Microphone is not working on my iMac early 2008. Any ideas?

I have been trying to make this thing work and couldn't. Is it a hardware or software problem? anyone knows?

How is it not working?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

Similar Messages

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
Any ideas on how to correct this?
Thanks-Vitaleyes

I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset. My Blueant T1 does support it and plays the music through the deadset.

Microphone is not working on my iMac 21.5-inch, Mid 2011

I have gone through System Preferences and clicked on Sound. Once there, I have gone to input and adjusted. No changes. I also did shut it down and start up while pushing command, option, P, R at the same time. No change. I also Created another Log In account and th microphone was not working there either. Please help me resolve this.

Here are a couple of additional suggestions, but after these I unfortunately have run out of suggestions for you.
Are you using one of the current Apple USB or wireless Apple keyboards? If you are using an older Apple or a 3rd party keyboard then it's possible your system is not recognizing the key presses required to run AHT.
Another way to verify the USB ports on your iMac is to use the built in 'System Profiler' feature of Mac OS X. First, plug in a USB device to the suspect USB port, then pull down the Apple menu and select 'About this Mac'. When the 'About this Mac' window opens click on the 'More Info...' button, then click on the 'System Report...' button. Once the system profiler window open click on 'USB' in the Hardware column on the left side to display your USB device tree. You should see a list of all the USB devices that are attached to your system including the FaceTime camera, SD card reader, and your Bluetooth card that are inside your iMac. Do you see the device attached into the suspect USB port? If you move the device to another USB port you can press the command-R keys to refresh the device tree list. If the known good device doesn't show up when it is connected to the suspect port then you have confirmed that you have an issue with that port. Even if you choose not to take your system in for service I still recommend contacting Apple so that you can create a case to document the issue in case you want to fix it at a later date.

External isight not working with Macbook Pro early 2008

My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
Unfortunately, I have no other firewire device to check the port.
Any ideas, dear community?

Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage. (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.)
You have tried several good things and may be finding that your old iSight needs work.
Here are the alternatives I can offer. Consider any you have not tried in any order you like:
(1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
Test in more than one user account and with more than one Apple softwre application.
(2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
(3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
(4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
(5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
Message was edited by: EZ Jim

IPad 2 3G 64 mic not working from factory, do you have any idea ?

Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem .

Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem .

Submit buttons not working....:o( - ANY IDEAS??

