Microphone input recording source while using Steam/Ventr

I own the Sound Blaster Audigy 2 Zs. I also use a voice program called Ventrilo while
playing CounterStrike/Steam. My problem occurs when I play counterstrike. I go into the
surround mixer and choose Line-In 2 as my recording source as that is where I have my
microphone plugged into. It works fine normally, but when I open up Counterstrike/Steam
the surround mixer changes my recording source to the microphone, instead of Line-In 2.
It also does it every time I restart my computer. I would like my recording sourece to
always be Line-In 2 but for some reason it doesn't like to be that. Is there some file I
have to change so that it will always remain as the Line-In 2 or something else I have to
do? Any help will be much appreciated.

dr_bay2,
This was down to the game and it's setting. You can try the solution from Steam website and see if it hel
ps.
Jason

Similar Messages

How do I use the built-in microphone on my iMac while using Windows XP?

My iMac has a built-in microphone. My computer is set up with a partition to run either mac or windows. I would like to use the built-in microphone feature when I am using Windows XP. Is there any way that I can do this?

Hi and welcome to Discussions,
assuming you have installed the neccessary BootCamp Drivers from the OSX Leopard DVD the internal mic is useable with any kind of recording software.
Windows itself has a rather rudimentary Audiorecorder program built-in.
For a more sophisticated recording program have a look at Audacity http://audacity.sourceforge.net/
Regards
Stefan

Problem creating schema source while using WebService in MessageMapping

Hi, scenario is RFC2WS.
Problem that occurs is that when i want to use a method from WebService in MessageMapping XI won't import the structure. I am getting following error. The WSDL is from an external portal on which a WebService is ready to invoke.
<b>What might be the problem?! </b>
<i>
Problem when creating schema source:
Details
java.lang.NullPointerException
STACKTRACE:
com.sap.aii.utilxi.misc.api.BaseException: java.lang.NullPointerException
    at com.sap.aii.ib.gui.xmleditor.docview.views.XsdSchemaTextable.setSchema(XsdSchemaTextable.java:86)
    at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.setSchema(XsdContainerTextView.java:46)
    at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.<init>(XsdContainerTextView.java:36)
    at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.makeFromTreeDoc(MultiViewEditor.java:216)
    at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.<init>(MultiViewEditor.java:64)
    at com.sap.aii.mappingtool.mf.TransformationPanel.createTargetView(TransformationPanel.java:264)
    at com.sap.aii.mappingtool.mf.TransformationPanel.<init>(TransformationPanel.java:100)
    at com.sap.aii.mappingtool.mf.MappingTool.<init>(MappingTool.java:32)
    at com.sap.aii.mappingtool.api.MappingToolFactory.getInstance(MappingToolFactory.java:96)
    at com.sap.aii.mappingtool.fwutil.util.ToolUtil.restartTool(ToolUtil.java:315)
    at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView.loadIfrSchema(XiTransformationView.java:274)
    at com.sap.aii.ibrep.gui.mapping.xitrafo.XiMappingView$LinkDataTarget.setData(XiMappingView.java:378)
    at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView$MessageDataTarget.setData(XiTransformationView.java:973)
    at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.setData(DataTarget.java:514)
    at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.drop(DataTarget.java:462)
    at java.awt.dnd.DropTarget.drop(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer.access$800(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(Unknown Source)
    at sun.awt.dnd.SunDropTargetEvent.dispatch(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.processDropTargetEvent(Unknown Source)
    at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Window.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
STACKTRACE:
java.lang.NullPointerException
    at com.sap.aii.utilxi.xsd.api.XsdHandler.saveSchemaToDocument(XsdHandler.java:61)
    at com.sap.aii.ib.gui.xmleditor.docview.views.XsdSchemaTextable.setSchema(XsdSchemaTextable.java:82)
    at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.setSchema(XsdContainerTextView.java:46)
    at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.<init>(XsdContainerTextView.java:36)
    at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.makeFromTreeDoc(MultiViewEditor.java:216)
    at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.<init>(MultiViewEditor.java:64)
    at com.sap.aii.mappingtool.mf.TransformationPanel.createTargetView(TransformationPanel.java:264)
    at com.sap.aii.mappingtool.mf.TransformationPanel.<init>(TransformationPanel.java:100)
    at com.sap.aii.mappingtool.mf.MappingTool.<init>(MappingTool.java:32)
    at com.sap.aii.mappingtool.api.MappingToolFactory.getInstance(MappingToolFactory.java:96)
    at com.sap.aii.mappingtool.fwutil.util.ToolUtil.restartTool(ToolUtil.java:315)
    at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView.loadIfrSchema(XiTransformationView.java:274)
    at com.sap.aii.ibrep.gui.mapping.xitrafo.XiMappingView$LinkDataTarget.setData(XiMappingView.java:378)
    at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView$MessageDataTarget.setData(XiTransformationView.java:973)
    at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.setData(DataTarget.java:514)
    at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.drop(DataTarget.java:462)
    at java.awt.dnd.DropTarget.drop(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer.access$800(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(Unknown Source)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(Unknown Source)
    at sun.awt.dnd.SunDropTargetEvent.dispatch(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.processDropTargetEvent(Unknown Source)
    at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Window.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
</i>

