Microphone not working - Conexant 20561 Smartaudio HD

Hello~ I am using Windows 7 Ultimate on my Lenovo T500. My microphone suddenly stopped working. Why is that? It is not detecting any sound at all in the microphone setup screen or on skype even though it is the only device and it is selected. I have Conexant 20561 Smartaudio HD and drivers 4.92.12.0 released on 10/6/2009. It just recently stopped working. No sound is detected. Help! Thanks
Solved!
Go to Solution.

Hi,
I had the same problem.
My steps:
Control Panel > Speech Recognition > Advanced speech options > Microphone > Advanced...
And checked real Conexant 20561 SmartAudio.
After that action my microphone will start working properly.
Gidulis

Similar Messages

  • T400 Built-in Microphone not working?

    i recently tried to skype but it seems my microphone is not working. What could be the problem? The driver version for the Conexant 20561 Smartaudio HD is 4.92.12.0. Currently on windows 7. Anyone has this problem?

    Mine didn't work either, but I fixed it by doing the following (I'm running Windows XP): Go to Start menu->Accessories->Entertainment->Sound Recorder.  For the Mic in, make sure the box is checked.  Mine wasn't, but when I checked it, my mic started working.  Good luck.

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Delay while recording with conexant 20561 smartaudio hd

    Hi!
    I have a T500 20893PG, and I use the conexant 20561 smartaudio hd front port to record audio. But it lags a lot! I've tried to update the driver, but I already had the newest one. It's up to 1 second lag, and that's waaaaay too much for me.
    The Windows 7 audio driver troubleshoot didn't help neither.
    What to do?

    Hi all
    There are few causes and solutions to this problem. From what I know, SmartAudio limits the power of the devices to very minimal to prevent unnecessary damage.
    1. If the problem is exclusively caused by Skype.
    Go to Skype, log in. Then go to Tools, Options, General (Audio settings tab), 
    Uncheck: (They are enabled by Default)
    - Automatically adjust microphone settings
    - Automatically adjust speaker settings
    2. If it affects overall
    Go to Control Panel, Sound,  Communications tab
    When Windows detects communications activity: Choose
    - Do nothing
    Hope this resolve your issues.
    Cheers 
    Peter
    ThinkPad: W520 (4284-A99)
    =============================================
    Does someone’s post help you? Give them kudos as a reward, as they will do better to improve 
    Mark it as solved if the solution works for you, so it could be reference for others in the future 
    Dolby Home Theater v4 (Essential/IdeaPad/ThinkPad)
    http://forums.lenovo.com/t5/General-Discussion/Dol​by-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62​...

  • Conexant 20561 Smartaudio HD and 4 speakers

    I have W700ds what should have Conexant 20561 Smartaudio HD. I run Win7 64bit and I'm wondering if the official software and drivers support for 4 speakers? Sometimes the audio cards support mode where for example the "mic" jack is disconected and the "rear pair" of speakers can be connected to it. 
    Mi problem why I'm asking is that I had many issues with the software, mic quality, audio out post processing and found out that when I leave the generic windows drivers it works much much better than the manufacturers software. And I'm affraid I won't able to undo the changes so I would like ask here before I install it.
    Having support for 2 front speakers and 2 rear would make it worth to install it, but if it's not supported I don't want to taint my system with the software.
    Could somebody tell me who has the coneaxnt sotware running?
    Thank you Anton.
    Solved!
    Go to Solution.

    I'm pretty sure the Conexant chipset doesn't have that feature. I could be wrong.
    You'll probably have to use an ExpressCard or USB sound card with SPDIF or multiple speaker outputs.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • Internal Webcam and Microphone not working after Screen Fix

