MIcrophone is muted after I enter BF2 (Sound Blaster Audigy

Hello All,?I have a few questions to ask. After I installed the SoundBlaster, everything sounded really good. I would like to ask several questions. )?I tested my hardware through the Control Panel -- Sound - - Voice -- Test Hardware. Everything checked ok? ( my microphone tested fine)? Is there a easier way to test my mic through Creative Lab software??2)? My old sound system was integrated. I disabled the onboard sound, but do I need to uninstall the software and drivers. ( this may be a conflict)?3) When I enter BF2 ( with mic verified good), Battlefield2 has its own ingame Voip. I ask my squad members if they can hear me and they tell me they can't. [color="#ff0033"> I go[color="#ff0000"] back out of the game and find that my mic has been muted. I don't? understand why this happens. Does the software have a system test without going into the control panel? I know SoundMax has a wizard that helps you setup and test your equipment.
I really like what the sound card does for sound and framerates in my games. It has increase my framerates by 20-30 f
ps.
I can hear someone crawling up behind me now.
I would appreciate any help you may have. Thanks,IronSights38

) you play a sound through every input and ouputs. for exemple, testing your mic, you plug a mic, unmuite the mic ouput a talk in your mic. 2) It's always wizest to uninstall everything related to a component before removing it. 3) for me it sound perfectly normal. The game doesn't access control panel. It access the normal and unic mixer setting, shared for every applications. The fact is that if BF2 mute yyour mic is because when you use it in game it MUST be shut down. If not you'll hear yourself in your own speakers. BF2 not restoring the mixer settings after leaving is a BF2 problem, and a common one for many other applications. Programmers forget to save the current mixer settings when launching their app, and then when you leave it has been modified.

Similar Messages

MIcrophone is muted after I enter

Hello All,?I have a few questions to ask. After I installed the SoundBlaster, everything sounded really good. I would like to ask several questions. )

The answer to your st question is :?:smileyvery-happy:?for the muted Mic, it's sounds normal since the normal usage is being able to speak in the mic without hearing yourself.

Microphone on Sound Blaster Audigy Advanced

I have a sound blaster audigy advanced mb integrated junk () and a cheap labtec microphone. Why doesn't my microphone work in CS:S unless while ingame I unplug it then put it back in?

I think it's a software. I just ordered Dell E405 and upgraded to this option. However, the sound card in my laptop is a SigmaTel HD audio. There's no sign of any Creative Soundblaster in my laptop. If you're planning to order a Dell, don't upgrade to this option. Or if you really want to upgrade, make sure you talk to Dell IN DETAIL before you place your order.
GOOD LUCK

Sound Blaster Audigy 2 ZS Microphone H

Ok, I just bought a brand new Microphone, a Sennhesier pc-50 and a brand new sound blaster audigy 2 ZS. When i go to test my mic in a team-speak server of mine, the green button wont light up at all (meaning it wont work). The odd thing is, people in team-speak hear key clicks, my msn beeps, and music that i play, but not my voice. I've tried to switch the wires around while recording myself but it still wont work. I also looked to see if i placed my head phones in the right slot, and the mic in the right slot and it still wont work. The headphones are brand new, and work on another computer. Its just not working on this one. Please help

Hello and welcome to the club. There are tons of use out here.. with the same problem.. Seems we have to sit tight.. they have not let us know a THING about our problem.. Whether or not they are looking into this or otherwise. No one has had the problem solved.. and if someone has and reads this .. LET US KNOW. At the moment, however, I have learned one thing based on this problem: Don't buy any more SB / CL Products!!!

Audio and video skip after installing USB Sound Blaster Audigy 2

Hi community,?Since installing my USB Sound Blaster Audigy 2 NX, audio and video skip when being played with either windows media player, winamp, iTunes, neroshow, winDVD 7, creatives own media players etc. in fact anything I can try, won't work. Games are fine, in fact the sound is brilliant. I'd be really grateful for any feedback on this, not being able to listen to music is driving me crazy. Thanks.

