Microphone built into Compaq Monitor Not Working

Hey guys, I have a microphone built into my old Compaq monitor which I use with my Mini. The monitor is plugged in and the Microphone is plugged in through the Line In, but it doesn't seem to be recognized. It does not work in Mac OSX or Windows. Any ideas? Please help ASAP.

It's probable that the microphone simply doesn't generate the necessary voltage to match the mini's audio input. The mini's audio in is 'line level' meaning that for a mic to work it has to be of an amplified variety.
You might try a device such as the Griffin iMic, which would allow lower-level devices to work with the mini. (http://www.griffintechnology.com/products/imic/)

Similar Messages

  • HT1338 My built in microphone is not working and my built in camera is not working.What do I do to activate these?

    My built in camera is not working therefore, my photo booth and factime is not working. Now my built in microphone is not working. I can't find any way to troubleshoot these problems.

    your phone is still under warranty.  Bring it to Apple for evaluation.

  • Macbook Pro 17" - My built in speakers are not working.

    Macbook Pro 17"
    My built in speakers are not working.
    The speaker logo is not highlighted (grey not Black) and when in sound options  "output" pane only displays the digital out for 'optical' - ie, the internal speakers dont register (headphone socket works)
    Any ideas?

    1. If red light is visible in the headphone port, plug the headphone into and out of the port 5 or 6 times
         to flip the microswitch inside the port. Hopefully that will make the mode revert back to analog from digital.
    2. Reset PRAM. http://support.apple.com/kb/PH4405
    3. Reset SMC.   http://support.apple.com/kb/HT3964
         Choose the appropriate method.
    Hope any one of these steps helps.

  • My built in camera is not working after upgrading to a new Skype version

    my built in camera is not working after upgrading to a new Skype version

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • Help! Built in features/hints not working flash cs6. Need fix ASAP

    Loads of built in features are not working for me in Flash CS6. When I was using CS4 they did, now they aren't. I will give two examples. Say for example I am writing code in the actions window and I type "green_btn." in regards to the name of a button instance, what usually happens when I hit the "." immediately after "green_btn" a menu will pop up showing me every option I can pick, like green_btn.addEventListener() etc etc. There is usually a menu that comes up, but for me there is no menu. I have also created a button symbol, placed an instance of it on the stage, named the instance and tried it again (cs6 is supposed to recognize the "_btn" automatically and make the menu come up even if there is no button created, but I decided to create one just in case), and no menu pops up, still . Something is wrong here, it used to work for me when I had CS4 installed. Another example is if I am in the actions window again, and I type in a function like trace(); for example, you are supposed to be able to put your cursor infront of it, or highlight it and hit F1 and it will take you directly to the help page for that function. This does not happen as well. As I go on and on I seem to keep stumbling across all these built in features for convenience that are not working. And I know 100% that they are supposed to be, I am actually in a class right now for flash and I watch demo videos where it works perfectly. What is going on with mine? I have checked every possible preference and option, I have everything and I mean EVERYTHING up to date with the most current versions. I'm stuck, and I am getting really pissed off to be blunt, I need to fix this ASAP because it is going to affect my studies which are currently ongoing, I have deadlines to  meet and I am dicking around trying to fix this. PLEASE PLEASE HELP ME! Any suggestions and solution will be greatly appreciated on my behalf. If anyone helps me fix this I'll kiss you!!!!!!!!

    I increased the cache from 800 to 5000, is that sufficient?
    The .fla is saved to my harddrive
    still no code hinting. I also unchecked and rechecked the code hinting, and even did a reboot on my comp and still nothing.
    everything is updated, EVERYTHING, to the most current version available. I updated everything possible through the "Adobe Help Manager" and also through the help menu within the programs themselves; Help->Updates. I made slight progress with the help issue, in general settings withing the "Adobe Help Manager" I changed it to display local help only. So now when I initiate help by either right clicking, and then going to "view help" in the pop-up menu, or by hitting "FN+F1" (hp laptop) it brings up the flash_reference.pdf but it does not go directly to the function selected as it's supposed to. So maybe that isn't even progress...
    I watched the demo video for the course I am in, and it shows our instructor put the cursor immediately infront of trace(); (within the actions window) and go to help and it goes directly to the help section on trace, and then he also highlights trace(); and goes to view help and it does the same thing.
    I am also in touch with him (its an online course) to see if he can figure out it, and I am still waiting to hear back from him, but no one seems to know. I even contacted ADOBE today and got passed on to 3 different people only to be given the toll free 800 number because no one knows how to fix it.

  • SELECT INTO ( variable ) STATEMENTS NOT WORKING FOR SYBASE TABLE AS VIEW

    Dear Experts,
    We have connected our 9i db with Sybase db using Hs connectivity.
    and then we have create the view in oracle db for SYBASE_TABLE as SYBASE_TABLE_VIEW.
    ALL THE INSERT, UPDATE AND DELETE COMMANDS ARE WORKING BUT THE
    select Into (variable) is not working.
    Please help to resolve the select into statment which is in BOLD in the below routine
    PLEASE NOTE! FORM WAS COMPILED SUCCESSFULLY AND FORM IS RUNNING BUT SELECT INTO COMMAND IS NOT WORKING.
    Thanks & Regards
    Eidy
    PROCEDURE SRBL_INSERT IS
    CURSOR SRBL IS
         SELECT impno,impcod,impnam
         from oracle_table1 a, oracle_table2 b
         WHERE a.impcod=b.empcod
         v_srpcod varchar2(5);
    BEGIN     
    FOR rec in SRBL loop     
         begin
    select "im_code" into v_impcod                    
         from SYBASE_TABLE_VIEW
         where "im_code"=rec.impcod;
    exception when no_data_found then
         v_srpcod:=null;
    end;
    END LOOP;
    END;
    Edited by: Eidy on Aug 16, 2010 11:28 AM

    hellow
    try this.
    select "im_code" into v_impcod
    from SYBASE_TABLE_VIEW
    where "im_code"=rec.impcod;
    v_srpcod := v_impcod ;
    ........

