Microphone - Help please

Hello. My Name is Gal. I have professional microphone but i don't know how to?make it sounds good. I have a mp3 playback and i want to sing for free with echo.Please help me!!!Thanks, Gal.

You need to post your system details and the creative sound card you bought to the forum and someone will tell you what scoket to plug it in and how to use audio console (blue one) to get microphone to work, default is mircophone off. krishan

Similar Messages

  • Hi, microphone help please?

    Hi, I have had my ipod 2nd (it may be third) generation ipod touch for about a year now. The headphones, which included a mic, all of a sudden stopped working after the latest update. Can someone tell me how i can get my mic working again? Thanks,
    Aaron

    Have you tried a different pair of headphones with mic?

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help please no luck recording vinyl thru line-in port on External USB Soundblaster Live 24bit

    Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.

    hardingt2345 wrote:
    Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.
    Have you tried by installing www.asio4all.com drivers and then by using some?ASIO capable recording software as like Kristal, VSTHost, Reaper, etc (there are many others available)?jutapa

  • Will using a microphone help my ICD-AX412 in this occasion?

    So I understand that using a lavalier microphone helps improve the quality of the sound, mostly because you can attach it to your collar to better capture the voice. However, would it improve the quality of my voice recording if both the recorder and the microphone are together in an enclosed space?
    I ask this because I need to record while having my recorder in my backpack, for reasons. It works decently enough but I am wondering if a microphone in there would improve the quality or not.

    Just take note of these general guidelines in order to get audio quality recordings from the IC Recorder:
    Verify that nothing is rubbing up against the microphone when recording.
    Verify that the unit is not placed near an AC power source, fluorescent lamp or a cellular telephone when recording.
    Ensure fresh batteries are installed.
    Use a can of compressed air to blow into the built-in microphone to remove any built up dust or dirt.
    If an external microphone is being used, verify that the microphone is clean by wiping it with a dry, lint free cloth.
    Reset the unit by removing the batteries for at least 1 minute.
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    There are no updates to either OS 10.5.8 or Safari 5.0.6.
    If you need a later version of Safari you must first upgrade your operating system to a later version of OS X.

  • At the end of my IMovie I want to write some text: as in" Happy Birthday Mandy we had a great time with you. etc..  How do I go about this? Which icon in IMovie lets me have a place to write text?? help please

    Please see my ? above: Im making an IMovie and need the last frame to just be text (can be on a color). I don't know how to go about doing this.  Ive already done all my photos and captions. Need to have it ready for TOMORROW: Friday May 23rd. Help please!
    Thanks

    You can choose a background for the text from Maps and Backgrounds.  Just drag a background to the end of the timeline, adjust to desired duration then drag title above it.
    Geoff.

  • I have just updated my PC with version11.14. I can no longer connect to my Bose 30 soundtouch via media player Can anyone help please

    I have a Bose soundtouch system .Until today I could play my iTunes music through it via air  player . .I have just uploaded the latest upgrade from iTunes and now I am unable to connect to the Bose system . Can anyone help please? I can connect via my iPad and by using the Bose app so it is not the Bose at fault

    @puebloryan, I realize this thread is a bit old, but I have encountered a similr problem and wondered if you had found a solution. I've been using home sharing from itines on my PCs for years, but two days ago, it suddenly stopped. I can share from my Macs, but not from the ONE PC library where I keep all my tunes. I tried all the usual trouble-shooting measures.
    After turning home sharing off on the PC's iTunes, turning it back on and turning some other settings off and on, my Macs and Apple TV could briefly "see" the PC library, but as soon as I try to connect -- the wheel spins for a bit and then the connection vanishes. It's as if they try and then give up.
    Since this sounds so similar to your problem, I was hoping you finally found a solution. I am also starting a new thread. Thanks!

  • My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

    My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
    Thank. Simon

    Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
    Thanks, Simon

  • Photoshop Elements 6 on Mac help please !!!!!

