Microphone no longer works after upgrade to windows 8.1

After upgrade to windows 8.1 my internal microphone no longer works.
I tried installing updates suggested in other posts with similar driver problems but they did not work.
HPSupportSolutionsFramework-en-11.51.0048 did not work.
My internal microphone is IDT High Definition Audio Codec
When I go through the control panel and look at it - it shows a status of "not plugged in"
Please help
thanks

OK I am a little confused.
There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
However I just received the following email from you:
Hello gordml,
The questions you posted on the HP Support Forum recently received one or more answers.
Question: Microphone no longer works after upgrade to windows 8.1
Date: Sun Dec 21 01:01:56 PST 2014
View the answer(s).
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team"
Why would this be sent to me if there has been no recent replies on this issue?

Similar Messages

Sound no longer works after upgrade to Windows 8.1

System:
Operating System
Windows 8.1 64-bit
CPU
Intel Core i5 3330 @ 3.00GHz
23 °C
Ivy Bridge 22nm Technology
RAM
8.00GB Dual-Channel DDR3 (11-11-11-28)
Motherboard
LENOVO MAHOBAY (SOCKET 0)
18 °C
Audio
ASUS Xonar DGX Audio Device
I sucessfully upgrading to Windows 8.1 and everything was functioning after the upgrade. However, after the first time I restarted my system after the upgrade the intergrated soundcard no longer worked.
I attempted to remove and reinstall the RealTek audio driver, downloading the newest 8.1 compatible driver from the Lenovo support site.
The drive refused to installed, either via the executable or by manually installing the driver through a device manager upgrade.
So I attempted to install a stand alone soundcard, to no success.
In device manager this is displayed for both the integrated motherboard audio and the new Asus sound card:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code
52)
If I disable the driver driver signature enforcement, neither audio option works. Instead I get this error in device manager:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.
(Code 39)"
Attempting to update the driver in device manager, Windows tell me I am on the most up-to-date, recommended driver, yet at the same time refuses to
allow it to function.
Extremely frustrating.
Any help would be greatly appreciated.

I have also attempted to clear out the registry Upper/Lower Filters to no success.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}
At that registry key, in the right window, is there, under "Name", either an UpperFilters orLowerFilters value?
If so, for each of the UpperFilters and/or LowerFilters value, what is listed under "Data"?
There could be an improper entry at one of these values which may be causing the problem.

My Microphone is not working after upgrading to Windows 7 using Laptop Satellite L505D-S5965

Please I need your help. My laptop Satellite L505D-S5965 had vista and I got the upgrade for windows 7. However after the upgrade I noticed that the microphone is not working while the speaker are working fine. I have went to the sound right click and choosed recording device and found tha the realtalk is my driver and everything is fine there. when I change to stereo mix I got very bad noise.
can someone help please. please note that the microphone was working in vista operating system. Does Windows 7 has a bug in this regrad.
I also have another question my understanding is the model Satellite L505D-S5965 has no internal microphone is this is the case? I can plug in external mic into the jack provided for this but there is no built in microphone am I correct please advise?
thank you for all you great help

Hi
when you upgrade the operating system to windows 7 it just install the generic driver
copy and paste the link
http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_audio_realtek_TC50036500C.exe
let me know if it didnt work

Intel Graphics no longer works after upgrade to Windows 8.1

Upgraded to Windows 8.1. The Intel HD 4000 Graphics Driver no longer loads. Device manager reports an error (43). Can only use Generic Non PnP Monitor. Any word on when this will be fixed?
Driver version: 10.18.10.3316
Thinkpad W530

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that Intel graphics driver is not working in your Lenovo ThinkPad W530 after updating to Windows 8.1.
Try updating your chipset drivers and ensure that you have enabled onboard graphics in BIOS. Try to install Windows 8 driver and check if it helps.
This issue has been discussed at Intel community forums and they are working with Microsoft to get this issue fixed. Hope they will resolve the issue on priority and come up with an update. As of now, the only work around is to roll back the system to Windows 8 and wait for an update or patch.
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

IPhoto no longer work after upgrading to Mavericks.

My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

Script no longer works after Upgrade to 10.4.6

The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
Anyone else having Applescript problems with 10.4.6?
--Bob
tell application "Finder"
activate
set fname to selection as string
if fname contains "0." then
move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "1." then
move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "2." then
move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "3." then
move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "4." then
move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "5." then
move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "6." then
move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "7." then
move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "8." then
move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "9." then
move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end tell

I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
Jeff Johnson
Dual 1.2 GHz Mac OS X (10.4.6)
Dual 1.2 GHz

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

Ethernet LAN not working after upgrading to windows 8.1

After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

Reports no longer work after upgrading to SCCM 2012 R2

I upgraded my SCCM 2012 SP1 environment to R2 and reports no longer work. I've removed the site role, waited a day, and added it. I've also verified the account (used by the reporting site role) has access to the DB and can logon locally. The
problem still persists. Here's a copy/paste of the error:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Conversion failed when converting the nvarchar value 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXscrubbed' to data type int.
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I've tried many other TechNet solutions as well with no improvement:
http://social.technet.microsoft.com/Forums/en-US/ae08aa43-054d-47e7-99fb-c4f101962478/reports-not-working-after-upgrade-to-sccm-2012-r2-?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/77bad9b6-de0e-42d3-ae9f-e7c9d26b4330/reporting-error-after-upgrading-to-sccm-2012-r2?forum=configmanagergeneral
Any other thoughts on this?

So to be clear you have Done both the Mofcomp and Added the correct account to the Windows Authorization Access Group?
What is version of SQL are you using?
Is SSRS remote or local to CM12?
What service account are you using for SSRS?
Bases on the error message you are getting this within the console, Does the native SSRS report work? BTW I never recommend accessing the report via the console.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Microphone no longer works after upgrade to windows 8.1

Similar Messages

Maybe you are looking for