  • Satellite M645-S4050: built in camera does not work correctly

    My built in camera does not work correctly.
    It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
    Also some videos I load up on youtube look like this.
    I have been researching for an answer but can't find it, please help me.

    All you can do is to test it with latest webcam driver.
    Remove preinstalled camera software and install latest version offered on Toshiba download page.
    If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
    In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

  • Ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

    ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference

    Hi, JoJoEvs.
    Thank you for visiting Apple Support Communities. 
    Here is an article that you may find helpful when experiencing this issue.  After all steps related to your sound issue have been processed, see the section labeled Issue not resolved. 
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Jason H

  • Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

    microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

    Try this:
    1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
    2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
    3. If the issue persists, Your iPhone need repair.

  • I have a HP dv6000 laptop, I recently upgraded to Win 7. The microphone of my laptop is not working.

    Hello,
    I have a hp dv6000 notebook, the microphone of my laptop is not working since I upgraded to win 7.

    Did you make sure whether the device to which you are trying to connect is discoverable?
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • The microphone of my iphone is not working on call but when i use viber it is working

    The microphone of my iphone is not working on calls but when i use viber it is working

    Hello there, qasmicomputers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Built-in microphone on HP Pavilion DV6500 not working in Windows 8

    Hello, 
    I would like to know why my built-in microphone does not work after I installed Windows 8 Pro 32-bit on my HP.
    Please note that before on Windows 7 the microphone did worked. 
    Service tag dv6551ea
    p/n: GJ013EA#B1A 
    Windows 8 Pro 32-bit
    Thank you!

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g4-2020tx Notebook and Bluetooth not working. Here are some links that might help.  I would check to make sure Bluetooth is on. It shows you how to do that under Connecting Bluetooth. A device such as computer might need to have the Discovery setting turned on. To turn on Discovery in Windows 8, from the Start screen, type Change Bluetooth to open the Search charm, and then select Change Bluetooth settings from the search results.  Hope this helps. Thanks.

  • MEGA PC 651 - VGA monitor not working ?

    Hi, please help!
    I recently recieved a MEGA PC 861 but can't get the VGA monitor to work.
    When I plug the monitor into the VGA port and boot up I get a 'no signal' message on the monitor.
    However, If I plug the monitor into the port on the graphics card I can see the boot up screen and access 'set up' for the BIOS and CMOS. If I let the PC boot up fully the monitor gets a signal right up until Windows XP has booted and then it vanishes. Once the Windows fanfare plays when I would expect to see the standard windows screen the monitor switches off and loses signal. I can switch it back on again manually, but get the 'no signal' message as before.
    Any help would be appreciated as we really want to play with our new toy !
    Thanks
    Heidi

    Similar to the problem heieup was having.
    I recently built a system using the Mega 180.  Although when I turn on the system, a boot screen will not even appear.  The monitor simply does not recieve a signal (and I'm certain its not the monitor because the monitor has been tested and worked fine on other computers and other monitors have the same response on the system - no signal).  Just like heieup, I've tried both Primary and Secondary VGA onboard video ports, both having the same affect.  A lot of what has been posted on the board I can't test because I have'nt even had the opportunity to install the WinXP yet.  I just built it about 2 weeks ago, and still trying to figure out what is causing this.  Any possible solutions/suggestions would be greatly appreciated.

  • Internal microphone in MacBook Pro 15" not working after upgrade to Yosemite

    Hello
    This issue is similar to iMac's problem with the internal microphone not working in FaceTime. In sound preferences, I have the internal microphone set for input. In FacetTme, I have Video->Microphone->Internal Microphone selected. There is no corresponding menu item for Audio (perhaps this is the problem? ). When I make a Facetime video call, I can hear the recipient, but they cannot hear me.
    When I go into the Sound setting->Input, select Internal Microphone and test it (like record something from Photo Booth), the bars (input level) remain greyed-out.
    MacBook Pro (15-inch, Mid 2010)
    Processor 2.8 GHz Intel Core i7
    Memory 8 GB 1067 MHz DDR3
    HELP!

    Hello
    This issue is similar to iMac's problem with the internal microphone not working in FaceTime. In sound preferences, I have the internal microphone set for input. In FacetTme, I have Video->Microphone->Internal Microphone selected. There is no corresponding menu item for Audio (perhaps this is the problem? ). When I make a Facetime video call, I can hear the recipient, but they cannot hear me.
    When I go into the Sound setting->Input, select Internal Microphone and test it (like record something from Photo Booth), the bars (input level) remain greyed-out.
    MacBook Pro (15-inch, Mid 2010)
    Processor 2.8 GHz Intel Core i7
    Memory 8 GB 1067 MHz DDR3
    HELP!

  • Built in isight camera not working with flash

    My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

    zeppelinfan1234 wrote:
    I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
    Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
    For your symptoms with this system, I suggest you do the following:
    (1) Apply the 10.5.8 Combo Update using the following process:
      • Backup your Mac and turn off Time Machine
      • Disconnect peripherals and restart Mac
      • Use Disk Utility to repair permissions
      • Download and install
       http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
      • Repair permissions again immediately following the restart that finishes the update.
      • Test whether Flash works for you now.
     (• Turn Time Machine on later when you are satisfied that the update worked.)
    (2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
      http://get.adobe.com/flashplayer/otherversions/
    Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Maybe you are looking for