Microphone not working with speaker phone

Hi Guys
My Normal Microphone is working fine on normal calls but when using speaker phone nobody can hear me. Also when using APPS like Fring or Viber
Microphone doesnt work have to use headset.
Very annoying Please help
Please Help!!!!!!
Norman

I recently bought an iphone 4s from bangkok. I am a resident of new delhi. I was sold the phone by telling that its a product of international one year warranty so need not to worry.
As i started using the phone, I have realised that the microphone of the phone doesnt work. I keep on speaking but noone can listen to me on the other side. I tried headphone and it was fine. I tried speaker phone with mic on top and it was fine.
I called apple to find out that this is a replaced handset which has been replaced by Apple.
After all the ifs and buts, It was agreed with them that it is still a product of Apple and is under one year warranty. They have agreed for replacement but only if I can take this phone to a apple store in Korea or Australia. Which is highly impossible for me.
I wonder what to do. Whether to speak with apple again to see if they can provide replacement in New Delhi itself, or ask a local technical expert to repair it for me.?
Kindly advice what should I do to get my mic working fine.
Sandeep Agarwal
[email protected]

Similar Messages

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

USB webcam microphone not working with Starcraft 2 voice chat

=USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
Any thoughts on this or am I SOL and have to find myself a shiny new headset?

I had the same problem. You need to check the device index of your USB mic.
In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
Remember, that the indexing is 0 based.
The sound framework make the assumption that the index is 0.
Hope that helps.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

My brother have given me his I-phone3, But he lives in US, he has given his phone in India, The sim card is not working with the phone. What should I need to do.?

My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?

Send it back to him and have him unlock the phone for you so you can use it with your carrier.

Microphone not working during the phone calls

Hi dear colleagues,
I've been using my STL100-2 for 3 weeks and suddenly my microphone stopped working during the phone calls.
It is 100% not a hardware problem because voice input works fine.
The microphone works correctly when I turn the speaker on. And when I use the headset as well.
What is wrong there? I tried hard reset, flashed my BB to the latest 10.2 and it didn't solve my problem: the other side could not hear me.b
Please, help me as I cannot do a very simple thing - make calls on my phone without those freaky tricks.
Thank you!

I have a similar problem, I found that it worked ok after I made a Skype call to the phone or if I called the phone from my playbook using video chat it would seem to start working, then it got worse and I found if I squeezed near the mick it would work ok. I also saw another thread where they had similar problems and solutions were possibly linked to loose screws on the plastic casing around the area of the mic as the author suggests it could be an assembly issue. I plan to check mine when I get to work tomorrow as I have no screw drivers small enough on my person right now. Anyway try it you never know it may give you a clue to the problem.
cheers.....

Airplay is not working with my phone and apple tv. airplay icon no longer comes up on phone

airplay is not working on my phone. icon no longer shows up. cant play music or videos on tv from phone anymore

As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

Shure Earphones (SE115m+) Microphone Not Working with OS X 10.6.6

Since I upgraded my MacBook Pro to OS X 10.6.6 the microphone on my Shure Earphones no longer works, or is even detected in the Sound preferences. (Worked flawlessly with OS X 10.5.x). Kind of surprising since they sell them at the Apple store specifically for their compatibility.
Shure Customer support insists it's Apple's problem:
"Sorry, we have not encountered this problem before. There is no firmware or software in the SE115m+, so the change in performance has to be on the Apple side.
Here is complete technical data on the "M+" product. Supply it to Apple and ask for their comments.
Answer Title: SE115M+ Basic Features and Operation
Answer Link: http://shure.custhelp.com/app/answers/detail/a_id/3852"
Also note that the volume control on these earphones does not work with the iPhone 3G.
Anyone know of any solutions?

Try resetting the PRAM.
Info here:
http://docs.info.apple.com/article.html?artnum=2238

Microphone not working with speakerphone

I recently purchased a iPhone 4 which is pre-owned. I soon discovered that the microphone is not working when ever I'm using speakerphone.
The microphone works fine otherwise and I can hear the call fine when in speakerphone mode. The problem is only with the microphone not working while in speakerphone mode. Based on some initial Google searches, I can see this is a relatively common issue on iPhones (4 & 4s models) but have not seen a way to resolve. Please help me resolve.