Hello thebro90,I had the same problem.After tryed everything, uninstall, reinstall audio drivers, etc, I finally manage to solved it by updating the CPU drivers... I have a AMD Atlhon X2 4800+Never had the problem again.Best regards.
S?rgio

Microphone Issue - Sound Blaster Audigy 2 ZS Platinum Pro Audio C

Hey there, sorry to post but I've got a little issue which I'm sure is me being stupid but its racking my head so here it comes. I have recently started using talk programs such as vent, skype blah blah to speak to people back home and since moving abroad I have found that now I need the mic to contact these people (which it used to fine before I arri'ved on foreign soil). On clicking on volume control and advance or properties I have nothing in recording for mic and this is where im lost. If I enable the mic on any of the programs people are hearing whatever happens to be coming out of the computer speaks such as games or a movie etc. i've just tried a full removal and reinstallation of the sound drivers for the model in my comp (Sound Blaster Audigy 2 ZS Platinum Pro Audio Card).
All my mates are saying surely you cant lose mic from the volume control but yet its gone and I have no idea how to reactivate it. People seemt o think the card is buggered but it seems fine with everything else I fire out.
Any help on how stupid I'm being would be great.
Thanks in advance.

Hi Joko,
Please check your private message.

Help with an Older Sound Blaster Audigy Card! Computer freezing on driver upda

Hey everyone,
I'm new to these forums and dont know if anyone still has experience with the older cards.
I've had a Sound Blaster Audigy 2 Platinum for about 6 years now and noticed some popping and sometimes the card began to emit a high pitched whining sound. Thus I decided to install the newest drivers (can't hurt can it's)
However, when I finished installing the drivers, my system refuses to start. Sometimes it's at the Windows login screen, sometimes right after.
I finally got something that may be the reason why my system is hanging. I have a message that pops up that says:
Box Name: ReadReg Application :Version 6.0..36
Message: Completing installation of your audio card
??? Please wait.
My computer is now frozen.
Here are my system specs if it helps
P4 2.66Ghz
ASUS P4S800D-X
PNY 6800GT
SB Audigy 2 Platinum
GB Corsair XMS3200C2PT (2x52MB)
Windows XP Pro
DVD+/-RW DL
DVD ROM
After I did a system restore, the sound driver was missing. Said Creative Audigy in the driver section with the yellow exclamation mark. I installed the new drivers again with the same problem.
Any help is welcome!? Thank you for your time and consideration.
Message Edited by Bane99 on 2-02-2008 07:00 PMMessage Edited by Bane99 on 2-02-2008 07:0 PM

I would:
Pull the sound card.
Start up.Enter the BIOS setup utility to make sure your MB recognizes the change.
Save the BIOS
Start again.
If Windows works.
Run a thorough virus scan (I hope you're running some reputable anti-virus software!!!)
Install Service Pack 3.
Re-install the sound card..
I'll bet Windows finds a driver for it that works. If not, run Windows update manual and see if there's a driver update for the card.
If none of the above helps, well... I confess, I reinstall Windows at the drop of a hat and that usually solves all problems. Do it on a Sunday so you can watch football while Windows churns.
Power Quest Dri've image has saved me from the Windows install horror on many occasions. I think Symantec has pulled the program but there must be something similar out there. Buy it. And in the future, remember, if it ain't broke, don't fix it!
Good luck.

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Pin Specifications for Creative Sound Blaster Audigy SB1394

;Pin Specifications for Creative Sound Blaster Audigy SB394 I have a Sound Blaster Audigy SB934 CA000-IAF Creative Tech '0 AA299J basically a Sound Blaster Audigy Platinum (wiouth the front bay for conectivity.)? And since I dont' have the front bay for heaphone and mic conectivity I was wondering if there is a spec sheet for the 40-Pin conectivity that is used for the front bay. I was wondering if anyone could provide me with such spec sheet so that I can try to conect my frontal Intel board plugs for headphone and microphone (would like to use my headset.)
There are a lot of pins on the card and well only about 8 in the conector for the front plugs. So if any dev from the forum is reading this I would greatly apreciate it if I could use my front Intel sound plugs on this old model card.
Thank you for all your help.

http://www.driverheaven.net/audio-general-technical-discussion/5279-creative-audigy-2-ad_ext-pin-assignment.html
That will help you with the pin assignments.......
And you can also try one of these to connect a lot more easily to your front panel audio jacks.......
www.x-tap.com
I used the above with four Audigy LS and SE's and it works a treat!

