Microphone is very quiet

So I am currently using a Logitech G430 headset, and my skype seemed to make my microphone very quiet. I had not always had this issue, it just seemed to pop up one time. My mic is still picking up sound, just only when I hold it directly to my mouth. I have tested my mic multiple times and it works great, just doesn't seem to work on skype. It works on occasion and sometimes would fix itself if I plugged it in and unplugged it but so far it does not seem to work.

Hi
Did you check the microphone recording level?
The microphone level settings can be found in Microphone Level Utility.
Press and hold on the speaker icon on the task bar and select recording devices form the sub menu. Select Microphone and tab Properties.
On the level tab move the Microphone slider to increase or to decrease the microphone level.
If you feel the microphone volume level is inadequate, move the Microphone Boost slider to a higher level.
PS: this and other details about your device can be found in user manual ;) so read it if you want to know how your device functions and how to use it

Similar Messages

  • Satellite U400 - Internal microphone is too quiet

    I am running on Windows7 x64. I have downloaded latest sound drivers (4.98.6.61) and now is internal microphone very quiet although its volume is on max.
    I had Vista x64 before and everything was ok. I have tried Vista drivers on Windows 7, but nothing changed - still quiet mic.
    Thanks for an advice.

    Hi
    I had the same issue with my Satellite U400 but on Vista. After updating the sound driver and BIOS the issue did still exist.
    After searching a little bit here in the forum I activated the microphone boost and this was the solution! :)
    1.Open the "Control Panel" (Standard view)
    2.Click on "Hardware and Sound"
    3.Click on "Sound"
    4.Click on the "Recording" tab.
    5.Mark the Microphone and then press on the "Properties" button.
    6.Click on the Custom tab and set the check by Microphone Boost
    Check this!!

  • Right speaker very quiet...

    i have a inspire 2.1 2500, i've had this for a while, and for a while now, the speaker that i plug into the right port of the subwoofer is really silent. i have the music at a "normal" volume, not too loud but loud, and id have to put the speaker i pluged into the right port right next to my ear just to hear the music playing very very quietly. i've checked all the settings on my computer, i've tried using the onboard soundcard on my mobo, i checked everything! and im pretty sure its my subwoofer thats jacked up. i unscrewed the screws behind the subwoofer and tried to take it out, but could only pull it out of the box alittle bit, somethings blocking the thing! =[ but i could see the inside half of the ports and couldnt tell if anything was wrong with them, i dont have any knowledge of speaker parts or anything though...so i could very well be wrong =/
    can anyone help me out with this? =/

    That is not a speaker on the right side - it is the microphone... There is only one speaker - the one that you are hearing on the left...
    JB
    Message was edited by: Jorge*B

  • Very quiet sound in my Lumia 620

    Hello,
    I have a problem with a speaker to talk in my Lumia 620. I have installed Windows Phone 8.1. When I bought this phone sound from this speaker was loud but now after few mounths it is very quiet. My volume is set for max. What to do with it?
    Please help.

    With WP8.1 there are separate volume controls for different functions .. Hope you are setting them correctly ..
    See THIS

  • Bluetooth iPhone 4s car stereo very quiet

    Hi everyone, I was wondering if someone could help me with an audio problem. Sometimes when I connect by iPhone 4s to my car stereo via Bluetooth, the audio is very quiet. Even with my volume turned all the way up on my phone and car stereo. Then other times ill connect them and it'll play normal and very loud. And way to fix this so it's loud all the time?-(when's it's quiet I turn it all the way up and it's still like background noise...)
    TIA

    I have the same problem with my iPhone 5S in my Subaru.  Until someone can offer a fix, I am resorting to using FM, only.