This may be relevant. I've been getting warnings "Device storage almost full" recently - even though I have an SD card that is almost empty. I suppose the device doesn't know to automatically use that for any downloaded/photos, etc.
In any case, I made some room, but is it possible that "core" stuff may have been overwritten (obviously some kind of s/w bug if so). How likely would this scenario be? I realize that anything is possible, including a meteor strike - but I was curious whether this is something that is "realitiscally" likely with the current BB OS.
Also, if I back up my data, do an OS reload, and then restore my data - is there a chance that the problem might come back? (given that the data I will back up now will have "more space" than when the warnings started coming, since I deleted some stuff).
Thanks again.

IMessage not working with my phone number.

Okay, so I lost my phone and i deleted everything on it via findmyiphone because i didn't have a password, well i recovered it and restored it from my last backup, my iMessage stopped working with my phone number and only works with my email. I've tried turning off and on imessage, shutting it off and on again, even resetting it, still nothing. any ideas on how to help?

Hello Jonahfromnm,
You may need to unlink, then relink your phone number with your Apple ID.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
Allen

Speaker Working but microphone not working with VT1708/A Azalia HDAC

Hi,
I freshly installed 64-bit Arch on my Desktop.
2.6.32-ARCH #1 SMP PREEMPT Thu Jan 7 22:28:29 CET 2010 x86_64 AMD Athlon(tm) 64 Processor 3500+ AuthenticAMD GNU/Linux
I configured alsa as said in
http://wiki.archlinux.org/index.php/Adv … chitecture
I can get sound through the speakers but i cannot use my mic.
I tried to record using audacity and it did not work. Also it does not work in skype.
Could Some one please help me trouble shoot this problem?
Thanks
Siju
These are my Configurations.
Alsa Packages installed
$ pacman -Q |grep alsa
alsa-lib 1.0.22-1
alsa-oss 1.0.17-1
alsa-utils 1.0.22-2
lib32-alsa-lib 1.0.22-1
Driver Module Names
$ ls -l /sys/module/snd/holders
total 0
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hda_codec -> ../../snd_hda_codec
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hda_codec_analog -> ../../snd_hda_codec_analog
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hda_intel -> ../../snd_hda_intel
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hwdep -> ../../snd_hwdep
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_mixer_oss -> ../../snd_mixer_oss
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_pcm -> ../../snd_pcm
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_pcm_oss -> ../../snd_pcm_oss
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_seq -> ../../snd_seq
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_seq_device -> ../../snd_seq_device
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_seq_oss -> ../../snd_seq_oss
lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_timer -> ../../snd_timer
Modprobe Configuration
$ cat /etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
options snd-hda-intel index=0
In /etc/rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(fuse snd-hda-intel)
Sound modules loaded.
$ lsmod|grep '^snd' | column -t
snd_hda_codec_analog 69995 1
snd_seq_dummy 1439 0
snd_seq_oss 29023 0
snd_seq_midi_event 5316 1 snd_seq_oss
snd_hda_intel 21586 0
snd_seq 50558 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec 63659 2 snd_hda_codec_analog,snd_hda_intel
snd_pcm_oss 39011 0
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 70318 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_mixer_oss 17299 1 snd_pcm_oss
snd_timer 18799 2 snd_seq,snd_pcm
snd 57408 11 snd_hda_codec_analog,snd_seq_oss,snd_hda_intel,snd_seq,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_pcm,snd_mixer_oss,snd_timer
snd_page_alloc 7033 2 snd_hda_intel,snd_pcm
Contents of /dev/snd
$ lsmod|grep '^snd' | column -t
snd_hda_codec_analog 69995 1
snd_seq_dummy 1439 0
snd_seq_oss 29023 0
snd_seq_midi_event 5316 1 snd_seq_oss
snd_hda_intel 21586 0
snd_seq 50558 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec 63659 2 snd_hda_codec_analog,snd_hda_intel
snd_pcm_oss 39011 0
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 70318 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_mixer_oss 17299 1 snd_pcm_oss
snd_timer 18799 2 snd_seq,snd_pcm
snd 57408 11 snd_hda_codec_analog,snd_seq_oss,snd_hda_intel,snd_seq,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_pcm,snd_mixer_oss,snd_timer
snd_page_alloc 7033 2 snd_hda_intel,snd_pcm
All channels are unmuted
$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [on]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Phone',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 15 [100%] [0.00dB] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mono',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 0 [0%] [-46.50dB] [off]
Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Stereo Downmix',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [off]
Front Right: Playback [off]
Groups the user is a part of
$ cat /etc/group |grep sgeorge
wheel:x:10:root,sgeorge
video:x:91:sgeorge
audio:x:92:sgeorge
optical:x:93:hal,sgeorge
storage:x:95:hal,sgeorge
lspci
$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. Device 6290
00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 RAID bus controller: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller)

