Microphone dos'nt work in phone mode

Hi,
from one day to another, the microphne my iphone does not work in phone mode. It works by recording mode (Dictaphone).
I have version 6.1.3
Do you have any idea?
Thank you in advance

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W.

Similar Messages

My microphone won't work when in Speaker mode, but will when in regular mode. What is up with that?

My iPhone's microphone will not work in the Speaker mode, but will when in Regular mode. The microphone works even when in bluetooth mode. This was sudden and no updates have been made recently, but it is up to date with the software.

I took it to the apple store and it was determined to be a mechanical problem. Since I had apple care, they replaced the phone.

Bought iphone4 and the microphone does not work only if we use in speak mode. How is it possible to fix

I bought two iphone4 in Miami and one of them appared a problem that the microphone does not work in normal call only if i use the speak mode. I am living in Manaus - Amazonas - Brazil and we do not have an apple store to complain it.
Question.
How is it possible to fix this problem ?
Maria Filomena Kimura

Unfortunately, the warranty is NOT international. You will have to send the defective phone to someone in the U.S. and ask them to take it into the Apple Store for replacement, then have them ship it back to you. Apple will not accept the International shipment, nor will they ship a replacement phone out of the country where it has warranty coverage.
There are 4 carriers in Brazil who sell the iPhone, including one which sells it completely unlocked. You probably would have been better off to purchase them there if that's where you live.

I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
How to back up your data and set up as a new device
If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
iPhone - Contact Support - Apple Support

When im on a call i need to be on speaker phone to be heard Why dosnt it work without the speaker phone mode ?

When Im on a call I have to be on speaker phone mode to be heard. Why dosnt it work in the normal phone mode ?

Basic troubleshooting steps outlined in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

same thing happened to my S5. We're beyond frustrated.

CAN PHOTOSMART 5510 WORK IN BOTH MODES-USB AND WIRELESS TO PRINT FROM I-PAD OR I-PHONE 4S.

CAN PHOTOSMART 5510 WORK IN BOTH MODES-USB AND WIRELESS TO PRINT FROM I-PAD OR I-PHONE 4S.

SEPPLES86,
In order to print from your I-Pad or I-Phone you would need to be connected through wireless. Air Print works when your printer and device ( ipad or iphone) is connected to the same WI-FI network.
Here is a link to a post with a lot of good information concerning Air Print.
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/AirPrint-how-to-use-Apple-s-AirPrint-solution-...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Built-in microphone only works when phone is connected to iPod nano cable

Hi, I got an iPhone yesterday but the microphone doesn't work properly. I have figured out that the built-in microphone will only work when I connect the dock cable from a second generation iPod nano. The cable that comes with the iPhone does not work. The supplied handsfree earbuds work correctly at all times.
The strangest part of the problem is that the iPod dock cable doesn't have to be connected to my computer!
I'll state the problem again. Let's say I make a phone call. The person on the other end cannot hear anything I say, but I can hear them. Then I plug in the dock cable from a second generation iPod nano, and the other person can then hear me. Unplug the cable and they can not hear me.
I have tried restoring the iPhone three times, turned it on and off, and inserted and removed the headphone plug many times. These actions do nothing. *The only way I can talk on my phone is if I insert the dock connector from my old iPod!*

Take it back.....

Phone microphone has ceased working. Callers can't here me. Ideas?

After a year of working flawlessly, the phone microphone has ceased working. Though I can hear callers, they cannot hear me. Problem came on gradually in the last week or so. It was first reported as sounding like I was in a tunnel and under water, and now no sound at all

Did you try this, copied from iPhone: Sound muffled or low from the speaker or when speaking into the mic, http://support.apple.com/kb/TS1631
If you are using a third-party iPhone case, make sure it is not covering the speaker, microphone, or top microphone. Try making some calls without the case to see if a caller can now hear you more clearly or play music to see if the speaker's volume is better.
If you have not removed the plastic display film used for protection during shipment, either ensure that the microphone and speaker are not covered or remove the film completely.
Check that the speaker, microphone mesh covers, and top microphone hole are not clogged with lint or other debris.
If the speaker, microphone mesh, or top microphone (iPhone 4 only) appear clogged, please use a clean, small, dry, soft-bristled brush to clean them. To do this follow these instructions:
Use the brush to carefully and gently brush the speaker and microphone mesh.
Brush away from the 30-pin dock connector to avoid getting any debris into the dock connector.

Microphone doesn't work on speaker, or during calls.

AT&T, OS 6, Iphone 4.
Microphoen doesn't work in phone calls, or speaker phone mode. Interestingly, it doesn't work either in my call when connected via blue tooth, where the microphone is actually part of the car's bluetooth system. Furthermore, the microphone works in Apps like Voice Memo Recorder, and Dragon Dictation.have a fix?
Has anyone experienced this? I have not "restored" the phone, yet as I am unsure of what I might lose and need to backup before doing so.
Thanks, in advance for your help!

Good point Tik on my Razr I had similar issues and I cured the issue by simply power cycling and as soon as my Razr came back on and settled I power cycled it again that what helped my little guy.. and make sure to check all your sound settings b33

IPhone 4 Microphone not not working on voice calls but voice memos, viber, skype & facetime work just fine!! Any suggestions?

