Microphone and webcam not working on Yoga S1 after windows 10 update

I have to admit I never tried the webcam since I got my Yoga which had win 8.1 originally installed on it, but with the update to windows 10, I'm trying more things out. I did install the camera driver from http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga?c=1  but no luck.I dont even see any kind of camera in device manager. The camera app just says "something is wrong" amd closes. I tried Skype and it also could not detect a working webcam. After installing  windows 10, I did try Cortina and it had me go into microphone setup and it was working. However after subsequent updates, it no longer works. The micropphone levels are ll the way 100%, but when I try to setup the mic, I never see the level meters move when trying the speech test dictation,. Ive installed the Conexant drivers in the the above link, and also uninstalled them and tried to go back to what are the default microsoft drivers, neither seem to wor  

Hey 22d05da3,
Hey I see that you're having an issue with the webcam and microphone.
This could be a hardware issue knowing both of these features are in the same module
But first,
Can you go to device manager then go under the section that says imaging devices and tell me if the webcam shows up under there. Also, check and see if there's any type of exclamation mark next to it.
Next, Go to the sound controllers section also and let me know if you can see the microphone underneath that.
Now, these two don't have drivers to install from the website. What you can do is uninstall these drivers from the device manager then restart your Notebook. It should install the drivers after you restart.
Also, if this doesn't work you can do a driver recover from the software. Here is a document to show you how to do that.
http://goo.gl/XjqLp
Go down to the section that says "Reinstall the original webcam program that came with your computer".
If any other issues come up before this like you can't find the drivers in the device manager. Go to the section on that document that says " Webcam is not listed in the device manager ".
THX

Similar Messages

  • Microphone and Webcam not working/We​bcam not recognized by YouCam

    Hello,
          I have a dv7-6c95dx and my YouCam  program tells me that it does not recognize my integrated webcam. I have read all of the webcam forums on this site and clicked on all of the links people have posted in the forums. I have uninstalled the CyberLink YouCam program and it still comes up with the same messages. The webcam also does not show up in my device manager. The microphone is malfunction as well, it will not work any any programs including skype. 
         I have heard that the webcam can come unplugged internally, will that also cause the microphone to stop working? I have run out of options and I do not want to pay anyone to fix it. I would appreciate any advice on this subject. 

    Hi DillOrNoDill,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7-6c95dx Notebook and sound and microphone issues and Webcam not working correctly. I would be happy to assist if needed. Try these steps first.
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    You could also try Microsoft troubleshooter located on your Notebook.
    Here is a document on WebCam troubleshooting. The Webcam will be listed in your device manager under Imaging devices. You should be able to click the action button and scan for new hardware.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Internal microphone and Webcam not working

    Ive had my laptop for about 2years, i have a Toshiba Sattelite L840
    Ive used skype to call and webcam but for some reason for the past week i havent been able to use it. 
    I checked my drivers installed, the Audio Input and Output have disappeared and so has imaging devices. 
    If anyone could help would be much appreciated, There are no hidden devices under the recording sound tabs, my webcam still lights up but it does not show images.
    Ive also realised that my firewall is down, i click on the use recommended setting but it doesnt do anything
    Please contact me if you know anything about fixing these problems

    I don't actually have any information on that model because that wasn't sold here in the US. This is the Toshiba USA forum, and I believe that's from Toshiba Australia. You should contact them.
    - Peter

  • DV9910US Audio and webcam not working.

    Hello, I have worked for over a month on trying to restore a HP DV9910us. I even ordered the recovery CD from HP.  I can not get the audio working or the webcam working. I have done extensive research online and tried every solution I found. Any help will be appreciated. Thanks

    Hello robc1042.  I understand you're having some issues getting your audio and webcam to work.
    You said that you've tried numerous solutions.  Would you mind giving a quick list of the sorts of solutions you have tried?  This will be helpful as I wouldn't want to suggest solutions you've already attempted.  
    You may even want to take a look at this thread.  I posted this a little while back but it covers the solutions for a webcam not being detected.  You may find it helpful.  
    To begin I would like to see if either the webcam or sound card is listed in Device Manager.  Try the following.
    Click Start, type "Device Manager," and press Enter.
    Expand the "Imaging Devices," "Sound, video, and game controllers," and "Other Devices" sections.
    List what you see.
    I will await your reply.  I hope you have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Satellite C650-197 Built In Microphone and Jacks not working

    As the title, I tried to use the my microphone that comes inbuilt on this model (integrated VGA Web Camera with built-in microphone) and found its not working. Tried to plug in an external microphone via the mic jack and still not recording.
    I cant seem to find the drivers for the inbuilt or the jack anywhere.
    Any ideas?

