Microphone is no longer recording -- help nee

Hello. I have a Sound Blaster Li've! 24-bit sound card. I used to be able to record with my microphone which is hooked up to a pre-amplifier which is hooked up to the sound card's recording port on the back of my PC. Then, in the summer, I wasnt able to record anymore. I updated all the drivers, and reinstalled the sound card and neither fixed it. Therefore, I assumed that my problem was that maybe the preamp, the cables, and/or microphone weren't working. So I bought entirely new equipment for everything, and it still doesn't record!!! I looked at the FAQ in this forum and I followed everything, and tried some of the suggestions multiple times and it still does not record. I also did a search on the forums and seems like other people's similar problems were not resolved. I can't hear any of the microphone output through my headphones either. My sound card is working fine otherwise.
One strange thing that I noticed is that I CAN hear my microphone output for about three seconds every time i reinstall/update the drivers for the Sound Blaster Li've! sound card This occurs DURING the update. Im wondering if there is another program that is possibly blocking the recording or if something is corrupting certain driver(s)? Would there be anyway to check this? Is there something else that could be wrong?
Is there anyway to fix the problem without having to repartition my hard dri've? :help:

bump

Similar Messages

  • HT201066 How can I split a long recording audio file into multiple audio files?

    Hi,
    How can I split a long recording audio file into multiple audio files?
    With Windows I was using Nero software, which is not available for Mac. Is there any similar app for free for Mac?
    Thanks!

    Hello ingiorgio
    You can import the track into GarageBand and then split the tracks there. Once that it is done you can highlight the ruler section and then share the song to iTunes to get them separated out. 
    GarageBand - Split regions in the Tracks area
    http://help.apple.com/garageband/mac/10.0/#gbnd76fcce04
    GarageBand - Share songs to iTunes
    http://help.apple.com/garageband/mac/10.0/#gbndfb96a96f
    Regards,
    -Norm G.

  • I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I live in South Africa, and I had the same problem with my iPhone 4.
    After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
    ***** that i cant use Find my iPhone, but atleast i can use my phone.

  • My CD player/recorder is no longer recording MP3's

    my CD player/recorder is no longer recording MP3's. I get no warning messages, just when I place the CD into the drive and open Windows Media Player, it's reporting that it cannot record some or all of the CD. I select one of the available tracks at a time and attempt to record, but get the error message with every track.

    Hi,
    Please clarify: Do you want to RECORD or do you want to RIP the CD ? WMP can RIP musics CD's (not fully protected) to MP3 files, but RECORD from a CD ? Sorry, I don't know.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I cant open any websites in firefox(version 25) ,its loading long time ,help plz

    i cant open any websites in firefox(version 25) ,its loading long time ,help plz

    hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions: [[Fix problems connecting to websites after updating Firefox]]

  • ORA-06502 error with external table having long records

    I'm getting a strange error with the oci driver that I don't get with the thin driver.
    The basic situation is that we using external tables and both the oci and thin drivers have been working until we tested with a table that had longer records than the previous tables. The new table has 1800 byte records.
    The thin driver still works fine with the new table. However, the oci driver generates the following error with the new table:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    I suspect that with oci driver the oci DLLs are reading the external file and the DLLs can't handle the longer record length.
    Particulars
    - Oracle DB Server is 10.2.0.1 on SunOS 5.9
    - OCI Instant Client instantclient_10_2 on Windows XP
    - OCI client code from DB server installation running on DB server
    - Works with thin driver from Windows XP and on DB server machine for all record lengths
    - Works with both OCI drivers for records < 1800 bytes (don't know actual limit)
    - Fails with both OCI drivers for records = 1800 bytes.
    Does anyone out there have any thoughts.
    Thanks in advance.

    Your access parameters are in the wrong order. External tables are a bit fussy like that. Refer to the access_parameters section in the Utilities manual and follow the order there. From memory it will go something like this:
    RECORDS DELIMITED...
    LOG/BAD/DISCARDFILE...
    FIELDS TERMINATED...LDRTRIM
    MISSING FIELD VALUES...
       fields...
    )Regards...

  • Since downloading ios 7, the microphone function no longer works.