Same problem here...
2.6.32-ARCH #1 SMP PREEMPT Fri Jan 29 08:50:05 UTC 2010 i686 Genuine Intel(R) CPU T2080 @ 1.73GHz GenuineIntel GNU/Linux
Module Size Used by
aes_i586 6880 1
aes_generic 25834 1 aes_i586
ipv6 237532 12
arc4 1058 2
ecb 1545 2
b43 154501 0
mac80211 149018 1 b43
cfg80211 106663 2 b43,mac80211
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_hda_codec_idt 43564 1
snd_seq_midi_event 4452 1 snd_seq_oss
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
joydev 7768 0
i915 264228 2
drm_kms_helper 21971 1 i915
snd_hda_intel 18793 3
snd_hda_codec 56728 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5102 1 snd_hda_codec
b44 24073 0
sdhci_pci 4910 0
firewire_ohci 20266 0
drm 126588 3 i915,drm_kms_helper
i2c_algo_bit 4219 1 i915
sdhci 13921 1 sdhci_pci
snd_pcm 57479 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
firewire_core 37529 1 firewire_ohci
ssb 39958 2 b43,b44
iTCO_wdt 7577 0
mmc_core 45164 3 b43,sdhci,ssb
pcmcia 27513 2 b43,ssb
crc_itu_t 1041 1 firewire_core
mii 3218 1 b44
led_class 1933 2 b43,sdhci
iTCO_vendor_support 1453 1 iTCO_wdt
snd_timer 16117 2 snd_seq,snd_pcm
video 14871 1 i915
i2c_i801 7122 0
output 1404 1 video
psmouse 56309 0
thermal 9326 0
battery 7328 0
uhci_hcd 19124 0
dell_laptop 1745 0
pcmcia_core 25643 3 b43,ssb,pcmcia
ac 2255 0
wmi 4083 0
processor 25790 2
snd 43847 17 snd_seq_oss,snd_hda_codec_idt,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
i2c_core 15369 4 i915,drm,i2c_algo_bit,i2c_i801
button 3638 1 i915
ehci_hcd 31594 0
rfkill 12320 2 cfg80211,dell_laptop
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
sg 21079 0
intel_agp 23225 1
agpgart 23331 2 drm,intel_agp
serio_raw 3620 0
usbcore 118921 3 uhci_hcd,ehci_hcd
dcdbas 4408 1 dell_laptop
evdev 6970 14
vboxdrv 135347 0
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
ext3 113026 2
jbd 38906 1 ext3
mbcache 4278 1 ext3
sr_mod 13161 0
cdrom 31625 1 sr_mod
sd_mod 24101 4
pata_acpi 2264 0
ata_piix 17725 3
ata_generic 2235 0
libata 135162 3 pata_acpi,ata_piix,ata_generic
scsi_mod 78933 4 sg,sr_mod,sd_mod,libata
MODULES=(!pcspkr vboxdrv)
no changes on config files except rc.conf
Has anyone filed a bug yet?

Why does my imessage not work with some phones

Its come to my attention that with some Iphone 4s and Iphone 5 users my imessage as well as facetime does not work. Why is this?

LilEther wrote:
Why is this?
How would we know? We're not in possession of their or your phone to troubleshoot or see how it's configured.

Internal microphone not working with Windows 7 Enterprise on dx6650

Hi. I recently upgraded my HP Pavilion dx6650 to Windows 7 Enterprise (final version, non beta). Everything worked fine but the internal microphone that is not working.Thank you in advance.