  • Incoming ichat convo very quiet

    Hey Guys,
    Just trying to get a podcast going in GB3. Myself and a buddy are audio chatting on ichat, except he comes in quiet on my end. I have to turn up my system volume to a good 3/4 of the way to hear him properly.
    When trying to import into GB3 i hit the record button, the import ichat convo window comes up and we each get a track... but i am on both tracks... and so is he... but he is very very quiet. Now if we could get eachother on seperate tracks (like i thought would happen) i could probally boost the track volume of his track to make his volume slightly louder, but chances are it will be still on the quiet side.
    He is using a usb mic and i am using a line mic through a small mixer. We are both on powermac G5s.
    Basically how can i boost his volume on my end and how can we be on 2 seperate tracks in sound as well as the screen?
    Thanks in advance
    Ryan

    all the volumes are cranked on his end... and its still coming in quiet in garageband on my end... and its still doubling the voice tracks on each indivisual tracks.
    he trid on his garageband on his end (GB2) and its coming in loud and as it should....
    anyone have any ideas?

  • [solved] Sound very quiet

    Sorry, already solved.
    "amixer set Front unmute 100%" fixed the problem. Strangely enough, i muted and unmuted each and every playback device via alsamixer many times.
    If you have similar problems try these three commands:
    amixer set Master unmute 80%
    amixer set Front unmute 100%
    amixer set Headphone unmute 100%
    Hello,
    my sound is very very quiet. To hear something I have to turn my amplifier up to at least 1/2 volume. At that volume level it would usually be enough to be wake the neighbourhood.
    I checked with alsamixer if the sound output was muted but it isn't. What's strange is that the sound output worked just fine today but a restart suddenly the sound was very quiet like this.
    Any ideas what's causing this?
    Mainboard is MSI H55M-ED55 with sound chip ALC889.
    06:53:26 ~ > cat /proc/asound/cards
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xfbdf4000 irq 22
    Last edited by demian (2010-02-08 06:01:55)

    Hi Charrison21989,
    Welcome to the Apple Support Communities! I understand that you have been having some issues with the audio quality coming from the receiver on your iPhone 5. I suggest going through the steps in the following article to try and isolate and resolve the issue.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    I hope this helps,   
    -Joe

  • Very Quiet Audio During Playback

    Hi,
    Just trying out my iPod 5G and an Apple AV cable.
    Video is fine but audio is very very quiet. Have to have the iPod set to virtually full volume and TV up to about 50 (normal volume on TV is 12-15) to get anything like listenable audio.
    The videos are fine through headphones with sound when volume is set to approx 25%.
    I am using Handbrake on the Mac to encode into MPEG-4 format.
    Any ideas ???
    Regards
    NIALL 8-)
    iPod 5g 60gb Firmware 1.1.1

    This is the way it works for everybody, your unit is not malfunctioning.

  • Sound is very quiet !

    Hi
    I recently bought a zen mp3 from 32 GB
    but now I've put some songs on it and the sound is very quiet, even when I put it on 25 !
    my brother has a zen mp3 of 8 GB and his sound is very loud at 25.
    Does anyone knows how i can get the songs to play louder?
    thanks
    sjesches

    Hi,
    I had a similar problem with my ZEN, the sound was just too low for my requirements as I listen to it a lot along busy roads where there is a lot of noise. I assume that you have the European firmware on your ZEN, check it, the European firmware ends in an "e". If so, you might try downloading and installing the US firmware which you can download from the US site. Download the US firmware first before throwing out the European firmware, then install the US firmware. This is much louder than the Euopean firmware, I believe this is because in Europe the authorities want to protect their young people from ruining their hearing and therefore restrict the volume of players.
    Now that I have the US firmware on my ZEN I have no problem with the sound anymore.
    Have fun with your player!
    macqueline.

  • TS1630 ringtones on my iphone 3gs are very quiet volume at max

    I have recently been given a iphone 3gs. Everything works fine except the ringtones and alerts are very quiet. I have turned up the volume to max. but this has little or no effect. Any help would be appreciated otherwise I have a phone which is of no use because I can't hear it when someone is calling!!!!

    iPhone: Can't hear through the receiver or speakers

  • MSI-180: Radio is very quiet

    Hello
    I have the following problem with my MSI-180: The volume of the radio is very quiet. The volume level is much lower than for all other devices (like DVD, TV, etc). Even setting the volume of the Mixer in Windows to max is not enough to ajust the different volumes.
    Is there any possibility to arise the radio volume (registry, etc.)?
    Thanks for your help
    Patrik

    Picture Quality
    Composite -ok
    S-Video - good
    Component RGB - very good
    VGA - better
    DVI - best
    so S-Video will not give you the best picture quality. it has nothing to do with the drivers.
    how does the picture look on your VGA/DVI monitor?