Hi ,
Can you please cross check these steps carefully.
1. After importing the WSDL using external definition, did you checked msges Tab for for the included msg to see what msges you have added.
and be careful that the namespaces of the messages are part of the WSDL description and can differ from the namespace of the external definition object.
2.Did you created message Interface corresponding to the message types from the external definition? it is needed to route the message to webService. Here select message types of the external definition object. Assign input and output messages.
3. Creating a SOAP Receiver Channel
To call the Web service, you create a communication channel with type SOAP and
direction receiver in the Integration Directory. The obligatory parameters in the
configuration are Target URL and SOAP action. You get the values you have to enter
here from the WSDL file.
Creating a SOAP Sender Channel
When you create a SOAP sender channel you have to define the namespace and the
name of a message interface. Since no input help is provided, you copy and paste the
values from your Integration Repository.
Select the Quality of Service according to your interface type. If you are using a
synchronous interface, select Best Effort. Otherwise, select Exactly Once or EOIO.
Hope this will help you to figure out.
Regards
Aashish Sinha
PS : reward points if helpful

Data records rejected while using Data Manager Packages

Hello all ,
We have configured the dimensions and applications in SAP- BPC 7.5 NW. However , while loading the data into the application using a data manager package , all the records are rejected. The following is the error :
Line 3 :Dimension: P_CC member: SALESTEAM1 is invalid or is a calculated member
Line 3 :Dimension: PRODUCT member: PRODUCTA is invalid or is a calculated member
However , these member are present in the dimensions and are processed as well !! Any help is appreciated .
THanks
Vijay

The message seems to be saying you have a dimension forumula defined for those two cost centers. Please check your dimension members master data and make sure there is nothing defined in a property column called "Formula" for those two members. If there is something populated, then delete the cell contents and save and process your dimension. Then try your data manager load again.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Blank Records added while using Table maintenance generator - SM30

Hi all,
I have created a ztable and view,
For the view table maintenance generator created using sm30,
First time when i add reords, a blank record is added automatically ,how to prevent it,
Also when i try to add invalid data, system throws error , field becomes display only.
How to solve.
Regards
Senthil

Hi Tarun,
Go to the layout and increase the size of the Screen. or at the screen attributes change the length and width values.
You know that initially the screen occupies default size only.
Hope this would serve your purpose.
Cheerz
Ram

How do I stop garageband taking an input from Spotify while using the guitar amps?

Should be able to do it shouldn't i? I just want to use the amps to play along to songs but the Spotify audio is going through the amps too and resulting in distorted music when using gain

Do you have an effect or Amp sim turned on?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

Never used microphone input before, sound recorder window okay, no sound output.

Sound from sound recorder input goes nowhere, a sound window is supposed to open, it does not.
There is some software missing in my pavilion g7 laptop. Media player sound is fine, internet sound
is fine, only sound missing is from the microphone input. The sound recorder window is open and the
recording bar is moving as the input varies, how do I get the sound to the speakers. Never used this
option before, it might be defective from the factory.
This question was solved.
View Solution.

Problem solved. You cannot turn on computer with the microphone or other audio cable plugged in.
Otherwise the computer does not respond to the inputs, you have to plug in the microphone or audio
cable after logging in and then a window will open that allows you to select the that input over the default.

Constantly record and analyze microphone input

Is it possible to analyze microphone input data while it is being recorded? My program needs to measure the input voltage and the program needs to procede when the voltage is equal to 5V.
Thank you.

The sound card can be a bit problematic in this sense especially if you change the input gain for the mic and watch out for any bass boost function being on used as this will affect the scale as well.
As for the scaling on a standard sound card, there is none as such (see article 3 below). The input
is represented as ±32767 on a standard 16 bit card and obviously larger
for the newer 24bit cards.
The easiest option would be to generate a signal, measure it and then play into the mic input. I would suggest that the mic input (or possibly better the line input) would be in the order of a couple of hundred milli volts so if youre sure that you have a five volt signal then you will need to scale the input with a resistor (say a 5K ohm variable resistor set up as a potential divider).
You may find that the following articles will help not only with the principles but with the practice as well: -
http://www.virtins.com/Virtins_Sound_Card_Oscilloscope_Probe_Manual.pdf
http://www.techmind.org/audio/
This link is quite good as well:-
http://www.audioprecision.com/index.php?page=support&id=1100001014
If its a mac the following may apply (I don;t use them a great deal, sorry): -
http://www.channld.com/distspec.html

Microphone doesn't work while recording video

Hi everyone. I have an iPhone 5, and yesterday while trying to make a Vine while using the front-facing/FaceTime camera, I discovered that it didn't pick up any sound. However if I switch to the main camera (the HD one on the back), audio picks up and can be heard. This is a problem when I'm recording regular video too. Microphone works with the back camera, doesn't work with the front. Is there any way to fix this?
Thanks!

