creative Inspire P580 volume control probs

Reading through some of the posts on these forums, it is quite apparent that there is a very obvious fault with certain Creative speaker systems. I've used my P580's for over a year now, and has been working fine, although I've now changed to the Logitech Z-5500's instead, but I want to use these for my PC in the living room, but the wired remote control is no longer working. Therefore, I can't operate the system. Before it gave up the ghost, the volume would keep on fluctuating, and even just tapping it would increase the volume tenfold. It's completely not working now, even though the speakers are fine. The documentation states that you can buy a separate volume control unit through the Creative shop, but I can't find it. Any help?

This sounds like a customer support issue rather than a forums one but I guess it is possible someone from Creative will respond here. Your better bet would be to submit your problem here and deal with the problem through Creative's Customer Support system. They may be able to ship you a new part for a charge or help you fix the problem.
How, exactly, is the volume control broken?

Spares for creative inspire p580 anyone know where I can get them?

Two bits were stolen from my system:?The volume control and the power unit. Any ideas. Thanks?

Hi,?anyone reading this I have managed to find it so here is the link If anyone gets stuck like me. (If it says already on your player just keep going it will replace and correct it)?http://sg.creative.com/support/downl...ype=4&x=24&y=6

Creative Inspire P580 stopped working.

Hi!
My P580 stopped working recently. The power supply is okay, but no sound at all. I can turn on/off the system with the remote controller, I've tried several inputs but no luck. The system is more than 2 years old and no warranty.
Thanks in advance.

DGBVIPER wrote:
It decided to download at 8kb/sec and would take about 6hrs, instead of 4minutes (my onnection,2meg,250kb/sec)
So, fine. I decided to do it overnight. Woke up, and decided to extract the file, after it got to 00% I got an error message "Cannot fininsh extracting, the file is corrupt."
Fantastic! I thought my problem was going to be sorted with a simple install, apparently not.
Is it even worth trying to download the file again?
Regards,
David.
Well I can tell you that the ISO are definitely in good working condition.....not sure why you have corrupted files......

Creative Inspire 5.1 Digital 5700

I want to buy the inspire 5700 but it is off the buy list. I li've in holland. I was watching it because it was not in stock. But after a while it was gone of the list. wenn is it getting back so i can buy it's

kk.. ill buy the decoder DDTS-100 and with 5.1 sound. what would you suggest?
Creative Inspire T5900
Het Creative Inspire P580
De Creative Inspire P5800
De SBS560-
with the decoder:
Creative Decoder DDTS-100
or buy the complete: Het Creative Inspire GD580
its for my dvd player and tv.
another question:
jermey can you give me a link of DTT-100 with the Inspire T-5400 speakers. i cant find them. i live in holland maby its that...
and another question:
i have another question my dvd players supports dolby digital. and now i want to buy one with dolbey digital EX does that work to and another question:
my dvd players supports 5.1 sound if i buy 7.1 sound with a decoder do i get 7.1 sound?
srry i aks so many questions i want to make sure i buy the best:smileyvery-happy:
Message Edited by hanspeter on 03-15-2005 03:19 PM

Creative Inspire T6100 5.1 Speakers and Creative Vision M 30 GB

hey i wonder if you could help me, i would like to get some Creative Inspire T600 5.1 Speakers
for my vision m but i have read some reviews that you need 3 audio inputs to get all the speakers working so there isn't much point in buying them unless any of you know if there is an adapter or speakers like this in the same price range which will work fully with my vision m. also would these speakers work off a tv?thanks very much
Message Edited by big7george on 05-3-2007 04:24 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Ceative Inspire 4.1 and Creative Blaster Sound card live 5.1 Problem

DCeati've Inspire 4. and Creative Blaster Sound card li've 5. Problem? hi
I have this card Creative Blaster Sound card li've 5.
for preview
http://support.creative.com/Products/Produ...ET=CategoryID:
And I have this this sound speaker 4. 4400
for preview
http://support.creative.com/Products/Produ...nspire+4.+4400
The problem that I can not find the sound card driver for windows 7 and the windows installed the driver but the sound is not pure although it's higher than the sound when i connect the speakers to my Built in card
I am not satisfied with the sound when i connect the speakers to creative li've card and i can not install the driver for windows 7
I hope to fix this
Thanks

Does this problem only occur in certain programs? Because I have a similar problem with my sound suddenly dropping without warning. But it only happens when I'm playing music in Windows Media Player. If it does have something to do with the media player then I suspect it could be the "WOW effects plugin." I hope this helps, or at least narrows down your problem.

Creative Inspire T7700 - Only frotn speakers and sub work?

