Microphone has static & doesn't work with FaceTime or photo/movie, any suggestion?

The microphone on the iPad does not work, on face time. Any suggestions?

Hi !!!
have you gone into the creative console launcher and in the settings have you enabled the 20+ Db bass setting ? if not go to ventrillo settings and increase the slider for the output!!!! it will prompt you to go to the 20+ db setting and change it......
If it stil doesnt work, not being funny but you can hear yourself on the test? so the mic is on and receiving? go through the control panel/ sound/voice/setup and run the test program..if that works and ventrillo doesnt!!!! Pray !!!
!!! no just laughing......re install it and go to the site and ask for advice..
Sorry this is all i did and it worked.....
Have fun..
:smileytongue:

Similar Messages

  • HT204380 My apple ID doesn't work with FaceTime after IOS 6 update

    Once I updated my IPAD to IOS 6 , my apple ID stopped working with FaceTime and iMessage
    Every time I enter the password, it says that apple Id is not matching
    I am sure that it is the right one, I checked it in iCloud and iTunes, it is working well.  

    Something as simple as your method of payment having expired could be causing your problems. Use the link below to check all info, especially your payment info, for your Apple ID.
    https://appleid.apple.com

  • T510i microphone mute button doesn't work with Win 7 x64bit Ultimate

    Did anyone managed to make it work  microphone mute button, with Win 7 x64bit Ultimate on t510i? On win 7 x32bit Proffesional it worked fine.
    Any suggestions?
    Solved!
    Go to Solution.

    Hotkey installed?
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014985
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • I can't get Safari work with Java 7 version 20 any suggestions?

    I can't get the newest version of Java to work with Safari 6.02.   It doesn't recognize it .  Works fine with Firefox.

    If you have Java 7u13 installed in your system, but it isn't working with Safari, you will want to ensure the plugin is properly enabled.
    1.  Under "System Preferences...", you will want to open the Java preferences pane (which will open a new window).  Under the Security tab of the Java prefences pane, ensure "Enable Java content in the browser" is checked.  This will allow Java web content to be used globally (if Java works under Firefox, this is probably already checked).
    2.  Open Safari's Preferences.  Under Security there are four checkboxes grouped under the label "Web content:".  One of them is Java.  Ensure it is checked.
    Be aware that enabling Java in the browser does open you up to any Java vulnerabilities.  Best practices are to only enable Java when you need it, and disable it otherwise.

  • Fullscreen doesn't work with Silverlight for Netflix movies

    Recently, when I restarted watching Netflix, I can't go to Fullscreen. I called Netflix and they had me reinstall Silverlight, which I did, but to no avail. Any ideas here?

    Go to the AT&T support site and verify that you have setup Mail with the correct confuguration, i.e., ports, server names, etc. Otherwise, you haven't provided enough details to be of much assistance.
    Rcommend that you get a .me account and start using IMAP email in lieu of POP3. You can then configure your existing AT&T account to forward all email to your .me account.

  • Running MacOS 10.6.8 & FF 3.6.17, upgrade popup to 3.6.20 doesn't work (just sits and spins forever) - any suggestions?

    I have a MacBook Air running MacOS 10.6.8 and am using FireFox 3.6.17. I get an auto upgrade popup suggesting that I upgrade to 3.6.20. However, when I select to perform the upgrade, the download box comes up and acts like it is downloading, but it never actually downloads the upgrade. I tried version 4.0, but that didn't work right, so I would like to say with version 3.6, but would like the latest upgrades if possible.

    Ran the OS X verify and repair util it fixed a fair few permission issues, then tried to add in a 2nd sample in logic - re-indexed still showing the first initial sample.

  • Reaxys cannot find the Java applet, although I have Java 6 (build 1.6.0_22-b04) on the machine and it works with Firefox 3.6. Any suggestions? : (TypeError: applet.getVersion is not a function, function getVersion() { [native code] })

    Reaxys (Research/Chemistry database) uses ChemAxon MarvinSketch (Java based editor). I have Java 6 update 22 on the machine and everything works fine under all older Firefox versions.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • HT5037 It doesn't work for me. Anyone got any suggestions? Just gets into a loop where I upgrade and then launch and it says I need to download the upgrader and upgrade again. Help!!

    I want to open some old iphoto libraries. The new iphoto says I have to upgrade the library, so I downloaded the upgrader and ran it on the library I wanted to upgrade and still it would not open, just kept giving me the same error message about needing to upgrade the library!! How can I open that old library file?

