Microphone help with Presario F700?

Hi there everyone, I have a Presario F700 notebook that uses Vista. I recently learned that it comes with a microphone in it but despite my best efforts I can't seem to get it to work. The computer is telling me the microphone is active and enabled yet it doesn't seem to pick up any sound.
Here's the info for my mic:
   Description: Microphone (Conexant High Definition SmartAudio 221)
Default Sound Capture: Yes
Default Voice Capture: Yes
            Driver Name: CHDART.sys
         Driver Version: 4.31.0000.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 9/8/2007 21:12:28, 176640 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF
I'm still pretty much an amateur when it comes to computers, so if more information is needed or anyone has any ideas, please let me know.

I am also an amateur but I had a similar problem with my HP. I bought a set of headphones and that worked for me- try to borrow some and test your computer.

Similar Messages

Microphone Help with Audigy4

I have the Sound Blaster Audigy4 7. and need to set up a mic with in order to use Team Speak. I have it plugged into the mic jack and have muted the mic in the settings but still cannot get the mic to work when using Team Speak. Can anyone help? This is driving me nuts, I have a 9 year old pc and my mic and Team Speak work just fine on it.

Here is why I said I had the mic "muted", this is a forum discussion from the Team Speak website;
"As I said, your settings regarding your soundcard and the recording are not correct. Most probably it is not really the local test that you are hearing but rather the direct input of your microphone. While your recording settings are set wrong, your soundcard is set to directly playback everything which is "spoken" into the microphone. Make sure that you have set your microphone to "mute" in the playback options and set as source in the "recording" options."

Also, I checked the recording device and I do have the microphone as the recording device.
Message Edited by JAG on 08-3-2006 0:24 AM

Need Compaq Presario F700 Motherboard

I am using Need Compaq Presario F700 since 2 yrs. but suddenly my laptop stop working. It does not even start. I showed it to some people but they are not assuring me about the repairement. As per them it is now scrap and will cost 8000 rs for repairment with just 2 months warranty.
I need a new motherboard pl help me in this direction.

We need your exact model number or better yet the motherboard model. Remove the memory cover and the memory chips and the motherboard model is engraved on the motherboard right where the memory chips are.

Compaq Presario F700 Laptop - Ethernet Replacement (NIC)

Hi All!
I recently downgraded my laptop to XP. I've had the hardest time finding drivers for the LAN. So I finally found them and now the connection is always limited or no connectivity when plugged via ethernet.
I tried to release and renew the IP address, but the system is unable to renew it through CMD. My internet works fine with my other two computers. I've used the same ethernet cord that is connected to this computer to my laptop and they all result in limited or no connectivity.
I'm thinking the NIC needs replacing but I cant find the replacement part number. I only see the number for the WLAN. Would that be the same part? I didnt think so, because the wireless is fine, it is just the LAN connection that I seem to have a problem with. I dont even see where I can access the ethernet adapter from the bottom of the laptop.
I got the replacement part from this thread - http://h30434.www3.hp.com/t5/Notebook-Hardware/Compaq-Presario-F700-Laptop-NIC-Replacement/td-p/1639...
Anyone know what part I would need to replace the LAN ethernet adapter, not the wifi? (unless they are the same, want to make sure before I order it).
Thanks!
This question was solved.
View Solution.

Hi:
In order to replace the ethernet adapter you would need to replace the entire motherboard.
The link you referred to (which I answered way back when), was to replace the wireless network card.
I recommend you just purchase a USB to RJ-45 ethernet adapter until you buy a new PC.
If your notebook has an amd processor, this is the XP driver that you should be using.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42431-1&cc=us&dlc=en&lc=en&...

Microphone problem with POE 13

m@y microphone works with windows 8.1 but Premier Elements 13 will not recognize my "Realtech High Def Audio device.Any suggestion?

coo-gar
Premiere Elements 13 on Windows 8.1 64 bit.
Have you updated your Premiere Elements 13 to 13.1 using an opened projects Help Menu/Updates? If not, please do so.
What type of microphone do you have? Classically, USB microphones do not work with the Premiere Elements (many versions) Narration Tool. However, there are scattered reports where the user claims to have used a certain brand of USB microphone successfully with Premiere Elements Narration Tool. Often the ReadMe files would mention this situation. Although I do not see that mention in the Premiere Elements 13 ReadMe, that does not mean that the problem does not still exist.
One workaround, if no alternative, is to create the narrations in a free program such as Audacity, and then import the narration (wav) saved to the computer hard drive into your Premiere Elements product with its Add Media/Files and Folders.
Please review and consider and give more details.
Thank you.
ATR

Microphone problems with hp dm3 3110 us

hi, im new to this.
I am trying to record directly from the mixer and somethimes from my external microphone. however my hp pavillion dm3 3110 laptop is also picking up the internal microphone. I tried muting the internal microphone but then the extenal one becomes disabled.
I usually record lectures and it is important for me to have the internal microphone disabled or not interferring while i am actually trying to record straight of the mixer or with my external mic.
If you guys need more info pls let me know. I seriously need help with this as this was the main reason i bought this laptop.
Thanks