okay i got a form - ApplicantForm.jsp and that has two buttons on it...
'ACCEPT' and 'REJECT'
the next page - CurrentStatus.jsp - should be brought up but its just not working!
whenever a button is pressed a blank screen with just the buttons is being brought up and no changes are being made to the database.
what needs to happen is that it performs the little calculation - and the updates the value in the database...here's the code
ApplicantForm.jsp
(the buttons are declared at the top and the logic at the bottom)
<%@ page import="java.sql.*, java.net.*" %>
<HTML>
<HEAD>
<TITLE>APPLICANT FORM</TITLE>
</HEAD>
<BODY BGCOLOR="#FFFFFF" TEXT="#000000">
<FORM NAME = "ApplicantForm">
<DIV ALIGN = "center">
<INPUT TYPE = "submit" VALUE = "ACCEPT" NAME = "AcceptButton">
<INPUT TYPE = "submit" VALUE = "REJECT" NAME = "RejectButton">
</DIV>
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:fypproject","","");
Statement st = con.createStatement();
String forename           = request.getParameter("name");
String surname           = request.getParameter("surname");
String email = request.getParameter("email");
int level = 0;
String query = "SELECT * FROM Login_Details LD, Personal_Details PD, Education E, Work_Experience WE, Skills S WHERE LD.Email_Address = PD.Email_Address AND LD.Email_Address = E.Email_Address AND LD.Email_Address = WE.Email_Address AND LD.Email_Address = S.Email_Address AND PD.Forename = '" + forename + "' AND PD.Surname = '" + surname + "' AND LD.Email_Address = '" + email + "'";
ResultSet rs = st.executeQuery(query);
if(rs.next()) {
%>
<TABLE WIDTH="760" BORDER="0" CELLSPACING="0" CELLPADDING="0">
<TR VALIGN="top">
<TD WIDTH="610" HEIGHT="130">
<TABLE WIDTH="610" BORDER="0" CELLSPACING="0" CELLPADDING="0">
<TR>
<TD WIDTH="10" HEIGHT="192" VALIGN="top"></TD>
<TD WIDTH="600" HEIGHT="192" VALIGN="top">
<TABLE WIDTH="600" BORDER="0" CELLSPACING="0" CELLPADDING="0">
<TR>
<TD VALIGN="top">
<TABLE WIDTH="100%" BORDER="0" CELLSPACING="0" CELLPADDING="4">
          <TR>
          <TD COLSPAN="2"> </TD>
          </TR>
<TR>
<TD COLSPAN="2"><B> <% out.println(rs.getString("Forename")); out.println(rs.getString("Surname")); %></B></TD>
</TR>
<TR>
<TD COLSPAN="2" BGCOLOR="#000000"><FONT COLOR="#FFFFFF" SIZE="4">Personal Details</FONT></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="250"><FONT SIZE="2">Title</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Title")); %></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="250"><FONT SIZE="2">Forename</FONT></TD>
<TD WIDTH="334"><% out.println(forename); %></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="250"><FONT SIZE="2">Surname</FONT></TD>
<TD WIDTH="334"><% out.println(surname); %></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="250" HEIGHT="2"><FONT SIZE="2">Date Of Birth</FONT></TD>
<TD HEIGHT="2" WIDTH="334"><% out.println(rs.getString("DOB")); %></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="250"><FONT SIZE="2">Sex</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Gender")); %></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="250"><FONT SIZE="2">Nationality</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Nationality")); %></TD>
</TR>
          <TR BGCOLOR="#FFFFFF">
          <TD WIDTH="205"><FONT SIZE="2">Marital Status</FONT></TD>
          <TD WIDTH="334"><% out.println(rs.getString("Marital_Status")); %></TD>
          </TR>
          <TR BGCOLOR="#FFFFFF">
          <TD WIDTH="205"><FONT SIZE="2">Do you require a work permit?</FONT></TD>
          <TD WIDTH="334"><% out.println(rs.getString("Work_Permit_Required")); %></TD>
          </TR>
          <TR BGCOLOR="#FFFFFF">
          <TD WIDTH="205"><FONT SIZE="2">Email Address</FONT></TD>
          <TD WIDTH="334"><% out.println(email); %></TD>
          </TR>
<TR>
<TD COLSPAN="2" BGCOLOR="#000000"><FONT COLOR="#FFFFFF" SIZE="4">Education</FONT></TD>
</TR>
          <TR>
          <TD COLSPAN="2"><FONT SIZE="2">Secondary Education</FONT></TD>
          </TR>
<TR>
<TD COLSPAN="2"><FONT SIZE="2">Institution(s)</FONT></TD>
</TR>
<TR>
<TD COLSPAN="2">
<TABLE WIDTH="100%" BORDER="0" CELLSPACING="0" CELLPADDING="4">
<TR>
<TD WIDTH="47%"><FONT SIZE="2">Name</FONT></TD>
<TD WIDTH="37%"><FONT SIZE="2">Location</FONT></TD>
<TD WIDTH="7%"><FONT SIZE="2">From</FONT></TD>
<TD WIDTH="9%"><FONT SIZE="2">To</FONT></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="32%"><% out.println(rs.getString("Institution_Name_1")); %></TD>
<TD WIDTH="32%"><% out.println(rs.getString("Institution_Location_1")); %></TD>
<TD WIDTH="13%"><% out.println(rs.getString("Institution_From_1")); %></TD>
<TD WIDTH="23%"><% out.println(rs.getString("Institution_To_1")); %></TD>