    Hi
    > I cant seem to find the drivers for the inbuilt or the jack anywhere.
    Such drivers dont exist. The sound card driver controls everything.
    I think you should firstly start the webcam software and should test the mic because the internal mic is a part of the webcam.
    The webcam software provides an tab; settings and properties. In one of these tabs you would find settings for audio.
    There you could increase the mic volume and could record small audio session.
    Additionally I recommend checking the settings in control panel -> sound.
    Be sure that mic volume is set to max. Don't forget to check hidden and disabled devices there...

  • USB devices and Webcam not working or installing on Pavilion Laptop

    Hi there,
    I have a HP Pavilion Dm3 1030 sa,
    For a while now certain USB devices have just not worked on the laptop, specifically printers and mice, despite me reinstalling the drivers for those devices on the laptop. I tried the devices on other computers and they worked fine.
    This was annoying but I put up with it.
    Now the webcam and microphone have stopped working and are no longer recognised by the computer. I have reinstalled the webcam software but cannot find the drivers for it. The software (arc soft webcam) says the inbuilt webcam is not connected.
    I have been able to get my iphone to connect via usb and usb drives work most of the time. I don't really know what is going on. When I look at devices that don't work in device manager It says that there is a USB I/O error. I have tried reinstalling the drivers using device manager but that didn't work either. Any advice would be appreciated. Not being able to use a mouse is annoying as track pads are slow.
    Pn vj409ea#ABU
    Is my notebook in the warranty period? No (three months out)
    Is the originally installed OS still installed (Yes)
    Have I changed the partitions (NO)
    Thanks for any help
    Kieran Latham

    run an extended _*Apple Hardware Test*_.
    JGG

  • Dv7-6059eo, microphone and camera not working, have re-installed the system, updated drivers etc.

    Hello. A couple of days ago, my microphone and camera suddenly stopped working. When I started up my camera in Skype, it said "Please open YouCam" or something like that, and when I did, it told me to update it. So I did. Then it told me that I had to uninstall the current version of YouCam. When I did and tried to install the update, it said something like "no video device detected".
    After updating drivers and un-/installing things, I recovered my whole computer to fabric options. Still not working. So I suspect that it might have something to do with the hardware. Although I don't know what should have caused it, as it just happened randomly in the middle of the day.

    Brad K59 wrote:... Photo Booth cannot recognize my built in Mac camera (ISight)...
    iSight camera failure after OS X 10.9 Mavericks update
    Brad K59 wrote:... I am missing the com.apple.photobooth.plist file ... how do I rebuild the file? ...
    Try the User Tip suggestions first.  Your system does need a plist, but a properly working OS X automatically generates any needed plist files when you launch the associated app (if its plist does not already exist.)

  • TX2000 USB Ports, Digitizer and Webcam not working (several people have save problem)

    OK folks this is an old problem that was posted on the old TX/TM board:
    http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply/tx2000-usb-ports-digitizer-webcam-all-not-...
    Several of us have had these ports/hardware fail. 
    ****IT IS NOT A BLACK SCREEN FAILURE******
    In my case, the motherboard has very low hours after replacement, full system reinstall, all drivers up to date.  If you take the time to read all three pages, you will see that many of us have tried everything that anyone suggested.  Most of us still believe that this is a software issue as opposed to a hardware issue.
    Not much hope for a soulution, but thought I would try this board since the TX/TM board is now reply only and probably has a very low visit rate.
    Jim

    I also am not able to use the pen and touch features after doing a recovery manager to factory spec, everything else is good but like the others when trying to open Tablet Properties it gives the message a supported  tablet was not found on the system, also after updating the digitizer from hp the version does not change it's still 6.1.6002.18005 when it's supposed to be 5.05-5_HP5 Rev.A.
    I've unblocked the download in properties ran it as administrator,uninstalled the old driver, my USB works my Quick launch buttons work, the screen rotates, the bios is updated. ran HP Update it finds two updates -a HP update software utility and a critical update HP Photosmart and then nothing else when there are many many more at the software and driver page for the TX2000
    Is HP being silent due to the class action lawsuit? Was that a perk that hp got for settling, that they no longer have to address any issue with this Tx2000 series?
    As so many have wrote before...... NEVER AGAIN HP!

  • USB Microphone and Vista not working

    I've installed the Captivate 4.0 trial everything is fine, but it's not recgonizing my logitec headset with microphone and the Vista operating system. I did a search and some peoplre recommend going to this site
    https://share.acrobat.com/adc/document.do?docid=a14e1bd9-dc10-4456-9cd2-44489809b78e
    However, I can't download this file from here it either say it doesn't existing try to get to register with Acrobat.com which I don't want
    Were else can I get this file to fix this problem

    Hi there
    Have you tried what is oulined at the link below?
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Screen sharing not working with eMac lab after 3.2 update

    Screen sharing no longer functions after applying the 3.2 update in our eMac labs running 10.4.10 and PPC processors. However, it still functions in our iMac labs running 10.4.10 Intel processors. Before update, I was able to screen share with all the computers in the lab. After the update, I am only able to share with one single computer at a time. Not very useful anymore for teachers to use for demonstrating purposes at our school. It definately had something to do with the update since it was working moments before the update. Please help before I have to call Apple regarding this issue. Again, it only seems to affect screen sharing across PPC eMac computers, not Intel based computers.