My iPhone 4S fails and works exactly the same every time:
FAILS, with the phone on speaker, or with the camera recording video (front or back) no sound is captured.
WORKS, in all other situations and apps that I could think of that use the microphone such as
google, Voice Memo, Dragon Dictation, Vonage Extensions, Skype, and taking the phone OFF speaker holding the phone to my ear. And also select microphone key to voice input instead of typing whenever the keyboard is there (Mail, Notes, Reminders, Safari, Maps, google Maps, ...)
Based on that, my guess is it's not hardware.
I'm using a 4S (64GB) from Verizon. In the nearby Verizon store I was told to back it up, do a master reset (which wipes out the phone), and restore it from the backup. I called Verizon support today before doing this and got exactly the same instructions. That's what I did today and NOTHING GOT BETTER.
After reading several discussion boards I made sure that I was not blocking any of the holes (trying to be thorough). I do not use a cover.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

LSMW for material master using Batch input recording method

Dears,
I am using Batch input recording method to upload material master data. But while selecting views , I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry . That is when I run in foreground system selects only basic data and purchasing views but the plant data views are not selected(palnt data views are selected by scrolling while recording).
How to resolve this issue.
Pls help
Regards
Kamesh

HI,
, I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry
Don,t scroll use Page down button from key Bord
like select Basis view and then press page down button from key board ,then you will get next view now select it
Regards
Kailas Ugale

Internet Explorer stops responding while using CodedUI test builder to record a test

Hi,
Here is my problem description:
Internet explorer (9, 10, 11) stops responding while using CodedUI Test Builder to record a test scenario in IE. I am not able to input any values or click any buttons or perform any action on IE while recording a test on a remote desktop (visual studio
and IE are both on remote machine). Also tried by directly accessing the machine but no luck. The test builder says 'could not record the last action...'
A hand-coded script plays back fine without any problem.
System Details:
OS: Window 7 Professional with SP1 64-bit
Browser: IE 11 (tried with IE 9/10 also with no luck)
Visual Studio 2013 Ultimate Edition
I have tried the following from my past similar experiences.
1. Checked that I am recording on 32 bit IE
2. Tried with IE 9/10/11
3. Reset IE to factory settings
I will appreciate if someone can share some thoughts on the likely problem(s) and any recommended solution.
Regards,
Pankaj

Hi Pankaj,
>>'could not record the last action...'.
Actually it means that the coded UI test builder doesn't record the actions, I met this issue before when my machine is so busy, so I will get this issue if I record the steps so quickly.
I'm not very sure that how you connect to your remote desktop and record the actions, but like the above actions, we have to make sure that the steps were recorded in the Recorded Action window like A.
If not, please delete the steps from the no-recorded steps and re-record them again, maybe you could record the steps slowly.
I doubt that the remote connection impacts the recorded actions performance.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to record video or use screen capture WHILE capturing audio from Logic??

Hi,
I want to record my self playing guitar and singing using my mac book pro built in camera. I want the audio to come from Logic so I can add whatever effects I want to the vocals. When I say audio from Logic I don't mean recording in Logic and adding it in post. I want it to be on the fly.
What I used to do was use the screen capturing program Snapz Pro. I would screen capture a box around photobooth for the video, and then record while having Logic's audio in the background. It screen captures my entire computers audio. So for example if I get an aim message the bleep would show up in the recording. Or if I raise the volume or lower it the little click sound fx would be in it as well.
Capturing the audio this way let me get Logic's audio effects in my video on the fly. It worked out great....until now! :/
I just got the audio interface "Duet 2". And am using a microphone instead of my mbp's built in one. When ever I tried to record and capture my systems audio - my entire computer would crash. Snapz Pro won't work with the system audio with the interface. It works fine without it though.
I then tried to use Quicktime's new movie recording feature. I see it only gives an option for microphone and now system audio. So I got soundflower to re route the audio but that doesn't help either. This is because when you capture this way you can't hear anything while your capturing. So if I were to record a video and wanted Logics audio in it, I would have to set the output to Soundflower first. So when I record I cant hear myself which defeats the purpose.
So my final question is, how can I record video while having Logic's audio? I don't need to record with the mic, because in Logic the mic audio is going thru the system audio with everything else.
I would like to use a process more similiar to Quicktimes straight movie recording instead of doing an odd way like I used to screen capturing a box around the photobooth screen.
Thanks

use Yawcam from Yawcam.com

I want to use my internal microphone to record my voice reading word doc

I want to use my internal microphone to record my voice reading word doc

open garageband, select new project, click on any track (piano,etc,) when the window opens, drop down track and delete the track that is there. Then drop down track and select basic track
go to system prefs>soundselect input, select internal mic, and use the slider for level control.
go to out put and check mute to keep from feeding back.
unclick output mute to lisyen to platback
youcan then burn to disc under share, or send it to Itunes, and burn a disc or put it on a flashdrive

Microphone input recording source while using Steam/Ventr

Similar Messages

Maybe you are looking for