I recently bought a new Dell Vostro 400 PC with a 7.1 surround sound soundcard. I decided to also buy the Creative Inspire T7700 surround sound system.
I have got it all set up, and when I run the sound demo on every individual speaker, they each sound on their own, however when playing games, listening to songs or watching movies, only the subwoofer and two front speakers make a sound.
Please can someone advise? Should I buy a creative sound card too?

Fri3ndly,
Most sounds that you will play within windows are stereo. This means that they are encoded with left and right signals only. Typically only DVD's and some games support 5.1 output. If you are getting a Creative sound card, you might want to consider the CMSS feature that will allow you to upmix stereo channels to virtual surround.

Creative Inspire P5800 5.1 Speakers Only the subwoofer and front 2 speakers work HELP!!

Hello,
I have got the "Creative Inspire P5800 5.1 Speakers." I have connected all the speakers to the subwoofer and plugged my Creative Zen Vision : M into the AUX socket on the back of the subwoofer using a jack to jack cable. When i play music only the subwoofer and the front right and left speakers work is there anything i can do to change this? (I have got no Computer involved)
Any help would be appreciated,
Chris.

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Creative inspire P7800 and X-fi extreme sound card on win 7

I have a dell with windows 7, the creative X-fi Extreme sound card and my creative inspire P7800. The sound has not worked properly since receiveing the computer.
I am going to assume it is my speaker and the set up.
I currently cannot even get the option to set up the 7.1 surround speakers. It only shows two. Half the time the sound doesn't work and the other half it only works on certain sites.
I would appreciate any advice on how to trouble shoot this and get it working properly.
The driver I have currently installed is the creative ver. 6.10.0.209 dated 8/27/2009.Above this there is also another listing that says ATI High Definition Audio Device. I do have the on board sound of my motherboard disabled.
If I need to install another driver please advise me of the procedure to do it correctly.
Thank you for any help!
Wanda

You may want to try downloading the card's latest driver from http://support.creative.com/Products...T=CategoryID:1
It is a new driver and is released on 28 March 2014.

Availability of Inspire P580 PSU in the US?

Hi,
I'll shortly be moving from the UK to the US, and I own a UK-bought Inspire P580 5.1 speaker set. Due to the voltage difference (220/240V vs 110/120V) I'd need a new, US-sourced 110V PSU in order to use the speakers in the US.
Is it possible to buy a compatible PSU from Creative Labs US? Are there any third-party PSUs I could use instead?
TA

If it's an external power supply. The answer is YES!

Help setting up Creative Inspire T6100 (5.1) to HP Laptop

Hi I recently bought Creative Inspire T600 (5.) speakers. I am unable to connect this to my HP DV6T laptop having only one input for speakers where as creative t600 has 3 pins in black, orange and green colors. I am stuck here. Could anyone please tell me how to connect the 5. speakers to my laptop? Appreciate your help.
Arun.K.S

Not really 100% sure (I only have a Creative T3030 2.1 that has a single 3.5mm jack) but from everything that I Googled, it looks like a stereo 3.5mm to RCA adapter and a Logitech 5.1 Game Console Adapter should work.
http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP/ref=pd_si m_e_5
http://www.amazon.com/Console-Adapter-Convert-Plugs-Single/dp/B0006U3ACY/ref=pd_ bxgy_e_img_b
But to be safe, it might be best to check with Creative and see what they recommend for connecting it to the iMac.
http://us.store.creative.com/Inspire-T6100/M/B000LIDLV6.htm
Dennis

Creative Inspire 5300 5.1 Problems - Only Two Speakers Work 100%

I recently purchased the Creative Inspire 5300 5.1 speaker system for my home computer, thinking that a low-end setup would work fine until I gathered the resources to trade them in for something better. Upon hooking them up though I find that they do not work as I was led to believe. The front two corner speakers and subwoofer work fine, just as they would if they were a 2.1 setup, however the center and back speakers make no noise. I know I have them hooked up correctly as I can go into my onboard soundcard?s setup program and test them individually, but in actually practice they do nothing. Not with games or movies that are supposedly 5.1 enabled.
I'm clueless as to what the problem may be. Is it that I need a Creative brand soundcard, that may Abit motherboard and it'ss built-in soundcard are unable to establish the proper frequencies or whatnot? Perhaps I do not have the appropriate surround sound drivers installed? Any help would be vastly appreciated.

DevNull7,
You may need to enable certain settings within your sound card to upmix the Stereo to 5.1. Check with your sound card support for further information. They should be able to assit you on this.
Jason

Connecting Creative Inspire 5.1 speakers to DVD player

Hi,
I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output.
If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ?
Please suggest the 5.1 speakers that would suit my requirement (no decoder / only amplifier) ..
Plz reply back to [email protected]
Thanks,Sambath

Creative offers many speaker systems that will fit your needs, without decoder.
You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

Microphone and creative inspire p580?

Similar Messages

Maybe you are looking for