Sound Blaster Audigy, DR release 2.8.4 failed just like that

Hi, I have a big problem, last Saturday someone has used my computer he did nothing all too strange he only downloaded some files and had an audioconversation on his MSN-account. But to my astonishment the sound disappeared. I have tried everything in my ability on my knowledge of computers and this site. I have checked every configuration and all. I have re-installed and updated everything but nothing works, does anybody have an idea what I can do?
Sound Blaster Audigy, DR release 2.8.4Date: Agust 8th 2005
Program version: 5.2.8.64
Application instance id: PCI\VEN_02&DEV_0004&SUBSYS_005A02&REV_03\3&6AAA0&0 &60
Windows XP Professional 2002 version service pack 2
Need more info? let me know!

go online to http://support.creative.com/Products...Audigy+2+Value?go to the bottom of page and click auto update and up date all your drivers.
Or go to your start menu click on settings, click open control panel, your system file click it open, click open Device manager, in device manager scrool down till you find sound,video game controllers double click that open, go down till you find the name of your sound card right click on that, click on properties a window will open up with a bunch of tabs at the top find the driver tab click it open find where it says update driver click that and let it do its thing? after done restart your computer good luck!

Need Help On Sound Blaster Audigy Va

hi!
i wanted to buy sound blaster audigy value but in its system requirements it says that the PCI has to be 2. compliant or higher i have P3 D85eea2 baord does my boards PCI are 2. compiant.
Please reply back soon cause i need to buy that card soon.

najam wrote:
hi!
i wanted to buy sound blaster audigy value but in its system requirements it says that the PCI has to be 2. compliant or higher i have P3 D85eea2 baord does my boards PCI are 2. compiant.
Please reply back soon cause i need to buy that card soon.
You can find all this information written in motherboard's manual (if you don't have one then normally you can DL the manual from motherboard manufacturers support pages).
Also, you'll propably can find this information by googling quite easy too (search after reviews of your motherboard model/pc model (if PC is factory build model)).
jutapa

Sound Blaster Audigy

Hello,
I have brought this Sound Blaster Audigy sometime ago and it makes a screaming horrible noise when i try and talk on ventrilo.
I have uninstalled multiple times, installed drivers, iv done everything i can possibly think of. the current driver is 5.2..608 and it says the Driver date is 20/03/2006.
I took some screenshots of the setup.
[IMG"]http://i20.photobucket.com/albums/b23/CallumPirie/untitled2-.jpg[/IMG]
[IMG"]http://i20.photobucket.com/albums/b23/CallumPirie/untitled-3.jpg[/IMG]
any help would be great?

After you reformatted your hard dri've did you install the chipset driver? What OC, XP, Vista?
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

"Sound Blaster Audigy Fx" and stereo mix availability

If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
does this card work on windows 8?
http://www.bestbuy.com/site/creative...&skuId=3287009

Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
I'm am getting sound out of my card.
When I right click on the "speaker" icon in the task bar I see the following list of 5 options
Volume Mixer
Playback Devices
Recording Devices
Sounds
Volume Control Options
However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
Something is definitely going on but I can't seem to track down the cause.

Setup could not detect any Sound Blaster Audigy card on your system

Hi from Barcelona!
I've a Soun Blaster Audigy card (Model: SB0090)
I tried to install the Audigy software and drivers from the original product CD but Setup was unable to find Augigy hardware and halted the installation!
"Setup could not detect any Sound Blaster card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this Setup program"
By the way. Manually the sound drivers can be installed working only front speakers of the 5. Creative system
I tried a clean installation of Windows XP and Windows 2000 PRO (reformatted the hard dri've) but Audigy install CD still could not find Audigy hardware.
I've changed the card to a different PCI slot with the same results!!! Damaged?
What is happening? I need a solution!! Many users have this problem to with other Sound Blaster cards and models...