</TR>
<TR BGCOLOR="#FFFFFF">
<TD WIDTH="32%"><% out.println(rs.getString("Institution_Name_2")); %></TD>
<TD WIDTH="32%"><% out.println(rs.getString("Institution_Location_2")); %></TD>
<TD WIDTH="13%"><% out.println(rs.getString("Institution_From_2")); %></TD>
<TD WIDTH="23%"><% out.println(rs.getString("Institution_To_2")); %></TD>
</TR>
</TABLE>
</TD>
</TR>
<TR>
<TD COLSPAN="2"><FONT SIZE="2">'A' Level or Equivalent</FONT></TD>
</TR>
<TR>
<TD COLSPAN="2" VALIGN="top">
<TABLE BORDER="0" CELLSPACING="0" CELLPADDING="4" WIDTH="607">
<TR>
<TD WIDTH="18"> </TD>
<TD WIDTH="57"><FONT SIZE="2">Year</FONT></TD>
<TD WIDTH="250"><FONT SIZE="2">Qualification Name</FONT></TD>
<TD WIDTH="96"><FONT SIZE="2">Subject</FONT></TD>
<TD WIDTH="131"><FONT SIZE="2">Grade</FONT></TD>
</TR>
<TR>
<TD WIDTH="18">1</TD>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("ALevel_Year_1")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("ALevel_Name_1")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="96"><% out.println(rs.getString("ALevel_Subject_1")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="131"><% out.println(rs.getString("ALevel_Grade_1")); %></TD>
</TR>
<TR>
<TD WIDTH="18">2</TD>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("ALevel_Year_2")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("ALevel_Name_2")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="96"><% out.println(rs.getString("ALevel_Subject_2")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="131"><% out.println(rs.getString("ALevel_Grade_2")); %></TD>
</TR>
               <TR>
<TD WIDTH="18">3</TD>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("ALevel_Year_3")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("ALevel_Name_3")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="96"><% out.println(rs.getString("ALevel_Subject_3")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="131"><% out.println(rs.getString("ALevel_Grade_3")); %></TD>
</TR>
               <TR>
<TD WIDTH="18">4</TD>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("ALevel_Year_4")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("ALevel_Name_4")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="96"><% out.println(rs.getString("ALevel_Subject_4")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="131"><% out.println(rs.getString("ALevel_Grade_4")); %></TD>
</TR>
               <TR>
<TD WIDTH="18">5</TD>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("ALevel_Year_5")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("ALevel_Name_5")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="96"><% out.println(rs.getString("ALevel_Subject_5")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="131"><% out.println(rs.getString("ALevel_Grade_5")); %></TD>
</TR>
</TABLE>
</TD>
</TR>
<TR>
          <TD COLSPAN="2"><FONT SIZE="2">Higher & PostGraduate</FONT></TD>
          </TR>
<TR>
<TD COLSPAN="2"><% out.println(rs.getString("Degree_Year_1")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Degree Qualification</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_Qualification_1")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Degree Subject</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_Subject_1")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Degree Result</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_Result_1")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Expected / Obtained</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_ExpObt_1")); %></TD>
</TR>
          <TR>
<TD COLSPAN="2"><% out.println(rs.getString("Degree_Year_2")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Degree Qualification</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_Qualification_2")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Degree Subject</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_Subject_2")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Degree Result</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_Result_2")); %></TD>
</TR>
<TR>
<TD WIDTH="250"><FONT SIZE="2">Expected / Obtained</FONT></TD>
<TD WIDTH="334"><% out.println(rs.getString("Degree_ExpObt_2")); %></TD>
</TR>
<TR>
<TD COLSPAN="2" BGCOLOR="#000000"><FONT COLOR="#FFFFFF" SIZE="4">Work Experience</FONT></TD>
</TR>
<TR>
<TD COLSPAN="2"><FONT SIZE="2">Employer 1</FONT></TD>
</TR>
<TR>
<TD COLSPAN="2" BGCOLOR="#FFFFFF" VALIGN="top">
<TABLE WIDTH="100%" BORDER="0" CELLSPACING="0" CELLPADDING="4">
<TR>
<TD WIDTH="30%"><FONT SIZE="2">Employer</FONT></TD>
<TD COLSPAN="2"><% out.println(rs.getString("Employer_Name_1")); %></TD>
</TR>
<TR>
<TD WIDTH="30%"><FONT SIZE="2">Dates</FONT></TD>