    I own a HP Envy Spectre XT Ultrabook, and last week I tried to use the webcam and the microphone for the first time in a few months.
    However I was shocked to find that Skype kept saying that the webcam was not detected. The microphone also could not register any sound.
    Device Manager did not show any imaging devices or the webcamera, even after setting it to view non-present devices.
    A check using msinfo32 did not review the webcamera either, and there were no problem devices.
    Control Panel >> Sound showed that the Internal Microphone using IDT High Definition Audio Codec was enabled and working, however it could not detect any sound. All drivers are checked to be up-to-date.
    I suspect this has something to do with the screen repair last month which a HP on-site technician came down to replace my screen, although I cannot be 100% sure. Although the screen is now working, the technician did not do a good job reassembling the screen - the bottom left corner of the screen cover has not be able to attach properly to the screen. 
    I have gone through my BIOS setup to make sure that there is no webcam disabled.
    I have tried rolling-back and reinstalling the drivers for the microphone but it did not work.
    I have tried uninstalling CyberLink YouCam (laptop preinstalled webcam software).
    Please help, these two components are very important to me as I am going overseas soon. The laptop is still under warranty.

    Hey ajun,
    Thank you very much for the information!
    For troubleshooting your Webcam, I would suggest taking a look at the document Webcam Troubleshooting (Windows 7). I would suggest the two options Video does not appear in your webcam software (such as YouCam, Skype, Messenger, ect.), and Webcam is not listed in Device Manager.
    For your internal microphone not working either, please take a look at the document Resolving Microphone and Line-in Problems (Windows 7). From this document, I would suggest following the top two symptoms.
    Please let me know the outcome of these troubleshooting steps.
    Good luck, and have a great day!
    I worked on behalf of HP

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Internal Microphone not working for L505D-S5983 (PLEASE HELP!)

    Hi,
    I can't seem to get my internal microphone to work. I have enabled it under Sound->Manage Audio Devices
    ->Recording tab. However the green vertical bar does not detect any voice. After setting the Microphone boost to +40dB, it detected some noise (since it has some green light) but I realized it wasn't detecting my voice. Since this did not work, I re-set the Microphone boost to only +10dB.  I only have one internal microphone and no external microphone. 
    I have seen many postings on internal microphones not working on Toshiba laptops but couldn't find a solution to mine. Can someone please help? I think it's about time that Toshiba fix this issue after the countless complaints.
    FM.

    No mentions of reinstalling the sound driver. That sometimes turns on the microphone.
    Satellite L505D-S5983
       Realtek Audio Driver for Windows 7 (32/64)
    Satellite L505-S5988
       Realtek Audio Driver for Windows 7 (32/64)
    Satellite M500-ST6421
       Realtek Audio Driver for Windows Vista (32bit/64bit)
    -Jerry

  • USB webcam microphone not working with Starcraft 2 voice chat

    =USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
    I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
    in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
    I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
    Any thoughts on this or am I SOL and have to find myself a shiny new headset?

    I had the same problem. You need to check the device index of your USB mic.
    In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
    Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
    Remember, that the indexing is 0 based.
    The sound framework make the assumption that the index is 0.
    Hope that helps.

  • Why is my microphone not working and wifi not being able to search for connections.

    somebody please help. why is my microphone not working? i have replaced the charging port connector, and people cant hear me still. and my wifi ,even though its on, it still unable to search for conections even after i have repladed the wifi antenna. what can this be or what parts must i change out inorder to work.

    i appreciate for the response, ummm, ill check the ring on the shield(is it the shield on theupper left side of the iphone 4 that protects all the ribbons?) and actually is backwards with the speake. i have two scenarios. on one iphone4, people can hear me, but when i put it on speaker p hone, they can't hear me. the other iPhone 4, people cant heare either in speaker mode or regular call. i have replaced.the speaker box, i have replaced.the mic/cable connector as well and nothing on either cases. for sure.there is no water damage. what can ot be?

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Microphone not working Lenovo Y 50-70

    Hello,
    I updated my windows 8.1 and after the update my built in microphone didn't work any more, in skype recording or in anything that uses the microphone. When i go to sending and tried to test it, it does nothing, like it`s on mute.
    The sound meter doesn't move at all, it worked until i updated the Windows and after the update was applied it did not work anymore. i uninstalled the sound card driver and installed it again, and it did not work the speakers work but the mic didnt work, i can not use the mic in skype or any app/program that uses the mic.
    Thanks.