    Since downloading Ios 7, the microphone function no longer works even though it is enabled in settings.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Spanned Long-Recording HDV .m2t video files do not join properly on Import (PPro cs6, Sony z5+Mrc1k)

    I have a problem seamlessly joining Sony HDV video files recorded with sony z5 camera and mrc1k recording unit containing spanned clips of long-duration recordings.  this is a copy of my bug report.  If you have any information, please contribute to this thread.  Have other users seen similar problems?
      Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number of Processors:          2
      Total Number of Cores:          8
      L2 Cache (per Core):          256 KB
      L3 Cache (per Processor):          12 MB
      Memory:          8 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          MP51.007F.B03
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11
    ATI Radeon HD 5770:
      Chipset Model:          ATI Radeon HD 5770
      Type:          GPU
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x68b8
      Revision ID:          0x0000
      ROM Revision:          113-C0160C-155
      EFI Driver Version:          01.00.436
    Steps to reproduce bug:
    1. Record long video clips on mrc1k recording unit cf card so that clips will be split into multiple sections due to fat32 filesystem.
    2. Clone disk image of card on to computer's backup hard drive using Disk Utility.
    3. Copy contents of card image on to editing drive array.
    4. navigate to folder containing media using premiere pro media browser, card is recognized as "Sony HDV".  Single recording is represented by multiple clips of about 21:42:28 in length.
    5. Import media, wait for indexing and conforming to complete.
    Results: Video clips are shown as separate video files.  Upon importing these multiple files and arranging them in a timeline, there are one-frame audio dropouts between gaps in the files.  This is unacceptable for long-form non-repeatable event shooting.
    Expected results: The video files should be recognized in the media browser as a single spanned clip with no audio dropouts in-between file gaps.  I should be able to drop these clips into my timeline with no degradations.
    Here at Cornell University we have been using our z5 camera to shoot non-repeatable events with long-recording times (Usually lectures, seminars, long-winded academic speeches).  We had previously been able to use final cut pro to ingest our media, but are switching to premiere pro in an attempt to simplify our workflow.  Alas, I still have to use final cut pro or clipwrap to fix the problem with our media.  If you have any guidance, please contact me at [email protected].  Thank you!

    As far as I know, the only way to consolidate long MRC1 clips without dropped frames at the join points and without going through FCP is to use the Sony RU_UTIL Windows program. Maybe there is a 3rd-party OSX app - I have never encountered one.
    My file workflow right now is an absolute mess as I transition to tapeless and am adding DSLR's to the mix. A single point of ingestion for all assets - video, stills, and audio - as well a single catalog for easily locating any of these does not seem to exist. I've tried Bridge, Prelude, and PPro Media browser with little success. It may be strange, but Lightroom is currently my best solution for importing and cataloging videos (and stills). It allows me to keyword and rate and organize and locate videos and stills across my system. It doesn't interface to PPro, but at least I can easily find whatever I'm looking for. I know I'm going way off-topic here and I'm sure your needs are different than mine, but the ideal workflow for me would be for Lightroom to be able to export assets to a PPro Project and also for Lightroom to manage audio files. Maybe someday. 

  • My video no longer records sound

    When I first got it, it did record sound
    but when I first hooked it up to my iTunes and got my contacts, etc, on it.. it no longer records sound when I take video...

    just like 99% of all problems with this phone i would try a reset. it seems to be apples answer to everything anyway. heck i could work for apple...my answer to everything would be JUST DO A RESET. now gimme me my money

  • I have a new logic board and fce is asking for my serial number from packaging , which has long gone- help?

    final cut express
    I have a new logic board and fce is asking for my serial number from packaging , which has long gone- help?

    Without the serial number your FCE disc is useless and nobody here can help.
    Your only chance, if you have the receipt or can prove your purchase is to contact Apple and hope they may be able to help.

  • Updated and can no longer record video

    I updated to iOS4 on my 3Gs and I can no longer record video, the option to switch to video is no longer there. Is anyone else having this problem?

    Thanks for the suggestion; unfortunately, such attempts are unsuccessful. In fact, I've been experiencing this bug for quite a while (as a developer), despite several restores. From my research, there are serious issues with iOS 4.0 and the iPhone Camera app. I've submitted a bug report for this. We'll see what comes of that.