<TD WIDTH="17%"><FONT SIZE="2">From</FONT></TD>
<TD WIDTH="53%"><% out.println(rs.getString("Start_Date_1")); %></TD>
</TR>
<TR>
<TD WIDTH="30%"> </TD>
<TD WIDTH="17%">To</TD>
<TD WIDTH="53%"><% out.println(rs.getString("End_Date_1")); %></TD>
</TR>
<TR>
<TD WIDTH="30%"><FONT SIZE="2">Role</FONT></TD>
<TD COLSPAN="2"><% out.println(rs.getString("Role_1")); %></TD>
</TR>
</TABLE>
</TD>
</TR>
<TR>
<TD COLSPAN="2"><FONT SIZE="2">Employer 2</FONT></TD>
</TR>
<TR>
<TD COLSPAN="2" BGCOLOR="#FFFFFF" VALIGN="top">
<TABLE WIDTH="100%" BORDER="0" CELLSPACING="0" CELLPADDING="4">
<TR>
<TD WIDTH="30%"><FONT SIZE="2">Employer</FONT></TD>
<TD COLSPAN="2"><% out.println(rs.getString("Employer_Name_2")); %></TD>
</TR>
<TR>
<TD WIDTH="30%"><FONT SIZE="2">Dates</FONT></TD>
<TD WIDTH="17%"><FONT SIZE="2">From</FONT></TD>
<TD WIDTH="53%"><% out.println(rs.getString("Start_Date_2")); %></TD>
</TR>
<TR>
<TD WIDTH="30%"> </TD>
<TD WIDTH="17%">To</TD>
<TD WIDTH="53%"><% out.println(rs.getString("End_Date_2")); %></TD>
</TR>
<TR>
<TD WIDTH="30%"><FONT SIZE="2">Role</FONT></TD>
<TD COLSPAN="2"><% out.println(rs.getString("Role_2")); %></TD>
</TR>
</TABLE>
</TD>
</TR>
          <TR>
<TD COLSPAN="2" BGCOLOR="#000000"><FONT COLOR="#FFFFFF" SIZE="4">Other Skills</FONT></TD>
</TR>
     <TR>
<TD COLSPAN="2" VALIGN="top">
<TABLE BORDER="0" CELLSPACING="0" CELLPADDING="4" WIDTH="807">
<TR>
               <TD COLSPAN="2"><FONT SIZE="2">Foreign Languages</FONT></TD>
               </TR>
               <TR>
<TD WIDTH="57"><FONT SIZE="2">Language</FONT></TD>
<TD WIDTH="250"><FONT SIZE="2">Proficiency</FONT></TD>
</TR>
<TR>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("Language_1")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("Language_Prof_1")); %></TD>
</TR>
                              <TR>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("Language_2")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("Language_Prof_2")); %></TD>
</TR>
                              <TR>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("Language_3")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("Language_Prof_3")); %></TD>
</TR>
               <TR>
               <TD COLSPAN="2"><FONT SIZE="2">IT Skills</FONT></TD>
               </TR>
               <TR>
<TD WIDTH="57"><FONT SIZE="2">Skill</FONT></TD>
<TD WIDTH="250"><FONT SIZE="2">Proficiency</FONT></TD>
</TR>
               <TR>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("Skill_1")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("Skill_Prof_1")); %></TD>
</TR>
               <TR>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("Skill_2")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("Skill_Prof_2")); %></TD>
</TR>
               <TR>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("Skill_3")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("Skill_Prof_3")); %></TD>
</TR>
               <TR>
<TD BGCOLOR="#FFFFFF" WIDTH="57"><% out.println(rs.getString("Skill_4")); %></TD>
<TD BGCOLOR="#FFFFFF" WIDTH="250"><% out.println(rs.getString("Skill_Prof_4")); %></TD>
</TR>
               </TABLE>
               </TABLE>
          </TABLE>
     </TABLE>
</TABLE>
<%
if(request.getParameter("RejectButton") != null) {
level = Integer.parseInt(rs.getString("Level_ID"));
level = 4;
String levelString = Integer.toString(level);
session.setAttribute("email", email);
session.setAttribute("level", levelString);
response.sendRedirect("CurrentStatus.jsp");
else if(request.getParameter("AcceptButton") != null) {
level = Integer.parseInt(rs.getString("Level_ID"));
if(level < 4) {
level = level + 1;
String levelString = Integer.toString(level);
session.setAttribute("email", email);
session.setAttribute("level", levelString);
else {
level = 4;
String levelString = Integer.toString(level);
session.setAttribute("email", email);
session.setAttribute("level", levelString);
response.sendRedirect("CurrentStatus.jsp");
st.close();
con.close();
%>
</FORM>
</BODY>
</HTML>
CurrentStatus.jsp
<%@ page import="java.sql.*, java.net.*" %>
<HTML>
<HEAD>
<TITLE>APPLICANT FORM</TITLE>
</HEAD>
<BODY BGCOLOR="#FFFFFF" TEXT="#000000">
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:fypproject","","");
Statement st = con.createStatement();
String level                = (String)session.getAttribute("level");
String email = (String)session.getAttribute("email");
String query = "UPDATE Login_Details SET Level_ID = '" + level + "' WHERE Email_Address = '" + email + "'";
st.executeUpdate(query);
%>
<DIV ALIGN = "center">
<H2> Candidate status has been moved to: <% out.println(level); %></H3>
</DIV>
</BODY>
</HTML>
<%
st.close();
con.close();
%>
any ideas at all??? please??! :o(