    Did you go to Applications/Utilities and find the upgrader app and then double click it?

  • Since updating my iphone 4s to iOS 6.1.1 my Wi-Fi network won't come up in the Wi-Fi menu and on the occasion when it does come up it doesn't work and just goes away. Any Suggestions?

    It is getting really annoying!

    same *** my iphone 4s this sad i can even used my wifi because it is disable i hate this

  • My universal dock doesn't work with my iphone4s !!

    Hi, good day,
    My universal dock doesn't work with my iphone 4s, but it work with my ipod touch 4th gen. Its actually works on both of my device back then, and i din't use the dock for few month, now I can't use it woth my iphone. I did  restore both of my device but it still doesn't works with my iphone.
    So any solution to solve it??
    Thank you. ^_^

    Please explain.
    What does "cellcom line doesn't work with my iPhone" mean?
    What are you trying?  What is happening?
    Where did you buy the iphone?
    Any info abnout your issue at all?

  • TS1702 I bought an app for smileys, etc. can't get it to work on iPad or iTouch. Any suggestions? Other than just suck it up!

    I bought an App for smileys, etc. doesn't work on iPad or iTouch. Any suggestions?

    They said that there shouldn't be any reason for it not to work. I bought it off ebay and the previous owner used it on the same devices that I am

  • Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

    Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

    The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
    You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
    Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
    This is done via a Jump to Sheet Automator Service (Dropbox download).  To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
    This will cause a new item to appear in your Numbers > Services menu.  Then, if you want a keyboard shortcut, go here in System Preferences and add one:
    You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
    This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
    SG

  • My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

    My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

    Follow the steps here. If nothing works, make an appointment at an Apple store or with whoever handles iPhone warranty where you live:
    http://support.apple.com/kb/TS1398

  • I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    Mike wrote:
    > Could someone tell me why this prototype-based lightbox
    seems to work on one
    > of my sites but not on the other?
    >
    > I literally took the exact same .js & css files,
    copied them over from one
    > site to the other, but it's only partially working on
    the new site.
    >
    > Works :
    >
    http://www.roxanacampagiorni.com/
    >
    > Doesn't work :
    >
    http://www.vilverset.com/sample.html
    >
    > Been troubleshooting this one for days, and I'm stumped.
    Script wants
    > nothing to do with lightboxing HTML files on the new
    site. Only straight
    > JPGs. But it was written to work with them, and it
    *does* work with them
    > just fine on the *other* site.
    >
    > Where is the anomaly between the two sites that's
    causing it to break in
    > sample.html?
    >
    >
    Not sure if this is relevant but on the page that works you
    have these
    js files linked - 4.....
    <script type="text/javascript"
    src="/scripts/jscripts.js"></script>
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    and on the page that doesn't - 3......
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    HTT
    chin chin
    Sinclair

  • TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    What have you tried?
    You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
    Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
    Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
    Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

Maybe you are looking for

  • Time Machine Running Very Slow After Repairing Permission under "get info"

    Hi, I have a timemachine backup external hard drive which had permissions problem (perhaps this is because I crossed over from 10.5 to 10.6 at some point?)  When I enter timemachine some files had that red minus sign beside it and told me "you don't

  • Help with Ethernet connection

    My daughter has upgraded to a G4 Powerbook, so I've got her previous laptop, an iBook G3 dual USB. I'm basically a PC user, so am new to Apple and OSX. I've been trying to connect to my DSL service, have created a New Location in Network settings, se

  • Copying table stg to datamart

    below is the code and preview of the stg to datamart.It is returning nme null values in destinayion.What do you think is wrong. Thanks. SELECT [BATCH_AGENCY] ,[BATCH_DATE] ,[BATCH_TYPE] ,[BATCH_NO] ,[DOC_INDEX] ,[LINE_NO] ,[FUND_SPLT_SEQ_NO] ,[DUP_RE

  • Upgrading from PSE 9 to 12

    I tried to do this several times but each time it failed. When I checked my account it said that "It may take 24 hours for my order to be processed. Is this the reason why my download failed?

  • File open dialog doesn't appear after a period of time in latest version of Illustrator CC 2014

    Hi All, Is anyone else having a problem doing a File > Open after using Illustrator for a while? I select File > Open and nothing happens after I've used Illustrator for a while. Doesn't seem to be any pattern to it, the File Open dialog just doesn't