Microphone for voice over.

My standalone isight that I have used for voice overs has finally given up. (I'd developed a technique whereby I held the lens to my chin and pointed the isight down at about 45 degrees-but I digress) can anyone recommend a reasonable alternative, around $100 would be reasonable, I'm no pro but it has to be a reasonable quality.
I've bought and tried a microphone a day now for about a week and none match up to my experience with my old isight. I'd prefer one that needs to be close to the source sound so as background noise is not a huge problem and I'd also prefer it to be USB or firewire, I need to take on the guise of a ferret to get to the back of my mac.

I tried the logitech one from the  store, it didn't have the same quality as the isight but I could have lived with that I suppose as it wasn't as bad as some of the others I've tried. I don't know whether I got a faulty one, I don't think I did, because it seemed to work with Quicktime excepting the quality issue, but when I used it with FCE, it was awful.
Not sure if FCE has its own background noise cancelling feature that interfered with the background noise cancelling feature of the logitech but it was way to quiet 90% of the time and when it wasn't it was too loud, there was no middle ground. Overall too quiet, with odd words that were obviously said a little louder being clipped.

Similar Messages

Satellite A200-27R Integrated microphone for Voice over IP

The product description (see excerpt below) for a Satellite A200-27R states that the A200-27R has an Integrated microphone for Voice over IP. I have not been able to access this(e.g. with Skype, Live Messenger, Control Panel) nor is there any sign of it externally on the computer. The Control Panel > Sound > Recording tab says Microphone Realtek High Definition Audio not plugged in.
How do I set up and use the Integrated microphone for voice over IP?
Special features Enhanced Intel® SpeedStep® Technology
SM BIOS compliant
HD Audio support
Microsoft® Windows® HotStart? for instant-on entertainment
Multimedia Bar with 6 Easy Keys (Internet Browser, CD/DVD launcher, Play/Pause, Stop, Rewind, Forward)
integrated microphone for Voice over IP

Hi
The built-in microphone depends on the webcam.
As far as I know the Satellite A200-27R PSAE3E was not equipped with internal webcam and therefore the internal mic is not available.
Try to use an external headset with mic or only the single mic.
Regards

Recommended microphones for Voice Over use

I have tried plugging in my Sony wireless microphone, and also a shotgun mic into the line in port, but with no success. The mics aren't being recognised by Final Cut.
Can anyone advise me what I am doing wrong, or recommend a different microphone that I should be using?
Thanks
Stephen (Salisbury, UK)
G5 Quad Mac OS X (10.4.5) 4.5GB of Ram Quadro FX 4500 graphics card

There are a number of places to check to ensure the system is accepting audio from the Line In port.
1. In the Voice Over tool, look in the middle of the window and SOURCE to Built-in Audio and set INPUT to Line In.
2. In: the Blue Apple on the menu bar>System Preferences>Audio - make sure you have set the imput to Line In
3. In Utilities> Audio Midi Setup>Audio Devices - make sure you have the Default Imput set for the line in port on your mac.
It has been noted by many people that the files brought in this way (through VO) often need serious gain added (aka - they are very quiet and the volume needs to be increased). A mic pre-amp is a good idea. Otherwise, you can either bump the gain in FCP or use an external audio app (i use peak) to bring it up to desired levels.
good luck,
x

What microphone for voice over?

I am having a wonderful time with iMovie. I think I have figured out how to upload to YouTube, but it requires that I use Quick Time to do so. I would much prefer to upload directly from iMovie, but I think that may take a while to master. What I am trying to do with the movie that I have uploaded to YouTube is to do a voice over the sound track that was recorded when I did the clip. I would like to provide a description of what is being seen. I have tried two microphones that I know are good microphones, but they do not work with iMovie. The mics are Labtec AM22 microphones with 600 ohms impedance. Is there a specific microphone I need to use to do the voiceover in the iMovie program?
Thank you.

Just to let you know, I have purchased the Blue "Snowball" usb mic, and it has solved my problems. Not inexpensively, but it works great!

Use of inline external mike for voice overs

Hand held microphones have insufficient volume for voice overs. Was told to buy the iMic. It does not help. Would a condenser mike, or a mixer give me amplification? The built in mike does not pick up female voices, etc.