    Through much testing at our schools, we determined that the problem lies with the update and the admin machine running ARD. If the admin machine is less than a G5 (doesn't matter if it is intel or PPC), ARD will not screen share with multiple computers (more than 3 machines) at a time. If you have a G5 admin machine, you probably will not experience this problem. Apple has yet to contact our district regarding any options for fixing the problem. We are currently in the process of shuffling computers to make sure there is a G5 admin machine in every lab to run ARD. However, I still think Apple needs to recognize this as a problem with their update. Screen sharing is a great tool for teaching class and it is too bad that with the current 3.2 update, it breaks the ability to use it with "older" G4 macs. Hence, that is why your eMac screen sharing is not working anymore. I can only hope for a prompt update to ARD to remedy this situation.

  • HT1338 my speakers are not working on my macpro after mountain lion update.

    I need my speakers to work and its not functioning any more please help.

    Your spearkers may have a problem or your your connection to your computer may be very weak

  • Microphone and Audio not working on Windows 7 (x64)

    Hi.
    I uninstalled Windows 8 two days ago, trying to put again, on my bootcamp partition, Windows 7. The first time I tried the GPU just wouldn't work, so I installed everything AGAIN to make it work fine. I downloaded those "iMac Late 2009 for Windows 7 Drivers" from apple.com and it was pretty successful: GPU was working again and so did my native resolution, 2560x1440 (I have a 27" Late 2009 iMac with i3). When I tried to talk to one of my friends on Skype I found out the (internal) microphone wasn't working, and so did the audio (also internal). So I installed EVERY drivers I could (realtek, cirrus, bootcamp 3.0, 3.1 and 3.2, I took some drivers from Driver Genius). I don't really know what I have to do!
    Please help me, I'm in a tremendous situation.
    ( sorry for the bad english, I'm italian.)

    Che dice Windows nella finestra dei dispositivi audio? Per me l'errore (su Windows 8) era che diceva "no audio devices are installed". In quel caso bisogna fare right-click nello spazio di quella finestra e selezionare "show disabled devices" e "show disconnected devices". Quando ho fatto quello sono riapparsi sia il microfono sia i parlanti. Spero che ti abbia aiutato in qualche modo.
    (Mi dispiace per il brutto Italiano, sono Australiano)

  • No audo, usb not working, memory card not working and webcam not working

    my audio, usb ports, webcam, and memory card reader stopped working all of a sudden about 3-4 weeks ago i tired restoring it to factory settings nothing helped. need my laptop to work for school i need to use all these device for a class i am taking!
    these are specs for the laptop
    »HP G62t-350 CTO Notebook PC
    Serial Number:   {Removed for privacy}
    Product Number:   wv689av
     have a 64 bit

    Hi:
    The touchpad driver from your notebook's support and driver page is sp69626...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-145252-1&cc=us&dlc=en&lc=en...
    The PCI Device (card reader) needs this driver...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en...
    Download and install the amd chipset drivers and reboot for the usb 3...
    http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

  • IPhone 3G does not work with car integration after 2.2 update

    I just upgraded my iPhone 3G with the new 2.2 software update and now it doesn't work with my car integration. Very frustrating... I have a 2009 Honda Civic that has a USB interface. Before the update I was able to charge and play music through the USB interface. In addition, I could also control the music through the stereo. After the update, it says not compatible and it doesn't even charge the phone anymore. Doesn't anyone have the same problem or know how to fix it? Street view is cool but i will definitely revert back to 2.1 if I can't fix this...

    I am having the same problem here After updating to 2.2 the iPhone has stopped working in the car. The stereo just simply refuses to see it. The car in question is a brand new 2009 VW Polo Match, which I know is not as fault as tried it with a iPod nano and worked fine.
    Is reinstalling the firmware only solution to this? Do we know the cause yet?

  • Adobe flash is not working for internet explorer after 10.1 update?

    Ive been having this problem for a month or 2 now. My computer wanted me to update adobe flash and i did but if i go onto sites like youtube i cant get the program to work. ive checked to make sure the program installed which it had but its like its inactive or an empty shell. I have internet explorer and i have Macafee. the installation worked on my laptop but not our stationed computer or my friends' computers. What is going on???

    Under Add-ons, do you see Shockwave Flash object, and is it enabled?

Maybe you are looking for