  • Hp headset microphone is too quiet

    Hello, I just purchased an HP H2800 headset and i am trying to use it on skype. The Microphone is too quiet. i tried to setup the Mic in audio settings on Windows, but it fails.  Any suggestions?

    Hi
    I had the same issue with my Satellite U400 but on Vista. After updating the sound driver and BIOS the issue did still exist.
    After searching a little bit here in the forum I activated the microphone boost and this was the solution! :)
    1.Open the "Control Panel" (Standard view)
    2.Click on "Hardware and Sound"
    3.Click on "Sound"
    4.Click on the "Recording" tab.
    5.Mark the Microphone and then press on the "Properties" button.
    6.Click on the Custom tab and set the check by Microphone Boost
    Check this!!

  • My guitar is very quiet when trying to record? How can I make it louder?

    I just got a new iMac and am using GarageBand to record some guitar and it is very quiet even with everything maxed out (gain and volume on focusrite saffire pro 14, track and master volume, and amp sim volume). Is there anyway to make it louder? Chain is Fender Deluxe Lone Star Strat > Saffire Pro 14 > FireWire cord> iMac. Thank you.

    Hi The App,
    When you're plugged in, does the light that says "Inst" light up on the PRO 14?  This indicates an instrument level input, and can be activated through Saffire Mix Control.  Near the bottom of the window, make sure the channel your guitar is coming in through has "Inst" selected, rather than "line" (also make sure you turn down the gain before you do this).  Let me know if this solves your issue.
    Best Regards,
    David Tichauer // Focusrite Technical Support

  • Voice Recordings come out muffled and very quiet.

    The first few songs I made with my friends are clear and you can hear the voice perfectly and loudly. Now when I try to record voice its muffled and very very quiet no matter what. I've tried different voices, recording levels, but nothing seems to work. Does anyone know how to fix this? I don't think it's the mic because I can web chat fine.

    Are you talking about the iPod speaker? If so, does it work OK with headphones?
    There isn't much that you can do yourself to repair the iPod if there is damage inside.

  • 6230i suddenly started playing ringtone very quiet...

    Hi,
    I've got an MP3 ringtone, which used to work fine. All of a sudden, it's started playing very quietly for the first couple of seconds, and then gradually getting louder.
    I've got it set to maximum volume (5) and the "incoming call alert" to Ringing.
    Any idea how to get it back to ringing with some volume.

    Hi Kheldar
    Welcome to the Nokia support discussion boards
    The query you have has already been answered in the following thread
    http://discussions.nokia.co.uk/discussions/board/message?board.id=phones&message.id=39
    cheers
    Ajak

Maybe you are looking for

  • PDF Portfolio Cover - how to change this in Acrobat Pro 9?

    Hi all, in Windows folders PDF Portfolio files are displayed as follows: 1. Using common PDF icons (bad, because we cannot distinguish PDF from PDF Portfolio), or 2. If the folder allows larger pictures, then we see the standards Porfolio cover showi

  • How do I fix these glitches? If fixable...?

    Hello, I have the 4th gen iPod touch with the latest software, 5.0.1. It was running fine after the newest update, it was just a few weeks ago that it started acting up. Occasionally, the camera app will show a black screen... just a black screen. I

  • User profile service in SharePoint 2013

    Hi,      I have created multiple list views.I want to assign these views to HR,Finance,Marketing dept,etc. Can you help me to retrieve the dept from user profile service and  assign to the views.And when the user logged in,it allows only the correspo

  • Audio stutter in timeline

    I'm having some trouble with audio playback in the timeline in a HDV project. When I play the audio in the viewer, everything is just fine, but when I play it in the Timeline it stutters and seems to go just a fraction to slow (duration is the same t

  • Need Help - Error Mess

    "Setup is unable to detect a supported product on your system. Please ensure that your product is properlly installed before running setup program" After i installed the Driver from the Product CD & Played normal with it for two weeks now, i asked my