Hi Everyone,
I have encountered the following problem which I think a lot of other fellow iPhone users are also encountering however mine seems to be fairly pecuilar.
Here's the issue;
When making or receiving voice calls via my network operator's service, no one can hear me, i.e my audio input. I can hear the person on the other end of the phone fine but they can't hear me whatsoever.
However when I use the likes of viber, skype and facetime, my audio input is perferctly fine and the person on the other end of can hear me.
Note both viber and skype calls work just fine and 2 way communication is audbile regardless if I have a 3G or Wifi connection. Plus I have full singal bar strength when near a mobile tower so that elimantes antenna issues.
Also have taken alternative turns to cover both the top mic and the bottom mic during a viber or skype call and my audio input can still be heard.
I've done a reset, a hard reset of the phone and a reset of the network settings, still to no avail.
Have updated iOS to the latest version 5.1.1
Any suggestions would be much appreciated?
Thanks

I have the exact same problem, I have already restored the phone and it didn't work. The microphone works with facetime, skype and the voice memos. What just doesn't make sense is that when I use my earphone's microphone when calling, it doesn't work either. If it was a hardware problem the earphone's microphone would have worked I suppose.
This is the second iPhone 4 I have. The first one shut off after 9 months so I got a replacement phone. The replacement phone lasted 10 months when the microphone stopped working. I went to the apple store and they just couldn't give me a solution. They understood my situation and told me that it was very weird but all they could offer me was that I had to pay for a replacement. This is absolutely unjust, why do we costumers have to pay for the companies mistakes.

My microphone does not work on calls on my iPhone 4

Don't ask me what has happened and I have been through all of the troubleshooting that I can on my own.
I have no clue how to get a hold of a LIVE AT&T person or APPLE person.
The problem is my microphone does not work when I use the telephone, whether I make the call or someone calls me. It is NOT the MUTE button. And yes, I have already rebooted my iPhone about 5 times now. Has not fixed it either.
But the microphone DOES work as I was able to record a new voicemail greeting to let people know my phone isn't working.
So, they could call me all day long but they won't hear me, so who do I call using my landline (thankfully I kept it).
It is the day after Thanksgiving and I would be a fool to head over to the Apple Store or the AT&T Store....
Thank-you,
Marcia

Try disconnecting the headphones and then adjusting the volume, does it say headphones?
There might be something in the headphone jack, maybe lint, dirt, or something else in there.
Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers

Pizza guy in Jabber 10.5 phone mode

I'm moving away from CIPC in favor of Jabber phone mode.
Now that hunt group login/logout and call pickup works, all I'm missing is a form of speed dial.
Ideally I'd like to add pizza guys with phone numbers as speed dial. I know that there's no presence server involved, but if you can add custom tabs locally surely you should be able to add contacts as well.
Is this supported or in the road map?
Thanks!

You can add custom contacts, by just going to the options button and then File>New>Custom Contact. It's been available in earlier releases.

Jabber for Window, phone mode, how to disable "use my computer for calls"

We have a Citrix environment and only want to control the Cisco deskphone with Jabber for Windows in the phone mode.
We use CUCM 8.6.2 and I have installed Jabber for Windows 9.7.0 and all works fine, I can control my deskphone, make and receive calls, phonebook and Outlook integration works fine.
Is it possible to disable "use my computer for calls" as we do not want users to make calls via Citrix, but only use the deskphone for this.
Thanks, Perry

Hi Matthias,
Soft-phone mode cannot be disabled. Supported Features on Virtual Environment are the following.
Supported Features
    Instant messaging and presence with other Cisco Jabber clients
    Desk phone control
    Voicemail
    Presence integration with Microsoft Outlook 2007, 2010 and 2013
We have an existing defect which is in Terminated state because feature is not supported hence cannot be fixed.
CSCub40605 - J4W - Ability to disable softphone mode in Citrix environment.
HTH,
Please rate if you find this post helpful.
Regards,
Mohammed Noor

CUPC 8.6 logs out in softphone mode / works in deskphone mode

Hi everyone,
I'm experience an unusal problem with a virtual lab deployment I'm mocking up. I have CUCM, CUC, and CUPS versions 8.6 all running on ESXi 4.1. I have one Windows Server 2003 desktop with CIPC running and everything works fine. When I launch the CUPC client, it works when running in desktop mode, however, as soon as I uncheck the button at the bottom of CUPC to switch it to softphone mode, it "silently" crashes or logs me out.
My initial guess it that it may be an issue with the virtual sound driver (virtual audio cable) I'm using in order to get CIPC to install and work. Because it's for a mock lab I don't actually need sound, just the functionality. However, CIPC works fine so I'm not 100% sure how I can check if the virtual audio driver is causing CUPC to log out. I only assume that because when it has to change from desk phone mode to soft phone mode it's going to use the audio drivers installed on the local pc.
Is there any where I can check a log file to see if this is the case? Or, is there a better solution to installing both CIPC and CUPC in a virtual enviornment?
Thanks!

I'm running 8.6 on everything. And yes I setup a CSF device in CUCM not a UCP device like previous versions. It works now and I know I've used it before on W2k3 server but not virtualzed (not exactly sure why it would be different). Well, technically I used 8.0 on W2k3 and not 8.6 so there's probably some other underlying differences there as well.

Microphone dos'nt work in phone mode

Similar Messages

Maybe you are looking for