instead of using a submit input try using two button inputs, names can be the same.
<input type='button' value='accept' name='aButton' onClick='js_func("accept")'>
<input type='button' value='reject' name='aButton' onClick='js_func("reject")'>
write a javascript function and catch the value sent and redirect to a controller (a jsp or a servlet) which would re-route the request to your bean
function js_function(theValue)
window.location = "controller.jsp?action=" + theValue
this is how you can make a button act as a submit button. i guess this is your best bet.
cem.

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

After ugrade of my 2007 MacBook to OS X 10.6.8 my printers do not work anymore. Details see below any idea to solve issue? Thx Stefan

After ugrade of my 2007 MacBook to OS X 10.6.8 my printers do not work anymore, error code: "cgdpdftoraster: cupsRasterInterpretPPD had an error: unknown operator "Statusdict"!". Any idea how to solve this issue? Thx Stefan

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

HT1199 Help. Forward button on keyboard not working on itunes anymore. anyone have any ideas?

Forward button on keyboard not working on itunes anymore. This always used to work i don't know what has changed. Click on next track works also does the remote control.

If you are referring to the functional keys on top. do you press FN key together with the F7, F8 or F9? Does that work?
I hardly ever use the F keys as CMD_ARROW is much faster for me and SPACE bar stops or starts as long as iTunes app is in the foreground

My iPad not working in Bahamas - International Plan Purchased any Ideas?

I have the 64GB/3G iPad and I've purchased the international data plan while I was in the states.
I can not get 3G working on the iPad while the 3G on my iPhone works fine.
Any Ideas?
Thanks in Advance
Chris

Is it past the effective date you selected for your international data plan?
http://forums.wireless.att.com/t5/Apple/iPad-Wi-Fi-3G-Information/td-p/1925513
Try to get help from the roaming carrier in the Bahamas, BTC Customer Care: 242-302-7102

Face Time not working consistently from Kabul, Afghanistan. Any ideas?

I am in Kabul, Afghanistan and have an iPhone 4S that I can Face Time with my family successfully. They are in the US. I am calling their iPhone 4 and Macs. When I try calling other iPhones and/or Mac's (also in the US), I get the error message that their phones are not available. From email exchanges I have made, with the parties I am trying to call, it appears that they have done everything they need to do to Face Time successfully. In fact, they are able to Face Time with everyone else but me.
Where I am located, in order for Face Time to work, I have to have the wifi turned on, iPhone in Airplane mode, and cellular services turned off. Any other combination will not work. The fact that I can Face Time with some people tells me that this procedure does work.
The only difference I can see exists in my Contact list. People that I can face Time with, have a "Movie Camera Icon" on their contact page Face Time button. Everyone else does not. Does this mean anything?

Hi there lilalex2,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
-Griff W.

Surround Sound not working on Mac Pro (Early 2008)!

I'm writing this as my last ditch attempt to solve my problem.
Recently I bought a 5.1 Onkyo AV Receiver, model HT-R558 as for the audio output of my machine.
I have connected the device components, however when connected to my Mac using a TOSLINK cable, all i recieve is stereo sound through the front left, center, and front right speakers. - The rear speakers give no output, and the subwoofer only works in iTunes.
As far as I was aware the process was as follows:
Mac Pro with output set to Digital Out connected to the digital out port --> Optical/Toslink Cable --> connected to receiver (Onkyo HT-R558 through optical in on receiver.
I have followed several Knowledge Base articles with no success.
Is the Mac Pro actually capable of 5.1 sound output, or is it an added non-working feature?
I have tried a system utility called Perian, but no luck, also i have found articles saying this can be fixed with Terminal, no luck either.
If anyone has any advice on correctly connecting surround sound to my Mac I would be extremely grateful! I only hope there is something I have overlooked.
At the moment i am running the system using Pro Logic II, though it feels like a let down.

