Microphone not working when using a phone call, Microphone not working when using a phone call

Microphone is not working when i use my iphone 4, first day when i installed a iOS 7 , was all good, second day this happened. Please help me. When i use a Viber microphone working. I think this is not a hardwear problem.

Hi Mike
That was very helpful thank you.
I did as you suggested and found the "switch" was already turned on green. I swiched it off waited a while then turned it back on and microphone was back in use in viber. I have a sneaky feeling I may have to do this again in the future. I am not aware that I did anything that led to the microphone going off, but having said that I have only had the phone for a few days so may have done something when checking it out.
The phone has been a lot of fun after replacing my ancient Nokia with it. That Nokia worked in Morse code!
Best wishes
Rob

Similar Messages

My microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

my microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

HI there,
Please see the video link below to learn how to remove the pairing from your iPhone, powercycle the phone, reset the BlueAnt Q2 (please check which BlueAnt device you have and reset as approopriate) and then pair with iPhone again.
http://www.myblueant.com/support/videos/Q2/iPhone/remove_and_reset/
If this does not resolve your problem please contact our customer support team on +1 855 9 BLUEANT or +1 855 9 2583 268.
Hope this helps
Scott

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphon

I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s on February 2013 at the Grand Central Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Thanks

Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s con February 2013 in the Grand Central (NYC - USA) Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Or I need to find a way to take it to the US, where I bought it.
Thanks!!!

You will need to return the phone to the US. iPhone warranty is only good in the country of purchase, with the exception of the EU.

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine.

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??

hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport

When I try to use my phone, it does not light and I cannot see the messages or who is calling

When my phone rings or I get a message, the phone does not light up, therefore I cannot see anything on my phone

My phone does not light up at all, when I turn it on or anytime.

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

*Ralph Johns* writes:
"Your options are:
Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
Do you mean a trial account from .Mac? (DotMac)
"Get an AIM Screen name and set it to Display what you want as you set it up.
The Screen name can be whatever yu want but you can also set it to display something else as well."
I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
Thanks very much for taking the time to reply, though.

Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen. Even ending a call is difficult as the screen blanks out within seconds

I have to use the Keypad a lot when making calls. Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out. Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions. Back and forth just trying to enter the options is a pain. Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
If I use the Speaker function the keypad works; the speakler phone is not alway appropriate.
It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle. This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates. It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem.
I'm not sure if it's a hardware or software (design) issue.

It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?

A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

My handoff phone call does not work with Yosemite while other apps are working

I have upgraded to Yosemite and tried the handoff with my iPhone 6. First time I tested phone call which worked. I switched off the Mac and went out. When I came back the handoff phone call didn't work anymore, while Safari, Email, etc. are still working via handoff.
Thanks for any help in advance

The iPhone calling feature is not called, "Handoff." Using the terminology incorrectly only adds to the problem. "Handoff," is the feature where apps share documents.
Both "Phone" and "Handoff" are separate features under "Continuity."
This is "Handoff":
This is "Phone" calling:
Continuity features (Scroll up and down to see all): http://www.apple.com/osx/continuity/

Caller Id not working nothing showing in my settings under phone to activate or deactivate

HOw do I turn on caller I'd if I do not have option in phone settings used to have it not sure what happened

I believe the way Caller ID works on the iPhone is that it will check your contacts for the number calling and then display their contact details. Therefore, you need to make sure you have accurate details for everyone that may call you. If the caller does not want their Caller ID shown, your iPhone will show number as Blocked.
If it's your Caller ID you want to hide or show, to to Settings > Phone > Show My Caller ID > Slide to On

I have this problem as well. The screen is black . i can.t get it to respond.Power home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn'

The screen is black . i can.t get it to respond.Power + home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn't ring/screen did not light up. Its a iphone 4. Any ideas how to fix this?

If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

HT1937 i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears The SIM card inserted in this iPhone does not appear to be supported This iPhone is not currently setup to work with carrier you're attempting to use. Please

i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
The SIM card inserted in this iPhone does not appear to be supported
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.

It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps!

Microphone not working when using a phone call, Microphone not working when using a phone call

Similar Messages

Maybe you are looking for