    Hi Gogox1,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issues with microphone not working on your Lenovo  Y50-70 laptop.
    Please try connecting an external microphone and check for the issue, try to update the drivers from device manager.
    a) Press“Windows Logo” + “X”keys on the keyboard.
    b)Click on “Device Manager”.
    c)Search for the Sound Card from the device list and right click on it and select “Update Driver Software”.
    d)Follow the on-screen instructions and complete the installation of the latest driver.
    e) If no driver updates are available, you may also search for the updated sound card drivers in the“Drivers” and“DriverStore”folders in the location “C:/Windows/System32” by selecting the option“Browse my computer for Driver Software”.
     Click here for the driver.
    Hope this helps. Do post back if the issue persists!
    Best regards,       
    Ashwin. S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My Aspire 5750-6438 built in microphone not working.

    My Aspire 5750-6438 built in microphone not working. My OS is windows 7 64-bit. I have updated all the driver. Built in microphone is not even recognized in the sound setting.

    welly267,
    Go into the device manager and check to see if there is a yellow or red icon next to your built-in microphone. If there is a red one, it's probably disabled, see if you can enable it. If it is yellow, right click to uninstall it, then restart your notebook to see if it installs correct and starts working. Look through these steps if it does start showing up in the sound manager.
    If it does not, you can try to remember when it worked last and try a system restore. If you cannot remember, you might have a hardware problem or can try to perform a recovery as a last resort to see if that solves it.

  • Microphone not working on iphone

    Microphone only works when on speaker phone.

    Hi,
    I had the same issue here. bottom microphone not working on my iPhone4. tested an dtried some different apps and came up with the following:
    during voice call: bottom mic not working
    during facetime: YES other side can hear me
    memorecorder: YES sound is recorded
    video: YES sound is recorded
    I've searched around the web and the apple support pages, and found some simple options to be taken to resolve the issue:
    1 clean out the 2nd (noise cancellation) microphone (which is the little pinhole right beside the earphone jack)
    2 restart the device (eliminating virtually all software / app malfunctions)
    3 reset network settings in settings menu (eliminating network issues)
    4 full factory reset on iPhone4 (make sure to back it up properly before) (why should this be the resolution if the restart didn't do it before?).
    5 open up the backside and insert a little piece of cardboard (about 160gr/m2) as per the attached video:
    http://www.youtube.com/watch?v=0jhWxYTVxe4&feature=related
    6 go to the apple store / make an appointment with the genius bar
    neither 1, 2 nor 3 resolved my issue with the bottom mic during voice calls (I still could hear the other side, they could here nothing, or some static and crackling from my side). as gathered the 4th possiblity would not to make the difference (i got convinced this was more a hardware than software issue), i jumped to option 5.
    AND IT WORKS NOW!!! yippieeeee (what would an iPHONE be if you can't call....)
    all you need is a steady hand, good eyes and a ph00 or ph000 screwdriver.

Maybe you are looking for

  • TS2621 pop 3 not connecting to server

    my emails have stopped the msge i am getting is pop3 can not connect to server pls help

  • Question about binary XML

    It seems the binary XML storage can be schema based or non-schema based. What are the advantages of schema based over non-schema based? My XML doc could be very big, and I need to add/modify some elements without loading the whole XML doc in memory f

  • Trace the value in which table

    Hi, i have 3 tables T1 node_id T2 node_id, object_type T3 node_id, object_type my requirement is T1 node_id exists in which table(T2 or T3). If T1 node_id exists in T2 then return T2 object_type else return T3 object_type can you please help me to ac

  • Bdoc Fail Alert in Microsoft Outlook

    Dear All, We have one query regarding CRM and Outlook integration. If Bdoc fails to transfer data from ECC to CRM then system should send a e-mail to respective person. Please let me know what configuration need to be done for the same... Regards, RA

  • "Please Enable Java" error when attempting to join GoToMeeting webinar in Firefox 4.

    Since upgrading to Firefox 4 I'm unable to join GoToMeeting webinars, such as https://www2.gotomeeting.com/join/298237491/106133365 I receive a "Please Enable Java" error, see this URL for an example: https://www2.gotomeeting.com/island/joinError?e=J