    Hi there,
              I need help please !!!!!
    I have PSE 6 for my imac and bought myself a NIKON D60 so far so good. I have installed PSE 6 which comes with ADOBE Bridge CS3
    I have bought a book as well as I am new to photoshop and in fact DSLR cameras.
    I have got my photos into Bridge OK by the way they are JPEG format. According to the book I can open the JPEG in camera RAW by either selecting the JPEG and then pressing cmd+R or by selecting the JPEG and select open with and camera RAW should be available to selct.
    I cannot get of the options to work any ideas please
    Secondly I have taken some photos in RAW format and put then into Bridge again I cannot get the camera RAW interface to open with these neff images.
    If I try to open the image PSE 6 opens and gives me an error that the file format is not supported by PSE 6
    Am I missing something here as I have been trying for a week now !!!!!
    Sorry if this comes across a stupid question but it is new to me
    Chris      UK

    There's no "theory" about it. You should be able to open a raw file from bridge by double-clicking it, but it will open in ACR in PSE. You can't just use ACR within bridge in PSE, if that's what you're trying to do. To open a JPEG in ACR, go to file>Open in PSE and choose Camera raw as the format after you select the file but before you click Open.
    If you've correctly updated ACR, bridge should show you thumbnails of your raw files. If it doesn't try emptying the Bridge cache.

  • Photoshop CS2. Help please.

    Approx 8 years ago I purchased Photoshop CS2 online from Adobe. This past weekend I had to buy a new computer (Windows 8.1), and when I logged into my Adobe account just now to obtain my serial number and enter it after I attempted to download CS2, it said invalid serial number. Help please.
    Both tech support and the online chat person were not able to help me.

    The Activation Servers for CS2 and prior have been taken down. See the link below for an explanation and solution. Be sure to follow all directions, including using the new download serial number supplied on the page.
    CS2 and prior
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    --OB

  • I  used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

    I  used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

    If you still have your serial number, look at OLDER previous versions http://www.adobe.com/downloads/other-downloads.html
    Otherwise, the US$ 9.99 plan is what is current at Cloud Plans https://creative.adobe.com/plans

  • Creative live cam voice help please

    Help please,
    We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
    Regards,
    Arthur

    Thanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
    If I cannot resolve this, can any one suggest another webcam please.
    Regards,
    Arthur

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it

    I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work

    Hi Timia,
    If you are using Safari as a web browser :-
    Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
    If you are using Google Chrome as the web browser :-
      Open Google Chrome.
      In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
      In the "Search" section, select Google from the drop-down menu.
    Let me know if you still experience any issue.
    Regards,
    Aadesh

Maybe you are looking for

  • Can I use a old dot matrix printer with my mac

    I want to add a old Panasonic KX-P2023 and use it as my printer. I have a mac osx 10.7.5 is this possible??

  • Apple TV 2 Mirroring Poor Quality.........

    When my iPad 2 mirrors to my Apple TV 2, it goes to a very poor quality. Help!! I have tried changing the default resultion on the Apple TV (Menu & Up for 6 seconds), still to no avail

  • Can't connect through sqlplus

    I can connect to a remote database through sqlplus only if i specify the sid: bash$ sqlplus system@dbsid Connected to ... if i don't, i get this error: ERROR: ORA-12545: Connect failed because target host or object does not exist local machine has ju

  • No Search or Profile themes - Please help

    I have read that there are some indexing issues on the search, but it looks like the user profiles do not have any themes. Themes will come up in the RSS and the ratings, but if I click on the user to see what other themes they produced, it says ther

  • Wait event enq: JD - contention

    Hi All, In the top-5 wait events of the AWR-report i encounter a enq: JD contention wait event (wait class Other). I only figured out that JD means Job Queue Date. Can anybody tell me more about this wait event? Thanks in advance, Jeroen van Schaijk