The iMic should work OK ..it's essentially a USB input amplifier to let you plug in other audio input devices, such as any variety of mics.
Another mic on its own would not normally have sufficient power to give reasonable audio into your Mac, and a mixer would not be as efficient as an iMic (..or other USB input device). A condenser would generally be way too underpowered without an 'iMic' to boost it.
The early iVoice - similar to an iMic - didn't properly separate its own mic's audio from any other audio coming in through its little 3.5mm input socket, so I opened up mine and snipped the wire which connects them, so that it would use only its external mic socket ..and then plugged other mics into that. The more recent iVoice II works OK.
When you've attached one of these USB audio input devices, check your System Preferences>Sound, click on the 'Input' tab, and make sure that the USB device is selected and is working properly.

Sountrack or Logic/Logic Express for voice over recording?

Hello,
I am wondering which software is best for voice over work? Sountrack or Logic/Logic Express?
Any input would be great. I would add the standard effects/filters to certain voice overs and add sound effects and music.
I have a midi/guitar and garage band is enough for me. I would not want to use Garageband as my software of choice for voice over work. I want markers and other more advanced tools?
Thanks,
Erik

Thanks for the answer.
I was looking at the Dialogue Tools in Sountrack and they appear to be perfect.
My main questrion is can record into Sountrack with a mic right? I have an m-audio saphire with a m-audio preamp.
I saw a demo of Soundtrack at NAB and all the effects looked perfect for voice over. I think Logic Studio is overkill but Sountrack and Logic Express( for my guitar) might be a perfect 1-2 punch. I will get Sountrack with The Final Cut Studio as I need video tools as well.
Thanks,
Erik

External recording indication for voice over recording

hi,
i'm wondering if there is any way to get recording indication for voice over recording out of final cut pro or soundtrack pro. i need to get the 'on air' signalization to the speaker room which is not the same as editing room.
i'm looking for something like
http://www.punchlight.com/?q=node/10
which i'm used to use with protools. does anybody have any idea?
thanks for help

How about a switch you throw to turn on a recording light in the booth? I think less tech here is likely better.
Jerry

Config 2811 with NM-HDV-2E1-60 module for Voice over IP

Hi,
How should I config 2811 with NM-HDV-2E1-60 for voice over IP?
Which IOS I should use?
I can't define "Controller e1".
Can any one send me a configuration example file?
Tanx

Can you provide more info?
How are you trying to use this? Are you going to use this router as a CallManager express or in conjunction with CallManager server?
Can you provide a sh ver and sh run and a sh diag from your router? Do you have a design document of the set up that you have in mind?
Also please note that if you want to change the feature set of IOS that comes with the router, you need to purchase the software from Cisco, as you need to be able to upgrade to another IOS. This upgrade is not free.
Looking forward to hear more about your set up to be able to help you.
Regards,
Farbod

Sountrack or Logic/Logic Express for Voice Over work?

Hello,
I am wondering which software is best for voice over work? Sountrack or Logic/Logic Express?
Any input would be great. I would add the standard effects/filters to certain voice overs and add sound effects and music.
I have a midi/guitar and garage band is enough for me. I would not want to use Garageband as my software of choice for voice over work. I want markers and other more advanced tools?
Thanks,
Erik

Hi Erik,
I haven't used Logic or Logic Express, but I recently switched from Pro Tools to Soundtrack Pro 2. (I'm an independent producer/host for 2 weekly shows on Connecticut Public Radio.)
All I can say is this-- Soundtrack Pro has shaved hours off my Pro Tools workflow, is much more intuitive, and is (obviously) Mac-friendly, so I've been singing its praises ever since I made the switch.
In fact, I think Apple should be marketing it directly to radio stations!
Hope this helps,
Bruce
www,barberproductions.com
www.rlsguide.com

Garage Band for voice over

I would like to use garage band for Voice Over auditions. Would it be best to use "Create a Song" setting or "Podcast" to do this kind of work? Thank You in advance.

(Deleted since the question has moved to the GB3 forum)

Using iTouch microphone for voice memos - What do I need?

From what I understand the 2nd Gen touch has the capability to record if one uses an external microphone. Griffin makes something called a "Thumbtack" microphone for $12.99 but says you also need to purchase a "2nd party app" to use the feature. Is this correct?
They also say that you have to transmit the voice memos to your PC over an email not by direct upload over a sync cable. Is this accurate?
Any help would be appreciated as I am new to the touch. I also have a 5th Gen Nano which, from what I've read, works the same way......

sharepoint could definitely be acessed from a browser on an iOS device....you might want to start with the enterprise deployment guide..the question you have is a big one and there are a lot of operational issues.....the deployment guide will start with how to implement iOS devices in an enterprise environment...
http://www.apple.com/support/ipad/enterprise/
hope this helps as a starting point...