  • Recording help needed

    recording help needed. I'm a beginner, imac, logic express and helix board 12 firewire.
    I have recorded my daughter voice only ok, BUT when i import audio file to track 1 as backing track and my daughter is using headphones from the helixboard to sing to she does not record to track 2 when all in enabled.
    Should her headphone come from the imac and not the helix board
    Regards
    Paul

    Check the recording channel in the channel strip.
    It must be set the same as the audio interface channel.
    cheers
    rob

  • A few weeks ago I cleared the history in safari.  Since that time it no longer records any new history and the "clear history" tab looks to be frozen.  Have tried shutting down, nothing helps.  Advice please.

    A few weeks ago I cleared the history on my iPad.  Since then it has not recorded any new history and the "clear history" tab looks like it is frozen in place.  I have shut down the iPad several times, checked to make sure I have the latest update and read everything I can find about history.  It tells me how to clear history but there is nothing that addresses what to do if it doesn't record history since the last time it was cleared.  Can someone help me please?  Thank you.

    - Resset the iPad. Nothing is lost
    Reset iPad: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Do you have Private Browings turned on in Settings>Safari?

  • Can anyone help as I can no longer record classical music video after Mountain Lion upgrade?

    Hi,
    Before my upgrade from Snow Leopard to Mountain Lion,I could record video from Medici tv     using Jaksta  with no problems.
    Since Mountain Lion, I can still record  with Jaksta - but when played back on iTunes the recordings break up and are unwatchable.
    Any ideas and possible solutions gratefully received
    Les
    3.06 GHz Intel Core 2 Duo
    4 GB 1067 MHz RAM

    O.K  I have worked out how to fix it.I first went back to Medici tv where  I read ''  Software requirements are
    Flash Player version 11 recommended ".So I have installed that.The point about that is-I presume- that I must
    have  had it there when using Medici successfully in Snow Leopard.So it looks like  FP must have been
    uninstalled by me in error at some time !! D'oh!
    Then I found that FP uses  RTMP and( I think HTTP )  protocols.In Jaksta preferences I had been previously
      advised to uncheck " Always record HTTP and RTMP streams ".Having now   rechecked those options, my
    ability to record from Medici is  restored.
       However this all happened ,I'm up and running again.
    Thanks for your interest varjak paw ,much appreciated.
    Les

  • Microphone / Audio no longer works on my HP Pavilion DV7 Notebook PC

    My microphone no longer works on my system.  Everything appears ok.  Got a message in the action center that says:
    AMD/ATI Video Driver has stopped working properly.  Help, I need to record some videos.  Thanks
    Rob

    Hello rob4kelly,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that the microphone no longer works on your notebook, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your notebook computer?
    What version of Windows do you have installed on your computer?
    Has your computer completed all of its important Windows Updates?
    Have you updated your HP drivers using the HP Support Assistant?
    Is this an on-going, or recent issue?
    In the meantime, I recommend following this document on Using System File Checker to Restore System Files. This should help repair damaged protected files on your computer. In addition, I also suggest following this resource on Resolving Microphone and Line-in Problems (Windows 7). 
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for

  • How can i create forward and back buttons for a dreamweaver slideshow?

    Hi I am an illustrator attempting to create a website in dreamweaver (basically it will be an online portfolio). I would like to have a box/slideshow with images of my work that someone can browse through by clicking 'next' and 'back' buttons. Does a

  • Manual Correction to Raw material/ Inventory a/c

    Guys, When we did  our  initial stock load at the time of implementing sap ECC6.0 .That load went into dummy profit center and  now thousnads of entries with material assignment sitting in dummy.and offset is in initial stock upload a/c , Now we want

  • Serial Numbers in WM Storage Units

    Hi all: My client needs to manage serial numbers in WM. I am planning to propose to use the storage unit as storage for serial numbers. This WM will not have HUM, no batch management. Plant will use valution type. Can anyone tell me what are the pros

  • N8 contacts update from Facebook

    I have a number of my contacts linked to their facebook profile, this was done from within the contact so I think before belle maybe? I've noticed that the profile pictures aren't updating, what's going on? Looking in the social app they're still lin

  • Numeric Overflow; nested exception is java.sql.SQLException: Numeric Overfl

    Dear Team, We are getting below errors in java, SQL state [99999]; error code [17026]; Numeric Overflow; nested exception is java.sql.SQLException: Numeric Overflow java.sql.SQLException: Numeric Overflow at oracle.jdbc.driver.NumberCommonAccessor.th