ADSLNEW wrote:
It seems to be an important BUG of Creative Sound Blaster Audigy cards related with EEPROM!!!
Yes, indeed, that is my theory as well. After much ****hing and on-line research, it seems that this problem has been around since 2002. From Creative Labs point of view, it appears they view this as "pilot error" -- the user has installed the card in a system that is not fully compliant with the latest standards -- specifically Microsofts ACPI (configuration and power management). A wide variety of configurations and/or actions seem to cause the PCI subsystem ID in the Audigy EEPROM to be erroneously overwritten -- including certain older motherboards, certain older PCI cards, and perhaps other actions.
Once the subsystem ID in the EEPROM is overwritten and has garbage information, many or all of the Creative applications cease working and various sound problems can arise. Attempts to reinstall the driver or update to the latest driver consistently fail becuase of the dreaded "Setup could not detect any Sound Blaster Audigy card in your system..." error message.
There appear to be four fixes:
) Get a replacement Audigy card from Creative, but <EM>only</EM> after you perform their prescribed troubleshooting steps to prove that the card is indeed the source of the problem. Apparently, the steps include installing the card in another PC. Apparently, Creative in Europe is more willing to replace your card than Creative in the US. It's up to Creative Labs whether or not they issue you an RMA ("Return Material Authorization").
However, this fix will fail if the root causes of the EEPROM error are not corrected. Apparently, Creative Tech Support isn't always a foolproof source of guidance, so the burden is on you. The root cause MUST be corrected before the new card is installed, or the same problem will happen all over again. Eliminating the root cause may involve replacing your motherboard, replacing other PCI cards, or manual configuration (disabling ACPI).
2) Reprogramming the EEPROM. This is for advanced PC owners only, because it involves desoldering the EEPROM, programming it, and resoldering (and even lifting some pins to prevent reprogramming). There are instructions on how to do this posted in the German Creative Labs discussion board, by a Russian (!). I have links for those who are interested.
3) Removing the Creative drivers and software (using Clean Sweep procedures and third party utilities), updating again using Windows XP SP2, then physically moving the card to different PCI slots (multiple times if necessary), until ACPI Bios writes the proper information into the EEPROM. You can then reload the drivers.
Again, the root causes of the problem must be removed or your fix will only be temporary (a day or two). This solution also seems to be very dependent on the specifics of your system (motherboard, PCI cards, etc.).
4) Some people have had success in by-passing the step in the driver installation process where they check for the Audigy card subsystem ID, using a utility called CTZAPxx on the installation CD. Then then manually install each of the applications they need to use.
5) Use the open source driver from the kX Project (http://kxproject.lugosoft.com/index.php). This driver (and associated utilities) does not depend on the detailed configuration of the card (i.e. they don't check subsystem ID) and appear to work fine even with cards with corrupted EEPROM.
This driver is aimed primarily at computer music applications, and opens up the on-card signal processing capabilities. The downside is that the Audigy 2 ZS does not have all of it's capabilities supported <EM>yet </EM>(e.g. Dolby Digital decoding, S/PIF passthrough, possibly some game sound features, THX, 24-bit recording, support for Hyperthreading CPUs, etc.). But scanning over the discussion boards, the user community seems to be MUCH happier with the performance and support associated with these drivers than with Creative's.
This is the direction I'm going. I'm not a big gamer and I don't really care about the latest in home theater audio performance. Basic 5. surround sound is all I care about, and I'm much more interested in computer music capabilities.
I have also lost faith in Creative Labs as a vendor to provide the support I want and need going forward. Just imagine if the Creative Labs were running the Space Shuttle program :smileysurprised:.

MIcrophone is muted after I enter BF2 (Sound Blaster Audigy

Similar Messages

Maybe you are looking for