Unable to record audio for Voice Over from camera

Hi All:
I have an early 2008 black macbook, FCE4 and a canon HV 30 with an xlr adapter and mic. Imported all my footage just fine. Now I want to record a voiceover track using my nice mic through the camera. I plug in the camera to the computer via firewire. When I go to Voice Over Tool and try to select DV Audio, it tells me this:
"The Selected sound input device is unavailable.
It may be in use by another application, disconnected or improperly connected, or may be conflicting with a video output device."
Uh, okay. I check the manual, it warns me that "External Video" under the View menu must be to OFF. Problem is, there is NO "External Video" option whatsoever in the View menu! None! Whatsoever!
My firewire port is functioning, the computer knows there's a camera attached to it (I checked the Hardware overview, and surely enough the computer detects the camera)...
What am I doing wrong?

I have Built-In Microphone, Built-In Input and DV Audio as source options...but I only get the above-mentioned error message when I select DV Audio. Even when I don't have the firewire & camera connected, I get that same error message when I select DV Audio...which makes me think that the computer doesn't detect the camera, but I know it does because the computer detects a Canon HV 30 in System Profiler (and I can capture w/o a problem...I just click Capture and press escape when the tape end is reached).
And what I meant earlier about capturing is that a window does pop up whenever I'm capturing from my camera and it shows the footage during capture, but the computer does not automatically respond to just my plugging the firewire cable in (idk if it's supposed to recognize it and ask me if I want to capture or not, but it doesn't...I have to prompt it to capture)
I'm also puzzled that I don't have an External Monitor option under View...I'm not using an external monitor, and the only thing close to External Monitor under the View menu is Video Out, under which there are: Refresh Video Devices, Toggle Last, Canvas Playback & Digital Cinema Desktop Preview - Main.

GB vs Sound Studio 3 for Voice over

I had some experience with Sound Forge on the PC side. I need a flexible editor for professional voice over recording and editing...giving me ability to record, edit from multiple takes on a single track, listen closely (and possibly loop small chunks of audio), edit words closely, take out breaths, etc. Anyone with some experience in these matters steer me to Garageband or Sound Studio 3 as rtgew best choice?. I do not seem to have as much control over the placement and control of the cursor with GB.... I seem to be chasing it all over the waveform. But then again, maybe its my own techno-moronity. Please help me, my-smarter-than-I-am-on-these-things friends!
MacBookPro Mac OS X (10.4.7)

Your help is gushingly appreciated.
You're quite welcome, always happy help out a fellow NEer
I have not used version 5 of Peak, but I've been using older versions for, hmmm, maybe 5 years. I'm not particularly fond of Bias software's tech support, however the software is really good, and I've put many hours into it and achieved great results.
Still, don't over look the free options. Lots of people like Audacity, and since it's free, I'd suggest trying it. Then if you don't find it works for you, try something else.
Good luck --HangTime [Will Compute for FOod] %-|>

Imovie limits for voice over?

I did record a training with camera and a separate recording for audio. Now Im trying to put it together. But when I bring the audio into the project with the video it only sounds for about 7 mts 20 seconds.
Is there any limit for I movie?. I dont believe so
Can anyone give me any hints to solve my problem and have all the audio with sound with my video?
Thank you very much

Sorry, My english not good enough. What Im adding to the video its not a voice over. It is a soundtrack mp3 (with only voice).
its a 1 and half hour track and it sounds only 7mts.
Same problem in two different trys.
Thanks for help

Sound capture hardware/software for voice over work

Sorry if this is a little off topic,
Environment: Production Premium CS3 (Windows)
I'm doing voice over audio capture for web videos. Currently, I use Soundbooth or the sound card software (Creative Labs) to capture.
1. What is the best mic setup? I use a $30 headset boom mic. Is there a better way? I would rather record clean than spend time trying to clean up the audio. Any links to tutorials on setting up an audio studio?
2. Should I use Soundbooth to capture?
thanks for any ideas,
fred

I use a $50 headset. I use Sb to capture VO audio. I also use Sb to clean up the audio.
If your room is fairly quiet or if the background noise is constant, then you can clean up the audio in Sb quickly. No need to go to the expense and trouble of creating a studio.
The trick is to capture 15-30 seconds (sometimes you can get away with less) of "silence" in the room so that you can use it as a noise print for the NR tool in Sb.
I've had good success using about 75%-80% for the amount of reduction.
Example here:
Creative Cow Tutorial
-Jeff

Microphone for voice over.

Similar Messages

Maybe you are looking for