I found the problem, the digital out on my Mac Pro is only capable of outputting stereo, this appears to be an OS X 10.6.8 issue that would need to be addressed via a supplemental update.
I know DVD Player can output 5.1 when set up correctly, so can iTunes movies; unfortunately this appears to be a problem that only has few solutions.
1. Downgrade OS X to a version prior to 10.6.8 (however doing this causes incompatibility with my iOS devices.)
2. Add a PCI Express compatible sound card, or use an external card (requires additional hardware purchases.)
3. Use only stereo capable units with the machine (as anything with higher speaker configurations requires use of Pro Logic II from the receiver/amplifier; not to mention sounds terrible.)
Until, or if this is ever fixed I will stay with option 2, as it doesn't require use of additional software just to use audio, allows me to use the respective amplifier fully, and also sounds better.
Thank you for your advice, I just have to remember to be a little more careful when choosing audio products for use with Mac it seems.
I am closing this question.
Regards,
Peter.

Dual Monitor not working for Mac Pro (Early 2008)

Upon upgrading from Lion to Mountain Lion yesterday I lost the ability to use my secondary monitor. Checking in System Preferences it indicates that it only sees one monitor, but nothing has changed with my hardware configuration. Is anyone else having this problem?
Hardware specs:
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 26 GB 800 MHz DDR2 FB-DIMM
Graphics ATI Radeon X1900 XT 15 MB
Software OS X 10.8 (12A269)

Not sure if this has any relation to yours, but I thought I would throw it out there...
After installing Mountain Lion, the secondary monitor for my 27" iMac would not wake up after the computer slept. In the System Preferences, there was only the main display listed. The secondary monitor was visible from a cold boot, but disappeared once the computer slept and was woken up.
I found that waking the system with the Magic Trackpad would not also wake the second monitor. When I wake the computer by using the keyboard, the second monitor wakes normally! I've repeated this several times... Strange.

Ipad and iphone do not synch with my imac via wifi; any ideas?

Synchronising my contacts on the iphone and ipad with my imac seems to require me to connect using USB, then open iTunes; neither will synchronise via wifi. I have set both the iPhone and iPad to synch automatically when connected to power and via wifi to the imac, but it doesn't work.
I am running MAC OS 10.7.5 and iOS 6.1.3. Can anyone explain what's wrong? thanks

Bluetooth Pairing is not available, apart from Airdrop.

2 new radio remotes not working on 2 new iPods. Any ideas?

I bought 2 new video iPods 3 weeks ago from the Apple store in Florida. (1 black, 1 white - so I assume different batches.) They both worked fine with no problems until I came home and bought a radio remote in the UK.
The remote didn't work at all and seemed to drain the power from the iPod as soon as it was plugged in, the screen faded and the iPod switched off. The only way to get it on again was to unplug the radio and plug in the usb charger for a few seconds. This was the same with both iPods.
Called Apple who thought the remote was faulty so they sent out a new one. New one has just arrived and it does the same thing, again on both iPods.
Apple are sending out yet another remote, but I'm concerned there may be some sort of compatability issue with certain video iPods maybe? Would there be any difference between UK bought and USA bought items that could cause a problem? I don't really see how but it seems strange that it happens to both iPods. Maybe just sheer bad luck to get 2 faulty radios?
iPods are up to date btw - 1.2.1
Anyone any suggestions or had similar problems?
Windows XP Pro

Yip, back in the UK and no, no ipod stores near me, it's all done via the helpline and the PO.
The latest replacement radio arrived today. It works on the black iPod but not on the white one. It drains the power on the white one, as did the others.
I think I may have had 2 issues here....faulty radios but also a faulty iPod maybe.

Microphone is not working on my iMac early 2008. Any ideas?

Similar Messages

Maybe you are looking for