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Microphone not working with Skype

Hi,
I've just got a new Intel Core Duo Mac mini and want to run the latest edition of skype. Everything works except the microphone. I tested it using Skype's echo123 which allows you to leave a message for 10 seconds and then plays back with silence. Hmmm.
I have not tried or installed any other programs and I can see in the settings that the microphone should be used. Its not my microphone because it works on my Windows laptop.
Anyone had any luck?
Intel Core Duo Mac Mini Mac OS X (10.4.5) 1.66Ghz 512Mb 80GbHD

Hello,
Macintosh computers require an "Amplified" microphone.
These are rare items in your local stores which cater to the PC majority.
An amplified Microphone will have a battery in it (like a AAA or AA battery).
PC's have a separate Microphone and Audio Input line.
Mac's just have an Audio Input line.
With an Audio Input line, you must have a "Line-Level" audio signal. This is the level of audio typically sent through a Stereo component's CD-Player or Tape Deck (such as when connecting an external CD-Player to a component stereo with RCA cables). This would be the audio level present on the RCA cables.
If you are using a Microphone which is not amplified, then you need a pre-amplifier to sit between the Microphone and your audio input line.
Given the cost and additional wiring mess of a pre-amplifier, it is generally better to just purchase an amplified microphone. They are available if you look.
I used to sell them back when I had a computer business, I think I sold them around $15 to $20 compared to $5 or $10 for an unamplified microphone.
The reason that you can use your other microphone with a PC is that the PC amplifies it's Microphone port.
If you are handy with electronics, here's a document on how to build your own pre-amp circuit:
http://www.epanorama.net/circuits/micamp.html
If you are not up to the task of building a pre-amp for your microphone, then I would either purchase an Amplified Microphone (with a battery), or buy a pre-amplifier (usually around $50 to $70 for a low-end pre-amp).
Keep in mind that not all so-called "Amplified Microphones" are really self-powered and pre-amplified. Make sure it has it's own battery if there is any chance it is going to be able to work with your Mac. It needs to amplify it's own signal prior to sending it to the Macintosh for it to work for you.
One external solution around $120 is this simple and compact pre-amp:
http://www.microphones.com/microphonegroup.cfm?URLID=Preamp-Series
I've used other solutions that were only around $60, but they take-up my whole desk. So, I guess there is a price for convenience.
A self-powered microphone would be the most elegant solution though.
Here's a cheap ($50) solution for a self-powered microphone:
http://www.jr.com/JRProductPage.process?Product=24501
There are also headphone-mounted solutions available as well.
There are also some USB solutions that people have been using for Mac's without Audio-in ports.
The USB solutions are essentially a Microphone port that plugs into your USB port. They are reportedly pretty good. But, some people have reported a delay in their recordings (particularly with music recording). So, that may or may not be an option for you.
One USB solution is:
http://www.griffintechnology.com/products/imic2/
I hope you find this information helpful.

Audigy 4 - microphone not working with Ventr

Hello,?I have a brand-new SB Audigy 4. Pretty much everything works all right; I use headphones and I can hear everything just fine. However, I use a voice-chatting program called Ventrilo, and for some reason my friends cannot hear me speaking into my mic while I'm using that program. All of the Ventrilo settings are correct (confirmed working with another sound card). ?When I go to Sound and Audio Devices on the control panel, and go to the Voice tab, and click on the "Test Hardware" button, my mic will then work for literally about one minute (i.e. my friends can hear me via the program again). After that, they can no longer hear me because my mic has stopped working again. I have eliminated all other program factors, have updated my drivers, etc., and nothing works. I see that there are other people who have posted on this board with the same problem and have gotten basically no helpful answers. I have tried all of the solutions suggested to them as well, such as disabling my onboard audio, checking my BIOS for IRQ conflicts, doing a clean boot, reinstalling my drivers, and nothing worked for me. Here is a SS of my audio mixer in case someone needs to see it. http://www.theglasswolf.com/audiomixer.jpg? Note, the S/PDF-in and Auxiliary controls are unmuted right now because I was trying EVERYTHING to fix this issue. They normally would be?X-ed out. Is there anything that can be done, or is there some kind of permanent, unfixable conflict with Ventrilo/Teamspeak and the Audigy 4?

Hey guys,
I do have the same problem and it makes me realy mad. I own the Audigy 2 ZS, what is a cool (verry expensi've soundcard in my country) soundcard and it doesnt work with Team speak. I do need it pretty much for Counter strike play.
Mic is ok, its on and pluged correctly. WIN XP does not even detect my mic in the hw check. Team speak work for a few minutes when I use Creative Restere Defaults, but afer I switch to the aplication (game) I want to use it for, Mic stop to work and I can only hear others.
Pleeeeees Ill apriciate any sugestions.
icq: 340-884-642

Microphone not working with speaker phone

Similar Messages

Maybe you are looking for