@kextech
Hi,
You notebook have webcam with integrated microphone. so you may try something like this:
Click Start, type Device Manager , and select Device Manager from the list provided.
Double-click Imaging Devices to expand the list of webcam drivers.
Click with right button of your mouse on webcam and choose Disable.
Check is this problem solved or not.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Presario f700 black screen at start up,

presario f700 black screen at start up, if left to own it flashes hard drive light once fan starts then turns off the starts again can get it to stop this sequence by pressing certain keys but screen always stays black and remote screen does not turn on. Have tried removing memory, hard reset, removed ram, have tested hard drive out of device. Anything else I can try.
Book says 15secs for a hard reset, one post said 30secs, which is correct

Hi, 30 secs is the better of the two options there. I am assuming the Hard drive tested fine? You can try turning the computer on with out the hard drive in it and see if you atleast get some text saying not bootable device or if you are able to boot into BIOS. If this does not happen you can switch out the ram chips. (boot with one chip then take it out and boot with the other) see if these work. If these steps fail its more than likly more of a hardware issue with the systemboard.
While I may work for HP, my posts and replies are my own and should not be mistaken for statments made by HP as a whole.

Help with a Flash project im attempting

need a little help with the direction of where i want to go
with a flash app im trying to make. What it is that im doing is an
prototype application for a treasure hunt. (The prototype is so
that it can be used on a hand held PDA) the specification are
below:
A Treasure Hunt provides participants with clues which leads
them to discover a route and requires them to answer questions
along the way. Answers are scored as follows:
Correct answers 10 points
After 1 hint 5 points
After 2 hints 2 points
Incorrect answers -2 points
The 2nd hint gives the exact position on the map so that the
participant can keep to the route and not get lost.
I am going to design a Flash application (for the Flash 6
player only) which will run on a mobile device (PDA) with Windows
Mobile 2003 as the operating environment with a small screen
240x320 pixel resolution either portrait or landscape and 65K
colour depth. The device has a pointing device (stylus),
microphone, speaker and earphone socket. It is WiFi enabled to take
advantage of WiMax which will enable mobile devices to access the
internet over a wide geographic area such as a town.
I have considered providing the following functionality:
· Setup options eg: choose the Treasure Hunt from
alternatives, language options, accessibility options such as voice
output (could simulate voice command input)
· Present clues as either text or image (could simulate
voice output)
· Provide access to the internet eg: Google for
searching for information
· Keep a record of the score and allow participant to
keep track
· Present progress along the route on the map
–needs zoom in/out and/or scroll
· Save progress if a pause is needed
· Total time taken
· Provision for one or more sponsoring
organisation’s advert/logo (doesn’t have to be on
screen all the time)
Now ive been trying to think for the last couple of days what
the best way to create this is, but im having a really big mental
block on it. Now im not the best at flash, so it need only be a
basic application. I know how im going to do the map and then
language changes but thats about it at the moment.
So can anyone give me any advice on how to go about creating
this sort of thing, if you could give me any information, and where
would be the best place to start - i'd appreciate it greatly!

Thinking about it, (its late) because its only a prototype
that i have to create, it doesn't necessarily have to work, im only
just showing examples of what it can do so all of those features do
not have to work correctly. That sounds about right doesn't it? lol
jees im tired :D

Will using a microphone help my ICD-AX412 in this occasion?

So I understand that using a lavalier microphone helps improve the quality of the sound, mostly because you can attach it to your collar to better capture the voice. However, would it improve the quality of my voice recording if both the recorder and the microphone are together in an enclosed space?
I ask this because I need to record while having my recorder in my backpack, for reasons. It works decently enough but I am wondering if a microphone in there would improve the quality or not.

Just take note of these general guidelines in order to get audio quality recordings from the IC Recorder:
Verify that nothing is rubbing up against the microphone when recording.
Verify that the unit is not placed near an AC power source, fluorescent lamp or a cellular telephone when recording.
Ensure fresh batteries are installed.
Use a can of compressed air to blow into the built-in microphone to remove any built up dust or dirt.
If an external microphone is being used, verify that the microphone is clean by wiping it with a dry, lint free cloth.
Reset the unit by removing the batteries for at least 1 minute.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Compac presario F700 bios recovery need

Have black screen and poer light goes on and off.

Hello @Chuck7 ,
To get your issue more exposure I would suggest posting it in the commercial forums since the Compaq Presario F700 Notebook is a commercial product. You can do this here Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: Compaq Presario F700 Notebook PC series.
I hope this helps!
Thank you for posting on the HP Forums.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Microphone help with Presario F700?

Similar Messages

Maybe you are looking for